Submittal #18.4 260001 - Electrical
Submittal #18.4 260001 - Electrical Project: 201304 - Salem Probate & Family Court 36 Federal Street Salem, Massachusetts 01543
W.T. Rich Company 29 Crafts Street, Suite 300 Newton, Massachusetts 02458 Phone: (617) 467-6010 Fax: (617) 467-6011
Light Fixtures (G9/G9A & R3/R3E) SPEC SECTION:
260001 - Electrical
CREATED BY:
Andrew Farrell(W.T. Rich Company, Inc.)
STATUS:
Open
DATE CREATED:
10/19/2015
ISSUE DATE:
10/19/2015
REVISION:
4
RESPONSIBLE CONTRACTOR:
Wayne J. Griffin Electric, Inc.
RECEIVED FROM:
Patricia Lazdowsky
RECEIVED DATE: //
SUBMIT BY:
10/19/2015
FINAL DUE DATE: 11/02/2015
LOCATION:
TYPE:
Product Information
COST CODE:
APPROVERS:
PDR SPFC Project (Perry Dean Rogers / Partners Architects)
BALL IN COURT: PDR SPFC Project (Perry Dean Rogers / Partners Architects) DISTRIBUTION: Brett Navarro (Wayne J. Griffin Electric, Inc.), Paul Antoniewicz (Court Capital Projects), John deBettencourt (W.T. Rich Company, Inc.), John Bogdanski (DCAMM), Chris Conway (W.T. Rich Company, Inc.), Rob Day (W.T. Rich Company, Inc.), Mike Duffy (Wayne J. Griffin Electric, Inc.) , Andrew Farrell (W.T. Rich Company, Inc.), Jeremiah Kimball (Wayne J. Griffin Electric, Inc.), Steve Koutalakis (W.T. Rich Company, Inc.) , Patricia Lazdowsky (Wayne J. Griffin Electric, Inc.), Ken Nobrega (W.T. Rich Company, Inc.), Jeffrey Novak (Division of Capital Asset Management and), Louise Outler (Office of Court Management), PDR SPFC Project (Perry Dean Rogers / Partners Architects) , BVH Submittals (BVH Integrated Services ) DESCRIPTION: Included in this submittal: 1. Light Fixtures - Product Data (Fixtures G9/G9A & R3/R3E) Note: Please provide an expedited review of this submittal Note: This submittal includes two of three remaining light fixtures requiring approval, which were noted as revise and resubmit on the prior submittal return. The last one (LD4) will be submitted under separate cover. ATTACHMENTS: 260001 - #18 Rev 4 - Light Fixturess.pdf
SUBMITTAL WORKFLOW # 1
NAME PDR SPFC Project
SUBMITTER/ APPROVER
SENT DATE
DUE DATE
Approver
10/19/2015
11/2/2015
RETURNED RESPONSE DATE
ATTACHMENTS
COMMENTS
Pending
BY
W.T. Rich Company
DATE
COPIES TO
Page 1 of 1
Printed On: 10/19/2015 01:17 PM
W. T. Rich Company, Inc. SUBMITTAL COVER SHEET Architect:
Perry Dean Rogers | Partners 177 Milk Street Boston, MA 02109
Construction Manager:
W.T. Rich Co., Inc. 29 Crafts Street - Suite 300 Newton, MA 02458
FOR APPROVAL
Salem Probate and Family Court Reviewed by W.T. Rich Co. for general conformance with the design concept of the project and general compliance with the information provided within the Contract Documents. All field dimensions and conditions have been or will be verified prior to fabrication 10/19/2015
Submission By:
Griffin
Date:
October 19, 2015
Specification Section:
260001 - Electrical
Submittal No:
260001 – Light Fixtures (G9/G9A & R3/R3E)
X AG
10/30/15
BVH Comments: Fixture voltage shall be 277v.
SEE COMMENTS BY LAM ON NEXT PAGES.
29 Crafts Street, Suite 300 – Newton, Ma. 02458 TEL: 617-467-6010 – FAX: 617-467-6011 – WEBSITE: WWW.WTRICH.COM
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Engineer to verify all voltage requirements, ballast/driver/transformer/power supply/battery specifications, wiring configurations, emergency requirements, dimming requirements, and compatibility with lighting controls. Architect to verify compatibility of all fixtures with architectural materials and dimensions. Provide all components, drivers, connectors, mounting hardware, control interfaces, etc. required for complete operable installation.
Status
Submitted Lamp
Lamp Comments
n/a (general note)
all submittals
Reviewed 23-Jun-2015
GENERAL NOTE
A
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
AD
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
ADE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
AE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
C
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
CE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
G1
Reviewed 15-Sep-2015
NOT SUBMITTED
G3
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
G3A
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
G4
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
G4A
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
N/A
G5
Reviewed 23-Jun-2015
REVIEWED
N/A
G7
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
G8E
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
G9
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
G9A
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
G10
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
G11
Reviewed 15-Sep-2015
NOT SUBMITTED
L1D
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
N/A
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
not submitted
By Restoration Subcontractor – submit for review.
Submit for review.
NOT SUBMITTED n/a (LED)
Provide "NO – No Dimming" option. Provide BK (Black SandText) finish. N/A
n/a (LED)
Contractor to coordinate mounting detail with standard mounting component and miscellaneous metal as needed, as directed by Architect. N/A
n/a (LED)
Provide "NO – No Dimming" option. N/A
n/a (LED)
Contractor to coordinate mounting detail with standard mounting component and miscellaneous metal as needed, as directed by Architect.
n/a (LED)
n/a (LED)
Provide 2000-lumen module (1338-lumen delivered output). 24-degree beam angle is correct. N/A
n/a (LED)
Provide 2000-lumen module (1338-lumen delivered output). 24-degree beam angle is correct. N/A
Provide standard finish "BLK – Black". Provide WITHOUT modified shielding; 180-degree house-side-shielding is intended for fixture type G9A only.
n/a (LED) N/A n/a (LED)
Provide standard finish "BLK – Black". N/A
n/a (LED)
Provide "NO – No Dimming" option. N/A
n/a (LED)
Submit for review.
13061_Lam Fixture Submittal Review.xlsx
N/A
Contractor to confirm all run lengths (allowing 7"-13" clear at ends of straight runs, 7"-13" at inside corners, and 0"-6" clear at outside corners, with each overall run centered end-to-end within architectural detail). Engineer to confirm emergency fixture requirements (shop drawings do not differentiate between L1D and L1DE).
osram sylv 21070 #FP54/50W/830/HO/SS/ECO RESUBMIT
Provide 3500K 4-foot and 3-foot lamps: 21071 #FP54/50W/835/HO/SS/ECO 20198 #FP39/53W/835/HO/SS/ECO
Page 1 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Contractor to confirm all run lengths (allowing 7"-13" clear at ends of straight runs, 7"-13" at inside corners, and 0"-6" clear at outside corners, with each overall run centered end-to-end within architectural detail). Engineer to confirm emergency fixture requirements (shop drawings do not differentiate between L1D and L1DE). L3D-5: provide "EX" fixture run, in overall length not to exceed 5'-6" inches. Fixture must use two 3-foot lamps only. 2-foot lamps not acceptable. REVIEWED WITH COMMENTS For all other instances, using overall clear dimensions of architectural detail as provided by Contractor, provide longest possible fixture run (using REVISE SHOP DRAWINGS "nominal" length types, not "exact") that will allow at least 3" clear at either of architectural detail. Provide very narrow graze optics as specified. RESUBMIT Submittal notes that Manufacturer has confirmed availability of 3500K color temperature. 3500K was specified, and would be preferred. However, narrow graze optics are of critical importance. 3000K color temperature would be acceptable if necessary to select fixture with necessary optics. Use 12-foot and 8-foot sections as shown in architectural RCP drawings. All suspension points must occur as shown in architectural RCP drawings, REVIEWED WITH COMMENTS within raised coffer panels, not on beams. Power each row from a single feed stem at north end of row. REVISE SHOP DRAWINGS Provide dual-circuit switching and 10'-9" overall suspension height as previously submitted. Use 12-foot and 8-foot sections as shown in architectural RCP drawings. All suspension points must occur as shown in architectural RCP drawings, REVIEWED WITH COMMENTS within raised coffer panels, not on beams. Power each row from a single feed stem at north end of row. REVISE SHOP DRAWINGS Provide dual-circuit switching and SPR specular reflector as previously submitted. Provide WHR white reflector as previously submitted.
