Specific ations - Moen
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have.
DESCRIPTION • • • • •
Metal construction with various finishes identified by suffix Flexible supplies with 3/8” compression fittings Includes metal pop-up waste assembly Includes hot and cold temperature indicator Includes optional 3 hole deck plate (escutcheon)
OPERATION • •
Lever style handle Temperature controlled by 100° arc of handle travel
FLOW •
Water usage is limited to these maximum flow rates as indicated by the corresponding product markings ° 1.2 gpm max (4.5L/min) at 60 psi
KINGSLEY™ Single-Handle Lavatory Faucet
CARTRIDGE •
1255™ Duralast™ cartridge
Models: 6102 series
STANDARDS • • • • •
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein Certified to NSF 61/9 & 372 Products marked with 1.2 gpm are compliant with California water efficiency regulations Complies with California Proposition 65 and with the Federal Safe Drinking Water Act ADA
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA. *Use A1616 Extension Kit for Vessel Sink Applications
for lever handle
WARRANTY • •
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations
14-1/2" (369mm) OPEN POSITION
7-3/4" (197mm) 5.309" (135mm)
OPTIONAL ESCUTCHEON 6-1/4" X 2-1/2" (158mm) X (64mm)
8-1/2" (216mm) OPEN POSITION
Back Splash
ESCUTCHEON DIA. 2-5/16" (59mm) 3" (77mm) MAX.
**6-7/8" (175mm) Vessel Extension x2
2-1/2" min for lift rod operation
3-1/8" (80mm) MAX.
26-3/8" (700mm)
20-3/8" (517mm)
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
S p e c i f i c a t i o n s DESCRIPTION • • • • •
Metal construction with various finishes identified by suffix Flexible supplies with 3/8” compression fittings Includes metal pop-up waste assembly Includes hot and cold temperature indicator Includes optional 3 hole deck plate (escutcheon)
OPERATION • •
Lever style handle Temperature controlled by 100° arc of handle travel
FLOW •
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
KINGSLEY™ Single-Handle Lavatory Faucet
CARTRIDGE •
1255™ Duralast™ cartridge
STANDARDS • •
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, NSF61/9& 372, and all applicable requirements referenced therein Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
•
ADA
Models: 6102 series NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA.
for lever handle
WARRANTY • •
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations
*Use A1616 Extension Kit for Vessel Sink Applications
14-1/2" (369mm) OPEN POSITION
7-3/4" (197mm) 5.309" (135mm)
OPTIONAL ESCUTCHEON 6-1/4" X 2-1/2" (158mm) X (64mm)
8-1/2" (216mm) OPEN POSITION
Back Splash
ESCUTCHEON DIA. 2-5/16" (59mm) 3" (77mm) MAX.
**6-7/8" (175mm) Vessel Extension x2
2-1/2" min for lift rod operation
3-1/8" (80mm) MAX.
26-3/8" (700mm)
20-3/8" (517mm)
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
S p e c i f i c a t i o n s DESCRIPTION • • • • •
Metal construction with various finishes identified by suffix 1/2" IPS connections Includes metal pop-up waste assembly Includes hot and cold temperature indicator Includes optional 3 hole deck plate (escutcheon)
OPERATION • •
Pivot action lever style handle Temperature controlled by 180° arc of handle travel
FLOW •
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
KINGSLEY™ Single-Handle Lavatory Faucet
CARTRIDGE • •
1225 cartridge design Nonmetallic and stainless steel material
Models: 6102 series
STANDARDS • • •
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein Certified to NSF 61/9 & 372 Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
•
ADA
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA. *Use A1616 Extension Kit for Vessel Sink Applications
for lever handle
WARRANTY • •
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations
14-1/2" (369mm) OPEN POSITION
7-3/4" (197mm) 5.309" (135mm)
OPTIONAL ESCUTCHEON 6-1/4" X 2-1/2" (158mm) X (64mm)
8-1/2" (216mm) OPEN POSITION
Back Splash
ESCUTCHEON DIA. 2-5/16" (59mm) 3" (77mm) MAX.
**6-7/8" (175mm) Vessel Extension x2
2-1/2" min for lift rod operation
3-1/8" (80mm) MAX.
