PISCO SLOT HEAD SPEED CONTROL
No, N P 50-01e
Q Troubled by unintended setting change ？ A
Slot-head Speed Controller JSD can help you!
It prevents unnecessary manual operations during the adjustment. Design without an external needle for speed adjustment. Use a slot screwdriver to adjust the needle.
Approx. 2/3 height of the conventional speed controller.* Suitable for a small space.
Compact piping!
*Compared to the max. height of the conventional speed controller.
Rotation of the resin body
Specif i cations
2 types are available.
Rotation of the resin body
Type
Elbow・Free
Fluid medium
360°rotatable resin body (Elbow type). 360°rotatable resin body and push-in fitting part (Free type). Free direction for piping.
Air
Operating pressure range
14.5～130psi (0.1 ～ 0.9MPa)
Check valve opening pressure
7.25psi (0.05MPa)
Operating temp. range
F (0 ～60℃ ) 32 ～140°
Rotation of the push-in fitting part
Rotation of the resin body Rotation of the resin body
Elbow type
Construction ⑩ ⑦
⑤①
②
⑥ ⑧ ⑨
③ ④ Tube end Sealock-coated
No. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
Parts name Lock claws Release ring Tube Guide ring Elastic sleeve O-ring Metallic body *1 Resin body Diaphragm Needle
Rotation of type the push-in Free fitting part
Material Stainless steel POM Polyurethane or nylon Nickel-plated brass NBR NBR Nickel-plated brass PBT HNBR Nickel-plated brass
*1. Metallic body with M3 thread : Special stainless steel (Austenite or ferritic stainless steel with SUS303 equivalent corrosivity) *2. Gasket for metric thread : SUS304+NBR or SPCC+NBR for standard spec. POM for cleanroom packaging.
2016 NEW PRODUCTS
Model designation (Example) JSD C 1/4 - N1 A U ①
②
③
④
Slot-head speed controller
④ .Control direction Code
A
B
Control direction
Meter-out control
Meter-in control Free flow
Control flow
Solenoid valve
Single acting cylinder
Solenoid valve
Cylinder Control flow
Free flow
Speed controller
Speed controller
Air from thread side is controlled. Air from tube side is not controlled and flows out from thread side.
Air from tube side is controlled. Air from thread side is not controlled and flows out from tube side.
Grooved markings on three points on its upper plug, and a JIS symbol on its resin body.
Metric thread
No marking
Grooved markings (Three points)
JIS symbol
Identification
JIS symbol
A or B marking on its upper plug and a JIS symbol on its resin body.
Taper pipe thread
Marking (A)
Marking (B)
JIS symbol
JIS symbol
③ .Thread size （R） Metric thread Code
M3
M5
Taper pipe thread 01
02
03
NPT thread
Unified thread
04
U10
N1
N2
N3
N4
Thread size M3×0.5 M5×0.8 R1/8 R1/4 R3/8 R1/2 No.10-32UNF NPT1/8 NPT1/4 NPT3/8 NPT1/2
②.Tube dia. （øD） mm size Code Tube O.D. （㎜）
4
6
8
10
12
1/8
1/4
5/16
3/8
ø3
ø4
ø6
ø8
ø10
ø12
ø3.2
ø6.35
ø7.94
ø9.53
①． Type C：Elbow S：Free
2
inch size
3
Slot-head Speed Controller
How to adjust the speed Use a slot screwdriver to adjust the speed of actuators with slot-head speed controller. Refer to the table below for size of slot screwdrivers. ●The tip of a slot screwdriver
A Max. thickness of the applicable slot screwdriver tip（㎜） M3×0.5, M5×0.8, U10 0.7 Thread size（R）
A
B
B Max. width of the applicable slot screwdriver tip（㎜） 3.5
01, N1
0.8
4
02, N2
1.2
5
03, N3
1.2
7
04, N4
1.6
11
① .Increasing speed
② .Reducing speed
Turn the needle in the
Turn the needle in the
counterclockwise direction
clockwise direction to reduce
from a fully closed state to
the speed of an actuator.
increase the speed of an actuator.
How to insert and disconnect 1. How to insert and disconnect tubes ① .Tube insertion
② .Tube disconnection
Insert a tube into Push-In
The tube is disconnected
Fitting up to the tube end.
by pushing release-ring
Lock-claws bite the tube and
to release Lock-claws.
fix it automatically, then the
Make sure to stop air
elastic sleeve seals around
supply before the tube
the tube.
disconnection.
2. How to tighten thread Use a spanner to tighten a hexagonal-column. When tightening thread, refer to the table below. Thread type Metric thread
Taper pipe thread
Thread size
Tightening torque
M3×0.5 M5×0.8
0.7N･m 1 ~ 1.5N･m
R1/8
4.5 ~ 6.5N･m
R1/4
7 ~ 9N･m
R3/8
12.5 ~ 14.5N·m
R1/2
20 ~ 22N·m
3
2016 NEW PRODUCTS
JSDC Elbow（mm - R, inch - R）
øG
øX Y
F
X
Release ring Mini øG: 3 ∼6, 1/8
E
Hex.
Release ring Standard
B L1 L2 A
A
øP1
B L1 L2
øD
C
R
øP2
R
Metric thread
Unit：mm Model code JSDC3-M3 ♶ ₅ JSDC3-M5 ♶ ₅
Tube O.D. øD 3
JSDC4-M3 ♶ ₅ JSDC4-M5 ♶ ₅
4
B
L1
L2
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6[6.9] M5×0.8 2.9[3.2] 22.2 M5×0.8 2.9[3.2] 22.2 R1/8
JSDC6-M5 ♶ ₅ JSDC6-02 ♶ ₅
A
19.3 [19] 6.7 [6.4]
8
28.4
19.3 [19] 6.7 [6.4] 24.4
8
M5×0.8 2.9[3.2] 22.2 19.3 [19] 7.5[7.2] 6
R1/8
8
28.4
24.4
10.7
R1/4
11.1
33
27
11.9
R3/8
13.2
38.9
32.6
15.4
JSDC8-01 ♶ ₅
R1/8
8
28.4
24.4
11.9
R1/4
11.1
33
27
13.2
R3/8
13.2
38.9
32.6
15.4
JSDC8-03 ♶ ₅
8
10.7
JSDC6-03 ♶ ₅ JSDC8-02 ♶ ₅
øP1 øP2
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6[6.9]
JSDC4-01 ♶ ₅ JSDC6-01 ♶ ₅
R
8
9.8 9.8
Tube end C 11
E
15.4 0.7
10
9.8
17.5 0.7
3.5
8
4
10
5
16
22
20.2 17
18.4 22
18.1
29
7
19
4
10
28.4
5
16
7
19
28.9
16
47.2
39
18
28
31
11.1
33
27
14.8
18.4
30.9
R3/8
13.2
38.9
32.6
16.7
R1/2
16
47.2
39
18
R3/8
13.2
38.9
32.6
18.4
R1/2
16
47.2
39
19.7
JSDC12-03 ♶ ₅ JSDC1/8-M3 ♶₅ JSDC1/8-M5 ♶₅
12 1/8
JSDC1/4-M5 ♶₅ JSDC1/4-01 ♶₅
1/4
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6[6.9] M5×0.8 2.9[3.2] 22.2
19.3 [19] 6.7 [6.4]
M5×0.8 2.9[3.2] 22.2
19.3 [19] 8.4 [8.1]
22
20.2 31.2
28 21 8
22 28 9.8
1.2
26.9 0.8
R1/2
JSDC12-04 ♶ ₅
7.8
4
R1/4
JSDC10-04 ♶ ₅
9.8
8
17.7 0.8
14.4
17.6
3.5
14.4
JSDC8-04 ♶ ₅ 10
Y
8
18.4
14.4
X (øX )
3.5
10.5 14.4 11.6 18.3 0.8 14.4
øG Hex.
