HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS

HOW TO VIEW YOUR CAMERAS REMOTELY FOR

DVR SYSTEMS

MODEL NUMBERS: QSD2316L, QSTD2408, QSTD2416, QSDT8DP This guide is to instruct you on how to access your cameras on a computer outside of the network that your DVR is connected to.

STEP 1: Open Internet Explorer on the computer connected to the router you forwarded your ports from your DVR to.

STEP 2: Go to www.canyouseeme.org.

1|Page

HOW TO VIEW YOUR CAMERAS REMOTELY FOR

DVR SYSTEMS

MODEL NUMBERS: QSD2316L, QSTD2408, QSTD2416, QSDT8DP

STEP 3: Your Public IP is listed on this site.

STEP 4: Enter your Public IP Address in the address bar on a computer outside of your network.

NOTE: If your HTTP port (Web port) is other than 80, you must enter it after your IP address followed by a colon. (:)

2|Page

HOW TO VIEW YOUR CAMERAS REMOTELY FOR

DVR SYSTEMS

MODEL NUMBERS: QSD2316L, QSTD2408, QSTD2416, QSDT8DP

STEP 5: A small headline will appear as follows.

STEP 6: Right click on the headline and select “Install This Add-on for All Users on This Computer”.

STEP 7: A small box will appear; click “Install”. Once the ActiveX Control has successfully been added, press “F5” to refresh your browser.

3|Page

HOW TO VIEW YOUR CAMERAS REMOTELY FOR

DVR SYSTEMS

MODEL NUMBERS: QSD2316L, QSTD2408, QSTD2416, QSDT8DP

STEP 8: A blue screen will appear. Enter your login information from your DVR (default username is admin and the default password is 123456).

STEP 9: The following application will appear so that you may view your cameras.

4|Page