Status
L1DE
Reviewed 15-Sep-2015
L3D
Reviewed 15-Sep-2015
L4D
Reviewed 15-Sep-2015
L5
Reviewed 15-Sep-2015
L5A
Reviewed 15-Sep-2015
L6
Reviewed 15-Sep-2015
L6E
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L6A
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L6AD
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L6D
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L7D
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
N/A
L8
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L8A-8
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L8AE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L8A
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L9D
Reviewed 15-Sep-2015
REVIEWED
N/A
L10
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L11
Reviewed 23-Jun-2015
REVIEWED
L12
Reviewed 7-Jul-2015
REVIEWED WITH COMMENTS
P1
Reviewed 15-Sep-2015
NOT SUBMITTED
P3
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
P4
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
REVIEWED WITH COMMENTS
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
Submitted Lamp
Lamp Comments
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K 4-foot and 3-foot lamps: 21071 #FP54/50W/835/HO/SS/ECO 20198 #FP39/53W/835/HO/SS/ECO
osram sylv 22232 #FO32/25W/830/XP/SS/ECO3
Provide 3500K 3100-lumen/2200-lumen lamps: 21697 #FO32/835/XPS/ECO / 22154 #FO25/835/XPS/ECO
RESUBMIT
RESUBMIT n/a (LED) N/A osram sylv 21071 #FP54/50W/835/HO/SS/ECO REVIEWED osram sylv 21071 #FP54/50W/835/HO/SS/ECO REVIEWED osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
RESUBMIT
Provide WHR white reflector as previously submitted. RESUBMIT
Provide FST frosted diffuser as previously submitted. RESUBMIT
Provide FST frosted diffuser as previously submitted. RESUBMIT
Provide WHR white reflector as previously submitted. RESUBMIT
n/a (LED)
Provide continuous run lengths with illuminated corners, in dimensions to be verified by Architect.
osram sylv 20904 #FP54/835/HO/ECO
osram sylv 20901 #FP28/835/ECO
osram sylv 20901 #FP28/835/ECO
osram sylv 20901 #FP28/835/ECO
n/a (LED)
Using overall clear dimensions of architectural detail as provided by Contractor, provide longest possible fixture run (using "nominal" length types, not "exact") that will allow at least 3" clear at either of architectural detail.
osram sylv 22232 #FO32/25W/830/XP/SS/ECO3 RESUBMIT
Provide 3100-lumen/2200-lumen lamps: 21680 #FO32/830/XPS/ECO / 22153 #FO25/830/XPS/ECO
n/a (LED) N/A n/a (LED)
Provide all components necessary for complete operable installation. N/A
By Restoration Subcontractor – submit for review.
Provide 8-foot length of aircraft cable and power cord (not 8-foot overall fixture height). Final suspension height to be adjusted in the field.
Submit for review.
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 20192 #FP24/21W/830/HO/SS/ECO
Provide 3500K lamps: 20193 #FP24/21W/835/HO/SS/ECO
RESUBMIT
Provide aircraft cable and power cord lengths as noted in submittal review comments by Architect.
13061_Lam Fixture Submittal Review.xlsx
not submitted NOT SUBMITTED
RESUBMIT
Page 2 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Provide aircraft cable and power cord lengths as noted in submittal review comments by Architect. Suspension lengths exceed maximum battery distance – advise re: inverter or alternate approach.
Status
Submitted Lamp osram sylv 20192 #FP24/21W/830/HO/SS/ECO
P4E
Reviewed 7-Jul-2015
REVIEWED WITH COMMENTS
R1
Reviewed 23-Jun-2015
REVIEWED
N/A
R1D
Reviewed 23-Jun-2015
REVIEWED
N/A
R1DE
Reviewed 23-Jun-2015
REVIEWED
N/A
R1E
Reviewed 23-Jun-2015
REVIEWED
N/A
R2
Reviewed 15-Sep-2015
REVIEWED
N/A
R2D
Reviewed 15-Sep-2015
REVIEWED
N/A
R3
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
Engineer to verify type of driver and dimming requirements. Provide reflector finish "MW – Matte White" and trim option "OGPY – Opal Glass Flared Cone".
N/A
R3E
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
Engineer to verify type of driver and dimming requirements. Provide reflector finish "MW – Matte White" and trim option "OGPY – Opal Glass Flared Cone".
N/A
R5
Reviewed 23-Jun-2015
REVIEWED
N/A
R5E
Reviewed 23-Jun-2015
REVIEWED
N/A
R7
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
R7E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
R8
Reviewed 23-Jun-2015
DELETED
DELETED
R8E
Reviewed 23-Jun-2015
DELETED
DELETED
RB2
Reviewed 9-Jul-2015
REVIEW BY OTHERS
RESUBMIT
RB3
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
RC18
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
RC18E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
S2
Reviewed 23-Jun-2015
REVIEWED
N/A
S3D
Reviewed 15-Sep-2015
NOT SUBMITTED
NOT SUBMITTED
S4
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
RESUBMIT
Lamp Comments Provide 3500K lamps: 20193 #FP24/21W/835/HO/SS/ECO
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO osram sylv 22139 #FO25/835/ECO
Provide 3100-lumen/2200-lumen lamps: 21697 #FO32/835/XPS/ECO / 22154 #FO25/835/XPS/ECO Engineer to verify lamp type and color temperature.
n/a (LED)
osram sylv 22135 #FO17/835/ECO
Provide 1400-lumen lamps: 22151 #FO17/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 22135 #FO17/835/ECO
Provide 1400-lumen lamps: 22151 #FO17/835/XPS/ECO Engineer to verify lamp type and color temperature.
n/a (LED)
not submitted
By Restoration Subcontractor – submit for review.
Submit for review.
n/a (LED)
13061_Lam Fixture Submittal Review.xlsx
Page 3 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Status
Submitted Lamp
Lamp Comments
n/a (LED)
S4E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
W1
Reviewed 23-Jun-2015
REVIEWED
RESUBMIT
W2
Reviewed 23-Jun-2015
REVIEWED
REVIEWED
W2E
Reviewed 23-Jun-2015
REVIEWED
REVIEWED
W3
Reviewed 23-Jun-2015
REVIEWED
N/A
W3D
Reviewed 23-Jun-2015
REVIEWED
N/A
W4D
Reviewed 15-Sep-2015
NOT SUBMITTED
W5D
Reviewed 7-Jul-2015
REVIEWED WITH COMMENTS PROVIDE SHOP DRAWINGS
WC
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
WC1
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
WC1E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
WCE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
X1
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
X2
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
X3
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
ELEV2
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
ELEV3
Reviewed 23-Jun-2015
REVIEW BY OTHERS
NOT SUBMITTED
LC&D
Reviewed 23-Jun-2015
NOT SUBMITTED
osram sylv 21304 #FP14/13W/835/SS/ECO
osram sylv 20580 #FT24DL/835/ECO
osram sylv 20580 #FT24DL/835/ECO
n/a (LED)
n/a (LED)
not submitted
By Restoration Subcontractor – submit for review.
Submit for review.
NOT SUBMITTED n/a (LED)
Provide shop drawings for review showing continuous run lengths and complete configurations with illuminated corner components. N/A
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
n/a (LED)
n/a (LED)
n/a (LED)
n/a (included)
osram sylv 11374 #75A19 130V
Engineer to verify lamp type and voltage.
n/a (controls)
Submit for review by others. N/A
Definitions: REVIEWED: The product conforms to the design intent and may be provided as submitted. REVIEWED WITH COMMENTS: The product may be provided on the condition that it complies with these comments. RESUBMIT: The product as submitted does not comply with the contract documents. Resubmit in accordance with contract documents and these comments. SUBMIT ADDITIONAL: ... NOT SUBMITTED: The product must be submitted for review. REVIEW BY OTHERS: The product is outside Lam Partners Inc's scope and shall be reviewed by others. DELETED: The submitted product is no longer specified for use in the project. HOLD: Product not reviewed – see comments.
13061_Lam Fixture Submittal Review.xlsx
Page 4 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015 Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Status
Fixture Comments
Status
Reviewed by: KL/AB
Submitted Lamp
Lamp Comments
Our review comments are in addition to comments provided by the Architect, Electrical Engineer, and others designated by the Architect to review these submittals. This review does not extend to engineering, code compliance, or coordination with environmental conditions, electrical supply, or building systems. Our review does not constitute an approval to bid, order, purchase, fabricate, or install, which require review and approval by the Electrical Engineer, Architect, and General Contractor or Construction Manager. Our review does not relieve any supplier or contractor of any requirement to conform to the Contract Documents. Any fixture types not listed above were not reviewed by Lam Partners.
13061_Lam Fixture Submittal Review.xlsx
Page 5 of 5
LETTER OF TRANSMITTAL
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road DATE
HOLLISTON, MASSACHUSETTS, 01746
ATTENTION
PHONE (508) 429-8830
2056
Rob Day, Andrew Farrell
RE:
FAX (508) 429-7825
JOB NO:
10/2/2015
Salem Probate/Family Court Renovations
cc: Ken Nobrega, Steve Koutalakis TO
W.T. Rich Company
[email protected]
29 Crafts Street, Suite 300
[email protected]
Newton, MA 02458
[email protected]
(617) 487-6010
[email protected]
WE ARE SENDING YOU
COPIES
Attached
Under Separate Cover Via
Shop Drawings
Prints
Copy of Letter
Change Order
DATE
Plans x
Samples
Specifications
Submittals
NO.
