ST4448N Flat Top
Item _____________________________________
ST4448N Flat Top
Front-Breathing Self-Contained Flat Top Refrigerated Bases Models •
ST4448N
Two section refrigerator, flat top with doors
•
STD4448N
Two section refrigerator, flat top with drawers
Standard Features
ST4448N
• All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up • Durable, rugged stainless steel sides, top and front • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty • Heavy duty self-closing hinges • “ST” prefix models have a 4” stainless steel backsplash • “D” prefix models feature Delfield’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly • Environmentally friendly R404A refrigerant • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low • Black recessed quick grip handle • Standard on 5” casters for easy cleaning and
Quantity _________________________________ CSI Section 11400 Approved ________________________________ Date _____________________________________
installation • 60-cycle single phase electrical system • 6’ cord and plug supplied • One epoxy coated wire shelf standard, installed per door section • Electromechanical control • Three year parts and labor warranty and an additional two year compressor parts warranty
Options & Accessories
• • • • • • • • • • *
18” wide single tier overshelf Stainless steel finish on back Plastic laminate on front Additional wire shelves 3” casters, 3.75” ride height Door lock (solid door models only) Exterior thermometer (solid door models only) Interior lights Glass door(s) 220V/50 Hertz electrical system* Inclusion of this option will alter electrical specifications of the unit
Specifications Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. The backsplash is full width and 4” (10cm) tall.
Electromechanical control is mounted on the right side of the evaporator housing inside the cabinet. It allows the unit to maintain consistent temperatures in heavy duty conditions.
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is onepiece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm).
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm) and three 1/9 size 4"-6" (10.2cm-15.2cm) deep pans. Bottom drawer holds one 12" x 20" and three 1/9 size 4" deep pans. Pans are supplied by others.
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
www.delfield.com
ST4448N Flat Top: Front-Breathing Self-Contained Flat Top Refrigerated Bases
Project ___________________________________
22.66" [57.56]
NOSE OF UNIT TO EDGE OF DOOR
] [50.65 19.94" IMENSION D 3] WIDTH [111.1 DOOR 43.75" N ENSIO IM D OR INTERI 5] " [50.6 SION 19.94 DIMEN ] WIDTH [111.13 DOOR 43.75" N MENSIO OR DI INTERI
48.13" [122.30]
31.50" [80.00] 29.55 [75.10] 48.13" [122.30]
31.50" [80.00] 29.55 [75.10]
4.00" [10.20] 4.00" [10.20]
20.75" [52.70]
26.86" [68.22] 23.79" [60.43]
36.00" [91.40] 33.59" [85.31]
20.75" [52.70] 26.86" [68.22] 21.94" [55.73]
ALT. SHELF21.94" [55.73]
23.79" [60.43]
36.00" [91.40]
ALT. SHELF
17.35" [44.08]
33.59" [85.31]
12.98" [33.00]
17.35" [44.08]
SHELF
12.98" [33.00]
SHELF
7.53" [19.10] 7.53" [19.10] 6.11" [15.52]
Front-Breathing Self-Contained Flat Top Refrigerated Bases
6.11" [15.52]
2.50" [6.30]2.50" [6.30]
ST4448N Right Side View
ST4448N Elevation View
22.66" [57.56]
19.60" [49.77]
NOSE OF UNIT TO EDGE OF DOOR
] [50.65 ON SI 19.94" DIMEN3] WIDTH [111.1 DOOR 43.75" ON MENSI DI OR INTERI
ST4448N ISO View
STD4448N ISO View
48.13" [122.30]
31.50" [80.00] 29.55 [75.10]
31.50" [80.01] 29.55" [75.1] 4.00" [10.20]
4.00" [10.20]
4.00" OR 6.00" DEEP PANS ON TOP 4.00" DEEP PANS ONLY ON BOTTOM 20.75" [52.70]
26.86" [68.22]
ST4448N Flat Top
36.00" [91.40]
NOSE OF UNIT TO EDGE OF DRAWER
21.94" [55.73]
23.79" [60.43]
36.00" [91.40]
ALT. SHELF
33.59" [85.31]
17.35" [44.08] 12.98" [33.00]
33.59" [85.31] SHELF
7.53" [19.10] 6.11" [15.52]
2.50" [6.30]
2.50" [6.30]
STD4448N Elevation View
STD4448N Right Side View
INSTALLATION NOTE: Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties.
Specifications Model ST4448N STD4448N
# of Shelves
Shelf Area
Volume
H.P.