15.4 0.7
11
JSDC10-02 ♶ ₅ JSDC10-03 ♶ ₅
F
1.2 1.6 1.2
23.4 11
9.8
7
19
36.4 1.6
11
24
15.4 0.7
3.5
8
3.5
8
24.4
10.9
12.4 14.4
23.5 0.8
4
10
33
27
12.2
18.4
25.5 1.2
5
16
R1/8
8
28.4
24.4
11.9
14.4
26.9 0.8
R1/4
11.1
33
27
13.2
JSDC5/16-03 ♶₅
R3/8
13.2
38.9
32.6
15.4
22
28.9
JSDC3/8-02 ♶₅
R1/4
11.1
33
27
14.8
18.4
30.9
R3/8
13.2
38.9
32.6
16.7
JSDC3/8-03 ♶₅
3/8
17.6
22
20.2
31.2
1.2
1,440
7
1,150
1,330
16
1,350
1,560
37
1,450
1,670
63
1,850
2,130
19
1,450
1,670
40
1,550
1,790
64
1,950
2,250 2,420
36.9 1.2
1.2
1,100
1,250
2,020
19
14.4 18.4 18.1 28.4
950
16
2,100
28.4
5/16
6.3
1,750
8
JSDC5/16-02 ♶₅
1,100 1,580
43
11.1
JSDC5/16-01 ♶₅
-
950 1,370
113
R1/4
17
13.8
6.3 5.6
24
R1/8
JSDC1/4-02 ♶₅
-
1,580
16 24
0.7
9.8
1,370
5 7
24
11.8
7.8
5.6
11
11
33.6 1.6
9.8
Weigh List price (JPY) (g) Std. Cleanroom
4
10
5
16
16.8
-
19.8
-
9.8
7.8
11.8
13.8
-
-
67
1,950
2,250
116
2,200
2,530
70
2,150
2,480
119
2,250
2,590
5.7
1,370
1,580
6.4
950
1,100
8.5
1,150
1,330
18
1,350
1,560
38
1,450
1,670
19
1,450
1,670
40
1,550
1,790
7
19
63
1,950
2,250
5
16
43
1,750
2,020
7
19
67
1,950
2,250
16.8
-
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [ ] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm). *6. List price of Light-Gray spec. is as the one of Standard spec, and Cleanroom & Light-Gray spec is same as Cleanroom spec.
4
Slot-head Speed Controller
JSDC Elbow(inch- NPT）
øG
øX Y
F
X
Release ring Mini øG: 1/8, 5/32
E
Hex.
Release ring Standard
øP2
B L1 L2 A
A
øP1
B L1 L2
øD
C
R
R
Unified thread
Unit：mm Model code
Tube O.D. øD
JSDC1/8-U10 ♶ U
1/8
R
A
B
L1
L2
øP1 8
No.10-32UNF
2.9
22.2
19.3
6.7
No.10-32UNF
2.9
22.2
19.3
6.7
1/8-27NPT
8
28.4
24.3
10.6
No.10-32UNF
2.9
22.2
19.3
8.4
1/8-27NPT
8
28.4
24.3
10.8
1/4-18NPT
11.1
33
27.2
12.4
JSDC1/4-N3 ♶ U
3/8-18NPT
13.2
38.9
32.8
15.6
JSDC5/16-N1 ♶ U
1/8-27NPT
8
28.4
24.3
11.8
1/4-18NPT
11.1
33
27.2
13.4
3/8-18NPT
13.2
38.9
32.8
15.6
1/2-14NPT
16
47.2
39.1
18
1/4-18NPT
11.1
33
27.2
15
3/8-18NPT
13.2
38.9
32.8
16.9
JSDC5/32-U10 ♶ U JSDC5/32-N1 ♶ U
5/32
JSDC1/4-U10 ♶ U JSDC1/4-N1 ♶ U JSDC1/4-N2 ♶ U
JSDC5/16-N2 ♶ U JSDC5/16-N3 ♶ U
1/4
5/16
JSDC5/16-N4 ♶ U JSDC3/8-N2 ♶ U JSDC3/8-N3 ♶ U
3/8
8
Tube end øP2 C 9.8 9.8 14.4
11 11
9.8 12.4
14.4 18.4
14.4
14.4
17
22
7.8
5/16 5/16
17.7
0.8
4
7/16
24
0.7
3.5
5/16
23.5
0.8
4
7/16
5
5/8
25.5
28.4 28.9 30.9
20.2
9.8
3.5 3.5
31
18.4
Y
0.7
29
22
Hex.
0.7
26.9 18.1
øG
15.4
22 18.4
F
15.4
14.4
28 17.6
E
X (øX )
31.2
1.2 0.8 1.2 1.6 1.2
9.8
11.8
7.8
-
Weigh List price (g) (JPY) 6.3
950
6.6
950
17
1,250
8.4
1,150
19
1,350
38
1,450
7
3/4
64
1,850
4
7/16
20
1,450
5
5/8
40
1,550
7
3/4
11
1
5
5/8
7
3/4
13.8
16.8
-
-
64
1,950
118
2,100
43
1,750
67
1,950
JSDC3/8-N4 ♶ U
1/2-14NPT
16
47.2
39.1
18
28
33.6
1.6
11
1
121
2,200
JSDC1/2-N3 ♶ U
3/8-18NPT
13.2
38.9
32.8
18.6
22
37.2
1.2
7
3/4
70
2,150
1/2-14NPT
16
47.2
39.1
19.7
36.7
1.6
11
1
123
2,250
JSDC1/2-N4 ♶ U
1/2
21
28
23.7
19.8
-
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm).
5
2016 NEW PRODUCTS
JSDS Free（mm - R, inch - R）
F
øG
X
øX
E Release ring Mini øG : 3 ∼6, 1/8
C L3
øP1
Release ring Standard
A
A
B L1 L2
B L1 L2
Hex.