10/2/2015
the following items:
DESCRIPTION
Section 260001 - 2.18 - Light Fixtures - Rev. 8
THESE ARE TRANSMITTED as checked below: x
x
For approval
Approved as submitted
Resubmit
copies for approval
For your use
Approved as noted
Submit
copies for distribution
As requested
Returned for corrections
Return
corrected prints
For review and comment FOR BIDS DUE
PRINTS RETURNED AFTER LOAN TO US
REMARKS
COPY TO
Mike Duffy,Joe Hudock,Jim Boudreau,Jeremiah Kimball,File
Trish Lazdowsky
SIGNED:
Expeditor/Submittals Administrator
Licenses: MA A8999 AL 16318
VT EM3303 RI AC003520
NH 4223M GA EN213065
ME MC60017598 NC 16529U
CT ELC.0123697-E1
SC- M3477
If enclosures are not as noted, kindly notify us at once.
October 2, 2015
PROJECT:
Salem Probate/ Family Court Renovations 36 Federal Street Salem, MA 01970
OWNER:
DCAMM One Ashburton Place Boston, MA 02108
GENERAL CONTRACTOR:
W.T. Rich Company 29 Crafts Street, Suite 300 Newton, MA 02458
ARCHITECT:
Perry Dean Rogers Partners 177 Milk Street Boston, MA 02109
ELECTRICAL ENGINEER:
BVH Integrated Services 1 Gateway Circle, Suite 506 Newton, MA 02458
ELECTRICAL CONTRACTOR:
Wayne J. Griffin Electric, Inc. 116 Hopping Brook Road Holliston, MA 01746
We herein submit the following electrical equipment for the Salem Probate/Family Court Renovations project for your approval: Section 260001 – 2.18 – Light Fixtures – Rev. 8
PROJECT:
Salem Probate/Family Court Renovations Salem, MA
SUBMITTAL:
Section 260001 – 2.18 – Light Fixtures – Rev. 8
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road Holliston, MA 01746
Reviewed by:
Mike Duffy
Date: October 2, 2015
pal
BOSTON LIGHT SOURCE 64 COMMERCIAL WHARF BOSTON, MA 02110 Phone: 617-788-2400 Fax: 617-367-0925 Contact: Emilie Pastore
Salem Probate Court 14-17899-8 8/7/2015
Project 14-17899-8 Salem Probate Court Submitted By
BOSTON LIGHT SOURCE
Type
Manufacturer
Catalog Number
R3
Spectrum
R3E
Spectrum
SGE5LEDOS 9L 35K DO102 AR5223OS (f) SGE5LEDOS 9L 35K DO102 EM2 AR5223OS (f)
Project 14-17899-8 Salem Probate Court
Catalog Number
Submitted By
Notes
BOSTON LIGHT SOURCE
Please confirm part number required
MACHINED ALUMINUM HEAT SINK
ZHAGA COMPLIANT LED MODULE
Type
SGE5LEDOS 9L 35K DO102 AR5223OS (f)
R3
DECO-TRIM LED DOWNLIGHT
recessed fixtures
OS SERIES / 35 WATT MAX
TWO STAGE OPTICAL SYSTEM WITH DIFFUSER LENS
SGE5LEDOS APPLICATION #20 GA GALVANIZED STEEL HOUSING
MULTI-BAR MOUNTING BRACKET
Round OS Series LED downlight with Decorative flared glass or acrylic accent adds visual detail and ceiling brightness. FEATURES Delivers a range of 547-2385 lumens. Two-stage optical system for smooth light distribution. Zhaga LED module for ease of maintenance and replacement. Shallow plenum design (under 4.5" depth). Tool-less LED module, driver, and J-Box access. Multi-Bar mounting brackets. BH27 Standard mounting bars included. Posi-lock trim retention torsion springs. Integral 0.625" collar, with plaster option (PR) for up to 3" thick ceiling. FINISH Variety of powdercoat and anodized finishes available. ELECTRONICS LED module features high brightness white Nichia LEDs. 3-step MacAdam Ellipses binning and CRI 84 minimum. Variety of electronic 120v/277v and dimming drivers. CONSTRUCTION Extruded and machined 6063-H32 aluminum heatsink. Carbon gasket for optimal thermal management. Housing/frame constructed of #20 ga. galvanized steel
A
D
to resist corrosion. Self flanged one piece trim spun from 0.063" thick high purity aluminum and finished to specification. Deco-Trim accent is available in molded opal glass or frosted acrylic. CODE COMPLIANCE
S1 S2
B
C
ARRA Compliant. Non-IC rated. ETL/UL/CSA listed for damp locations. LM79/ LM80/TM21 data available. Optional Wet location. Manufactured and built to UL
A
B
C
D
S1
S2
4.38 111.252 mm
0.625 15.875 mm
13.3 337.82 mm
7.9 201.213 mm
5.0 127.0 mm
6.3 160.02 mm
SERIES
LUMENS1
SGE5LEDOS
9L 14L 976 Lumens 25L 1593 Lumens 35L 2385 Lumens 547 Lumens
CCT 27K 30K 35K 40K
2700º K 3000º K 3500º K 4000° K
standards No. 1598/8750.
DRIVER2
OPTIONS3
TRIM / FINISH
TRIM OPTIONS
E1 Electronic, 120v E2 Electronic, 277v DS2W1 2 Wire Phase Dimming, 120v 9w Only DO101 0-10v Dimming, 120v to 1% DO102 0-10v Dimming, 277v to 1% DS101 0-10v Dimming, 120v to 10% DS102 0-10v Dimming, 277v to 10% DLTE1 Lutron 2 Wire Phase Dimming, 120v Only DL331 Lutron Hi Lume Dimming, 120v DL332 Lutron Hi Lume Dimming, 277v DL3E1 Lutron ECO System Dimming, 120v DL3E2 Lutron ECO System Dimming, 277v
BH27 27" Mounting Bars BH6 6"-12" Expandable Mounting Bars BH12 12"- 24" Expandable Mounting Bars CB24 C-Channel Bars FS Fusing EM1 Emergency Battery Pack 120v EM2 Emergency Battery Pack 277v CR Corrosion Resistant PR Plaster Ring TBC T-bar Clips (for BH27) GR Goof Ring EB Eco Black Powdercoat
AR5223OS MW Matte White SG Semi-Diffuse Low Iridescent CL Specular Alzak HZ Matte Low Iridescent MB Matte Black PT Platinum PF Polished Flange WE Wheat Alzak CC Custom Color
FAPY Frosted Acrylic Flared Cone FGPY Frosted Glass Flared Cone OGPY Opal Glass Flared Cone OAPY Opal Acrylic Flared Cone
4
Advise finish
EXAMPLE: SGE5LEDOS25L35KE1/AR5223OS FAPY
5
NOTES: 1 Delivered Lumens at 3500°K 2 Contact Factory for Additional Dimming or Control Options 3 See Product Options Page For Ordering, Detail and Specifications 4 BH27 Mounting Bars Standard
Dimensions and values shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
PROJECT:
YEAR WARRANTY
TYPE:
CAT. NO.: WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 1501
Project 14-17899-8 Salem Probate Court
Catalog Number
Submitted By
Notes
BOSTON LIGHT SOURCE
Please confirm part number required
MACHINED ALUMINUM HEAT SINK
ZHAGA COMPLIANT LED MODULE
Type
SGE5LEDOS 9L 35K DO102 EM2 AR5223OS (f)
R3E
DECO-TRIM LED DOWNLIGHT
recessed fixtures
OS SERIES / 35 WATT MAX
TWO STAGE OPTICAL SYSTEM WITH DIFFUSER LENS
SGE5LEDOS APPLICATION #20 GA GALVANIZED STEEL HOUSING
MULTI-BAR MOUNTING BRACKET
Round OS Series LED downlight with Decorative flared glass or acrylic accent adds visual detail and ceiling brightness. FEATURES Delivers a range of 547-2385 lumens. Two-stage optical system for smooth light distribution. Zhaga LED module for ease of maintenance and replacement. Shallow plenum design (under 4.5" depth). Tool-less LED module, driver, and J-Box access. Multi-Bar mounting brackets. BH27 Standard mounting bars included. Posi-lock trim retention torsion springs. Integral 0.625" collar, with plaster option (PR) for up to 3" thick ceiling. FINISH Variety of powdercoat and anodized finishes available. ELECTRONICS LED module features high brightness white Nichia LEDs. 3-step MacAdam Ellipses binning and CRI 84 minimum. Variety of electronic 120v/277v and dimming drivers. CONSTRUCTION Extruded and machined 6063-H32 aluminum heatsink. Carbon gasket for optimal thermal management. Housing/frame constructed of #20 ga. galvanized steel
A
D
to resist corrosion. Self flanged one piece trim spun from 0.063" thick high purity aluminum and finished to specification. Deco-Trim accent is available in molded opal glass or frosted acrylic. CODE COMPLIANCE
S1 S2
B
C
ARRA Compliant. Non-IC rated. ETL/UL/CSA listed for damp locations. LM79/ LM80/TM21 data available. Optional Wet location. Manufactured and built to UL
A
B
C
D
S1
S2
4.38 111.252 mm
0.625 15.875 mm
13.3 337.82 mm
7.9 201.213 mm
5.0 127.0 mm
6.3 160.02 mm
SERIES
LUMENS1
SGE5LEDOS
9L 14L 976 Lumens 25L 1593 Lumens 35L 2385 Lumens 547 Lumens
CCT 27K 30K 35K 40K
2700º K 3000º K 3500º K 4000° K
standards No. 1598/8750.
