INSTALLATION OF STI-6520, STI-6521 and STI-6522 BOPPER
Safety Technology International, Inc.
8.3 in. Safety Technology International (Europe) Ltd. 7.70 in. (211mm)Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch (196mm) Worcestershire • B98 0HU • England 6.32 in. 5.23 in. (0) 1527 520 999 (161mm) Tel: 44 • Fax: 44 (0) 1527 501 999 (133mm) E-mail: [email protected] • Web: www.sti-europe.com 3.4 in. (86mm)
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com
DRILL (5) 3/16 DIA. HOLES AS SHOWN
TOP VIEW
8.3 in. (211mm) 5.23 in. (133mm)
0.870 in.(22mm)
0.870 in.(22mm) 1.77 in.(45mm)
3.00 in.(76mm)
1001200 SPACER
2.99 in. (76mm) 3.12 in. (79mm)
SIDE VIEW STI-6520 STI-6521
4.62 in. (117mm)
1.77 in.(45mm) 2.38 in.(60mm)
3.86 in. (98mm)
5.5 in. (140mm)
2.99 in. (76mm) 3.12 in. (79mm)
7.70 in. (196mm) 6.32 in. (161mm) 3.4 in. (86mm) 2.99 in. (76mm)
6.37 in. (161mm)
SIDE VIEW
HATCHED SECTION REMOVED AT FACTORY FOR STI-6521-S
PRODUCT DIMENSIONS
19018 ANCHOR (5) PROVIDED 19063 SCREW #6 X 2 in. (3) PROVIDED
19039 SCREW #6 x 1 1/4 in. (2) PROVIDED BOTTOM TWO (2) SCREWS INSTALLED FIRST
5.5 in. (140mm)
SIDE VIEW 4.62 in. STI-6522 (117mm)
0.870 in.(22mm)
0.870 in.(22mm)
1.77 in.(45mm) 3.30 in.
1.77 in.(45mm)
(84mm) 2.38 in.(60mm) 2.99 in. (76mm) 3.12 in. (79mm)
SIDE VIEW STI-6520 STI-6521
2.99 in. (76mm)
4.18 in. (106mm)
3.12 in. (79mm)
END VIEW STI-6522
SIDE VIEW STI-6522 2.99 in. (76mm)
3.30 in. (84mm)
PAPER BACKING (REMOVE)
4.18 in. (106mm)
92099 GASKET 72699 COVER ASSEMBLY
INSTALLATION INSTRUCTIONS 1. Using the spacer as a template, mark and drill (5) 3/16 dia. holes. 2. Install the (5) anchors and fasten the (2) bottom screws of the spacer. 3. Remove backing paper from gasket and place gasket on spacer with bottom of gasket aligned with bottom of spacer. 4. Install the cover assembly with the (3) remaining hinge screws.
HATCHED SECTION REMOVED AT FACTORY FOR STI-6521-S
END VIEW STI-6522
CLEANING INSTRUCTIONS 1. Rinse cover with water to remove abrasive dust and dirt. 2. Wash with soap or mild deterent using a soft cloth. (DO NOT SCRUB.) 3. Rinse once more, then dry with a soft cloth or chamois. 4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI-6520, STI-6521 and STI-6522 BOPPER STOPPER®
All specifications and information shown were current as of publication and are subject to change without notice. 6520/21/22IS JUNE2013
8.3 in. Safety Technology International (Europe) Ltd. 7.70 in. (211mm)Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch (196mm) Worcestershire • B98 0HU • England 6.32 in. 5.23 in. (0) 1527 520 999 (161mm) Tel: 44 • Fax: 44 (0) 1527 501 999 (133mm) E-mail: [email protected] • Web: www.sti-europe.com 3.4 in. (86mm)
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com
DRILL (5) 3/16 DIA. HOLES AS SHOWN
TOP VIEW
8.3 in. (211mm) 5.23 in. (133mm)
0.870 in.(22mm)
0.870 in.(22mm) 1.77 in.(45mm)
3.00 in.(76mm)
1001200 SPACER
2.99 in. (76mm) 3.12 in. (79mm)
SIDE VIEW STI-6520 STI-6521
4.62 in. (117mm)
1.77 in.(45mm) 2.38 in.(60mm)
3.86 in. (98mm)
5.5 in. (140mm)
2.99 in. (76mm) 3.12 in. (79mm)
7.70 in. (196mm) 6.32 in. (161mm) 3.4 in. (86mm) 2.99 in. (76mm)
6.37 in. (161mm)
SIDE VIEW
HATCHED SECTION REMOVED AT FACTORY FOR STI-6521-S
PRODUCT DIMENSIONS
19018 ANCHOR (5) PROVIDED 19063 SCREW #6 X 2 in. (3) PROVIDED
19039 SCREW #6 x 1 1/4 in. (2) PROVIDED BOTTOM TWO (2) SCREWS INSTALLED FIRST
5.5 in. (140mm)
SIDE VIEW 4.62 in. STI-6522 (117mm)
0.870 in.(22mm)
0.870 in.(22mm)
1.77 in.(45mm) 3.30 in.
1.77 in.(45mm)
(84mm) 2.38 in.(60mm) 2.99 in. (76mm) 3.12 in. (79mm)
SIDE VIEW STI-6520 STI-6521
2.99 in. (76mm)
4.18 in. (106mm)
3.12 in. (79mm)
END VIEW STI-6522
SIDE VIEW STI-6522 2.99 in. (76mm)
3.30 in. (84mm)
PAPER BACKING (REMOVE)
4.18 in. (106mm)
92099 GASKET 72699 COVER ASSEMBLY
INSTALLATION INSTRUCTIONS 1. Using the spacer as a template, mark and drill (5) 3/16 dia. holes. 2. Install the (5) anchors and fasten the (2) bottom screws of the spacer. 3. Remove backing paper from gasket and place gasket on spacer with bottom of gasket aligned with bottom of spacer. 4. Install the cover assembly with the (3) remaining hinge screws.
HATCHED SECTION REMOVED AT FACTORY FOR STI-6521-S
END VIEW STI-6522
CLEANING INSTRUCTIONS 1. Rinse cover with water to remove abrasive dust and dirt. 2. Wash with soap or mild deterent using a soft cloth. (DO NOT SCRUB.) 3. Rinse once more, then dry with a soft cloth or chamois. 4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI-6520, STI-6521 and STI-6522 BOPPER STOPPER®
All specifications and information shown were current as of publication and are subject to change without notice. 6520/21/22IS JUNE2013
