GE Outdoor Area Wall Lighting Versaflood II Wallighter ... - Villa Lighting
GE Lighting Solutions
Area Lighting Wallighter® 175 (W1LR, W1SR, W1LG & W1SG)
imagination at work
Product Features For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances, walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
Unique Features
• •
• • • • • •
Building perimeters, entrances, walkways and residential yards Loading docks and many other wall mounted area lighting applications
Housing • Two-piece die-cast aluminum housing
Rating •
/
1598 Listed Suitable for Wet Locations
Reflectors • Acrylic refractor or vandal-resistant polycarbonate refractor
Mogul (E39 standard) or medium base (E26 standard) sockets Standard and tamper resistant hardware included Thru-feed conduit entrance on side with built-in conduit clamps Front access to ballast when mounted Field installed Internal Glare Shield (IGS-WL175) available Magnapack packaging available
Ordering Number Logic Wallighter® 175 (W1LR, W1SR, W1LG & W1SG)
____ - __ - _ _ - _ _ _ - ___ - DB __ Light Source
Prod. ID
wattage
W1LR = Wallighter 175 (Mogul Base E39 Socket Standard without Lamp)
See Ballast and See Ballast and See Ballast and Photometric Photometric Photometric Selection Table Selection Table Selection Table
W1SR = Wallighter 175 (Medium Base E26 Socket Standard with Lamp) W1LG = Wallighter 175 (Mogul Base E39 without Lamp with Internal Glare Shield) W1SG = Wallighter 175 (Medium Base E26 with Lamp and Internal Glare Shield)
05 = 50 07 = 70 10 = 100 15 = 150 (55V)
E = Energy Act Compliant Pulse MH (EPMH) M = MH P = PMH S = HPS
Voltage
60Hz 0 = 120/208/ 240/277 Multivolt 1 = 120 2 = 208 3 = 240 4 = 277 5 = 480 C = 120x240x 277 (150W PMH only) D = 347 F = 120X347 T = 220
ballast type selection See Ballast and Photometric Selection Table
PE Function
Lens Type
1 = None For PE Kit, see Accessories 3 = Internal PE control*
A = Acrylic L = Polycarbonate*
A = Autoreg G = Mag-Reg with Grounded * Not available Socket Shell with multivolt H = HPF or 480V Reactor or Lag K = Hot Restart M = Mag-Reg N = NPF Reactor or Lag
* Not for car wash applications
IES Distribution type See Ballast and Photometric Selection Table
-
_ OPTIONs
color DB = Dark Bronze
SN2 = Short Non-cutoff Type II SN3 = Short Non-cutoff Type III
B = Time Delay Switched (Drop Lens only) F = Fusing (Not available with multivolt or dual voltage)
SN4 = Short Non-cutoff Type IV SS3 = Short Semi-cutoff Type III SS4 = Short Semi-cutoff Type IV MN4 = Medium Noncutoff Type IV
50Hz 6 = 220 Y = 240
Ballast and Photometric Selection Table All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
Ballast Type/Voltage
60Hz 50Hz Light Wattage Source Multivolt 120 208 240 277 480 347, 120X347 220 220 240 W1LR Mogul Base Without Lamp 50 HPS H H, K, N H H 70, 100, 150(55V) HPS H, K G,H,K,M G,H,M G,H,M 175 MH A A A A 175 MH A A A A (Coated) W1SR MEDIUM BASE WITH LAMP 70, 100, 150(55V) HPS H, N H, N N/A N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A (Coated) 175 MH N/A N/A N/A N/A 175 MH N/A N/A N/A N/A (Coated) W1LG mogul base without lamp with internal glare shield 50 HPS H H, K, N H H 70, 100, 150(55V) HPS H G,H,K,M G,H,M G,H,M 175 MH N/A N/A N/A N/A (Coated) W1SG medium base with lamp with internal glare shield 70, 100, 150(55V) HPS H, N H, N N/A N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A (Coated) 175 MH N/A N/A N/A N/A 175 MH N/A N/A N/A N/A (Coated)
H G,H,M A A
N/A G,M A A
Acrylic
Polycarbonate
IES Photometric Distribution Curve Number Type 35-
IES Photometric Distribution Number Type 35-
H H A A
H N/A A A
H H,M A A
N/A H A A
SN4 SN4 SN4 SN4
178047 178047 178051 178049
SN4 SN4 SN4 SN4
178046 178046 178050 178048
H, N H H, N, A H, N H, N, A H, N