DRIVER2
OPTIONS3
TRIM / FINISH
TRIM OPTIONS
E1 Electronic, 120v E2 Electronic, 277v DS2W1 2 Wire Phase Dimming, 120v 9w Only DO101 0-10v Dimming, 120v to 1% DO102 0-10v Dimming, 277v to 1% DS101 0-10v Dimming, 120v to 10% DS102 0-10v Dimming, 277v to 10% DLTE1 Lutron 2 Wire Phase Dimming, 120v Only DL331 Lutron Hi Lume Dimming, 120v DL332 Lutron Hi Lume Dimming, 277v DL3E1 Lutron ECO System Dimming, 120v DL3E2 Lutron ECO System Dimming, 277v
BH27 27" Mounting Bars BH6 6"-12" Expandable Mounting Bars BH12 12"- 24" Expandable Mounting Bars CB24 C-Channel Bars FS Fusing EM1 Emergency Battery Pack 120v EM2 Emergency Battery Pack 277v CR Corrosion Resistant PR Plaster Ring TBC T-bar Clips (for BH27) GR Goof Ring EB Eco Black Powdercoat
AR5223OS MW Matte White SG Semi-Diffuse Low Iridescent CL Specular Alzak HZ Matte Low Iridescent MB Matte Black PT Platinum PF Polished Flange WE Wheat Alzak CC Custom Color
FAPY Frosted Acrylic Flared Cone FGPY Frosted Glass Flared Cone OGPY Opal Glass Flared Cone OAPY Opal Acrylic Flared Cone
4
Advise finish
EXAMPLE: SGE5LEDOS25L35KE1/AR5223OS FAPY
5
NOTES: 1 Delivered Lumens at 3500°K 2 Contact Factory for Additional Dimming or Control Options 3 See Product Options Page For Ordering, Detail and Specifications 4 BH27 Mounting Bars Standard
Dimensions and values shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
PROJECT:
YEAR WARRANTY
TYPE:
CAT. NO.: WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 1501
LETTER OF TRANSMITTAL
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road DATE
HOLLISTON, MASSACHUSETTS, 01746
ATTENTION
PHONE (508) 429-8830
2056
Rob Day, Andrew Farrell
RE:
FAX (508) 429-7825
JOB NO:
10/6/2015
Salem Probate/Family Court Renovations
cc: Ken Nobrega, Steve Koutalakis TO
W.T. Rich Company
[email protected]
29 Crafts Street, Suite 300
[email protected]
Newton, MA 02458
[email protected]
(617) 487-6010
[email protected]
WE ARE SENDING YOU
COPIES
Attached
Under Separate Cover Via
Shop Drawings
Prints
Copy of Letter
Change Order
DATE
Plans x
Samples
Specifications
Submittals
NO.
10/6/2015
the following items:
DESCRIPTION
Section 260001 - 2.18 - Light Fixtures - Rev. 9 - Type G/G9A Fixture - Please Note: This fixture needs to be modified to meet the submittal comments and there will be an extra cost.
THESE ARE TRANSMITTED as checked below: x
x
For approval
Approved as submitted
Resubmit
copies for approval
For your use
Approved as noted
Submit
copies for distribution
As requested
Returned for corrections
Return
corrected prints
For review and comment FOR BIDS DUE
PRINTS RETURNED AFTER LOAN TO US
REMARKS
COPY TO
Mike Duffy,Joe Hudock,Jim Boudreau,Jeremiah Kimball,File
Trish Lazdowsky
SIGNED:
Expeditor/Submittals Administrator
Licenses: MA A8999 AL 16318
VT EM3303 RI AC003520
NH 4223M GA EN213065
ME MC60017598 NC 16529U
CT ELC.0123697-E1
SC- M3477
If enclosures are not as noted, kindly notify us at once.
October 6, 2015
PROJECT:
Salem Probate/ Family Court Renovations 36 Federal Street Salem, MA 01970
OWNER:
DCAMM One Ashburton Place Boston, MA 02108
GENERAL CONTRACTOR:
W.T. Rich Company 29 Crafts Street, Suite 300 Newton, MA 02458
ARCHITECT:
Perry Dean Rogers Partners 177 Milk Street Boston, MA 02109
ELECTRICAL ENGINEER:
BVH Integrated Services 1 Gateway Circle, Suite 506 Newton, MA 02458
ELECTRICAL CONTRACTOR:
Wayne J. Griffin Electric, Inc. 116 Hopping Brook Road Holliston, MA 01746
We herein submit the following electrical equipment for the Salem Probate/Family Court Renovations project for your approval: Section 260001 – 2.18 – Light Fixtures – Rev. 9 – Type G9/G9A
PROJECT:
Salem Probate/Family Court Renovations Salem, MA
SUBMITTAL:
Section 260001 – 2.18 – Light Fixtures – Rev. 9 – Type G/G9A Fixture
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road Holliston, MA 01746
Reviewed by:
Mike Duffy
Date: October 6, 2015
pal
Oct 2, 2015
RE:
Qty
Salem Probate Court - Bega
Type
0
G9 / G9A
MFG
Part
Bega
8554LED-FINISH / MOD 180 DEGREE HSS
Item Note:
FF00010
Please advise finish
Omni-Lite 263 Winn St. Burlington, MA 01803
781-272-2300
Page 1/1
Submitted by Omni-Lite
Job Name: Salem Probate Court - Bega Architect: Perry Dean Rogers Partners (Boston) Contractor: Wayne J. Griffin Electric (Holliston)
Catalog Number: 8554LED-FINISH / MOD 180 DEGREE HSS Notes: Please advise finish
Type:
G9 / G9A OMNI15-39044
LED Bollards with rotationally symmetrical distribution
Post construction: One piece extruded aluminum, with a one piece aluminum top housing and base, internally welded into an assembly. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy. Enclosure: Heavy walled, die-cast aluminum cap. Clear 3⁄16" thick borosilicate glass with pure anodized aluminum cone reflector. Fully gasketed using high temperature silicone rubber O-ring gaskets. Electrical: 18.2 W LED luminaire, 24.5 total system watts, -20° C start temperature. Integral 120 V through 277 V electronic LED driver, dimming not available. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with a >80 CRI. Available in 4000K (>80 CRI); add suffix K4 to order. Note: Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com.
Type: BEGA Product: Project: Voltage: Color: Options: Modified:
Anchor base: Heavy cast aluminum, slotted for precise alignment. Mounts to BEGA #895 A anchorage kit (supplied). Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order.
ADVISE COLOR
UL listed for US and Canadian Standards, suitable for wet locations. Protection class IP65. Luminaire Lumens: 881 Tested in accordance with LM-79-08
A
A
B
A B B
Lamp
8554 LED
18.2 W LED
A
B
Anchorage
6 1⁄2 39 3⁄8
895 A
1000 BEGA Way, Carpinteria, CA 93013 ( 805 ) 684-0533 FAX ( 805 ) 566-9474 www. bega-us . com ©copyright BEGA-US 2014
Updated 05/14
MODIFIED TO HAVE 180 DEGREE HOUSE SIDE SHIELD
W.T. Rich Company 29 Crafts Street, Suite 300 Newton, Massachusetts 02458 Phone: (617) 467-6010 Fax: (617) 467-6011
Light Fixtures (G9/G9A & R3/R3E) SPEC SECTION:
260001 - Electrical
CREATED BY:
Andrew Farrell(W.T. Rich Company, Inc.)
STATUS:
Open
DATE CREATED:
10/19/2015
ISSUE DATE:
10/19/2015
REVISION:
4
RESPONSIBLE CONTRACTOR:
Wayne J. Griffin Electric, Inc.