Y
øD
R
øP2
R
Metric thread
Unit：mm Model code JSDS3-M3 ♶ ♷ JSDS3-M5 ♶ ♷
Tube O.D. øD 3
JSDS4-M3 ♶ ♷ JSDS4-M5 ♶ ♷
A
4
L1
L2
M3×0.5 2.5 [2.2] 21.7 19.2[19.5] 6.6 [6.9] M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4]
L 3 øP1 øP2 16.1
M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4] 16.1 R1/8
JSDS6-M5 ♶ ♷
8
8
28.4
24.4
8
10.7
M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4] R1/8
8
JSDS6-02 ♶ ♷
R1/4
11.1
JSDS8-01 ♶ ♷
R1/8
8
R1/4
11.1
JSDS8-02 ♶ ♷
B
M3×0.5 2.5 [2.2] 21.7 19.2[19.5] 6.6 [6.9]
JSDS4-01 ♶ ♷ JSDS6-01 ♶ ♷
R
6
8
28.4
9.8 9.8
Tube end C
E
F
11
10
0.7
11
10
10.5 0.7
3.5
8
4
10
950
1,100
16
1,250
1,440
7.5
1,150
1,330
17
1,350
1,560
18.4
14.7 1.2
5
16
37
1,450
1,670
10.7
14.4
15.5 0.8
4
10
20
1,450
1,670
33
27
11.9
5
16
41
1,550
1,790
14.5 18.4 18.1 17.5
15.6
27.7
22
20
11.9
29
18.4
18
R3/8
13.2
38.9
32.6
15.6
30
R3/8
13.2
38.9
32.6
15.6
33.7
R1/2
16
47.2
39
18
35.2
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6 [6.9] M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4]
16.1
17.5 21 8
22 22 28 9.8
20.2 23.4 11
9.8
M5×0.8 2.9 [3.2] 22.2 19.3 [19] 8.2 [7.9]
1.2
-
7
19
65
1,950
2,250
5
16
44
1,750
2,020
7
19
21
1.2
7
19
25
1.6
11
24
10
13.8
0.7
3.5
8
14.3 0.7
3.5
8
16.8 19.8
-
9.8 7.8
2,250 2,480
122
2,250
2,590
6.1
1,370
1,580
6.8
950
1,100
9.5
1,150
1,330
8
28.4
24.4
10.7
23 12.4 14.4
15.5 0.8
4
10
19
1,350
1,560
11.1
33
27
11.9
18.4
17.5 1.2
5
16
39
1,450
1,670
JSDS5/16-01 ♶ ♷
R1/8
8
28.4
24.4
10.7
14.4
15.5 0.8
4
10
20
1,450
1,670
R1/4
11.1
33
27
11.9
41
1,550
1,790
R3/8
13.2
38.9
32.6
15.6
65
1,950
2,250
5/16
JSDS3/8-02 ♶ ♷ JSDS3/8-03 ♶ ♷
3/8
14.5 18.4 18.1 17.5
27.7
R1/4
11.1
33
27
11.9
29
R3/8
13.2
38.9
32.6
15.6
30
22 17.5
18.4 22
20 20.2
18 20.5
1.2 1.2
5
16
7
19
5
16
7
19
13.8
16.8
-
1,950 2,150
R1/4
JSDS5/16-03 ♶ ♷
11.8
68 72
R1/8
25.7
17
20.5
1.2
JSDS1/4-02 ♶ ♷ JSDS5/16-02 ♶ ♷
1/4
6.7
11.9 25.7
11.8 9.8
1,100 1,580
27
27
JSDS1/4-01 ♶ ♷
9.8 7.8
950 1,370
24.4 32.6
JSDS1/4-M5 ♶ ♷
6
1,580
33
33
JSDS1/8-M5 ♶ ♷
6.8
1,370
28.4 38.9
1/8
10
9.8
17.5 10.5 14.4 11.6 12.7 0.8
13.2
JSDS1/8-M3 ♶ ♷
8
6.1
10.7
11.1
12
3.5
Y
24.4
R3/8
JSDS12-04 ♶ ♷
9.8 7.8
8
4
R1/4
JSDS12-03 ♶ ♷
3.5
12.2 0.8
JSDS10-02 ♶ ♷
10
X (øX )
14.4
JSDS8-03 ♶ ♷ JSDS10-03 ♶ ♷
0.7
øG Hex.
Weigh List price (JPY) (g) Std. Cleanroom
-
-
44
1,750
2,020
68
1,950
2,250
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [ ] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm). *6. List price of Light-Gray spec. is as the one of Standard spec, and Cleanroom & Light-Gray spec is same as Cleanroom spec.
6
Slot-head Speed Controller
JSDS Free (inch- NPT）
F
øG
X
øX
E
Hex.
Release ring Mini øG : 1/8, 5/32
Release ring Standard
A
A
B L1 L2
B L1 L2
C L3
øP1
Y
øD
R
øP2
R
Unified thread
Unit：mm Model code
Tube O.D. øD
JSDS1/8-U10 ♶ U
1/8
JSDS5/32-U10 ♶ U JSDS5/32-N1 ♶ U
5/32
JSDS1/4-U10 ♶ U JSDS1/4-N1 ♶ U
R
A
1/8-27NPT
8
1/4
1/8-27NPT
8
1/8-27NPT 5/16
JSDS5/16-N3 ♶ U
JSDS1/2-N3 ♶ U JSDS1/2-N4 ♶ U
L3
28.4 24.3 10.6
16.1
øP1
8 8
No.10-32UNF 2.9 22.2 19.3 8.2
JSDS5/16-N1 ♶ U
JSDS3/8-N3 ♶ U
L2
No.10-32UNF 2.9 22.2 19.3 6.7 16.1
1/4-18NPT 11.1
JSDS3/8-N2 ♶ U
L1
No.10-32UNF 2.9 22.2 19.3 6.7
JSDS1/4-N2 ♶ U JSDS5/16-N2 ♶ U
B
8
1/4-18NPT 11.1
28.4 24.3 10.6 33 33
27.2 12.1
23
1/2
1/4-18NPT 11.1
25.7
27.2 12.1
29
3/8-18NPT 13.2 38.9 32.8 15.9
30
3/8-18NPT 13.2 38.9 32.8 15.9
34
1/2-14NPT
16
33
14.4
12.4 14.4
11 11
47.2 39.1 18.1 35.5
E
21
øG
10
0.7
3.5 5/16 9.8
0.7
3.5 5/16
12.2 0.8 14.3 0.7
4
7/16
9.8
15.5 0.8
4
7/16 11.8
17.5 1.2
5
5/8
14.4
15.5 0.8
4
7/16
5
5/8
7
3/4
17
18.4 22 22 28
20 20.2 23.7
18 20.5
1.2 1.2
Y
7.8 7.8
3.5 5/16
18.4
22 17.5
F
X Hex. (øX )
10
14.5 18.4 18.1 17.5
3/8-18NPT 13.2 38.9 32.8 15.9 27.7 3/8
9.8 9.8 9.8
27.2 12.1
28.4 24.3 10.6
Tube end øP2 C
5
5/8
7
3/4
21
1.2
7
3/4
25
1.6
11
1
13.8
-
-
16.8
-
19.8
-
Weigh List price (g) (JPY)
6.8
950
7
950
17
1,250
9.5
1,150
20
1,350
39
1,450
21
1,450
41
1,550
66
1,950
44
1,750
69
1,950
72
2,150
127
2,250
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm).
