how to set up motion detection over the network for dvr systems
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP 1: Turn on your computer and open Internet Explorer.
STEP 2: In the address bar, enter in the IP address of your DVR.
1|Pa ge
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP 3: Click on the “LOGIN” button. If you set up a password on your DVR, enter it in the “PASSWORD” field before clicking “LOGIN” (If this screen does not appear, see the “ActiveX Controls” guide).
STEP 4: Click on the “SETUP ” button.
2|Pa ge
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP 5: Under RECORD Tab, go down to RECORD Mode and select TIMER RECORD and click on SCHEDULE
STEP 6: Check on ALARM button. Make all the boxes become RED and then click Apply and Exit
3|Pa ge
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP7: Click “ALARM”.
STEP 13: Set the Motion Detect Status to “ON”. And Set the Sensitivity to 3. Click Apply.
4|Pa ge
STEP 2: In the address bar, enter in the IP address of your DVR.
1|Pa ge
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP 3: Click on the “LOGIN” button. If you set up a password on your DVR, enter it in the “PASSWORD” field before clicking “LOGIN” (If this screen does not appear, see the “ActiveX Controls” guide).
STEP 4: Click on the “SETUP ” button.
2|Pa ge
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP 5: Under RECORD Tab, go down to RECORD Mode and select TIMER RECORD and click on SCHEDULE
STEP 6: Check on ALARM button. Make all the boxes become RED and then click Apply and Exit
3|Pa ge
HOW TO SET UP MOTION DETECTION OVER THE NETWORK FOR DVR SYSTEMS MODEL NUMBERS: QS-408 STEP7: Click “ALARM”.
STEP 13: Set the Motion Detect Status to “ON”. And Set the Sensitivity to 3. Click Apply.
4|Pa ge
