Hanger Options - Alera Lighting
HANGER OPTIONS PENDANT OPTIONS S18 - STEM, NON-SWIVEL
SS18 - STEM, SWIVEL 45° SWIVEL FROM VERTICAL
TECHNICAL
Nut
PM - FEED STEM W/J-BOX, NON-SWIVEL J-Box with fixture stud (furnished by electrical contractor)
Swivel Suspension Plate
Suspension Plate
Crossbar Canopy Ceiling Canopy with Slip Ring
Canopy
Stem (⅝" OD)
Stem (⅝" OD) Stem (⅝" OD)
⅜" IP Hex Nut
Slip Ring with Screw
Screw
Locknut Locknut
Washer
Wastenut Locknut
Locknut
PMS - SLOPED CEILING STEM 45° SWIVEL FROM VERTICAL
Small Hex Nut
PMR - EARTHQUAKE STEM W/CABLE 45° SWIVEL FROM VERTICAL
Visual Leveling Scale
Ceiling Bracket Visual Leveling Scale
Canopy K.O. in fixture channel
Canopy Stem (⅝" OD) Rocker Fitting Kit
Wastenut Kit Standard ⅝"
182
Cable Earthquake
⅜" IP Hex Nut
PENDANT OPTIONS ARE NOT AVAILABLE FOR ALL FIXTURE TYPES. CONTACT FACTORY FOR DETAILS.
Ceiling Bracket
Stem (⅝" OD)
K.O. in fixture channel
K.O. in fixture channel
HANGER OPTIONS CABLE OPTIONS FEED
NON-FEED J-Box Strap w/ ground screw
Ceiling Plate 5"
WASTENUT KIT NOT REQUIRED
T-Bar Caddy Clip*
Stud
ALS1, CV2, QST2, SLS1, SOLO1
Ceiling Plate 2" (optional)
1
TECHNICAL
T-Bar Caddy Clip*
⅜" IP Hex Nut ¼" IP Hex Nut
2
Ceiling Plate 5" (standard)
Bushing Coiled Cord (optional)
Cable Assembly (see options below)
Cable Assembly (see options below)
SJT Power Cord
Bushing Wastenut Kit if required
Wastenut Kit if required *Add TBAR in the suffix of the catalog number if required.
CABLE ASSEMBLY OPTIONS
FCM
CM
CM
CM
CVL 2-L, CVR 2-L, QST
CV, CVPL, CVSL, M, MM
CM
ALS, SLS, SOLO
CPLS, CVL 1-L, CVL 3-L, CVR 1-L, CVR 3-L, MDI NPLS, NVS, PLK, PPLS
T-BAR MOUNTING OPTION
JUNCTION BOX ACCESSORY FOR DROP CEILING INSTALLATION
Alera cable hangers can be installed directly to the T-Bar grid. The IDS clip and additional length of SJT cord will be supplied when the suffix “TBAR” is added to the catalog number.
#93016675- ordered separately
Feed End
• Complies with Article 400.8 NEC with issues concerning cords thru drop ceilings
Non-Feed End Support Wire to Structure (by others)
4" Octagonal J-Box by others
¼" Flex to Junction Box (by others)
T-Bar Clip with ¼-20 Screw
5" Canopy
Ceiling Tile (by others)
Strain Relief Bushing
¼-20 Internal Thread Ceiling Coupler Cable Hanger Assembly
T-Bar Clip T-Bar (by others)
5" Canopy (2” Canopy option) Aircraft Cable
Feed Cord Snap-In Bushing
• 2⅛" deep octagonal box to mount over T-Bar
• Independent support tab provided on back of box for independent support for both junction box and attached lighting fixture. • Ground screw hole location and ½" knockouts located for easier access after mounting. • Knockouts provided for regular type ceiling tiles to keep junction box flush with ceiling tile edge.
