Elvacite® 2927 Acrylic Resin - Lucite International
Elvacite® 2927 Acrylic Resin Acrylic Resin Elvacite® 2927 is a methyl methacrylate copolymer designed for use in VOC compliant coatings. Elvacite® 2927 utilizes controlled molecular architecture technology to provide lower viscosity at higher concentrations.
Performance Features and Key Benefits
Higher solids capability than comparable, traditional acrylic resins Lower viscosities capability Good mechanical properties Low odor
Typical Properties & Manufacturers Release Specifications Typical Propertiesa of Elvacite® 2927 Appearance
Solid bead
Glass Transition Temp, onset
50°C
Molecular Weight (Mw)
19,000
Acid Number
6.5
a) Typical physical properties listed are approximate values and should not be considered manufacturers release specifications. Manufacturers release specifications are subject to change without notice, please contact your Lucite International Representative for the latest product specification details.
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 1
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Elvacite® 2927 Manufacturers Release Specificationsb Inherent Viscosityc
0.10-0.13
% Moisture (max)
0.65
% Methacrylic Acid
0.75 – 1.25
b) c)
Manufacturers release specifications are subject to change without notice. Please contact Lucite International, Inc. for the latest information. Inherent viscosity of a solution containing 0.25 g polymer in 50 ml of methylene chloride measured at 20°C using a No. 50 Cannon-Fenske viscometer
Preparing Solutions Elvacite® resins dissolve at room temperature but require constant agitation to prevent solvent-swollen granules of polymer from forming agglomerates and sticking to the walls of the vessel. Important: The polymer beads should be sifted directly into the vortex of the stirred solvent to speed wetting-out and dispersion. Continuous lowshear agitation for periods of 1-12 hours, depending on the grade and concentration of resin, is recommended. After the solution appears clear in the tank, a sample should be spread out on a Leneta card or glass. After the solvent evaporates and a film forms on the card or glass, there should not be any resin seeds. If there are any seeds, the tank should be agitated further to fully dissolve the resin. Tank agitation should not be stopped (except for sampling) until the film test indicates there are no resin seeds. Any cloudiness or residue may indicate that some polymer remains undissolved. The presence of water in the system can also cause cloudiness. Solution time can be reduced by heating; most common solvents can be heated to approximately 49°C (120°F) without the need for reflux equipment. High-shear agitation also cuts dissolving time, but requires care to avoid overheating and excessive solvent loss.
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 2
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Solvent Solubility Table depicts the solubility of Elvacite® 2927 at 30% solids in various solvents.
Solubility of Elvacite® 2927 Solvent Toluene Acetone Methyl ethyl ketone Dimethyl carbonate Methyl isobutyl ketone n-Butyl acetate t-Butyl acetate Ethyl acetate n-Propyl acetate Methyl acetate Low odor mineral spirits
Solubility S S S S S S S S S S I
Rating C C C C C C C C C C -
(S = Soluble, H = Cloudy/hazy solution, C= Clear solution, I = Insoluble)
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 3
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Viscosity and Gloss The table below illustrates the high solids / reduced solution viscosity effects of the technology. Elvacite® 2016 is a standard thermoplastic acrylic resin used in solvent based coatings, while Elvacite® 2927 is prepared with the new controlled molecular architecture technology.
