Thursday, October 4, 2012
Thursday, October 4, 2012 Cornlea Iron Unreserved Auctions
First Lot Closes at 10:01 A.M. Central Time.
EVERY Item Sells To The Highest Bidder With NO Minimums, NO Reserves. Bid Online at CORNLEAIRON.COM Or Contact A Cornlea Iron Rep For Absentee Bid.
• John Deere 4630 Tractor-1973 Model; 3PT Quick Hitch; Dual Hydraulics; Paint Fair-Faded And Normal Wear; Front Weights; Synchro Transmission; Rear 20.8-38 Tires- GoodApprox 50-60%; Rear Clamp On Duals-25%; Transmission Hard Shift; Newer Brown Vinyl Seat; AC And Blower Motor Not Currently Working; Some Oil Leaks; Interior Is Fair; Tractor Starts And Drives Good. SN:3062; HRS:1302 Shows; Location: Clarkson, Nebraska; Owner: Platte Valley Equipment- 402.892.3444 • Farmall 1066 Tractor-1973; 16/8 Speed Transmission; 3PT; IH 6-Cylinder Diesel Engine; Dual Hydraulics; 540/1000 PTO; With Westendorf Loader; Exterior In Fair To Good Shape; Some Liquid Leaks; Interior Fair-Seat Torn-No Upholstery; Rear 18.4-38 Tires-Good Shape; Front Tires FairMismatch; Loader In Good Shape-Some Welds; 7’ Bucket Good-Small Hole; Starts And Run Good; Overall A Good 1066 Tractor With Loader; SN:024851; HRS:8010; Location: Clarkson, Nebraska; Owner: Platte Valley Equipment- 402.892.3444 • Ford 901 Tractor-Select-O-Speed; 3PT; Round Fender; NF; Frame In Good Shape; Tires Fair To Good Shape; Paint Fair; 3PT; Direct Gears; Some Work Fine; Some Kick Out; Engine Heater; Used On Small Farm; Starts And Runs Good. Owner: Dan Humlicek- 402.276.0749; Location: Linwood, Nebraska
• John Deere 4840 Tractor-1978 Model; 8-Speed Power-Shift Transmission; Triple Hydraulics; Rear Quick Hitch; 15 Front Weights; Rear 18.4-42 Michelin Tires-Good Shape-Good Tread; Goodyear Duals-Good Tread-Fair Shape-Some Cracks; Rear Inside Tire Weights; Exterior In Fair To Good Shape-Normal Wear; Paint Faded; Interior Good-Clean; Tractor Starts And Runs Good; Overall A Good 4840 Tractor. SN:002514; HRS:10381; Location: Clarkson, Nebraska; Owner: Platte Valley Equipment- 402.892.3444 • John Deere 400 Rotary Hoe-40’ Long; 11’ Wings; 5″×7″ Tube; 21.8’ Middle Section; Wing Stops; Orthman 3PT Front Hookup; Double Hydraulic Fold; Dual Front Jack Stands; Frame In Good Shape; Hoses In Good Shape; 8-Discs Missing; Location: Albion, Nebraska; Owner: Jim Meisenburg- 402.741.1387 • Case IH RBX-562 Baler-One-Owner; 2003 Model; Approx 5,000 Bales; Twine-Tie; Fingers-Good Shape; Belts Fair To Good Shape-1 Belt Will Need Repaired; Tires-Good ShapeGood Rubber; Paint Is Fair-Some Fading-Some Rust Marks; Appears All Chains And Sprockets Are Good; Owner: Ronald Nealeigh- 308.334.5632; Location: Trenton, Nebraska
• Case IH 2366 Combine-2002 Model; Exterior In Good Shape-Paint Good-Some Minor Rust Spots; Interior Good Clean Shape; New Radiator; New Feeder Chain; Re-Built Discharge Auger; Like New Vertical Auger; Front 24.5-32 Goodyear Tires-Good Shape-Good Tread; Rear 14.9-24 Tires-Good Shape-Good Tread; Standard Final Drive; Heavy Duty Rear Axle; Specialty Rotor; Dual Cylinder Speed; Contour Feeder House; Rear Straw Spreader (1)Missing; Grain Bin Extension; Yield Moisture Monitor; AGLeader GPS 2000; FORE/AFT; Overall A Very Nice 2366 Combine.SN: JJC0255266; HRS: 2661/1920 • John Deere 9600 Combine-1990 Model; Exterior In Good Shape; Interior In Good Clean Shape; Rear Chopper; Rear Spreader; Level Land Option; Chaff Spreader; Bin Extension; Just Came In Off Trade; Front Goodyear 30.5×32 Tires Good Shape-Good Tread; Rear 14.9-24 Tires-Good Shape-Good Tread; Augers Appear Good-Flighting Good; Always Stored Inside;Been Through Victors Equipment Every Year For Service; Overall A Very Nice 9600 Combine. SN:638112; HRS:3728/2601. • Case IH 2366 Combine-1998 