H, N H, N H, N
N/A N/A N/A
H,M N/A N/A
H N/A N/A
SN3 SN2 SN2
178053 178055 178057
SN3 SN2 SN2
178052 178054 178056
N/A N/A
N/A N/A
A A
A A
A A
A A
SN2 SN2
178055 178057
SN2 SN2
178054 178056
H H G,H,M G,M N/A N/A
H H A
H N/A A
H H,M A
N/A H A
C/F C/F C/F
C/F C/F C/F
SN4 SN4 SS4
178476 178476 178478
H, N H H, N, A H, N H, N, A H, N
H, N H, N H, N
N/A N/A N/A
H,M N/A N/A
H N/A N/A
C/F SN3 SN4
C/F 179122 179125
SS3 C/F C/F
178479 C/F C/F
N/A N/A
A A
A A
A A
A A
SN3 SS3
450685 450686
C/F C/F
C/F C/F
N/A N/A
NOTE: N/A = Not available. C/F = Contact Manufacturer *150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V **150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V
Product Dimensions KNOCKOUT FOR .75 in. (19 mm) CONDUIT
CRADLE FOR .75 in. (19 mm) CONDUIT
.686 in. (17 mm) DIA KNOCKOUT FOR PE KIT ASSEMBLY
4.000 in. (102 mm)
7.750 in. (197 mm)
.358 in. (9 mm) DIA KNOCKOUT (4 PLACES) .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH 4.000 in. (102 mm) OCTAGON BOX (4 PLACES) 4.375 in. 1.375 in. (35 mm) MAX (111 mm) .625 in. (16 mm) MIN 6.344 in. (161 mm)
2.875 in. (73 mm)
12.875 in. (327 mm)
.150 in. (4 mm) .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH 3.250 in. (83 mm) OCTAGON BOX (4 PLACES)
GASKET
D ATA
INTERNAL GLARE SHIELD OPTION
14.438 in. (367 mm)
.437 in. DIA (11 mm) DIA (2 PLACES)
8.000 in. (203 mm)
4.000 in. (102 mm)
.875 in. (22 mm) DIA
.188 in. (5 mm) DIA KNOCKOUT FOR USE WITH GEM-BOX
• Approximate Net Weight: 15-25 lbs (6-9 kgs) • Suggested Mounting Height: 8-20 ft. (3-7 M) • Effective Projected Area: 1.0 sq. ft. max. (0.09 sq. M max.)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1-8 8 8 - 6 9 - 4 3-533
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2950 (Rev. 06/19/12)
Area Lighting Wallighter® 175 (W1LR, W1SR, W1LG & W1SG)
imagination at work
Product Features For that extra security in an insecure world, GE Area Wallighters provide light were needed, on pathways, entrances, walkways, and building parameters. These area wallighters offer an attracitve, yet economical solution to those outdoor lighting needs where a wall-mounted fixture is the only practical choice.
Applications
Unique Features
• •
• • • • • •
Building perimeters, entrances, walkways and residential yards Loading docks and many other wall mounted area lighting applications
Housing • Two-piece die-cast aluminum housing
Rating •
/
1598 Listed Suitable for Wet Locations
Reflectors • Acrylic refractor or vandal-resistant polycarbonate refractor
Mogul (E39 standard) or medium base (E26 standard) sockets Standard and tamper resistant hardware included Thru-feed conduit entrance on side with built-in conduit clamps Front access to ballast when mounted Field installed Internal Glare Shield (IGS-WL175) available Magnapack packaging available
Ordering Number Logic Wallighter® 175 (W1LR, W1SR, W1LG & W1SG)
____ - __ - _ _ - _ _ _ - ___ - DB __ Light Source
Prod. ID
wattage
W1LR = Wallighter 175 (Mogul Base E39 Socket Standard without Lamp)
See Ballast and See Ballast and See Ballast and Photometric Photometric Photometric Selection Table Selection Table Selection Table
W1SR = Wallighter 175 (Medium Base E26 Socket Standard with Lamp) W1LG = Wallighter 175 (Mogul Base E39 without Lamp with Internal Glare Shield) W1SG = Wallighter 175 (Medium Base E26 with Lamp and Internal Glare Shield)
05 = 50 07 = 70 10 = 100 15 = 150 (55V)
E = Energy Act Compliant Pulse MH (EPMH) M = MH P = PMH S = HPS
Voltage
60Hz 0 = 120/208/ 240/277 Multivolt 1 = 120 2 = 208 3 = 240 4 = 277 5 = 480 C = 120x240x 277 (150W PMH only) D = 347 F = 120X347 T = 220
ballast type selection See Ballast and Photometric Selection Table
PE Function
Lens Type