Solvent
Toluene
Xylene
Acetone
Methyl ethyl ketone
n-Butyl acetate:Propan-2-ol 75:25 %v/v n-Butyl acetate:Propan-2-ol 50:50 %v/v n-Butyl acetate:Propan-2-ol 25:75 %v/v
Technical Data Sheet
Resin Conc. BROOKFIELD VISCOSITY (%w/w) at 21°C (cP)
40 60 65 40 60 65 40 60 65 40 60 65 40 60 40 60 40 60
Elvacite® 2016 470 156000 Not measured 740 234000 Not measured 262 54000 Not measured 194 55500 Not measured 918 384000 2100 580000 6850 970000
Elvacite® 2927 v20140725
Elvacite® 2927 78 5130 24100 96 7850 35400 23 840 3150 33 1050 4810 78 5430 101 13100 191 22200
Page: 4
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
COMPLIANCE WITH FDA REGULATIONS Lucite International confirms that Elvacite® 2927 complies with the compositional requirements of the following United States of America’s Food and Drug Administration (FDA) regulations. 1. FDA 21 CFR 175.105 for adhesives used as components of articles intended for use in the packaging, transporting, or holding food. 2. FDA 21 CFR 175.300 in resinous and polymeric coatings used as the food contact surface of articles intended for use in producing, packing, processing, preparing, treating, packaging, transporting, or holding food. The coating in its finished form in which it is to contact food is subject to a restriction on its chloroform soluble extractives. Compliance with the limitation on extractives can only be demonstrated by tests carried out in the final article. 3. FDA 21 CFR 175.320 in resinous and polymeric coatings for polyolefin films, provided it is intended for repeated food contact use as specified in FDA 21 CFR 175.300(a). The coating in its finished form in which it is to contact food is subject to a restriction on its chloroform soluble extractives. Compliance with the limitation on extractives can only be demonstrated by tests carried out in the final article. 4. FDA CFR 176.170 as a component of the uncoated or coated food contact surface of paper and paperboard intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting or holding aqueous and fatty foods. 5. FDA 21 CFR 176.180 as a component of the uncoated or coated food contact surface of paper and paperboard intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding dry food. 6. FDA 21 CFR 177.1010 as semi-rigid and rigid acrylic plastics articles intended for use in contact with food. This product is limited to use only in plastic articles intended for repeated use in contact with food. The semi-rigid and rigid acrylic plastics in the finished form in which they are to contact food are subject to limitation on extractives. Compliance with the limitation on extractives can only be demonstrated by tests carried out on the final article. This statement of compliance is correct at the date of issue. As food contact regulations and product formulations are subject to change, it is the user’s responsibility to ensure that they are in possession of a current statement of compliance. Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Date of Issue: February 2009
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 5
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Lucite International Inc. The Lucite Center 7275 Goodlett Farms Parkway Cordova, TN 38016 USA T: +1 (901) 381 2000 www.luciteinternational.com/resins Lucite International Specialty Polymers and Resins Ltd Horndale Avenue Newton Aycliffe DL5 6YE United Kingdom T: +44 (0) 1325 300990 F: +44 (0) 1325 314925 www.luciteinternational.com/resins
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 6
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Performance Features and Key Benefits
Higher solids capability than comparable, traditional acrylic resins Lower viscosities capability Good mechanical properties Low odor
Typical Properties & Manufacturers Release Specifications Typical Propertiesa of Elvacite® 2927 Appearance
Solid bead
Glass Transition Temp, onset
50°C
Molecular Weight (Mw)
19,000
Acid Number
6.5
a) Typical physical properties listed are approximate values and should not be considered manufacturers release specifications. Manufacturers release specifications are subject to change without notice, please contact your Lucite International Representative for the latest product specification details.
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 1
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Elvacite® 2927 Manufacturers Release Specificationsb Inherent Viscosityc
0.10-0.13
% Moisture (max)
0.65
% Methacrylic Acid
0.75 – 1.25
b) c)
Manufacturers release specifications are subject to change without notice. Please contact Lucite International, Inc. for the latest information. Inherent viscosity of a solution containing 0.25 g polymer in 50 ml of methylene chloride measured at 20°C using a No. 50 Cannon-Fenske viscometer
Preparing Solutions Elvacite® resins dissolve at room temperature but require constant agitation to prevent solvent-swollen granules of polymer from forming agglomerates and sticking to the walls of the vessel. Important: The polymer beads should be sifted directly into the vortex of the stirred solvent to speed wetting-out and dispersion. Continuous lowshear agitation for periods of 1-12 hours, depending on the grade and concentration of resin, is recommended. After the solution appears clear in the tank, a sample should be spread out on a Leneta card or glass. After the solvent evaporates and a film forms on the card or glass, there should not be any resin seeds. If there are any seeds, the tank should be agitated further to fully dissolve the resin. Tank agitation should not be stopped (except for sampling) until the film test indicates there are no resin seeds. Any cloudiness or residue may indicate that some polymer remains undissolved. The presence of water in the system can also cause cloudiness. Solution time can be reduced by heating; most common solvents can be heated to approximately 49°C (120°F) without the need for reflux equipment. High-shear agitation also cuts dissolving time, but requires care to avoid overheating and excessive solvent loss.