Model; AFX Rotor Thrashing; Contour Feeder; Auto Speed And Auto Height; FORE/AFT; External Sieve Adjustment; 144" Axel; Diesel; Exterior In Good Shape; Appears To Have No Breaks-Some Minor Bends; Paint Good; No Rust; Flighting Appears All Good; Some Very Minor Weld On Auger; Front 24.5-32 Good Year Tires-Fair To Good Shape; Interior In Good Clean Condition; Very Well Taken Care Of; Local Trade; Starts And Runs Good; SN: 0185575; HRS: 3680/2755 John Deere 630 Disk Harrow-30’ Long; 9" Spacings; Double Hydraulic Fold; Frame In Good Shape; Harrow In Good Shape-Fingers Appear Good; Tires Fair To Good-Some Cracking; Outside Stuble Tires; Hydraulic And Hoses Appear Good; Rear Discs Measure Approx 20"; Front Discs Measure Approx 18.25"; Overall A Good Disk Harrow. SN:012212 • Case IH 2020 Grain Head-25’ Long; Crary Air Reel; 2005 Model; Frame In Good Shape; Floor In Good Shape; Augers In Good Shape; Fingers In Good Shape; Crary Air Reel And System Good Shape; Appears All Chains And Sprockets Good; Dual PTO Shafts; End Snoots Good Shape; Lights Good; Overall A Very Nice 2020 25’ Air Reel Grain Head. SN: CBJ020387 • Case IH 1064 Cornhead-1994 Model; Frame In Good Shape; Knives Fair; Some Holes On Feederhouse Hookup; Some Snoot Welds And Repairs; Normal Wear; Paint Fair; Appears All Chains And Sprockets Good. SN: 0148954
Case IH 1083 Cornhead-1996 Model; 8-Row; 30" Spacings; Frame In Good Shape; Snoots In Good Shape; Bonnets In Good Shape; Left And Right Poly End Snoots And Bonnets; Appears All Chains And Sprockets Are Good; Floor In Good Shape; Auger In Good Shape; Normal Wear And Tear Dents And Surface Rust; Appears The Knives Are Good; Corn And Ear Savers; Lights On End. SN:0154049 • Gravely Zero Turn Lawn Mower-2044XL Model; 44" Mowing Deck; Exterior In Good Shape; Paint Good-Some Minor Normal Fading; Tires Good Shape; No Breaks; No Repairs; Side Discharge; Kohler 20 HP Engine; Seat Is Good; Blades Appear Good; Unit Always Stored Inside; Used Very Little In Past 2 Years; Starts And Runs Good; Overall A Nice Gravely Mower. • Case IH 1044 Cornhead-1988 Model; 38" Spacings; Frame In Good Shape; Snoots Fair To Good Shape; Bonnets Fair To Good; Right Poly Snoot And Right Poly Bonnet; Knives Appear Good; Normal Wear; Floor Appears Good; Auger Appears Good; 540 PTO • Case IH 1054 Cornhead-1995 Model; 36" Spacings; Frame In Good Shape; Floor In Good Shape; Auger Appears in Good Shape; Snoots And Bonnets Good Shape; Chains And Sprockets Appear Good; Corn And Ear Savers; Lights On Both Sides; Knives Appear Good; Paint Fair To Good. SN:151561 • International 800 Planter-12 Row; 30" Spacings; CycloAir; Frame In Good Shape; Hydraulic Fold; Markers; Paint Fair; Tires Fair; Boxes Appear Good; Hoses And Hydraulics Appear Good; Does Not Appear To Have Any Breaks Or Welds. SN:015308 • Peck Auger-Swing Hopper; 8" Tubing; 71’ Long; Auger In Good Shape; Undercarriage Good; Tires Fair To Good; Swing Hopper Auger Good Shape; Some Welds On Outside; Hoses Appear Good; Front Jack Stand; Overall A Good Peck Auger; SN:4948556 • Case IH 1044 Cornhead-4 Row; 38" Spacings; 1987 Model; Frame In Fair To Good Shape; Snoots Good Shape; Bonnets Good Shape; Normal Wear And Tear Dents; Paint Fair To Good-Normal Fading; Knives Appear Good; Ear And Corn Savers; Chains And Sprockets Appear Good; SN:03045 • Case IH 1054 Cornhead-5-Row; 36" Spacings; 1998 Model; Frame In Good Shape; Floor In Good Shape; All Snoots In Good Shape; All Bonnets In Good Shape; One Weld On Right Side; Ear And Corn Savers Good Shape; Auger Appears in Good Shape; Chains And Sprockets Good; Dual Lights; Paint Good-Normal Wear And Some Minor Fading; Knives Appear Good; SN:0243895