RECEIVED FROM:
Patricia Lazdowsky
RECEIVED DATE: //
SUBMIT BY:
10/19/2015
FINAL DUE DATE: 11/02/2015
LOCATION:
TYPE:
Product Information
COST CODE:
APPROVERS:
PDR SPFC Project (Perry Dean Rogers / Partners Architects)
BALL IN COURT: PDR SPFC Project (Perry Dean Rogers / Partners Architects) DISTRIBUTION: Brett Navarro (Wayne J. Griffin Electric, Inc.), Paul Antoniewicz (Court Capital Projects), John deBettencourt (W.T. Rich Company, Inc.), John Bogdanski (DCAMM), Chris Conway (W.T. Rich Company, Inc.), Rob Day (W.T. Rich Company, Inc.), Mike Duffy (Wayne J. Griffin Electric, Inc.) , Andrew Farrell (W.T. Rich Company, Inc.), Jeremiah Kimball (Wayne J. Griffin Electric, Inc.), Steve Koutalakis (W.T. Rich Company, Inc.) , Patricia Lazdowsky (Wayne J. Griffin Electric, Inc.), Ken Nobrega (W.T. Rich Company, Inc.), Jeffrey Novak (Division of Capital Asset Management and), Louise Outler (Office of Court Management), PDR SPFC Project (Perry Dean Rogers / Partners Architects) , BVH Submittals (BVH Integrated Services ) DESCRIPTION: Included in this submittal: 1. Light Fixtures - Product Data (Fixtures G9/G9A & R3/R3E) Note: Please provide an expedited review of this submittal Note: This submittal includes two of three remaining light fixtures requiring approval, which were noted as revise and resubmit on the prior submittal return. The last one (LD4) will be submitted under separate cover. ATTACHMENTS: 260001 - #18 Rev 4 - Light Fixturess.pdf
SUBMITTAL WORKFLOW # 1
NAME PDR SPFC Project
SUBMITTER/ APPROVER
SENT DATE
DUE DATE
Approver
10/19/2015
11/2/2015
RETURNED RESPONSE DATE
ATTACHMENTS
COMMENTS
Pending
BY
W.T. Rich Company
DATE
COPIES TO
Page 1 of 1
Printed On: 10/19/2015 01:17 PM
W. T. Rich Company, Inc. SUBMITTAL COVER SHEET Architect:
Perry Dean Rogers | Partners 177 Milk Street Boston, MA 02109
Construction Manager:
W.T. Rich Co., Inc. 29 Crafts Street - Suite 300 Newton, MA 02458
FOR APPROVAL
Salem Probate and Family Court Reviewed by W.T. Rich Co. for general conformance with the design concept of the project and general compliance with the information provided within the Contract Documents. All field dimensions and conditions have been or will be verified prior to fabrication 10/19/2015
Submission By:
Griffin
Date:
October 19, 2015
Specification Section:
260001 - Electrical
Submittal No:
260001 – Light Fixtures (G9/G9A & R3/R3E)
X AG
10/30/15
BVH Comments: Fixture voltage shall be 277v.
SEE COMMENTS BY LAM ON NEXT PAGES.
29 Crafts Street, Suite 300 – Newton, Ma. 02458 TEL: 617-467-6010 – FAX: 617-467-6011 – WEBSITE: WWW.WTRICH.COM
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Engineer to verify all voltage requirements, ballast/driver/transformer/power supply/battery specifications, wiring configurations, emergency requirements, dimming requirements, and compatibility with lighting controls. Architect to verify compatibility of all fixtures with architectural materials and dimensions. Provide all components, drivers, connectors, mounting hardware, control interfaces, etc. required for complete operable installation.
Status
Submitted Lamp
Lamp Comments
n/a (general note)
all submittals
Reviewed 23-Jun-2015
GENERAL NOTE
A
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
AD
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
ADE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
AE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
C
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
CE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
G1
Reviewed 15-Sep-2015
NOT SUBMITTED
G3
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
G3A
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
G4
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
G4A
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
N/A
G5
Reviewed 23-Jun-2015
REVIEWED
N/A
G7
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
G8E
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
G9
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
G9A
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
G10
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
G11
Reviewed 15-Sep-2015
NOT SUBMITTED
L1D
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
N/A
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
not submitted
By Restoration Subcontractor – submit for review.
Submit for review.
NOT SUBMITTED n/a (LED)
Provide "NO – No Dimming" option. Provide BK (Black SandText) finish. N/A
n/a (LED)
Contractor to coordinate mounting detail with standard mounting component and miscellaneous metal as needed, as directed by Architect. N/A
n/a (LED)
Provide "NO – No Dimming" option. N/A
n/a (LED)
Contractor to coordinate mounting detail with standard mounting component and miscellaneous metal as needed, as directed by Architect.
n/a (LED)
n/a (LED)
Provide 2000-lumen module (1338-lumen delivered output). 24-degree beam angle is correct. N/A
n/a (LED)
Provide 2000-lumen module (1338-lumen delivered output). 24-degree beam angle is correct. N/A
Provide standard finish "BLK – Black". Provide WITHOUT modified shielding; 180-degree house-side-shielding is intended for fixture type G9A only.
n/a (LED) N/A n/a (LED)
Provide standard finish "BLK – Black". N/A
n/a (LED)
Provide "NO – No Dimming" option. N/A
n/a (LED)
Submit for review.
13061_Lam Fixture Submittal Review.xlsx
N/A
Contractor to confirm all run lengths (allowing 7"-13" clear at ends of straight runs, 7"-13" at inside corners, and 0"-6" clear at outside corners, with each overall run centered end-to-end within architectural detail). Engineer to confirm emergency fixture requirements (shop drawings do not differentiate between L1D and L1DE).
osram sylv 21070 #FP54/50W/830/HO/SS/ECO RESUBMIT
Provide 3500K 4-foot and 3-foot lamps: 21071 #FP54/50W/835/HO/SS/ECO 20198 #FP39/53W/835/HO/SS/ECO
Page 1 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Contractor to confirm all run lengths (allowing 7"-13" clear at ends of straight runs, 7"-13" at inside corners, and 0"-6" clear at outside corners, with each overall run centered end-to-end within architectural detail). Engineer to confirm emergency fixture requirements (shop drawings do not differentiate between L1D and L1DE). L3D-5: provide "EX" fixture run, in overall length not to exceed 5'-6" inches. Fixture must use two 3-foot lamps only. 2-foot lamps not acceptable. REVIEWED WITH COMMENTS For all other instances, using overall clear dimensions of architectural detail as provided by Contractor, provide longest possible fixture run (using REVISE SHOP DRAWINGS "nominal" length types, not "exact") that will allow at least 3" clear at either of architectural detail. Provide very narrow graze optics as specified. RESUBMIT Submittal notes that Manufacturer has confirmed availability of 3500K color temperature. 3500K was specified, and would be preferred. However, narrow graze optics are of critical importance. 3000K color temperature would be acceptable if necessary to select fixture with necessary optics. Use 12-foot and 8-foot sections as shown in architectural RCP drawings. All suspension points must occur as shown in architectural RCP drawings, REVIEWED WITH COMMENTS within raised coffer panels, not on beams. Power each row from a single feed stem at north end of row. REVISE SHOP DRAWINGS Provide dual-circuit switching and 10'-9" overall suspension height as previously submitted. Use 12-foot and 8-foot sections as shown in architectural RCP drawings. All suspension points must occur as shown in architectural RCP drawings, REVIEWED WITH COMMENTS within raised coffer panels, not on beams. Power each row from a single feed stem at north end of row. REVISE SHOP DRAWINGS Provide dual-circuit switching and SPR specular reflector as previously submitted. Provide WHR white reflector as previously submitted.
