Gateway 600YG2 Keyboard Replacement

Gateway 600YG2 Keyboard Replacement

Gateway 600YG2 Keyboard Replacement Removal of keyboard

Written By: Elizabeth Mazer

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Gateway 600YG2 Keyboard Replacement

INTRODUCTION How to remove keyboard.

TOOLS: Phillips #0 Screwdriver (1) Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Gateway 600YG2 Keyboard Replacement

Step 1 — Battery 

Flip the laptop over. Slide the battery release tab to the right.



Lift the battery out.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Gateway 600YG2 Keyboard Replacement

Step 3 — Power button panel 

Insert spudger between sysrq and ins keys.



Gently lift power button panel from the right to left.



Remove the 5 screws holding the keyboard in place.

Step 4 — Keyboard

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Gateway 600YG2 Keyboard Replacement

Step 5

 CAUTION: When lifting the keyboard out, do not lift keyboard up. Only fold back along the space bar edge.

 DO NOT PULL the black cable by the ribbon section; only pull it by the connector itself. 

Follow the black ribbon cable to the connector and gently pull straight up.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-02 01:49:31 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5