• Chevy Fuel Truck-C-6500; 5-Speed High/Low Manual Transmission; 396 Long Block With Less Than 10,000 Miles; Bench Seat; AM/FM Radio; Heater; Roll Up Window; Rear 5.5 HP Briggs And Stratton Motor; 2" Banjo Pump; 10R22.5 Rear And Front Tires-Good Shape-Good Tread; 1600 Tank; Rear Hitch; Rear Fenders; 25’ Hose-High Flow Nozzle; Interior Clean; Used On Local Farm For Years; Starts And Runs Good; Location: Albion, Nebraska; Owner: Jim Meisenburg- 402.741.1387 • International 490 Disk-24’ Long; Frame In Good Shape; Appears To Have No Breaks Or Welds; Rear Blades Measure Approx 18.5"; Front Blades Measure Approx. 17.5"; 7" Spacings; Tires Fair-Some Cracking; Heavy Duty And Good Looking Disc; Location: David City, Nebraska Owner: Bill Juranek- 402.641.7835
All Items Located At Michael Wegener Implement In Cornlea ,Nebraska
• Rowse Hay Inverter-Frame In Good Shape; Belts And Fingers Good Shape; Hoses Appear Good; Hydraulics Good; Paint Good Shape; Was Used Last Season; Appears To Have No Breaks Or Welds; Heavy Duty Frame; Owner: Al Hocheder - 970.768.0233 • Brady Running Gear-Auto-Steer; 14’ Long; 6-Bolt Rims; 8.5L-14 Tires-Fair To Good; Frame Good Shape-Normal Surface Rust; No Breaks; Some Added Holes For Box Support; Owner: Bill Juranek - 402.641.7835
ALL ITEMS LOCATED AT VICTORS EQUIPMENT IN FREMONT NEBRASKA OWNER-BRAD- 402-727-4200
NO Buyer’s Premiums
For more information, call Cornlea
• John Deere 643 Cornhead-High-Tin; Frame Fair-Welds On Rear; Snoots In Fair To Good Shape; Paint Fair; Normal Wear On Paint And Tin; Chains And Sprockets Appear Good. • Bobcat Asphalt Grinder-7’ Total Length; 16" High Flow Surface Planer Length; Frame In Good Shape; Teeth Appear In Good Shape; Normal Wear And Tear; Worked Great Last Time Used; Hoses Appear Good; Adjustable Angle; Fits Most Makes And Models Of Bobcat. • Ariens Lawn Mower-Model #1944; Zero-Turn Model; 44" Mowing Deck; Kohler Engine; Frame In Good Shape; No Breaks; Exterior Good; Paint Good; Tires Good Shape Good Tread; Seat Good; Handles Appear Straight; Appears To Have No Breaks Or Welds Anywhere-Deck Has Some Normal Scratches And Wear; Knives Appear Good; Used Very Little; Always Stored In Shed; Starts And Runs Good; Overall A Nice Ariens Lawn Mower; HRS:514 • Case IH 1083 Cornhead-1990 Model; Frame In Good Shape; Floor In Good Shape; Auger Appears On Good Shape; Right Snoot And Bonnet Missing; Some Bonnets And Snoots Are Loose And Missing; Knives Appear Good; Not All Tin Is Present; Dual Lights; Remaining Snoots Are Good Shape; Bonnets Good Shape; Normal Wear; SN: 0071710 • Case IH 1044 Cornhead-4 Row; 36" Spacings; 1986 Model; Frame in Good Shape; Floor In Good Shape; Auger Appears In Good Shape; Right Hand Snoot Missing; Remaining Snoots In Good Shape; Bonnets In Good Shape; Knives Appear Good; Ear And Corn Savers; Chains And Sprockets In Good Shape; Feeder House Has Some Normal Wear And Dents; Overall A Good Straight 1044; SN:000836 • Case IH 1054 Cornhead-1987 Model; 5 Row; 36" Spacings; Frame Good Shape; Auger In Good Shape; Floor In Good Shape; Right Poly Snoot; Missing One Middle Snoot; Right Snoot Has Damage; Other Snoots In Good Shape; Bonnets Appear In Good Shape; Corn And Ear Savers; Knives Appear Good; Chains And Sprockets Appear Good; SN:003008 • Case IH 1083 Cornhead-1990 Model; 8-Row; 30" Spacings; Frame In Good Shape; Floor Appears in Good Shape; Auger In Good Shape; Missing Left Snoot And Bonnet; Some Poly Snoots-Good Shape; Rest Of Snoot Fair To Good; Bonnets Appear in Good Shape; Feeder House Has Some Dents; Knives Appear Good; Some Sprockets May Need Replaced; Tinwork Fair;SN:0072035
