FASTrak LWD Service Acquires Downhole Samples in Challenging Well
Case History
FASTrak LWD Service Acquires Downhole Samples in Challenging Well Increased reservoir knowledge in Trinidad and Tobago lower reservoir
Benefits
Increased reservoir knowledge through real-time analysis of downhole fluid properties
Acquired fluid samples immediately after drilling, minimizing mud filtrate invasion and pump-out time
Provided accurate pressure testing
Background and challenges
Determine the presence of gas condensate in deepest part of reservoir
Perform real-time downhole fluid analysis, collect samples, and gather formation pressure and mobility data
Baker Hughes solution and results
FASTrak LWD service
SmartPad™ closed-loop sealing system
SmarTest™ intelligent testing system
Successfully performed pressure testing, real-time fluid analysis, and collection of single-phase samples
Increased reservoir knowledge for enhanced drilling efficiency and safety
BP Trinidad and Tobago needed to acquire samples from the deepest part of a reservoir to determine the presence of gas condensate. Analyses from existing fluid samples taken from the upper reservoir, using a competitor’s wireline formation testing tool, suggested a very dry gas accumulation. Samples from the reservoir’s lower section would enable multiphase meters to be accurately calibrated should liquids be present. The Baker Hughes FASTrak™ LWD fluid analysis sampling and testing service conducted the operation, using the Baker Hughes SmartPad™ closed-loop sealing system and the Baker Hughes
James DeLeon, Andre Gutgold, and Dave Taylor holding the first Single Phase Tank that was filled downhole using the FASTrak LWD service.
SmarTest™ intelligent testing system. Together, these systems enabled successful pressure testing and real-time fluid analysis and facilitated the recovery of three samples from the lower reservoir. By enabling full formation testing in all deviated and horizontal wells, including extended-reach and deepwater wells, the FASTrak LWD service provided BP with a safe, cost-effective alternative to wireline that can be used in even the most challenging test environment. The service also provides an enhanced understanding of reservoirs once considered too risky or costly to test.
www.bakerhughes.com Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
© 2012 Baker Hughes Incorporated. All rights reserved. 36009 REV. 04/2013
FASTrak LWD Service Acquires Downhole Samples in Challenging Well Increased reservoir knowledge in Trinidad and Tobago lower reservoir
Benefits
Increased reservoir knowledge through real-time analysis of downhole fluid properties
Acquired fluid samples immediately after drilling, minimizing mud filtrate invasion and pump-out time
Provided accurate pressure testing
Background and challenges
Determine the presence of gas condensate in deepest part of reservoir
Perform real-time downhole fluid analysis, collect samples, and gather formation pressure and mobility data
Baker Hughes solution and results
FASTrak LWD service
SmartPad™ closed-loop sealing system
SmarTest™ intelligent testing system
Successfully performed pressure testing, real-time fluid analysis, and collection of single-phase samples
Increased reservoir knowledge for enhanced drilling efficiency and safety
BP Trinidad and Tobago needed to acquire samples from the deepest part of a reservoir to determine the presence of gas condensate. Analyses from existing fluid samples taken from the upper reservoir, using a competitor’s wireline formation testing tool, suggested a very dry gas accumulation. Samples from the reservoir’s lower section would enable multiphase meters to be accurately calibrated should liquids be present. The Baker Hughes FASTrak™ LWD fluid analysis sampling and testing service conducted the operation, using the Baker Hughes SmartPad™ closed-loop sealing system and the Baker Hughes
James DeLeon, Andre Gutgold, and Dave Taylor holding the first Single Phase Tank that was filled downhole using the FASTrak LWD service.
SmarTest™ intelligent testing system. Together, these systems enabled successful pressure testing and real-time fluid analysis and facilitated the recovery of three samples from the lower reservoir. By enabling full formation testing in all deviated and horizontal wells, including extended-reach and deepwater wells, the FASTrak LWD service provided BP with a safe, cost-effective alternative to wireline that can be used in even the most challenging test environment. The service also provides an enhanced understanding of reservoirs once considered too risky or costly to test.
www.bakerhughes.com Disclaimer of Liability: This information is provided for general information purposes only and is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do not make any warranties or representations of any kind regarding the information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of the information provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
© 2012 Baker Hughes Incorporated. All rights reserved. 36009 REV. 04/2013