7
2016 NEW PRODUCTS
JSDS 6-01 8-01 1/4-N1 5/16-N1 Cylinder tube I.D. Max. ø32mm
6-02 6-02 8-02 8-02 10-02 10-02 1/4-N2 1/4-N2 5/16-N2 5/16-N2 3/8-N2 3/8-N2 Cylinder tube I.D. Max. ø40mm
8
JSDC 6-03
0.5 0.3
6
0.7 0.5
100
0.3
50
0.1
1
2
3
4 5 6 7 8 Needle rotations
250
0.7
200
0.5
150 100
0.3
50
0.1
400
1
2
3
4 5 6 7 8 Needle rotations
0.7 0.5
200
0.3 100
1200
40 20
0.1
Control flow
150 100 50
450 400 350 300 250 200 150 100 50
600 500 400 300 200 100
1200
1000
0.9
800
0.7
Free flow
200
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure(MPa)
250
700
0.9
Free flow
60
0
9 10 11 12
Control flow
300
0
Flow rate (l/min(ANR))
0.9
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa)
80
0
9 10 11 12
Control flow
0 0
10
300 0.9
0
30 20
0
7
Control flow
150
300
Pressure (MPa)
0.1
3 4 5 Needle rotations
40
100 Flow rate (l/min(ANR))
0.7
Free flow
70 60 50
0
7
0.9
200
0
6
Flow rate (l/min(ANR))
Flow rate (l/min(ANR))
3 4 5 Needle rotations
Flow rate (l/min(ANR))
JSDC 4-01 6-01 8-01 5/32-N1 1/4-N1 5/16-N1
0.1
250
Flow rate (l/min(ANR))
Max. ø25mm
Flow rate (l/min(ANR))
Cylinder tube I.D.
300
ANR))
JSDS 4-01 5/32 N1
0.3
Flow rate (l/min(ANR))
Max. ø20mm
0.5
(ANR))
Cylinder tube I.D.
Control flow 100 90 80 70 60 50 40 30 20 10 0 0 1 2
0.7
Pressure (MPa)
JSDS
0.9
Pressure (MPa)
JSDC 3-M5 4-M5 6-M5 1/8-U 10 5/32-U 10 1/4-U 10
Flow rate (l/min(ANR))
Max. ø16 mm
80
Pressure (MPa)
Cylinder tube I.D.
Control flow 100 90 80 70 60 50 40 30 20 10 0 0 1 2
Pressure (MPa)
JSDS 3-M3 4-M3 1/8-M3
Pa)
JSDC 3-M3 4-M3 1/8-M3
Flow rate (l/min(ANR))
Flow characteristic (Reference)
1000 800
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
4) 1/ ( 6
,8 01
6) /1 (5
01
-01
C4
D JS
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
)/8 , 02 0(3 ) 1 /4 2, (1 ) - 0 6 6 2 DC 5/1 ) -0 JS S8( /4 1 ( D 6 JS DS C/ JS D JS
02
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
Max. ø63mm
0.5
400
0.3
200
0.1
JSDC 10-04 JSDS 12-04 12-04 4 4
Cylinder tube I.D. Max. ø100mm
Flow rate (l/min(ANR))
Max. ø80mm
0.3
0.7 0.5 0.3
400
0.1
Control flow
0.7 0.5
800
0.3
400
3000 2500
0.1
Control flow
0.7
1500
0.5
1000
0.3
500
0.1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
Free flow
1000 800 600 400 200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
1200 1000 800 600 400 200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
1400 1200 1000 800 600 400 200
3000 0.9
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa)
1200
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
2000
0
200
1600 0.9
1200
400
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
1600
600
1400
0.9
800
800
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations Control flow
1200
0
Flow rate (l/min(ANR
Pressure (MPa)
0.1
Flow rate (l/min(ANR))
0.5
400
0
Flow rate (l/min(ANR))
Cylinder tube I.D.
0.9
Free flow
1000
1400
0.7
2000
JSDC 8-04 5/16 N
Control flow
800
0 ), 3/ 8 2 ( -0 0 4 ) ,1 400 1/ ) - 02 ( Slot-headC6Speed 6 2Controller D 5/1 -0 300 JS S8( 4) / 1 6( 200 SD /J DS C S J 100 JSD 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) 500
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
1200
1600
Flow rate (l/min(ANR))
600
Pressure (MPa)
0.7
Flow rate (l/min(ANR))
Cylinder tube I.D.
800
0
Flow rate (l/min(ANR))
S 12 3 / N
0.9
1600
Max. ø63mm
10 -03 12-03 3/8-N3 1/2-N3
1000
0
600
1200
Flow rate (l/min(ANR))
Cylinder tube I.D.
Control flow
Flow rate (l/min(ANR))
8-03 10-03 5/16-N3 3/8-N3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
Pressure (MPa)
Max. ø63mm
0.1
Pressure (MPa)
0
Flow rate (l/min(ANR))
Cylinder tube I.D.
JSDC 8-03
0.3 100
1200
JSDC 6-03 1/4 N
0.5
200
Pressure (MPa)
Max. ø40mm
0.7
300
Pressure (MPa)
Cylinder tube I.D.
Flow rate (l/min(ANR
8-02 10-02 1/4-02 5/16-02 3/8-02
Flow rate (l/min(ANR))
8-02 10-02 1/4-02 5/16-02 3/8-02
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
2500 2000 1500 1000 500
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa)
9
2016 NEW PRODUCTS
Detailed Safety Instructions Warning 1. When controlling the speed of actuators, slowly release the air by adjusting the needle from a fully closed state. In case the needle is opened, actuator can move suddenly. Turn needle in the clockwise direction to close, and in the counterclockwise to open. 2. Do not swing or rotate resin body of the products by force. It may damage to the products and cause a fluid leakage. 3. Flow rate may be changed by needle rotation when using slot-head speed controller at the place having vibrations or shocks. Use conventional speed controller having lock-nut on the needle. 4. Although the speed controller is equipped with retaining structure of fully opened needle, excessive rotation of the needle may cause a breakage. Check the allowable number of needle rotation of the controller. Caution 1. Slot-head speed controller is designed to tolerate some air leakage. Do not use the products for the application which requires no leakage. 2. As for Push-in fitting, the functional part where tube is inserted may slightly slide due to an internal pressure change and this may generate dusts. Avoid using the products in the clean room of ISO class from 1 to 5. Under the vibrating condition, check the amount of dust generated from the fitting and tubes, by using actual facilities.
OVERSEAS SALES PROMOTION TEAM 3884-1 MINAMIMINOWA, KAMIINA, NAGANO-PREF., 399-4588 JAPAN TEL : +81-(0)265-76-7751 FAX : +81(0)265-76-3305 URL : en.pisco.co.jp/
10
● The
E-mail : [email protected]
specifications are subject to change without advance notice.
>>>http://en.pisco.co.jp/ 2016.11.PDF
Q Troubled by unintended setting change ？ A
Slot-head Speed Controller JSD can help you!
It prevents unnecessary manual operations during the adjustment. Design without an external needle for speed adjustment. Use a slot screwdriver to adjust the needle.
Approx. 2/3 height of the conventional speed controller.* Suitable for a small space.
Compact piping!