• Running Gear 7’ Long-6-Bolt Rims; 9.5L-15Sl Tires-Fair; Frame In Good Shape; No Major Breaks; Some Cutting From Gravity Box; Appears Two Different Running Gears Made Into One. Owner: Bill Juranek - 402.641.7835 • Great Bend 651 Backhoe-Tractor Mounted; 180 Degree Rotation; Up And Down Stabilizer Spread; 2-Lever Action; Frame in Good Shape; Hoses Appear In Good Shape; Bucket Good Shape; Seat Minor Cuts; Appears To Have No Breaks Or Repairs; Overall A Good Shaped 651 Backhoe. Owner: Al Hocheder - 970.768.0233 • A.C. Synchronous Generator-230/115 Volt; 87/174 Amp; 20 KW; Frame In Good Shape; Paint Good; Good Shape; Runs Good. Gaoyou Electric Factory. Owner: Randy Zima - 402.624.6365 • Brand New Cattle Chute-Hydraulic; Frame Good; Paint Good; Hoses And Hydraulics Good; Heavy Duty Bracings And Panels; No Rust; No Breaks; Owner: Rob Howell - 402.640.0248 • 7-Bar x 20’ Continuous Panel-Set Of (2)-10 Panels In Bundle; Panel Is Made Of 1 1/4″ × 14 Gauge Round Tubing. Five Uprights Per Panel. Uprights Are Also Made Of 1 1/4″ × 14 Gauge Tubing; Panel Is 55 1/4" Tall And 20’ Long. Pipes Are On 9" Center. Brand New Panels, Straight, Never Used. Clips And Connectors Are Included; Owner: Rob Howell - 402.640.0248 • Set Of 10 Portable Panels-6-Bar x 10’ Coral Panel. Panel Is Made Of 1 1/4″ × 14 Gauge Round Tubing; 5’ Tall x 10’ Long; Connect Together With Pins Held In Place By Washers; Coral Panels Easy To Connect And Are Very Well Made; 80 LBS Per Panel. Never Used, Brand New; Straight; Owner: Rob Howell - 402.640.0248 • IHC 10-Bolt Hubs-(2) Sets Of (2); Bolts Good; Casting Good; No Breaks; No Welds; No Repairs; No Major RustNormal Rusty Color; Couple Bolts Missing; Overall A Good Set Of Hubs. Owner: Randy Zima- 402.624.6365 • 500 Gallon Fuel Trailer-Poly Tank-510 Gallon Max; Kuker Trailer Gear; Rear Jacks Stands; 8-Bolt Rims; Tires-Good Shape; Rear Hitch; Fuel Pump And Nozzle; Manual And Automatic Shut-Off; Tank Good; Owner: Al Hocheder - 970.768.0233 • (60)- 6 Bar 20 Foot Continuous Panel-Set Of 10 Panels In 1 Bundle; Panel Is Made Of 1 1/4″ × 14 Gauge Tubing. 1 1/4″ × 14 Gauge Tubing. 46 1/4" Tall x 20’ Long; Pipes Are On 9" Centers; Brand New Panel; Straight Never Used; Newer Heavy Duty Bar Bracing. Clips And Connectors Are Included. Owner: Rob Howell - 402.640.0248 • Easy-Kleen Pressure Washer-Brand New; Magnum Gold Model; Never Used; 3.6 GPM; 4000PSI Adjustable Pressure; 15HP Electric Start Engine; 120 Volt Burner System; Diesel Fired Burner; 30’ HP Hose; Comes With Gun; Wand; 4 Nozzles; Soap System; Manual; Has Been Covered And Stored Inside; Does NOT Have A Warranty. • Pair Of (2) Orthman Lift Assists Wheels-Model #601-342; Frame In Good Shape; Price 3000 PSI Hydraulic Cylinders; Tires-Goodyear-Good Shape; Some Surface Rust; Appears To Have No Breaks; Some Welds; Hoses Appear Good; Owner: Al Hocheder - 970.768.0233 • John Deere 10-Bolt Hubs-Set Of (2); Bolts Good; Casting Good; No Breaks; No Welds; No Repairs; No Major RustNormal Rusty Color; Some Normal Paint Loss And Scratches; Owner: Randy Zima - 402.624.6365 • (3) Sets Of (2) Driver Rims-John Deere; Brand New; 16×46″ Rims; 12 Hole; No Breaks; No Welds; No Repairs; Paint Good; Never Taken Out Of Original Banding; Overall A Very Nice Brand New Set Of Rims. Owner: Randy Zima402.624.6365 • Bush Hog Disc-22’; Double Fold; 9" Spacings; Front Discs Measure Approx 19.5"; Rear Discs Measure Approx 20"; Dual Case IH 3000 Hydraulics; Hydraulic Hoses Good Shape; Some Welds; Tires Fair To Good; Was Stored Inside For Years; Worked Great Last Season; Owner: Jim Kennedy 402.649.5309
*Additional Items Cont’d on Back*
NO Reserves
Iron or visit WWW.CORNLEAIRON.COM
Jared Wiehn • Cell: 402.920.1689 Office: 402.923.0511 • Toll Free: 888.923.0511 • Email: [email protected]
First Lot Closes at 10:01 A.M. Central Time.