1 = None For PE Kit, see Accessories 3 = Internal PE control*
A = Acrylic L = Polycarbonate*
A = Autoreg G = Mag-Reg with Grounded * Not available Socket Shell with multivolt H = HPF or 480V Reactor or Lag K = Hot Restart M = Mag-Reg N = NPF Reactor or Lag
* Not for car wash applications
IES Distribution type See Ballast and Photometric Selection Table
-
_ OPTIONs
color DB = Dark Bronze
SN2 = Short Non-cutoff Type II SN3 = Short Non-cutoff Type III
B = Time Delay Switched (Drop Lens only) F = Fusing (Not available with multivolt or dual voltage)
SN4 = Short Non-cutoff Type IV SS3 = Short Semi-cutoff Type III SS4 = Short Semi-cutoff Type IV MN4 = Medium Noncutoff Type IV
50Hz 6 = 220 Y = 240
Ballast and Photometric Selection Table All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
Ballast Type/Voltage
60Hz 50Hz Light Wattage Source Multivolt 120 208 240 277 480 347, 120X347 220 220 240 W1LR Mogul Base Without Lamp 50 HPS H H, K, N H H 70, 100, 150(55V) HPS H, K G,H,K,M G,H,M G,H,M 175 MH A A A A 175 MH A A A A (Coated) W1SR MEDIUM BASE WITH LAMP 70, 100, 150(55V) HPS H, N H, N N/A N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A (Coated) 175 MH N/A N/A N/A N/A 175 MH N/A N/A N/A N/A (Coated) W1LG mogul base without lamp with internal glare shield 50 HPS H H, K, N H H 70, 100, 150(55V) HPS H G,H,K,M G,H,M G,H,M 175 MH N/A N/A N/A N/A (Coated) W1SG medium base with lamp with internal glare shield 70, 100, 150(55V) HPS H, N H, N N/A N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A 70, 100, 150** PMH H*, N H, N, A H, N N/A (Coated) 175 MH N/A N/A N/A N/A 175 MH N/A N/A N/A N/A (Coated)
H G,H,M A A
N/A G,M A A
Acrylic
Polycarbonate
IES Photometric Distribution Curve Number Type 35-
IES Photometric Distribution Number Type 35-
H H A A
H N/A A A
H H,M A A
N/A H A A
SN4 SN4 SN4 SN4
178047 178047 178051 178049
SN4 SN4 SN4 SN4
178046 178046 178050 178048
H, N H H, N, A H, N H, N, A H, N
H, N H, N H, N
N/A N/A N/A
H,M N/A N/A
H N/A N/A
SN3 SN2 SN2
178053 178055 178057
SN3 SN2 SN2
178052 178054 178056
N/A N/A
N/A N/A
A A
A A
A A
A A
SN2 SN2
178055 178057
SN2 SN2
178054 178056
H H G,H,M G,M N/A N/A
H H A
H N/A A
H H,M A
N/A H A
C/F C/F C/F
C/F C/F C/F
SN4 SN4 SS4
178476 178476 178478
H, N H H, N, A H, N H, N, A H, N
H, N H, N H, N
N/A N/A N/A
H,M N/A N/A
H N/A N/A
C/F SN3 SN4
C/F 179122 179125
SS3 C/F C/F
178479 C/F C/F
N/A N/A
A A
A A
A A
A A
SN3 SS3
450685 450686
C/F C/F
C/F C/F
N/A N/A
NOTE: N/A = Not available. C/F = Contact Manufacturer *150W PMH Available in Tri-Volt Multivolt: 120X208X277V or 120X240X277V **150W PMH Only available in HPF-LAG (H) Ballast Type for 120 or 208 or 240 or 277V and Auto-Reg (A) in 120 or 277V
Product Dimensions KNOCKOUT FOR .75 in. (19 mm) CONDUIT
CRADLE FOR .75 in. (19 mm) CONDUIT
.686 in. (17 mm) DIA KNOCKOUT FOR PE KIT ASSEMBLY
4.000 in. (102 mm)
7.750 in. (197 mm)
.358 in. (9 mm) DIA KNOCKOUT (4 PLACES) .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH 4.000 in. (102 mm) OCTAGON BOX (4 PLACES) 4.375 in. 1.375 in. (35 mm) MAX (111 mm) .625 in. (16 mm) MIN 6.344 in. (161 mm)
2.875 in. (73 mm)
12.875 in. (327 mm)
.150 in. (4 mm) .188 in. (5 mm) DIA KNOCKOUT FOR USE WITH 3.250 in. (83 mm) OCTAGON BOX (4 PLACES)
GASKET
D ATA
INTERNAL GLARE SHIELD OPTION
14.438 in. (367 mm)
.437 in. DIA (11 mm) DIA (2 PLACES)
8.000 in. (203 mm)
4.000 in. (102 mm)
.875 in. (22 mm) DIA
.188 in. (5 mm) DIA KNOCKOUT FOR USE WITH GEM-BOX
• Approximate Net Weight: 15-25 lbs (6-9 kgs) • Suggested Mounting Height: 8-20 ft. (3-7 M) • Effective Projected Area: 1.0 sq. ft. max. (0.09 sq. M max.)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1-8 8 8 - 6 9 - 4 3-533
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2950 (Rev. 06/19/12)