V/Hz/Ph
Amps
Nema Plug
Ship Weight
Energy KWH/Day
2
5.48ft2
16.00ft3
1/5
115/60/1
3.9
5-15P
316lbs/143kg
2.61
NA
NA
16.00ft
1/5
115/60/1
3.9
5-15P
398lbs/181kg
NA
3
Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Printed in the U.S.A. 5480_ST4448N 10/14
ST4448N Flat Top
Front-Breathing Self-Contained Flat Top Refrigerated Bases Models •
ST4448N
Two section refrigerator, flat top with doors
•
STD4448N
Two section refrigerator, flat top with drawers
Standard Features
ST4448N
• All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up • Durable, rugged stainless steel sides, top and front • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty • Heavy duty self-closing hinges • “ST” prefix models have a 4” stainless steel backsplash • “D” prefix models feature Delfield’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly • Environmentally friendly R404A refrigerant • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low • Black recessed quick grip handle • Standard on 5” casters for easy cleaning and
Quantity _________________________________ CSI Section 11400 Approved ________________________________ Date _____________________________________
installation • 60-cycle single phase electrical system • 6’ cord and plug supplied • One epoxy coated wire shelf standard, installed per door section • Electromechanical control • Three year parts and labor warranty and an additional two year compressor parts warranty
Options & Accessories
• • • • • • • • • • *
18” wide single tier overshelf Stainless steel finish on back Plastic laminate on front Additional wire shelves 3” casters, 3.75” ride height Door lock (solid door models only) Exterior thermometer (solid door models only) Interior lights Glass door(s) 220V/50 Hertz electrical system* Inclusion of this option will alter electrical specifications of the unit
Specifications Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. The backsplash is full width and 4” (10cm) tall.
Electromechanical control is mounted on the right side of the evaporator housing inside the cabinet. It allows the unit to maintain consistent temperatures in heavy duty conditions.
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is onepiece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm).
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf. Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm) and three 1/9 size 4"-6" (10.2cm-15.2cm) deep pans. Bottom drawer holds one 12" x 20" and three 1/9 size 4" deep pans. Pans are supplied by others.
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619
www.delfield.com
ST4448N Flat Top: Front-Breathing Self-Contained Flat Top Refrigerated Bases
Project ___________________________________
22.66" [57.56]
NOSE OF UNIT TO EDGE OF DOOR
] [50.65 19.94" IMENSION D 3] WIDTH [111.1 DOOR 43.75" N ENSIO IM D OR INTERI 5] " [50.6 SION 19.94 DIMEN ] WIDTH [111.13 DOOR 43.75" N MENSIO OR DI INTERI
48.13" [122.30]
31.50" [80.00] 29.55 [75.10] 48.13" [122.30]
31.50" [80.00] 29.55 [75.10]
4.00" [10.20] 4.00" [10.20]
20.75" [52.70]
26.86" [68.22] 23.79" [60.43]
36.00" [91.40] 33.59" [85.31]
20.75" [52.70] 26.86" [68.22] 21.94" [55.73]
ALT. SHELF21.94" [55.73]
23.79" [60.43]
36.00" [91.40]
ALT. SHELF
17.35" [44.08]
33.59" [85.31]
12.98" [33.00]
17.35" [44.08]
SHELF
12.98" [33.00]
SHELF
7.53" [19.10] 7.53" [19.10] 6.11" [15.52]
Front-Breathing Self-Contained Flat Top Refrigerated Bases
6.11" [15.52]
2.50" [6.30]2.50" [6.30]
ST4448N Right Side View
ST4448N Elevation View
22.66" [57.56]
19.60" [49.77]
NOSE OF UNIT TO EDGE OF DOOR
] [50.65 ON SI 19.94" DIMEN3] WIDTH [111.1 DOOR 43.75" ON MENSI DI OR INTERI
ST4448N ISO View
STD4448N ISO View
48.13" [122.30]
31.50" [80.00] 29.55 [75.10]
31.50" [80.01] 29.55" [75.1] 4.00" [10.20]
4.00" [10.20]
4.00" OR 6.00" DEEP PANS ON TOP 4.00" DEEP PANS ONLY ON BOTTOM 20.75" [52.70]
26.86" [68.22]
ST4448N Flat Top
36.00" [91.40]
NOSE OF UNIT TO EDGE OF DRAWER
21.94" [55.73]
23.79" [60.43]
36.00" [91.40]
ALT. SHELF
33.59" [85.31]
17.35" [44.08] 12.98" [33.00]
33.59" [85.31] SHELF
7.53" [19.10] 6.11" [15.52]
2.50" [6.30]
2.50" [6.30]
STD4448N Elevation View
STD4448N Right Side View
INSTALLATION NOTE: Refrigeration system is designed so that air will flow under the unit, through the compressor area and out the front of the unit. Any restriction to this air flow path will void the warranties.
Specifications Model ST4448N STD4448N
# of Shelves
Shelf Area
Volume
H.P.
V/Hz/Ph
Amps
Nema Plug
Ship Weight
Energy KWH/Day
2
5.48ft2
16.00ft3
1/5
115/60/1
3.9
5-15P
316lbs/143kg
2.61
NA
NA
16.00ft
1/5
115/60/1
3.9
5-15P
398lbs/181kg
NA
3
Delfield reserves the right to make changes to the design or specifications without prior notice. 980 S. Isabella Rd. Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com
Printed in the U.S.A. 5480_ST4448N 10/14