EVERY Item Sells To The Highest Bidder With NO Minimums, NO Reserves. Bid Online at CORNLEAIRON.COM Or Contact A Cornlea Iron Rep For Absentee Bid.
• John Deere 4630 Tractor-1973 Model; 3PT Quick Hitch; Dual Hydraulics; Paint Fair-Faded And Normal Wear; Front Weights; Synchro Transmission; Rear 20.8-38 Tires- GoodApprox 50-60%; Rear Clamp On Duals-25%; Transmission Hard Shift; Newer Brown Vinyl Seat; AC And Blower Motor Not Currently Working; Some Oil Leaks; Interior Is Fair; Tractor Starts And Drives Good. SN:3062; HRS:1302 Shows; Location: Clarkson, Nebraska; Owner: Platte Valley Equipment- 402.892.3444 • Farmall 1066 Tractor-1973; 16/8 Speed Transmission; 3PT; IH 6-Cylinder Diesel Engine; Dual Hydraulics; 540/1000 PTO; With Westendorf Loader; Exterior In Fair To Good Shape; Some Liquid Leaks; Interior Fair-Seat Torn-No Upholstery; Rear 18.4-38 Tires-Good Shape; Front Tires FairMismatch; Loader In Good Shape-Some Welds; 7’ Bucket Good-Small Hole; Starts And Run Good; Overall A Good 1066 Tractor With Loader; SN:024851; HRS:8010; Location: Clarkson, Nebraska; Owner: Platte Valley Equipment- 402.892.3444 • Ford 901 Tractor-Select-O-Speed; 3PT; Round Fender; NF; Frame In Good Shape; Tires Fair To Good Shape; Paint Fair; 3PT; Direct Gears; Some Work Fine; Some Kick Out; Engine Heater; Used On Small Farm; Starts And Runs Good. Owner: Dan Humlicek- 402.276.0749; Location: Linwood, Nebraska
• John Deere 4840 Tractor-1978 Model; 8-Speed Power-Shift Transmission; Triple Hydraulics; Rear Quick Hitch; 15 Front Weights; Rear 18.4-42 Michelin Tires-Good Shape-Good Tread; Goodyear Duals-Good Tread-Fair Shape-Some Cracks; Rear Inside Tire Weights; Exterior In Fair To Good Shape-Normal Wear; Paint Faded; Interior Good-Clean; Tractor Starts And Runs Good; Overall A Good 4840 Tractor. SN:002514; HRS:10381; Location: Clarkson, Nebraska; Owner: Platte Valley Equipment- 402.892.3444 • John Deere 400 Rotary Hoe-40’ Long; 11’ Wings; 5″×7″ Tube; 21.8’ Middle Section; Wing Stops; Orthman 3PT Front Hookup; Double Hydraulic Fold; Dual Front Jack Stands; Frame In Good Shape; Hoses In Good Shape; 8-Discs Missing; Location: Albion, Nebraska; Owner: Jim Meisenburg- 402.741.1387 • Case IH RBX-562 Baler-One-Owner; 2003 Model; Approx 5,000 Bales; Twine-Tie; Fingers-Good Shape; Belts Fair To Good Shape-1 Belt Will Need Repaired; Tires-Good ShapeGood Rubber; Paint Is Fair-Some Fading-Some Rust Marks; Appears All Chains And Sprockets Are Good; Owner: Ronald Nealeigh- 308.334.5632; Location: Trenton, Nebraska
• Case IH 2366 Combine-2002 Model; Exterior In Good Shape-Paint Good-Some Minor Rust Spots; Interior Good Clean Shape; New Radiator; New Feeder Chain; Re-Built Discharge Auger; Like New Vertical Auger; Front 24.5-32 Goodyear Tires-Good Shape-Good Tread; Rear 14.9-24 Tires-Good Shape-Good Tread; Standard Final Drive; Heavy Duty Rear Axle; Specialty Rotor; Dual Cylinder Speed; Contour Feeder House; Rear Straw Spreader (1)Missing; Grain Bin Extension; Yield Moisture Monitor; AGLeader GPS 2000; FORE/AFT; Overall A Very Nice 2366 Combine.SN: JJC0255266; HRS: 2661/1920 • John Deere 9600 Combine-1990 Model; Exterior In Good Shape; Interior In Good Clean Shape; Rear Chopper; Rear Spreader; Level Land Option; Chaff Spreader; Bin Extension; Just Came In Off Trade; Front Goodyear 30.5×32 Tires Good Shape-Good Tread; Rear 14.9-24 Tires-Good Shape-Good Tread; Augers Appear Good-Flighting Good; Always Stored Inside;Been Through Victors Equipment Every Year For Service; Overall A Very Nice 9600 Combine. SN:638112; HRS:3728/2601. • Case IH 2366 Combine-1998 Model; AFX Rotor Thrashing; Contour Feeder; Auto Speed And Auto Height; FORE/AFT; External