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 2
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Solvent Solubility Table depicts the solubility of Elvacite® 2927 at 30% solids in various solvents.
Solubility of Elvacite® 2927 Solvent Toluene Acetone Methyl ethyl ketone Dimethyl carbonate Methyl isobutyl ketone n-Butyl acetate t-Butyl acetate Ethyl acetate n-Propyl acetate Methyl acetate Low odor mineral spirits
Solubility S S S S S S S S S S I
Rating C C C C C C C C C C -
(S = Soluble, H = Cloudy/hazy solution, C= Clear solution, I = Insoluble)
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 3
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Viscosity and Gloss The table below illustrates the high solids / reduced solution viscosity effects of the technology. Elvacite® 2016 is a standard thermoplastic acrylic resin used in solvent based coatings, while Elvacite® 2927 is prepared with the new controlled molecular architecture technology.
Solvent
Toluene
Xylene
Acetone
Methyl ethyl ketone
n-Butyl acetate:Propan-2-ol 75:25 %v/v n-Butyl acetate:Propan-2-ol 50:50 %v/v n-Butyl acetate:Propan-2-ol 25:75 %v/v
Technical Data Sheet
Resin Conc. BROOKFIELD VISCOSITY (%w/w) at 21°C (cP)
40 60 65 40 60 65 40 60 65 40 60 65 40 60 40 60 40 60
Elvacite® 2016 470 156000 Not measured 740 234000 Not measured 262 54000 Not measured 194 55500 Not measured 918 384000 2100 580000 6850 970000
Elvacite® 2927 v20140725
Elvacite® 2927 78 5130 24100 96 7850 35400 23 840 3150 33 1050 4810 78 5430 101 13100 191 22200
Page: 4
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
COMPLIANCE WITH FDA REGULATIONS Lucite International confirms that Elvacite® 2927 complies with the compositional requirements of the following United States of America’s Food and Drug Administration (FDA) regulations. 1. FDA 21 CFR 175.105 for adhesives used as components of articles intended for use in the packaging, transporting, or holding food. 2. FDA 21 CFR 175.300 in resinous and polymeric coatings used as the food contact surface of articles intended for use in producing, packing, processing, preparing, treating, packaging, transporting, or holding food. The coating in its finished form in which it is to contact food is subject to a restriction on its chloroform soluble extractives. Compliance with the limitation on extractives can only be demonstrated by tests carried out in the final article. 3. FDA 21 CFR 175.320 in resinous and polymeric coatings for polyolefin films, provided it is intended for repeated food contact use as specified in FDA 21 CFR 175.300(a). The coating in its finished form in which it is to contact food is subject to a restriction on its chloroform soluble extractives. Compliance with the limitation on extractives can only be demonstrated by tests carried out in the final article. 4. FDA CFR 176.170 as a component of the uncoated or coated food contact surface of paper and paperboard intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting or holding aqueous and fatty foods. 5. FDA 21 CFR 176.180 as a component of the uncoated or coated food contact surface of paper and paperboard intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding dry food. 6. FDA 21 CFR 177.1010 as semi-rigid and rigid acrylic plastics articles intended for use in contact with food. This product is limited to use only in plastic articles intended for repeated use in contact with food. The semi-rigid and rigid acrylic plastics in the finished form in which they are to contact food are subject to limitation on extractives. Compliance with the limitation on extractives can only be demonstrated by tests carried out on the final article. This statement of compliance is correct at the date of issue. As food contact regulations and product formulations are subject to change, it is the user’s responsibility to ensure that they are in possession of a current statement of compliance. Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Date of Issue: February 2009
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 5
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Lucite International Inc. The Lucite Center 7275 Goodlett Farms Parkway Cordova, TN 38016 USA T: +1 (901) 381 2000 www.luciteinternational.com/resins Lucite International Specialty Polymers and Resins Ltd Horndale Avenue Newton Aycliffe DL5 6YE United Kingdom T: +44 (0) 1325 300990 F: +44 (0) 1325 314925 www.luciteinternational.com/resins
Technical Data Sheet
Elvacite® 2927 v20140725
Page: 6
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed. Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