3.56" Square
Drop Ceiling Junction Box Drop Ceiling T-Bar By Others (For Drop Ceiling Application)
2.16" Height
¼"-20 × ¾"L Philips Flat Head Screw Countersunk ¼"-20 Gem Bar 3.5" C to C
8/32" Mounting Screws
Connect feed wires to fixture as required
183
SS18 - STEM, SWIVEL 45° SWIVEL FROM VERTICAL
TECHNICAL
Nut
PM - FEED STEM W/J-BOX, NON-SWIVEL J-Box with fixture stud (furnished by electrical contractor)
Swivel Suspension Plate
Suspension Plate
Crossbar Canopy Ceiling Canopy with Slip Ring
Canopy
Stem (⅝" OD)
Stem (⅝" OD) Stem (⅝" OD)
⅜" IP Hex Nut
Slip Ring with Screw
Screw
Locknut Locknut
Washer
Wastenut Locknut
Locknut
PMS - SLOPED CEILING STEM 45° SWIVEL FROM VERTICAL
Small Hex Nut
PMR - EARTHQUAKE STEM W/CABLE 45° SWIVEL FROM VERTICAL
Visual Leveling Scale
Ceiling Bracket Visual Leveling Scale
Canopy K.O. in fixture channel
Canopy Stem (⅝" OD) Rocker Fitting Kit
Wastenut Kit Standard ⅝"
182
Cable Earthquake
⅜" IP Hex Nut
PENDANT OPTIONS ARE NOT AVAILABLE FOR ALL FIXTURE TYPES. CONTACT FACTORY FOR DETAILS.
Ceiling Bracket
Stem (⅝" OD)
K.O. in fixture channel
K.O. in fixture channel
HANGER OPTIONS CABLE OPTIONS FEED
NON-FEED J-Box Strap w/ ground screw
Ceiling Plate 5"
WASTENUT KIT NOT REQUIRED
T-Bar Caddy Clip*
Stud
ALS1, CV2, QST2, SLS1, SOLO1
Ceiling Plate 2" (optional)
1
TECHNICAL
T-Bar Caddy Clip*
⅜" IP Hex Nut ¼" IP Hex Nut
2
Ceiling Plate 5" (standard)
Bushing Coiled Cord (optional)
Cable Assembly (see options below)
Cable Assembly (see options below)
SJT Power Cord
Bushing Wastenut Kit if required
Wastenut Kit if required *Add TBAR in the suffix of the catalog number if required.
CABLE ASSEMBLY OPTIONS
FCM
CM
CM
CM
CVL 2-L, CVR 2-L, QST
CV, CVPL, CVSL, M, MM
CM
ALS, SLS, SOLO
CPLS, CVL 1-L, CVL 3-L, CVR 1-L, CVR 3-L, MDI NPLS, NVS, PLK, PPLS
T-BAR MOUNTING OPTION
JUNCTION BOX ACCESSORY FOR DROP CEILING INSTALLATION
Alera cable hangers can be installed directly to the T-Bar grid. The IDS clip and additional length of SJT cord will be supplied when the suffix “TBAR” is added to the catalog number.
#93016675- ordered separately
Feed End
• Complies with Article 400.8 NEC with issues concerning cords thru drop ceilings
Non-Feed End Support Wire to Structure (by others)
4" Octagonal J-Box by others
¼" Flex to Junction Box (by others)
T-Bar Clip with ¼-20 Screw
5" Canopy
Ceiling Tile (by others)
Strain Relief Bushing
¼-20 Internal Thread Ceiling Coupler Cable Hanger Assembly
T-Bar Clip T-Bar (by others)
5" Canopy (2” Canopy option) Aircraft Cable
Feed Cord Snap-In Bushing
• 2⅛" deep octagonal box to mount over T-Bar
• Independent support tab provided on back of box for independent support for both junction box and attached lighting fixture. • Ground screw hole location and ½" knockouts located for easier access after mounting. • Knockouts provided for regular type ceiling tiles to keep junction box flush with ceiling tile edge.
3.56" Square
Drop Ceiling Junction Box Drop Ceiling T-Bar By Others (For Drop Ceiling Application)
2.16" Height
¼"-20 × ¾"L Philips Flat Head Screw Countersunk ¼"-20 Gem Bar 3.5" C to C
8/32" Mounting Screws
Connect feed wires to fixture as required
183