Sieve Adjustment; 144" Axel; Diesel; Exterior In Good Shape; Appears To Have No Breaks-Some Minor Bends; Paint Good; No Rust; Flighting Appears All Good; Some Very Minor Weld On Auger; Front 24.5-32 Good Year Tires-Fair To Good Shape; Interior In Good Clean Condition; Very Well Taken Care Of; Local Trade; Starts And Runs Good; SN: 0185575; HRS: 3680/2755 John Deere 630 Disk Harrow-30’ Long; 9" Spacings; Double Hydraulic Fold; Frame In Good Shape; Harrow In Good Shape-Fingers Appear Good; Tires Fair To Good-Some Cracking; Outside Stuble Tires; Hydraulic And Hoses Appear Good; Rear Discs Measure Approx 20"; Front Discs Measure Approx 18.25"; Overall A Good Disk Harrow. SN:012212 • Case IH 2020 Grain Head-25’ Long; Crary Air Reel; 2005 Model; Frame In Good Shape; Floor In Good Shape; Augers In Good Shape; Fingers In Good Shape; Crary Air Reel And System Good Shape; Appears All Chains And Sprockets Good; Dual PTO Shafts; End Snoots Good Shape; Lights Good; Overall A Very Nice 2020 25’ Air Reel Grain Head. SN: CBJ020387 • Case IH 1064 Cornhead-1994 Model; Frame In Good Shape; Knives Fair; Some Holes On Feederhouse Hookup; Some Snoot Welds And Repairs; Normal Wear; Paint Fair; Appears All Chains And Sprockets Good. SN: 0148954
Case IH 1083 Cornhead-1996 Model; 8-Row; 30" Spacings; Frame In Good Shape; Snoots In Good Shape; Bonnets In Good Shape; Left And Right Poly End Snoots And Bonnets; Appears All Chains And Sprockets Are Good; Floor In Good Shape; Auger In Good Shape; Normal Wear And Tear Dents And Surface Rust; Appears The Knives Are Good; Corn And Ear Savers; Lights On End. SN:0154049 • Gravely Zero Turn Lawn Mower-2044XL Model; 44" Mowing Deck; Exterior In Good Shape; Paint Good-Some Minor Normal Fading; Tires Good Shape; No Breaks; No Repairs; Side Discharge; Kohler 20 HP Engine; Seat Is Good; Blades Appear Good; Unit Always Stored Inside; Used Very Little In Past 2 Years; Starts And Runs Good; Overall A Nice Gravely Mower. • Case IH 1044 Cornhead-1988 Model; 38" Spacings; Frame In Good Shape; Snoots Fair To Good Shape; Bonnets Fair To Good; Right Poly Snoot And Right Poly Bonnet; Knives Appear Good; Normal Wear; Floor Appears Good; Auger Appears Good; 540 PTO • Case IH 1054 Cornhead-1995 Model; 36" Spacings; Frame In Good Shape; Floor In Good Shape; Auger Appears in Good Shape; Snoots And Bonnets Good Shape; Chains And Sprockets Appear Good; Corn And Ear Savers; Lights On Both Sides; Knives Appear Good; Paint Fair To Good. SN:151561 • International 800 Planter-12 Row; 30" Spacings; CycloAir; Frame In Good Shape; Hydraulic Fold; Markers; Paint Fair; Tires Fair; Boxes Appear Good; Hoses And Hydraulics Appear Good; Does Not Appear To Have Any Breaks Or Welds. SN:015308 • Peck Auger-Swing Hopper; 8" Tubing; 71’ Long; Auger In Good Shape; Undercarriage Good; Tires Fair To Good; Swing Hopper Auger Good Shape; Some Welds On Outside; Hoses Appear Good; Front Jack Stand; Overall A Good Peck Auger; SN:4948556 • Case IH 1044 Cornhead-4 Row; 38" Spacings; 1987 Model; Frame In Fair To Good Shape; Snoots Good Shape; Bonnets Good Shape; Normal Wear And Tear Dents; Paint Fair To Good-Normal Fading; Knives Appear Good; Ear And Corn Savers; Chains And Sprockets Appear Good; SN:03045 • Case IH 1054 Cornhead-5-Row; 36" Spacings; 1998 Model; Frame In Good Shape; Floor In Good Shape; All Snoots In Good Shape; All Bonnets In Good Shape; One Weld On Right Side; Ear And Corn Savers Good Shape; Auger Appears in Good Shape; Chains And Sprockets Good; Dual Lights; Paint Good-Normal Wear And Some Minor Fading; Knives Appear Good; SN:0243895