Status
L1DE
Reviewed 15-Sep-2015
L3D
Reviewed 15-Sep-2015
L4D
Reviewed 15-Sep-2015
L5
Reviewed 15-Sep-2015
L5A
Reviewed 15-Sep-2015
L6
Reviewed 15-Sep-2015
L6E
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L6A
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L6AD
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L6D
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L7D
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS
N/A
L8
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L8A-8
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L8AE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L8A
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
L9D
Reviewed 15-Sep-2015
REVIEWED
N/A
L10
Reviewed 15-Sep-2015
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
L11
Reviewed 23-Jun-2015
REVIEWED
L12
Reviewed 7-Jul-2015
REVIEWED WITH COMMENTS
P1
Reviewed 15-Sep-2015
NOT SUBMITTED
P3
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
P4
Reviewed 23-Jun-2015
REVIEWED WITH COMMENTS
REVIEWED WITH COMMENTS
REVIEWED WITH COMMENTS REVISE SHOP DRAWINGS
Submitted Lamp
Lamp Comments
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K 4-foot and 3-foot lamps: 21071 #FP54/50W/835/HO/SS/ECO 20198 #FP39/53W/835/HO/SS/ECO
osram sylv 22232 #FO32/25W/830/XP/SS/ECO3
Provide 3500K 3100-lumen/2200-lumen lamps: 21697 #FO32/835/XPS/ECO / 22154 #FO25/835/XPS/ECO
RESUBMIT
RESUBMIT n/a (LED) N/A osram sylv 21071 #FP54/50W/835/HO/SS/ECO REVIEWED osram sylv 21071 #FP54/50W/835/HO/SS/ECO REVIEWED osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
RESUBMIT
Provide WHR white reflector as previously submitted. RESUBMIT
Provide FST frosted diffuser as previously submitted. RESUBMIT
Provide FST frosted diffuser as previously submitted. RESUBMIT
Provide WHR white reflector as previously submitted. RESUBMIT
n/a (LED)
Provide continuous run lengths with illuminated corners, in dimensions to be verified by Architect.
osram sylv 20904 #FP54/835/HO/ECO
osram sylv 20901 #FP28/835/ECO
osram sylv 20901 #FP28/835/ECO
osram sylv 20901 #FP28/835/ECO
n/a (LED)
Using overall clear dimensions of architectural detail as provided by Contractor, provide longest possible fixture run (using "nominal" length types, not "exact") that will allow at least 3" clear at either of architectural detail.
osram sylv 22232 #FO32/25W/830/XP/SS/ECO3 RESUBMIT
Provide 3100-lumen/2200-lumen lamps: 21680 #FO32/830/XPS/ECO / 22153 #FO25/830/XPS/ECO
n/a (LED) N/A n/a (LED)
Provide all components necessary for complete operable installation. N/A
By Restoration Subcontractor – submit for review.
Provide 8-foot length of aircraft cable and power cord (not 8-foot overall fixture height). Final suspension height to be adjusted in the field.
Submit for review.
osram sylv 21070 #FP54/50W/830/HO/SS/ECO
Provide 3500K lamps: 21071 #FP54/50W/835/HO/SS/ECO
osram sylv 20192 #FP24/21W/830/HO/SS/ECO
Provide 3500K lamps: 20193 #FP24/21W/835/HO/SS/ECO
RESUBMIT
Provide aircraft cable and power cord lengths as noted in submittal review comments by Architect.
13061_Lam Fixture Submittal Review.xlsx
not submitted NOT SUBMITTED
RESUBMIT
Page 2 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Provide aircraft cable and power cord lengths as noted in submittal review comments by Architect. Suspension lengths exceed maximum battery distance – advise re: inverter or alternate approach.
Status
Submitted Lamp osram sylv 20192 #FP24/21W/830/HO/SS/ECO
P4E
Reviewed 7-Jul-2015
REVIEWED WITH COMMENTS
R1
Reviewed 23-Jun-2015
REVIEWED
N/A
R1D
Reviewed 23-Jun-2015
REVIEWED
N/A
R1DE
Reviewed 23-Jun-2015
REVIEWED
N/A
R1E
Reviewed 23-Jun-2015
REVIEWED
N/A
R2
Reviewed 15-Sep-2015
REVIEWED
N/A
R2D
Reviewed 15-Sep-2015
REVIEWED
N/A
R3
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
Engineer to verify type of driver and dimming requirements. Provide reflector finish "MW – Matte White" and trim option "OGPY – Opal Glass Flared Cone".
N/A
R3E
Reviewed 21-Oct-2015
REVIEWED WITH COMMENTS
Engineer to verify type of driver and dimming requirements. Provide reflector finish "MW – Matte White" and trim option "OGPY – Opal Glass Flared Cone".
N/A
R5
Reviewed 23-Jun-2015
REVIEWED
N/A
R5E
Reviewed 23-Jun-2015
REVIEWED
N/A
R7
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
R7E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
R8
Reviewed 23-Jun-2015
DELETED
DELETED
R8E
Reviewed 23-Jun-2015
DELETED
DELETED
RB2
Reviewed 9-Jul-2015
REVIEW BY OTHERS
RESUBMIT
RB3
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
RC18
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
RC18E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
S2
Reviewed 23-Jun-2015
REVIEWED
N/A
S3D
Reviewed 15-Sep-2015
NOT SUBMITTED
NOT SUBMITTED
S4
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
RESUBMIT
Lamp Comments Provide 3500K lamps: 20193 #FP24/21W/835/HO/SS/ECO
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
n/a (LED)
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO osram sylv 22139 #FO25/835/ECO
Provide 3100-lumen/2200-lumen lamps: 21697 #FO32/835/XPS/ECO / 22154 #FO25/835/XPS/ECO Engineer to verify lamp type and color temperature.
n/a (LED)
osram sylv 22135 #FO17/835/ECO
Provide 1400-lumen lamps: 22151 #FO17/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 22135 #FO17/835/ECO
Provide 1400-lumen lamps: 22151 #FO17/835/XPS/ECO Engineer to verify lamp type and color temperature.
n/a (LED)
not submitted
By Restoration Subcontractor – submit for review.
Submit for review.
n/a (LED)
13061_Lam Fixture Submittal Review.xlsx
Page 3 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015
Reviewed by: KL/AB
Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Fixture Comments
Status
Status
Submitted Lamp
Lamp Comments
n/a (LED)
S4E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
W1
Reviewed 23-Jun-2015
REVIEWED
RESUBMIT
W2
Reviewed 23-Jun-2015
REVIEWED
REVIEWED
W2E
Reviewed 23-Jun-2015
REVIEWED
REVIEWED
W3
Reviewed 23-Jun-2015
REVIEWED
N/A
W3D
Reviewed 23-Jun-2015
REVIEWED
N/A
W4D
Reviewed 15-Sep-2015
NOT SUBMITTED
W5D
Reviewed 7-Jul-2015
REVIEWED WITH COMMENTS PROVIDE SHOP DRAWINGS
WC
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
WC1
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
WC1E
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
WCE
Reviewed 23-Jun-2015
REVIEW BY OTHERS
RESUBMIT
X1
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
X2
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
X3
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
ELEV2
Reviewed 23-Jun-2015
REVIEW BY OTHERS
N/A
ELEV3
Reviewed 23-Jun-2015
REVIEW BY OTHERS
NOT SUBMITTED
LC&D
Reviewed 23-Jun-2015
NOT SUBMITTED
osram sylv 21304 #FP14/13W/835/SS/ECO
osram sylv 20580 #FT24DL/835/ECO
osram sylv 20580 #FT24DL/835/ECO
n/a (LED)
n/a (LED)
not submitted
By Restoration Subcontractor – submit for review.
Submit for review.
NOT SUBMITTED n/a (LED)
Provide shop drawings for review showing continuous run lengths and complete configurations with illuminated corner components. N/A
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
osram sylv 21779 #FO32/835/ECO
Provide 3100-lumen lamps: 21697 #FO32/835/XPS/ECO Engineer to verify lamp type and color temperature.
n/a (LED)
n/a (LED)
n/a (LED)
n/a (included)
osram sylv 11374 #75A19 130V
Engineer to verify lamp type and voltage.
n/a (controls)
Submit for review by others. N/A
Definitions: REVIEWED: The product conforms to the design intent and may be provided as submitted. REVIEWED WITH COMMENTS: The product may be provided on the condition that it complies with these comments. RESUBMIT: The product as submitted does not comply with the contract documents. Resubmit in accordance with contract documents and these comments. SUBMIT ADDITIONAL: ... NOT SUBMITTED: The product must be submitted for review. REVIEW BY OTHERS: The product is outside Lam Partners Inc's scope and shall be reviewed by others. DELETED: The submitted product is no longer specified for use in the project. HOLD: Product not reviewed – see comments.
13061_Lam Fixture Submittal Review.xlsx
Page 4 of 5
LIGHTING FIXTURE SUBMITTAL REVIEW Salem Probate Court
Lam Project 13061
Date issued: 21-Oct-2015 Submittal number: 260001 – #18 Rev 4
Checked by: RJO
Date received: 19-Oct-2015
Type
Date
Status
Fixture Comments
Status
Reviewed by: KL/AB
Submitted Lamp
Lamp Comments
Our review comments are in addition to comments provided by the Architect, Electrical Engineer, and others designated by the Architect to review these submittals. This review does not extend to engineering, code compliance, or coordination with environmental conditions, electrical supply, or building systems. Our review does not constitute an approval to bid, order, purchase, fabricate, or install, which require review and approval by the Electrical Engineer, Architect, and General Contractor or Construction Manager. Our review does not relieve any supplier or contractor of any requirement to conform to the Contract Documents. Any fixture types not listed above were not reviewed by Lam Partners.
