Vacuum Components Catalog
HIGH VACUUM GREASE Orelube G1/3
02 03
HIGH VACUUM GREASE
04
Features This light gray semi-transparent solid grease is formed by mixing highly refined dimethyl silicone oil with fine silica powder as a thickener. It has exceptional lubrication properties, sealing characteristics, water resistance, chemical inertness, thermal resistance, cold tolerance and oxidation resistivity.
05 10 11
Typical Properties Exterior Consistency (unworked) Worked, 60 strokes Specific gravity (25℃) Oil separation (%, 200℃/24hrs) Loss on heating (%, 200℃/24hrs)
Light gray 210 245 1.0 0.5 1.0
12 13 20
Orelube G1/3
21
Features
22
Orelube G1/3 is formed by mixing highly refined paraffin base oil with synthetic molybdenum. This non-melt grease provides excellent anti-wear properties at high temperatures.
23 24 30
Properties NLGI Consistency (Worked, 60 W) Thickener hue Exterior Dropping point Suitable operating temperature range Kinetic viscosity of base mineral oil (cSt) Oxidative stability test ([email protected]℃,psi loss) Evaporation (22hrs.@178℃,%wt.loss) Copper strip corrosion test (24hrs.@100℃) Water washout test (% wt.loss @79.4℃) Four-ball wear-test (1200rpm, 40kg, 75℃, 1hr scar diameter, mm) Four-ball extreme-pressure test (Weld load, kg) (load wear index, kg) Timken extreme-pressure test (OK load, lbs) Oil separation test (24hrs.@25℃,%.loss)
ASTM (American Society for Testing and Materials)
31
No.2 (No.1~3 applicable) 270 ASTM D-217 Non-soap thickener (Organoclay) Gold Buttery none ASTM D-2265 -23°C~180°C @40°C 113 ASTM D-445 @100°C 12.1 3 ASTM D-942 3 ASTM D-2595 1a ASTM D-130 3.1 ASTM D-1264 0.49 ASTM D-2266 200 ASTM D-2596 35 30 ASTM D-2509 2.3 ASTM D-1742
32 40 50 52 60 70 90 135
Vacuum Pump Oil/ Grease
Grease Specifically Made for Vacuum Equipment
01
ULVAC TECHNO, Ltd.
Vacuum Pump Oil/Grease
02 03
HIGH VACUUM GREASE
04
Features This light gray semi-transparent solid grease is formed by mixing highly refined dimethyl silicone oil with fine silica powder as a thickener. It has exceptional lubrication properties, sealing characteristics, water resistance, chemical inertness, thermal resistance, cold tolerance and oxidation resistivity.
05 10 11
Typical Properties Exterior Consistency (unworked) Worked, 60 strokes Specific gravity (25℃) Oil separation (%, 200℃/24hrs) Loss on heating (%, 200℃/24hrs)
Light gray 210 245 1.0 0.5 1.0
12 13 20
Orelube G1/3
21
Features
22
Orelube G1/3 is formed by mixing highly refined paraffin base oil with synthetic molybdenum. This non-melt grease provides excellent anti-wear properties at high temperatures.
23 24 30
Properties NLGI Consistency (Worked, 60 W) Thickener hue Exterior Dropping point Suitable operating temperature range Kinetic viscosity of base mineral oil (cSt) Oxidative stability test ([email protected]℃,psi loss) Evaporation (22hrs.@178℃,%wt.loss) Copper strip corrosion test (24hrs.@100℃) Water washout test (% wt.loss @79.4℃) Four-ball wear-test (1200rpm, 40kg, 75℃, 1hr scar diameter, mm) Four-ball extreme-pressure test (Weld load, kg) (load wear index, kg) Timken extreme-pressure test (OK load, lbs) Oil separation test (24hrs.@25℃,%.loss)
ASTM (American Society for Testing and Materials)
31
No.2 (No.1~3 applicable) 270 ASTM D-217 Non-soap thickener (Organoclay) Gold Buttery none ASTM D-2265 -23°C~180°C @40°C 113 ASTM D-445 @100°C 12.1 3 ASTM D-942 3 ASTM D-2595 1a ASTM D-130 3.1 ASTM D-1264 0.49 ASTM D-2266 200 ASTM D-2596 35 30 ASTM D-2509 2.3 ASTM D-1742
32 40 50 52 60 70 90 135
Vacuum Pump Oil/ Grease
Grease Specifically Made for Vacuum Equipment
01
ULVAC TECHNO, Ltd.
Vacuum Pump Oil/Grease
