Planet Eclipse Etha Regulator Replacement
Planet Eclipse Etha Regulator Replacement
Planet Eclipse Etha Regulator Replacement This guide focuses on how to carefully remove and replace the Regulator of your Planet Eclipse Etha.
Written By: Jared Olson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Planet Eclipse Etha Regulator Replacement
INTRODUCTION Use this guide if your macroline or regulator broke or you chose to upgrade your regulator. Removing these parts also allows access to more of the marker's internal parts.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Planet Eclipse Etha Regulator Replacement
Step 1 — Regulator
Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.
Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.
The macroline is the black hose connecting the regulator to the tank connection. Step 2
Remove the regulator by unscrewing it in a clockwise direction.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Planet Eclipse Etha Regulator Replacement
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-13 10:49:04 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
Planet Eclipse Etha Regulator Replacement This guide focuses on how to carefully remove and replace the Regulator of your Planet Eclipse Etha.
Written By: Jared Olson
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
Planet Eclipse Etha Regulator Replacement
INTRODUCTION Use this guide if your macroline or regulator broke or you chose to upgrade your regulator. Removing these parts also allows access to more of the marker's internal parts.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
Planet Eclipse Etha Regulator Replacement
Step 1 — Regulator
Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.
Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.
The macroline is the black hose connecting the regulator to the tank connection. Step 2
Remove the regulator by unscrewing it in a clockwise direction.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
Planet Eclipse Etha Regulator Replacement
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-13 10:49:04 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