*Compared to the max. height of the conventional speed controller.
Rotation of the resin body
Specif i cations
2 types are available.
Rotation of the resin body
Type
Elbow・Free
Fluid medium
360°rotatable resin body (Elbow type). 360°rotatable resin body and push-in fitting part (Free type). Free direction for piping.
Air
Operating pressure range
14.5～130psi (0.1 ～ 0.9MPa)
Check valve opening pressure
7.25psi (0.05MPa)
Operating temp. range
F (0 ～60℃ ) 32 ～140°
Rotation of the push-in fitting part
Rotation of the resin body Rotation of the resin body
Elbow type
Construction ⑩ ⑦
⑤①
②
⑥ ⑧ ⑨
③ ④ Tube end Sealock-coated
No. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
Parts name Lock claws Release ring Tube Guide ring Elastic sleeve O-ring Metallic body *1 Resin body Diaphragm Needle
Rotation of type the push-in Free fitting part
Material Stainless steel POM Polyurethane or nylon Nickel-plated brass NBR NBR Nickel-plated brass PBT HNBR Nickel-plated brass
*1. Metallic body with M3 thread : Special stainless steel (Austenite or ferritic stainless steel with SUS303 equivalent corrosivity) *2. Gasket for metric thread : SUS304+NBR or SPCC+NBR for standard spec. POM for cleanroom packaging.
2016 NEW PRODUCTS
Model designation (Example) JSD C 1/4 - N1 A U ①
②
③
④
Slot-head speed controller
④ .Control direction Code
A
B
Control direction
Meter-out control
Meter-in control Free flow
Control flow
Solenoid valve
Single acting cylinder
Solenoid valve
Cylinder Control flow
Free flow
Speed controller
Speed controller
Air from thread side is controlled. Air from tube side is not controlled and flows out from thread side.
Air from tube side is controlled. Air from thread side is not controlled and flows out from tube side.
Grooved markings on three points on its upper plug, and a JIS symbol on its resin body.
Metric thread
No marking
Grooved markings (Three points)
JIS symbol
Identification
JIS symbol
A or B marking on its upper plug and a JIS symbol on its resin body.
Taper pipe thread
Marking (A)
Marking (B)
JIS symbol
JIS symbol
③ .Thread size （R） Metric thread Code
M3
M5
Taper pipe thread 01
02
03
NPT thread
Unified thread
04
U10
N1
N2
N3
N4
Thread size M3×0.5 M5×0.8 R1/8 R1/4 R3/8 R1/2 No.10-32UNF NPT1/8 NPT1/4 NPT3/8 NPT1/2
②.Tube dia. （øD） mm size Code Tube O.D. （㎜）
4
6
8
10
12
1/8
1/4
5/16
3/8
ø3
ø4
ø6
ø8
ø10
ø12
ø3.2
ø6.35
ø7.94
ø9.53
①． Type C：Elbow S：Free
2
inch size
3
Slot-head Speed Controller
How to adjust the speed Use a slot screwdriver to adjust the speed of actuators with slot-head speed controller. Refer to the table below for size of slot screwdrivers. ●The tip of a slot screwdriver
A Max. thickness of the applicable slot screwdriver tip（㎜） M3×0.5, M5×0.8, U10 0.7 Thread size（R）
A
B
B Max. width of the applicable slot screwdriver tip（㎜） 3.5
01, N1
0.8
4
02, N2
1.2
5
03, N3
1.2
7
04, N4
1.6
11
① .Increasing speed
② .Reducing speed
Turn the needle in the
Turn the needle in the
counterclockwise direction
clockwise direction to reduce
from a fully closed state to
the speed of an actuator.
increase the speed of an actuator.
How to insert and disconnect 1. How to insert and disconnect tubes ① .Tube insertion
② .Tube disconnection
Insert a tube into Push-In
The tube is disconnected
Fitting up to the tube end.
by pushing release-ring
Lock-claws bite the tube and
to release Lock-claws.
fix it automatically, then the
Make sure to stop air
elastic sleeve seals around
supply before the tube
the tube.
disconnection.
2. How to tighten thread Use a spanner to tighten a hexagonal-column. When tightening thread, refer to the table below. Thread type Metric thread
Taper pipe thread
Thread size
Tightening torque
M3×0.5 M5×0.8
0.7N･m 1 ~ 1.5N･m
R1/8
4.5 ~ 6.5N･m
R1/4
7 ~ 9N･m
R3/8
12.5 ~ 14.5N·m
R1/2
20 ~ 22N·m
3
2016 NEW PRODUCTS
JSDC Elbow（mm - R, inch - R）
øG
øX Y
F
X
Release ring Mini øG: 3 ∼6, 1/8
E
Hex.
Release ring Standard
B L1 L2 A
A
øP1
B L1 L2
øD
C
R
øP2
R
Metric thread
Unit：mm Model code JSDC3-M3 ♶ ₅ JSDC3-M5 ♶ ₅
Tube O.D. øD 3
JSDC4-M3 ♶ ₅ JSDC4-M5 ♶ ₅
4
B
L1
L2
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6[6.9] M5×0.8 2.9[3.2] 22.2 M5×0.8 2.9[3.2] 22.2 R1/8
JSDC6-M5 ♶ ₅ JSDC6-02 ♶ ₅
A
19.3 [19] 6.7 [6.4]
8
28.4
19.3 [19] 6.7 [6.4] 24.4
8
M5×0.8 2.9[3.2] 22.2 19.3 [19] 7.5[7.2] 6
R1/8
8
28.4
24.4
10.7
R1/4
11.1
33
27
11.9
R3/8
13.2
38.9
32.6
15.4
JSDC8-01 ♶ ₅
R1/8
8
28.4
24.4
11.9
R1/4
11.1
33
27
13.2
R3/8
13.2
38.9
32.6
15.4
JSDC8-03 ♶ ₅
8
10.7
JSDC6-03 ♶ ₅ JSDC8-02 ♶ ₅
øP1 øP2
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6[6.9]
JSDC4-01 ♶ ₅ JSDC6-01 ♶ ₅
R
8
9.8 9.8
Tube end C 11
E
15.4 0.7
10
9.8
17.5 0.7
3.5
8
4
10
5
16
22
20.2 17
18.4 22
18.1
29
7
19
4
10
28.4
5
16
7
19
28.9
16
47.2
39
18
28
31
11.1
33
27
14.8
18.4
30.9
R3/8
13.2
38.9
32.6
16.7
R1/2
16
47.2
39
18
R3/8
13.2
38.9
32.6
18.4
R1/2
16
47.2
39
19.7
JSDC12-03 ♶ ₅ JSDC1/8-M3 ♶₅ JSDC1/8-M5 ♶₅
12 1/8
JSDC1/4-M5 ♶₅ JSDC1/4-01 ♶₅
1/4
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6[6.9] M5×0.8 2.9[3.2] 22.2
19.3 [19] 6.7 [6.4]
M5×0.8 2.9[3.2] 22.2
19.3 [19] 8.4 [8.1]
22
20.2 31.2
28 21 8
22 28 9.8
1.2
26.9 0.8
R1/2
JSDC12-04 ♶ ₅
7.8
4
R1/4
JSDC10-04 ♶ ₅
9.8
8
17.7 0.8
14.4
17.6
3.5
14.4
JSDC8-04 ♶ ₅ 10
Y
8
18.4
14.4
X (øX )
3.5
10.5 14.4 11.6 18.3 0.8 14.4
øG Hex.
