Zoomer Jurassic World Indominus Rex Tail Tip Replacement

Report 5 Downloads 37 Views
Zoomer Jurassic World Indominus Rex Tail Tip Replacement

Zoomer Jurassic World Indominus Rex Tail Tip Replacement A quick guide to replace the tip of the Zoomer Jurassic World Indominus Rex's Tail

Written By: Luke Selby

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Zoomer Jurassic World Indominus Rex Tail Tip Replacement

INTRODUCTION The mighty Indominus Rex, like any predator, has his own weaknesses. This time, the tip of his tail has broken! Let's get to work.

TOOLS: Phillips #1 Screwdriver (1) Heavy-Duty Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Zoomer Jurassic World Indominus Rex Tail Tip Replacement

Step 1 — Tail Tip

 Lay the toy on its back in order to have direct access to the screw holding the tail together. 

Remove the 9.4mm phillips screw from the tip of the tail.

Step 2



Use a spudger to pry apart the pieces of the tail, and gently remove the two pieces of the tip for replacement.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Zoomer Jurassic World Indominus Rex Tail Tip Replacement This document was last generated on 2017-06-24 10:53:38 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4