• Chevy Fuel Truck-C-6500; 5-Speed High/Low Manual Transmission; 396 Long Block With Less Than 10,000 Miles; Bench Seat; AM/FM Radio; Heater; Roll Up Window; Rear 5.5 HP Briggs And Stratton Motor; 2" Banjo Pump; 10R22.5 Rear And Front Tires-Good Shape-Good Tread; 1600 Tank; Rear Hitch; Rear Fenders; 25’ Hose-High Flow Nozzle; Interior Clean; Used On Local Farm For Years; Starts And Runs Good; Location: Albion, Nebraska; Owner: Jim Meisenburg- 402.741.1387 • International 490 Disk-24’ Long; Frame In Good Shape; Appears To Have No Breaks Or Welds; Rear Blades Measure Approx 18.5"; Front Blades Measure Approx. 17.5"; 7" Spacings; Tires Fair-Some Cracking; Heavy Duty And Good Looking Disc; Location: David City, Nebraska Owner: Bill Juranek- 402.641.7835
All Items Located At Michael Wegener Implement In Cornlea ,Nebraska
• Rowse Hay Inverter-Frame In Good Shape; Belts And Fingers Good Shape; Hoses Appear Good; Hydraulics Good; Paint Good Shape; Was Used Last Season; Appears To Have No Breaks Or Welds; Heavy Duty Frame; Owner: Al Hocheder - 970.768.0233 • Brady Running Gear-Auto-Steer; 14’ Long; 6-Bolt Rims; 8.5L-14 Tires-Fair To Good; Frame Good Shape-Normal Surface Rust; No Breaks; Some Added Holes For Box Support; Owner: Bill Juranek - 402.641.7835
ALL ITEMS LOCATED AT VICTORS EQUIPMENT IN FREMONT NEBRASKA OWNER-BRAD- 402-727-4200
NO Buyer’s Premiums
For more information, call Cornlea
• John Deere 643 Cornhead-High-Tin; Frame Fair-Welds On Rear; Snoots In Fair To Good Shape; Paint Fair; Normal Wear On Paint And Tin; Chains And Sprockets Appear Good. • Bobcat Asphalt Grinder-7’ Total Length; 16" High Flow Surface Planer Length; Frame In Good Shape; Teeth Appear In Good Shape; Normal Wear And Tear; Worked Great Last Time Used; Hoses Appear Good; Adjustable Angle; Fits Most Makes And Models Of Bobcat. • Ariens Lawn Mower-Model #1944; Zero-Turn Model; 44" Mowing Deck; Kohler Engine; Frame In Good Shape; No Breaks; Exterior Good; Paint Good; Tires Good Shape Good Tread; Seat Good; Handles Appear Straight; Appears To Have No Breaks Or Welds Anywhere-Deck Has Some Normal Scratches And Wear; Knives Appear Good; Used Very Little; Always Stored In Shed; Starts And Runs Good; Overall A Nice Ariens Lawn Mower; HRS:514 • Case IH 1083 Cornhead-1990 Model; Frame In Good Shape; Floor In Good Shape; Auger Appears On Good Shape; Right Snoot And Bonnet Missing; Some Bonnets And Snoots Are Loose And Missing; Knives Appear Good; Not All Tin Is Present; Dual Lights; Remaining Snoots Are Good Shape; Bonnets Good Shape; Normal Wear; SN: 0071710 • Case IH 1044 Cornhead-4 Row; 36" Spacings; 1986 Model; Frame in Good Shape; Floor In Good Shape; Auger Appears In Good Shape; Right Hand Snoot Missing; Remaining Snoots In Good Shape; Bonnets In Good Shape; Knives Appear Good; Ear And Corn Savers; Chains And Sprockets In Good Shape; Feeder House Has Some Normal Wear And Dents; Overall A Good Straight 1044; SN:000836 • Case IH 1054 Cornhead-1987 Model; 5 Row; 36" Spacings; Frame Good Shape; Auger In Good Shape; Floor In Good Shape; Right Poly Snoot; Missing One Middle Snoot; Right Snoot Has Damage; Other Snoots In Good Shape; Bonnets Appear In Good Shape; Corn And Ear Savers; Knives Appear Good; Chains And Sprockets Appear Good; SN:003008 • Case IH 1083 Cornhead-1990 Model; 8-Row; 30" Spacings; Frame In Good Shape; Floor Appears in Good Shape; Auger In Good Shape; Missing Left Snoot And Bonnet; Some Poly Snoots-Good Shape; Rest Of Snoot Fair To Good; Bonnets Appear in Good Shape; Feeder House Has Some Dents; Knives Appear Good; Some Sprockets May Need Replaced; Tinwork Fair;SN:0072035