13061_Lam Fixture Submittal Review.xlsx
Page 5 of 5
LETTER OF TRANSMITTAL
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road DATE
HOLLISTON, MASSACHUSETTS, 01746
ATTENTION
PHONE (508) 429-8830
2056
Rob Day, Andrew Farrell
RE:
FAX (508) 429-7825
JOB NO:
10/2/2015
Salem Probate/Family Court Renovations
cc: Ken Nobrega, Steve Koutalakis TO
W.T. Rich Company
[email protected]
29 Crafts Street, Suite 300
[email protected]
Newton, MA 02458
[email protected]
(617) 487-6010
[email protected]
WE ARE SENDING YOU
COPIES
Attached
Under Separate Cover Via
Shop Drawings
Prints
Copy of Letter
Change Order
DATE
Plans x
Samples
Specifications
Submittals
NO.
10/2/2015
the following items:
DESCRIPTION
Section 260001 - 2.18 - Light Fixtures - Rev. 8
THESE ARE TRANSMITTED as checked below: x
x
For approval
Approved as submitted
Resubmit
copies for approval
For your use
Approved as noted
Submit
copies for distribution
As requested
Returned for corrections
Return
corrected prints
For review and comment FOR BIDS DUE
PRINTS RETURNED AFTER LOAN TO US
REMARKS
COPY TO
Mike Duffy,Joe Hudock,Jim Boudreau,Jeremiah Kimball,File
Trish Lazdowsky
SIGNED:
Expeditor/Submittals Administrator
Licenses: MA A8999 AL 16318
VT EM3303 RI AC003520
NH 4223M GA EN213065
ME MC60017598 NC 16529U
CT ELC.0123697-E1
SC- M3477
If enclosures are not as noted, kindly notify us at once.
October 2, 2015
PROJECT:
Salem Probate/ Family Court Renovations 36 Federal Street Salem, MA 01970
OWNER:
DCAMM One Ashburton Place Boston, MA 02108
GENERAL CONTRACTOR:
W.T. Rich Company 29 Crafts Street, Suite 300 Newton, MA 02458
ARCHITECT:
Perry Dean Rogers Partners 177 Milk Street Boston, MA 02109
ELECTRICAL ENGINEER:
BVH Integrated Services 1 Gateway Circle, Suite 506 Newton, MA 02458
ELECTRICAL CONTRACTOR:
Wayne J. Griffin Electric, Inc. 116 Hopping Brook Road Holliston, MA 01746
We herein submit the following electrical equipment for the Salem Probate/Family Court Renovations project for your approval: Section 260001 – 2.18 – Light Fixtures – Rev. 8
PROJECT:
Salem Probate/Family Court Renovations Salem, MA
SUBMITTAL:
Section 260001 – 2.18 – Light Fixtures – Rev. 8
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road Holliston, MA 01746
Reviewed by:
Mike Duffy
Date: October 2, 2015
pal
BOSTON LIGHT SOURCE 64 COMMERCIAL WHARF BOSTON, MA 02110 Phone: 617-788-2400 Fax: 617-367-0925 Contact: Emilie Pastore
Salem Probate Court 14-17899-8 8/7/2015
Project 14-17899-8 Salem Probate Court Submitted By
BOSTON LIGHT SOURCE
Type
Manufacturer
Catalog Number
R3
Spectrum
R3E
Spectrum
SGE5LEDOS 9L 35K DO102 AR5223OS (f) SGE5LEDOS 9L 35K DO102 EM2 AR5223OS (f)
Project 14-17899-8 Salem Probate Court
Catalog Number
Submitted By
Notes
BOSTON LIGHT SOURCE
Please confirm part number required
MACHINED ALUMINUM HEAT SINK
ZHAGA COMPLIANT LED MODULE
Type
SGE5LEDOS 9L 35K DO102 AR5223OS (f)
R3
DECO-TRIM LED DOWNLIGHT
recessed fixtures
OS SERIES / 35 WATT MAX
TWO STAGE OPTICAL SYSTEM WITH DIFFUSER LENS
SGE5LEDOS APPLICATION #20 GA GALVANIZED STEEL HOUSING
MULTI-BAR MOUNTING BRACKET
Round OS Series LED downlight with Decorative flared glass or acrylic accent adds visual detail and ceiling brightness. FEATURES Delivers a range of 547-2385 lumens. Two-stage optical system for smooth light distribution. Zhaga LED module for ease of maintenance and replacement. Shallow plenum design (under 4.5" depth). Tool-less LED module, driver, and J-Box access. Multi-Bar mounting brackets. BH27 Standard mounting bars included. Posi-lock trim retention torsion springs. Integral 0.625" collar, with plaster option (PR) for up to 3" thick ceiling. FINISH Variety of powdercoat and anodized finishes available. ELECTRONICS LED module features high brightness white Nichia LEDs. 3-step MacAdam Ellipses binning and CRI 84 minimum. Variety of electronic 120v/277v and dimming drivers. CONSTRUCTION Extruded and machined 6063-H32 aluminum heatsink. Carbon gasket for optimal thermal management. Housing/frame constructed of #20 ga. galvanized steel
A
D
to resist corrosion. Self flanged one piece trim spun from 0.063" thick high purity aluminum and finished to specification. Deco-Trim accent is available in molded opal glass or frosted acrylic. CODE COMPLIANCE
S1 S2
B
C
ARRA Compliant. Non-IC rated. ETL/UL/CSA listed for damp locations. LM79/ LM80/TM21 data available. Optional Wet location. Manufactured and built to UL
A
B
C
D
S1
S2
4.38 111.252 mm
0.625 15.875 mm
13.3 337.82 mm
7.9 201.213 mm
5.0 127.0 mm
6.3 160.02 mm
SERIES
LUMENS1
SGE5LEDOS
9L 14L 976 Lumens 25L 1593 Lumens 35L 2385 Lumens 547 Lumens
CCT 27K 30K 35K 40K
2700º K 3000º K 3500º K 4000° K
standards No. 1598/8750.
DRIVER2
OPTIONS3
TRIM / FINISH
TRIM OPTIONS
E1 Electronic, 120v E2 Electronic, 277v DS2W1 2 Wire Phase Dimming, 120v 9w Only DO101 0-10v Dimming, 120v to 1% DO102 0-10v Dimming, 277v to 1% DS101 0-10v Dimming, 120v to 10% DS102 0-10v Dimming, 277v to 10% DLTE1 Lutron 2 Wire Phase Dimming, 120v Only DL331 Lutron Hi Lume Dimming, 120v DL332 Lutron Hi Lume Dimming, 277v DL3E1 Lutron ECO System Dimming, 120v DL3E2 Lutron ECO System Dimming, 277v
BH27 27" Mounting Bars BH6 6"-12" Expandable Mounting Bars BH12 12"- 24" Expandable Mounting Bars CB24 C-Channel Bars FS Fusing EM1 Emergency Battery Pack 120v EM2 Emergency Battery Pack 277v CR Corrosion Resistant PR Plaster Ring TBC T-bar Clips (for BH27) GR Goof Ring EB Eco Black Powdercoat
AR5223OS MW Matte White SG Semi-Diffuse Low Iridescent CL Specular Alzak HZ Matte Low Iridescent MB Matte Black PT Platinum PF Polished Flange WE Wheat Alzak CC Custom Color
FAPY Frosted Acrylic Flared Cone FGPY Frosted Glass Flared Cone OGPY Opal Glass Flared Cone OAPY Opal Acrylic Flared Cone
4
Advise finish
EXAMPLE: SGE5LEDOS25L35KE1/AR5223OS FAPY
5
NOTES: 1 Delivered Lumens at 3500°K 2 Contact Factory for Additional Dimming or Control Options 3 See Product Options Page For Ordering, Detail and Specifications 4 BH27 Mounting Bars Standard
Dimensions and values shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
PROJECT:
YEAR WARRANTY
TYPE:
CAT. NO.: WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 1501
Project 14-17899-8 Salem Probate Court
Catalog Number
Submitted By
Notes
BOSTON LIGHT SOURCE
Please confirm part number required
MACHINED ALUMINUM HEAT SINK
ZHAGA COMPLIANT LED MODULE
Type
SGE5LEDOS 9L 35K DO102 EM2 AR5223OS (f)
R3E
DECO-TRIM LED DOWNLIGHT
recessed fixtures
OS SERIES / 35 WATT MAX
TWO STAGE OPTICAL SYSTEM WITH DIFFUSER LENS
SGE5LEDOS APPLICATION #20 GA GALVANIZED STEEL HOUSING
MULTI-BAR MOUNTING BRACKET
Round OS Series LED downlight with Decorative flared glass or acrylic accent adds visual detail and ceiling brightness. FEATURES Delivers a range of 547-2385 lumens. Two-stage optical system for smooth light distribution. Zhaga LED module for ease of maintenance and replacement. Shallow plenum design (under 4.5" depth). Tool-less LED module, driver, and J-Box access. Multi-Bar mounting brackets. BH27 Standard mounting bars included. Posi-lock trim retention torsion springs. Integral 0.625" collar, with plaster option (PR) for up to 3" thick ceiling. FINISH Variety of powdercoat and anodized finishes available. ELECTRONICS LED module features high brightness white Nichia LEDs. 3-step MacAdam Ellipses binning and CRI 84 minimum. Variety of electronic 120v/277v and dimming drivers. CONSTRUCTION Extruded and machined 6063-H32 aluminum heatsink. Carbon gasket for optimal thermal management. Housing/frame constructed of #20 ga. galvanized steel
A
D
to resist corrosion. Self flanged one piece trim spun from 0.063" thick high purity aluminum and finished to specification. Deco-Trim accent is available in molded opal glass or frosted acrylic. CODE COMPLIANCE
S1 S2
B
C
ARRA Compliant. Non-IC rated. ETL/UL/CSA listed for damp locations. LM79/ LM80/TM21 data available. Optional Wet location. Manufactured and built to UL
A
B
C
D
S1
S2
4.38 111.252 mm
0.625 15.875 mm
13.3 337.82 mm
7.9 201.213 mm
5.0 127.0 mm
6.3 160.02 mm
SERIES
LUMENS1
SGE5LEDOS
9L 14L 976 Lumens 25L 1593 Lumens 35L 2385 Lumens 547 Lumens
CCT 27K 30K 35K 40K
2700º K 3000º K 3500º K 4000° K
standards No. 1598/8750.