15.4 0.7
11
JSDC10-02 ♶ ₅ JSDC10-03 ♶ ₅
F
1.2 1.6 1.2
23.4 11
9.8
7
19
36.4 1.6
11
24
15.4 0.7
3.5
8
3.5
8
24.4
10.9
12.4 14.4
23.5 0.8
4
10
33
27
12.2
18.4
25.5 1.2
5
16
R1/8
8
28.4
24.4
11.9
14.4
26.9 0.8
R1/4
11.1
33
27
13.2
JSDC5/16-03 ♶₅
R3/8
13.2
38.9
32.6
15.4
22
28.9
JSDC3/8-02 ♶₅
R1/4
11.1
33
27
14.8
18.4
30.9
R3/8
13.2
38.9
32.6
16.7
JSDC3/8-03 ♶₅
3/8
17.6
22
20.2
31.2
1.2
1,440
7
1,150
1,330
16
1,350
1,560
37
1,450
1,670
63
1,850
2,130
19
1,450
1,670
40
1,550
1,790
64
1,950
2,250 2,420
36.9 1.2
1.2
1,100
1,250
2,020
19
14.4 18.4 18.1 28.4
950
16
2,100
28.4
5/16
6.3
1,750
8
JSDC5/16-02 ♶₅
1,100 1,580
43
11.1
JSDC5/16-01 ♶₅
-
950 1,370
113
R1/4
17
13.8
6.3 5.6
24
R1/8
JSDC1/4-02 ♶₅
-
1,580
16 24
0.7
9.8
1,370
5 7
24
11.8
7.8
5.6
11
11
33.6 1.6
9.8
Weigh List price (JPY) (g) Std. Cleanroom
4
10
5
16
16.8
-
19.8
-
9.8
7.8
11.8
13.8
-
-
67
1,950
2,250
116
2,200
2,530
70
2,150
2,480
119
2,250
2,590
5.7
1,370
1,580
6.4
950
1,100
8.5
1,150
1,330
18
1,350
1,560
38
1,450
1,670
19
1,450
1,670
40
1,550
1,790
7
19
63
1,950
2,250
5
16
43
1,750
2,020
7
19
67
1,950
2,250
16.8
-
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [ ] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm). *6. List price of Light-Gray spec. is as the one of Standard spec, and Cleanroom & Light-Gray spec is same as Cleanroom spec.
4
Slot-head Speed Controller
JSDC Elbow(inch- NPT）
øG
øX Y
F
X
Release ring Mini øG: 1/8, 5/32
E
Hex.
Release ring Standard
øP2
B L1 L2 A
A
øP1
B L1 L2
øD
C
R
R
Unified thread
Unit：mm Model code
Tube O.D. øD
JSDC1/8-U10 ♶ U
1/8
R
A
B
L1
L2
øP1 8
No.10-32UNF
2.9
22.2
19.3
6.7
No.10-32UNF
2.9
22.2
19.3
6.7
1/8-27NPT
8
28.4
24.3
10.6
No.10-32UNF
2.9
22.2
19.3
8.4
1/8-27NPT
8
28.4
24.3
10.8
1/4-18NPT
11.1
33
27.2
12.4
JSDC1/4-N3 ♶ U
3/8-18NPT
13.2
38.9
32.8
15.6
JSDC5/16-N1 ♶ U
1/8-27NPT
8
28.4
24.3
11.8
1/4-18NPT
11.1
33
27.2
13.4
3/8-18NPT
13.2
38.9
32.8
15.6
1/2-14NPT
16
47.2
39.1
18
1/4-18NPT
11.1
33
27.2
15
3/8-18NPT
13.2
38.9
32.8
16.9
JSDC5/32-U10 ♶ U JSDC5/32-N1 ♶ U
5/32
JSDC1/4-U10 ♶ U JSDC1/4-N1 ♶ U JSDC1/4-N2 ♶ U
JSDC5/16-N2 ♶ U JSDC5/16-N3 ♶ U
1/4
5/16
JSDC5/16-N4 ♶ U JSDC3/8-N2 ♶ U JSDC3/8-N3 ♶ U
3/8
8
Tube end øP2 C 9.8 9.8 14.4
11 11
9.8 12.4
14.4 18.4
14.4
14.4
17
22
7.8
5/16 5/16
17.7
0.8
4
7/16
24
0.7
3.5
5/16
23.5
0.8
4
7/16
5
5/8
25.5
28.4 28.9 30.9
20.2
9.8
3.5 3.5
31
18.4
Y
0.7
29
22
Hex.
0.7
26.9 18.1
øG
15.4
22 18.4
F
15.4
14.4
28 17.6
E
X (øX )
31.2
1.2 0.8 1.2 1.6 1.2
9.8
11.8
7.8
-
Weigh List price (g) (JPY) 6.3
950
6.6
950
17
1,250
8.4
1,150
19
1,350
38
1,450
7
3/4
64
1,850
4
7/16
20
1,450
5
5/8
40
1,550
7
3/4
11
1
5
5/8
7
3/4
13.8
16.8
-
-
64
1,950
118
2,100
43
1,750
67
1,950
JSDC3/8-N4 ♶ U
1/2-14NPT
16
47.2
39.1
18
28
33.6
1.6
11
1
121
2,200
JSDC1/2-N3 ♶ U
3/8-18NPT
13.2
38.9
32.8
18.6
22
37.2
1.2
7
3/4
70
2,150
1/2-14NPT
16
47.2
39.1
19.7
36.7
1.6
11
1
123
2,250
JSDC1/2-N4 ♶ U
1/2
21
28
23.7
19.8
-
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm).
5
2016 NEW PRODUCTS
JSDS Free（mm - R, inch - R）
F
øG
X
øX
E Release ring Mini øG : 3 ∼6, 1/8
C L3
øP1
Release ring Standard
A
A
B L1 L2
B L1 L2
Hex.
