Disassembling Planet Eclipse Geo3 Macroline
Disassembling Planet Eclipse Geo3 Macroline
Disassembling Planet Eclipse Geo3 Macroline Removing the macroline.
Written By: Rett Triplett
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Disassembling Planet Eclipse Geo3 Macroline
INTRODUCTION This is a guide to removing the macroline that connects the POPS and the regulator. This is necessary if the macroline is leaking or to disassemble the body.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Disassembling Planet Eclipse Geo3 Macroline
Step 1 — Macroline
Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
It helps to rotate the collar to create room to pull out macroline. Step 2
While pulling in the metal ring on the fitting, pull the macroline out.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:24:54 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Disassembling Planet Eclipse Geo3 Macroline Removing the macroline.
Written By: Rett Triplett
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Disassembling Planet Eclipse Geo3 Macroline
INTRODUCTION This is a guide to removing the macroline that connects the POPS and the regulator. This is necessary if the macroline is leaking or to disassemble the body.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Disassembling Planet Eclipse Geo3 Macroline
Step 1 — Macroline
Remove the macroline from the fitting by pulling the metal ring around the end of the fitting away while pulling out the macroline.
It helps to rotate the collar to create room to pull out macroline. Step 2
While pulling in the metal ring on the fitting, pull the macroline out.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:24:54 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