DRIVER2
OPTIONS3
TRIM / FINISH
TRIM OPTIONS
E1 Electronic, 120v E2 Electronic, 277v DS2W1 2 Wire Phase Dimming, 120v 9w Only DO101 0-10v Dimming, 120v to 1% DO102 0-10v Dimming, 277v to 1% DS101 0-10v Dimming, 120v to 10% DS102 0-10v Dimming, 277v to 10% DLTE1 Lutron 2 Wire Phase Dimming, 120v Only DL331 Lutron Hi Lume Dimming, 120v DL332 Lutron Hi Lume Dimming, 277v DL3E1 Lutron ECO System Dimming, 120v DL3E2 Lutron ECO System Dimming, 277v
BH27 27" Mounting Bars BH6 6"-12" Expandable Mounting Bars BH12 12"- 24" Expandable Mounting Bars CB24 C-Channel Bars FS Fusing EM1 Emergency Battery Pack 120v EM2 Emergency Battery Pack 277v CR Corrosion Resistant PR Plaster Ring TBC T-bar Clips (for BH27) GR Goof Ring EB Eco Black Powdercoat
AR5223OS MW Matte White SG Semi-Diffuse Low Iridescent CL Specular Alzak HZ Matte Low Iridescent MB Matte Black PT Platinum PF Polished Flange WE Wheat Alzak CC Custom Color
FAPY Frosted Acrylic Flared Cone FGPY Frosted Glass Flared Cone OGPY Opal Glass Flared Cone OAPY Opal Acrylic Flared Cone
4
Advise finish
EXAMPLE: SGE5LEDOS25L35KE1/AR5223OS FAPY
5
NOTES: 1 Delivered Lumens at 3500°K 2 Contact Factory for Additional Dimming or Control Options 3 See Product Options Page For Ordering, Detail and Specifications 4 BH27 Mounting Bars Standard
Dimensions and values shown are nominal. Spectrum Lighting is continually improving products and reserves the right to make changes that will not alter performance or appearance with or without written notice.
PROJECT:
YEAR WARRANTY
TYPE:
CAT. NO.: WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 1501
LETTER OF TRANSMITTAL
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road DATE
HOLLISTON, MASSACHUSETTS, 01746
ATTENTION
PHONE (508) 429-8830
2056
Rob Day, Andrew Farrell
RE:
FAX (508) 429-7825
JOB NO:
10/6/2015
Salem Probate/Family Court Renovations
cc: Ken Nobrega, Steve Koutalakis TO
W.T. Rich Company
[email protected]
29 Crafts Street, Suite 300
[email protected]
Newton, MA 02458
[email protected]
(617) 487-6010
[email protected]
WE ARE SENDING YOU
COPIES
Attached
Under Separate Cover Via
Shop Drawings
Prints
Copy of Letter
Change Order
DATE
Plans x
Samples
Specifications
Submittals
NO.
10/6/2015
the following items:
DESCRIPTION
Section 260001 - 2.18 - Light Fixtures - Rev. 9 - Type G/G9A Fixture - Please Note: This fixture needs to be modified to meet the submittal comments and there will be an extra cost.
THESE ARE TRANSMITTED as checked below: x
x
For approval
Approved as submitted
Resubmit
copies for approval
For your use
Approved as noted
Submit
copies for distribution
As requested
Returned for corrections
Return
corrected prints
For review and comment FOR BIDS DUE
PRINTS RETURNED AFTER LOAN TO US
REMARKS
COPY TO
Mike Duffy,Joe Hudock,Jim Boudreau,Jeremiah Kimball,File
Trish Lazdowsky
SIGNED:
Expeditor/Submittals Administrator
Licenses: MA A8999 AL 16318
VT EM3303 RI AC003520
NH 4223M GA EN213065
ME MC60017598 NC 16529U
CT ELC.0123697-E1
SC- M3477
If enclosures are not as noted, kindly notify us at once.
October 6, 2015
PROJECT:
Salem Probate/ Family Court Renovations 36 Federal Street Salem, MA 01970
OWNER:
DCAMM One Ashburton Place Boston, MA 02108
GENERAL CONTRACTOR:
W.T. Rich Company 29 Crafts Street, Suite 300 Newton, MA 02458
ARCHITECT:
Perry Dean Rogers Partners 177 Milk Street Boston, MA 02109
ELECTRICAL ENGINEER:
BVH Integrated Services 1 Gateway Circle, Suite 506 Newton, MA 02458
ELECTRICAL CONTRACTOR:
Wayne J. Griffin Electric, Inc. 116 Hopping Brook Road Holliston, MA 01746
We herein submit the following electrical equipment for the Salem Probate/Family Court Renovations project for your approval: Section 260001 – 2.18 – Light Fixtures – Rev. 9 – Type G9/G9A
PROJECT:
Salem Probate/Family Court Renovations Salem, MA
SUBMITTAL:
Section 260001 – 2.18 – Light Fixtures – Rev. 9 – Type G/G9A Fixture
WAYNE J. GRIFFIN ELECTRIC, INC. 116 Hopping Brook Road Holliston, MA 01746
Reviewed by:
Mike Duffy
Date: October 6, 2015
pal
Oct 2, 2015
RE:
Qty
Salem Probate Court - Bega
Type
0
G9 / G9A
MFG
Part
Bega
8554LED-FINISH / MOD 180 DEGREE HSS
Item Note:
FF00010
Please advise finish
Omni-Lite 263 Winn St. Burlington, MA 01803
781-272-2300
Page 1/1
Submitted by Omni-Lite
Job Name: Salem Probate Court - Bega Architect: Perry Dean Rogers Partners (Boston) Contractor: Wayne J. Griffin Electric (Holliston)
Catalog Number: 8554LED-FINISH / MOD 180 DEGREE HSS Notes: Please advise finish
Type:
G9 / G9A OMNI15-39044
LED Bollards with rotationally symmetrical distribution
Post construction: One piece extruded aluminum, with a one piece aluminum top housing and base, internally welded into an assembly. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy. Enclosure: Heavy walled, die-cast aluminum cap. Clear 3⁄16" thick borosilicate glass with pure anodized aluminum cone reflector. Fully gasketed using high temperature silicone rubber O-ring gaskets. Electrical: 18.2 W LED luminaire, 24.5 total system watts, -20° C start temperature. Integral 120 V through 277 V electronic LED driver, dimming not available. LED module(s) are available from factory for easy replacement. Standard LED color temperature is 3000K with a >80 CRI. Available in 4000K (>80 CRI); add suffix K4 to order. Note: Due to the dynamic nature of LED technology, LED luminaire data on this sheet is subject to change at the discretion of BEGA-US. For the most current technical data, please refer to www.bega-us.com.
Type: BEGA Product: Project: Voltage: Color: Options: Modified:
Anchor base: Heavy cast aluminum, slotted for precise alignment. Mounts to BEGA #895 A anchorage kit (supplied). Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV). To specify, add appropriate suffix to catalog number. Custom colors supplied on special order.
ADVISE COLOR
UL listed for US and Canadian Standards, suitable for wet locations. Protection class IP65. Luminaire Lumens: 881 Tested in accordance with LM-79-08
A
A
B
A B B
Lamp
8554 LED
18.2 W LED
A
B
Anchorage
6 1⁄2 39 3⁄8
895 A
1000 BEGA Way, Carpinteria, CA 93013 ( 805 ) 684-0533 FAX ( 805 ) 566-9474 www. bega-us . com ©copyright BEGA-US 2014
Updated 05/14
MODIFIED TO HAVE 180 DEGREE HOUSE SIDE SHIELD