Y
øD
R
øP2
R
Metric thread
Unit：mm Model code JSDS3-M3 ♶ ♷ JSDS3-M5 ♶ ♷
Tube O.D. øD 3
JSDS4-M3 ♶ ♷ JSDS4-M5 ♶ ♷
A
4
L1
L2
M3×0.5 2.5 [2.2] 21.7 19.2[19.5] 6.6 [6.9] M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4]
L 3 øP1 øP2 16.1
M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4] 16.1 R1/8
JSDS6-M5 ♶ ♷
8
8
28.4
24.4
8
10.7
M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4] R1/8
8
JSDS6-02 ♶ ♷
R1/4
11.1
JSDS8-01 ♶ ♷
R1/8
8
R1/4
11.1
JSDS8-02 ♶ ♷
B
M3×0.5 2.5 [2.2] 21.7 19.2[19.5] 6.6 [6.9]
JSDS4-01 ♶ ♷ JSDS6-01 ♶ ♷
R
6
8
28.4
9.8 9.8
Tube end C
E
F
11
10
0.7
11
10
10.5 0.7
3.5
8
4
10
950
1,100
16
1,250
1,440
7.5
1,150
1,330
17
1,350
1,560
18.4
14.7 1.2
5
16
37
1,450
1,670
10.7
14.4
15.5 0.8
4
10
20
1,450
1,670
33
27
11.9
5
16
41
1,550
1,790
14.5 18.4 18.1 17.5
15.6
27.7
22
20
11.9
29
18.4
18
R3/8
13.2
38.9
32.6
15.6
30
R3/8
13.2
38.9
32.6
15.6
33.7
R1/2
16
47.2
39
18
35.2
M3×0.5 2.5 [2.2] 21.7 19.2 [19.5] 6.6 [6.9] M5×0.8 2.9 [3.2] 22.2 19.3 [19] 6.7[6.4]
16.1
17.5 21 8
22 22 28 9.8
20.2 23.4 11
9.8
M5×0.8 2.9 [3.2] 22.2 19.3 [19] 8.2 [7.9]
1.2
-
7
19
65
1,950
2,250
5
16
44
1,750
2,020
7
19
21
1.2
7
19
25
1.6
11
24
10
13.8
0.7
3.5
8
14.3 0.7
3.5
8
16.8 19.8
-
9.8 7.8
2,250 2,480
122
2,250
2,590
6.1
1,370
1,580
6.8
950
1,100
9.5
1,150
1,330
8
28.4
24.4
10.7
23 12.4 14.4
15.5 0.8
4
10
19
1,350
1,560
11.1
33
27
11.9
18.4
17.5 1.2
5
16
39
1,450
1,670
JSDS5/16-01 ♶ ♷
R1/8
8
28.4
24.4
10.7
14.4
15.5 0.8
4
10
20
1,450
1,670
R1/4
11.1
33
27
11.9
41
1,550
1,790
R3/8
13.2
38.9
32.6
15.6
65
1,950
2,250
5/16
JSDS3/8-02 ♶ ♷ JSDS3/8-03 ♶ ♷
3/8
14.5 18.4 18.1 17.5
27.7
R1/4
11.1
33
27
11.9
29
R3/8
13.2
38.9
32.6
15.6
30
22 17.5
18.4 22
20 20.2
18 20.5
1.2 1.2
5
16
7
19
5
16
7
19
13.8
16.8
-
1,950 2,150
R1/4
JSDS5/16-03 ♶ ♷
11.8
68 72
R1/8
25.7
17
20.5
1.2
JSDS1/4-02 ♶ ♷ JSDS5/16-02 ♶ ♷
1/4
6.7
11.9 25.7
11.8 9.8
1,100 1,580
27
27
JSDS1/4-01 ♶ ♷
9.8 7.8
950 1,370
24.4 32.6
JSDS1/4-M5 ♶ ♷
6
1,580
33
33
JSDS1/8-M5 ♶ ♷
6.8
1,370
28.4 38.9
1/8
10
9.8
17.5 10.5 14.4 11.6 12.7 0.8
13.2
JSDS1/8-M3 ♶ ♷
8
6.1
10.7
11.1
12
3.5
Y
24.4
R3/8
JSDS12-04 ♶ ♷
9.8 7.8
8
4
R1/4
JSDS12-03 ♶ ♷
3.5
12.2 0.8
JSDS10-02 ♶ ♷
10
X (øX )
14.4
JSDS8-03 ♶ ♷ JSDS10-03 ♶ ♷
0.7
øG Hex.
Weigh List price (JPY) (g) Std. Cleanroom
-
-
44
1,750
2,020
68
1,950
2,250
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. ♷ in model code : Replaced with "W" for Light-Gray, "-C" for Cleanroom package, and "W-C" for Cleanroom & Light-Gray. *3. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *4. Value in [ ] is for cleanroom packaging. *5. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm). *6. List price of Light-Gray spec. is as the one of Standard spec, and Cleanroom & Light-Gray spec is same as Cleanroom spec.
6
Slot-head Speed Controller
JSDS Free (inch- NPT）
F
øG
X
øX
E
Hex.
Release ring Mini øG : 1/8, 5/32
Release ring Standard
A
A
B L1 L2
B L1 L2
C L3
øP1
Y
øD
R
øP2
R
Unified thread
Unit：mm Model code
Tube O.D. øD
JSDS1/8-U10 ♶ U
1/8
JSDS5/32-U10 ♶ U JSDS5/32-N1 ♶ U
5/32
JSDS1/4-U10 ♶ U JSDS1/4-N1 ♶ U
R
A
1/8-27NPT
8
1/4
1/8-27NPT
8
1/8-27NPT 5/16
JSDS5/16-N3 ♶ U
JSDS1/2-N3 ♶ U JSDS1/2-N4 ♶ U
L3
28.4 24.3 10.6
16.1
øP1
8 8
No.10-32UNF 2.9 22.2 19.3 8.2
JSDS5/16-N1 ♶ U
JSDS3/8-N3 ♶ U
L2
No.10-32UNF 2.9 22.2 19.3 6.7 16.1
1/4-18NPT 11.1
JSDS3/8-N2 ♶ U
L1
No.10-32UNF 2.9 22.2 19.3 6.7
JSDS1/4-N2 ♶ U JSDS5/16-N2 ♶ U
B
8
1/4-18NPT 11.1
28.4 24.3 10.6 33 33
27.2 12.1
23
1/2
1/4-18NPT 11.1
25.7
27.2 12.1
29
3/8-18NPT 13.2 38.9 32.8 15.9
30
3/8-18NPT 13.2 38.9 32.8 15.9
34
1/2-14NPT
16
33
14.4
12.4 14.4
11 11
47.2 39.1 18.1 35.5
E
21
øG
10
0.7
3.5 5/16 9.8
0.7
3.5 5/16
12.2 0.8 14.3 0.7
4
7/16
9.8
15.5 0.8
4
7/16 11.8
17.5 1.2
5
5/8
14.4
15.5 0.8
4
7/16
5
5/8
7
3/4
17
18.4 22 22 28
20 20.2 23.7
18 20.5
1.2 1.2
Y
7.8 7.8
3.5 5/16
18.4
22 17.5
F
X Hex. (øX )
10
14.5 18.4 18.1 17.5
3/8-18NPT 13.2 38.9 32.8 15.9 27.7 3/8
9.8 9.8 9.8
27.2 12.1
28.4 24.3 10.6
Tube end øP2 C
5
5/8
7
3/4
21
1.2
7
3/4
25
1.6
11
1
13.8
-
-
16.8
-
19.8
-
Weigh List price (g) (JPY)
6.8
950
7
950
17
1,250
9.5
1,150
20
1,350
39
1,450
21
1,450
41
1,550
66
1,950
44
1,750
69
1,950
72
2,150
127
2,250
*1. ♶ in model code : Replaced with "A" for Meter-out, "B" for Meter-in. *2. "L1" and "L2" are reference values for height dimensions after tightening a taper thread. *3. Dimension F represents max. thickness of the applicable slot screwdriver tip, and dimension G represents max. width of the applicable slot screwdriver tip (mm).