• Running Gear 7’ Long-6-Bolt Rims; 9.5L-15Sl Tires-Fair; Frame In Good Shape; No Major Breaks; Some Cutting From Gravity Box; Appears Two Different Running Gears Made Into One. Owner: Bill Juranek - 402.641.7835 • Great Bend 651 Backhoe-Tractor Mounted; 180 Degree Rotation; Up And Down Stabilizer Spread; 2-Lever Action; Frame in Good Shape; Hoses Appear In Good Shape; Bucket Good Shape; Seat Minor Cuts; Appears To Have No Breaks Or Repairs; Overall A Good Shaped 651 Backhoe. Owner: Al Hocheder - 970.768.0233 • A.C. Synchronous Generator-230/115 Volt; 87/174 Amp; 20 KW; Frame In Good Shape; Paint Good; Good Shape; Runs Good. Gaoyou Electric Factory. Owner: Randy Zima - 402.624.6365 • Brand New Cattle Chute-Hydraulic; Frame Good; Paint Good; Hoses And Hydraulics Good; Heavy Duty Bracings And Panels; No Rust; No Breaks; Owner: Rob Howell - 402.640.0248 • 7-Bar x 20’ Continuous Panel-Set Of (2)-10 Panels In Bundle; Panel Is Made Of 1 1/4″ × 14 Gauge Round Tubing. Five Uprights Per Panel. Uprights Are Also Made Of 1 1/4″ × 14 Gauge Tubing; Panel Is 55 1/4" Tall And 20’ Long. Pipes Are On 9" Center. Brand New Panels, Straight, Never Used. Clips And Connectors Are Included; Owner: Rob Howell - 402.640.0248 • Set Of 10 Portable Panels-6-Bar x 10’ Coral Panel. Panel Is Made Of 1 1/4″ × 14 Gauge Round Tubing; 5’ Tall x 10’ Long; Connect Together With Pins Held In Place By Washers; Coral Panels Easy To Connect And Are Very Well Made; 80 LBS Per Panel. Never Used, Brand New; Straight; Owner: Rob Howell - 402.640.0248 • IHC 10-Bolt Hubs-(2) Sets Of (2); Bolts Good; Casting Good; No Breaks; No Welds; No Repairs; No Major RustNormal Rusty Color; Couple Bolts Missing; Overall A Good Set Of Hubs. Owner: Randy Zima- 402.624.6365 • 500 Gallon Fuel Trailer-Poly Tank-510 Gallon Max; Kuker Trailer Gear; Rear Jacks Stands; 8-Bolt Rims; Tires-Good Shape; Rear Hitch; Fuel Pump And Nozzle; Manual And Automatic Shut-Off; Tank Good; Owner: Al Hocheder - 970.768.0233 • (60)- 6 Bar 20 Foot Continuous Panel-Set Of 10 Panels In 1 Bundle; Panel Is Made Of 1 1/4″ × 14 Gauge Tubing. 1 1/4″ × 14 Gauge Tubing. 46 1/4" Tall x 20’ Long; Pipes Are On 9" Centers; Brand New Panel; Straight Never Used; Newer Heavy Duty Bar Bracing. Clips And Connectors Are Included. Owner: Rob Howell - 402.640.0248 • Easy-Kleen Pressure Washer-Brand New; Magnum Gold Model; Never Used; 3.6 GPM; 4000PSI Adjustable Pressure; 15HP Electric Start Engine; 120 Volt Burner System; Diesel Fired Burner; 30’ HP Hose; Comes With Gun; Wand; 4 Nozzles; Soap System; Manual; Has Been Covered And Stored Inside; Does NOT Have A Warranty. • Pair Of (2) Orthman Lift Assists Wheels-Model #601-342; Frame In Good Shape; Price 3000 PSI Hydraulic Cylinders; Tires-Goodyear-Good Shape; Some Surface Rust; Appears To Have No Breaks; Some Welds; Hoses Appear Good; Owner: Al Hocheder - 970.768.0233 • John Deere 10-Bolt Hubs-Set Of (2); Bolts Good; Casting Good; No Breaks; No Welds; No Repairs; No Major RustNormal Rusty Color; Some Normal Paint Loss And Scratches; Owner: Randy Zima - 402.624.6365 • (3) Sets Of (2) Driver Rims-John Deere; Brand New; 16×46″ Rims; 12 Hole; No Breaks; No Welds; No Repairs; Paint Good; Never Taken Out Of Original Banding; Overall A Very Nice Brand New Set Of Rims. Owner: Randy Zima402.624.6365 • Bush Hog Disc-22’; Double Fold; 9" Spacings; Front Discs Measure Approx 19.5"; Rear Discs Measure Approx 20"; Dual Case IH 3000 Hydraulics; Hydraulic Hoses Good Shape; Some Welds; Tires Fair To Good; Was Stored Inside For Years; Worked Great Last Season; Owner: Jim Kennedy 402.649.5309
*Additional Items Cont’d on Back*
NO Reserves
Iron or visit WWW.CORNLEAIRON.COM
Jared Wiehn • Cell: 402.920.1689 Office: 402.923.0511 • Toll Free: 888.923.0511 • Email: [email protected]