1/2" IPS ADAPTER
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
DESCRIPTION • • • • •
Metal construction with various finishes identified by suffix Flexible supplies with 3/8” compression fittings Includes metal pop-up waste assembly Includes hot and cold temperature indicator Includes optional 3 hole deck plate (escutcheon)
OPERATION • •
Lever style handle Temperature controlled by 100° arc of handle travel
FLOW •
Water usage is limited to these maximum flow rates as indicated by the corresponding product markings ° 1.2 gpm max (4.5L/min) at 60 psi
KINGSLEY™ Single-Handle Lavatory Faucet
CARTRIDGE •
1255™ Duralast™ cartridge
Models: 6102 series
STANDARDS • • • • •
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein Certified to NSF 61/9 & 372 Products marked with 1.2 gpm are compliant with California water efficiency regulations Complies with California Proposition 65 and with the Federal Safe Drinking Water Act ADA
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA. *Use A1616 Extension Kit for Vessel Sink Applications
for lever handle
WARRANTY • •
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations
14-1/2" (369mm) OPEN POSITION
7-3/4" (197mm) 5.309" (135mm)
OPTIONAL ESCUTCHEON 6-1/4" X 2-1/2" (158mm) X (64mm)
8-1/2" (216mm) OPEN POSITION
Back Splash
ESCUTCHEON DIA. 2-5/16" (59mm) 3" (77mm) MAX.
**6-7/8" (175mm) Vessel Extension x2
2-1/2" min for lift rod operation
3-1/8" (80mm) MAX.
26-3/8" (700mm)
20-3/8" (517mm)
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
S p e c i f i c a t i o n s DESCRIPTION • • • • •
Metal construction with various finishes identified by suffix Flexible supplies with 3/8” compression fittings Includes metal pop-up waste assembly Includes hot and cold temperature indicator Includes optional 3 hole deck plate (escutcheon)
OPERATION • •
Lever style handle Temperature controlled by 100° arc of handle travel
FLOW •
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
KINGSLEY™ Single-Handle Lavatory Faucet
CARTRIDGE •
1255™ Duralast™ cartridge
STANDARDS • •
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, NSF61/9& 372, and all applicable requirements referenced therein Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
•
ADA
Models: 6102 series NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA.
for lever handle
WARRANTY • •
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations
*Use A1616 Extension Kit for Vessel Sink Applications
14-1/2" (369mm) OPEN POSITION
7-3/4" (197mm) 5.309" (135mm)
OPTIONAL ESCUTCHEON 6-1/4" X 2-1/2" (158mm) X (64mm)
8-1/2" (216mm) OPEN POSITION
Back Splash
ESCUTCHEON DIA. 2-5/16" (59mm) 3" (77mm) MAX.
**6-7/8" (175mm) Vessel Extension x2
2-1/2" min for lift rod operation
3-1/8" (80mm) MAX.
26-3/8" (700mm)
20-3/8" (517mm)
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
S p e c i f i c a t i o n s DESCRIPTION • • • • •
Metal construction with various finishes identified by suffix 1/2" IPS connections Includes metal pop-up waste assembly Includes hot and cold temperature indicator Includes optional 3 hole deck plate (escutcheon)
OPERATION • •
Pivot action lever style handle Temperature controlled by 180° arc of handle travel
FLOW •
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
KINGSLEY™ Single-Handle Lavatory Faucet
CARTRIDGE • •
1225 cartridge design Nonmetallic and stainless steel material
Models: 6102 series
STANDARDS • • •
Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein Certified to NSF 61/9 & 372 Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
•
ADA
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA. *Use A1616 Extension Kit for Vessel Sink Applications
for lever handle
WARRANTY • •
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser 5 year warranty if used in commercial installations
14-1/2" (369mm) OPEN POSITION
7-3/4" (197mm) 5.309" (135mm)
OPTIONAL ESCUTCHEON 6-1/4" X 2-1/2" (158mm) X (64mm)
8-1/2" (216mm) OPEN POSITION
Back Splash
ESCUTCHEON DIA. 2-5/16" (59mm) 3" (77mm) MAX.
**6-7/8" (175mm) Vessel Extension x2
2-1/2" min for lift rod operation
3-1/8" (80mm) MAX.
1/2" IPS ADAPTER
CRITICAL DIMENSIONS (DO NOT SCALE)
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com