7
2016 NEW PRODUCTS
JSDS 6-01 8-01 1/4-N1 5/16-N1 Cylinder tube I.D. Max. ø32mm
6-02 6-02 8-02 8-02 10-02 10-02 1/4-N2 1/4-N2 5/16-N2 5/16-N2 3/8-N2 3/8-N2 Cylinder tube I.D. Max. ø40mm
8
JSDC 6-03
0.5 0.3
6
0.7 0.5
100
0.3
50
0.1
1
2
3
4 5 6 7 8 Needle rotations
250
0.7
200
0.5
150 100
0.3
50
0.1
400
1
2
3
4 5 6 7 8 Needle rotations
0.7 0.5
200
0.3 100
1200
40 20
0.1
Control flow
150 100 50
450 400 350 300 250 200 150 100 50
600 500 400 300 200 100
1200
1000
0.9
800
0.7
Free flow
200
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure(MPa)
250
700
0.9
Free flow
60
0
9 10 11 12
Control flow
300
0
Flow rate (l/min(ANR))
0.9
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa)
80
0
9 10 11 12
Control flow
0 0
10
300 0.9
0
30 20
0
7
Control flow
150
300
Pressure (MPa)
0.1
3 4 5 Needle rotations
40
100 Flow rate (l/min(ANR))
0.7
Free flow
70 60 50
0
7
0.9
200
0
6
Flow rate (l/min(ANR))
Flow rate (l/min(ANR))
3 4 5 Needle rotations
Flow rate (l/min(ANR))
JSDC 4-01 6-01 8-01 5/32-N1 1/4-N1 5/16-N1
0.1
250
Flow rate (l/min(ANR))
Max. ø25mm
Flow rate (l/min(ANR))
Cylinder tube I.D.
300
ANR))
JSDS 4-01 5/32 N1
0.3
Flow rate (l/min(ANR))
Max. ø20mm
0.5
(ANR))
Cylinder tube I.D.
Control flow 100 90 80 70 60 50 40 30 20 10 0 0 1 2
0.7
Pressure (MPa)
JSDS
0.9
Pressure (MPa)
JSDC 3-M5 4-M5 6-M5 1/8-U 10 5/32-U 10 1/4-U 10
Flow rate (l/min(ANR))
Max. ø16 mm
80
Pressure (MPa)
Cylinder tube I.D.
Control flow 100 90 80 70 60 50 40 30 20 10 0 0 1 2
Pressure (MPa)
JSDS 3-M3 4-M3 1/8-M3
Pa)
JSDC 3-M3 4-M3 1/8-M3
Flow rate (l/min(ANR))
Flow characteristic (Reference)
1000 800
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
4) 1/ ( 6
,8 01
6) /1 (5
01
-01
C4
D JS
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
)/8 , 02 0(3 ) 1 /4 2, (1 ) - 0 6 6 2 DC 5/1 ) -0 JS S8( /4 1 ( D 6 JS DS C/ JS D JS
02
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
Max. ø63mm
0.5
400
0.3
200
0.1
JSDC 10-04 JSDS 12-04 12-04 4 4
Cylinder tube I.D. Max. ø100mm
Flow rate (l/min(ANR))
Max. ø80mm
0.3
0.7 0.5 0.3
400
0.1
Control flow
0.7 0.5
800
0.3
400
3000 2500
0.1
Control flow
0.7
1500
0.5
1000
0.3
500
0.1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
Free flow
1000 800 600 400 200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
1200 1000 800 600 400 200
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
1400 1200 1000 800 600 400 200
3000 0.9
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa)
1200
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
2000
0
200
1600 0.9
1200
400
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
1600
600
1400
0.9
800
800
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations Control flow
1200
0
Flow rate (l/min(ANR
Pressure (MPa)
0.1
Flow rate (l/min(ANR))
0.5
400
0
Flow rate (l/min(ANR))
Cylinder tube I.D.
0.9
Free flow
1000
1400
0.7
2000
JSDC 8-04 5/16 N
Control flow
800
0 ), 3/ 8 2 ( -0 0 4 ) ,1 400 1/ ) - 02 ( Slot-headC6Speed 6 2Controller D 5/1 -0 300 JS S8( 4) / 1 6( 200 SD /J DS C S J 100 JSD 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) 500
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
1200
1600
Flow rate (l/min(ANR))
600
Pressure (MPa)
0.7
Flow rate (l/min(ANR))
Cylinder tube I.D.
800
0
Flow rate (l/min(ANR))
S 12 3 / N
0.9
1600
Max. ø63mm
10 -03 12-03 3/8-N3 1/2-N3
1000
0
600
1200
Flow rate (l/min(ANR))
Cylinder tube I.D.
Control flow
Flow rate (l/min(ANR))
8-03 10-03 5/16-N3 3/8-N3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 Needle rotations
Pressure (MPa)
Max. ø63mm
0.1
Pressure (MPa)
0
Flow rate (l/min(ANR))
Cylinder tube I.D.
JSDC 8-03
0.3 100
1200
JSDC 6-03 1/4 N
0.5
200
Pressure (MPa)
Max. ø40mm
0.7
300
Pressure (MPa)
Cylinder tube I.D.
Flow rate (l/min(ANR
8-02 10-02 1/4-02 5/16-02 3/8-02
Flow rate (l/min(ANR))
8-02 10-02 1/4-02 5/16-02 3/8-02
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa) Free flow
2500 2000 1500 1000 500
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Pressure (MPa)
9
2016 NEW PRODUCTS
Detailed Safety Instructions Warning 1. When controlling the speed of actuators, slowly release the air by adjusting the needle from a fully closed state. In case the needle is opened, actuator can move suddenly. Turn needle in the clockwise direction to close, and in the counterclockwise to open. 2. Do not swing or rotate resin body of the products by force. It may damage to the products and cause a fluid leakage. 3. Flow rate may be changed by needle rotation when using slot-head speed controller at the place having vibrations or shocks. Use conventional speed controller having lock-nut on the needle. 4. Although the speed controller is equipped with retaining structure of fully opened needle, excessive rotation of the needle may cause a breakage. Check the allowable number of needle rotation of the controller. Caution 1. Slot-head speed controller is designed to tolerate some air leakage. Do not use the products for the application which requires no leakage. 2. As for Push-in fitting, the functional part where tube is inserted may slightly slide due to an internal pressure change and this may generate dusts. Avoid using the products in the clean room of ISO class from 1 to 5. Under the vibrating condition, check the amount of dust generated from the fitting and tubes, by using actual facilities.
OVERSEAS SALES PROMOTION TEAM 3884-1 MINAMIMINOWA, KAMIINA, NAGANO-PREF., 399-4588 JAPAN TEL : +81-(0)265-76-7751 FAX : +81(0)265-76-3305 URL : en.pisco.co.jp/
10
● The
E-mail : [email protected]
specifications are subject to change without advance notice.
>>>http://en.pisco.co.jp/ 2016.11.PDF
