PLK/PLK WM - Alera Lighting
PLK/PLK WM Features
TURAL S
• Heavy 20-gauge construction provides excellent
AR
• Mounting to wall by universal wall bracket system.
housing rigidity; patented die cast aluminum joiners ensure excellent row integrity (Patent# 6,796,676B2)
SORS
CHIT
C
EN
E
Plank / Plank Wall Mount
Bracket is painted matte white unless otherwise specified. Additional aircraft cable support option available for wall mount (WMC). Note: WMC option is recommended for wall mount rows that are 8’ and longer
• One, two, or three T8, T5 or T5HO lamps in cross
Beams
section
• UL listed 1598. cUL or CSA. Damp location listed
• Optional distribution covers available to vary lamp
• Available with optional installed open or closed
distribution pattern
loop daylight sensors (DSPL, DSL) when daylight dimming systems are desired
• Optional perforated housing supplies perforated,
slotted, or patterned strips on either side of shielding for added visual interest
• Controls compatible for daylight harvesting and/or
occupancy sensors.
• Alera Express options available • Adjustable cable mount hanging system provides a
low profile appeal
Ordering Information
pLK
–
–
–
Model PLK Plank
Lamp TYPE & PROFILE 1T5 1 T5 Lamp 2T5 2 T5 Lamps 3T5 3 T5 Lamps 1T5HO 1 T5HO Lamp 2T5HO 2 T5HO Lamps 3T5HO 3 T5HO Lamps 1T8 1 T8 Lamp Row Length 2T8 2 T8 Lamps 4 4' Single 3T8 3 T8 Lamps 8 8' Single 12 12' Single Distribution — Indicate row Blank Standard length over 12' in 4' increments
–
Includes .020 thick white overlay. Specify voltage. For additional, specify quantity before nomenclature (Example: 2EL120). 3 Not available with all configurations; some limitations apply. Contact factory for details. 4 One extra feed drop per row for EMC/NLC. For through wiring, contact factory.
–
HOUSING TYPE Blank Solid (Std.) PFST Perforated Strip HSLT Horizontal Slot Strip
RPF
Strip
CLD Custom Laser
FPF OA A12
Cut Design Strip
IND Indirect only
housing (solid bottom)
Mounting method CM Adjustable Aircraft
1
–
Shielding WCB White Cross Baffle1 WCBS White Cross Baffle-
VSLT Vertical Slot
20/80 20% Uplight Reflector, 80% Downlight 6, 7 40/60 40% Uplight Reflector, 60% Downlight 6, 7 0/100 0% Uplight Reflector, 100% Downlight6, 7 85/15 85% Uplight Reflector, 15% Downlight6, 7 CLC Center Lamp Cover for A/V Mode 6, 7
Note: Rows over 12' will be configured by Alera. Example: 16' will be (2) 8'. Alternate configurations: contact factory.
–
Cable Mount (Std.)
LD
High Efficiency Without Standard Overlay Regressed Perforated Flat Perforated Opal Acrylic Lens Pattern 12 Acrylic Lens Low Iridescent Semi-Specular Louver
WM Wall Mount (4”
Other lengths available on request.
2
Lutron EcoSystem Series Ballast. Contact factory for other Lutron ballasts. Dustcover not available when using optical distribution covers. 7 Ships separately.
Cross Sections
277V
120 120V 277 277V 347 347V
Options
DC Dust Cover (T8 only) White LR Left/Right Switching (2-Lamp only) (Std.) IBOB Inboard/Outboard ZT ZET Switching (3-Lamp only) Silver EL One Emergency Battery Metallic Pack2, 3 Finish FO841 With T8 4100K Lamp See Color Installed Selection Guide T5/T5HO 4100K Lamp for other color F5841 With Installed selections. FO835 With T8 3500K Lamp Installed F5835 With T5/T5HO 3500K Lamp Installed EMC One Emergency Circuit 2, 3, 4
E Electronic, Instant Start (Std. for T8)
Suspension Length (CM) 48 48" 96 96"
6
–
Voltage Finish U 120V- MW Matte
Ballast
units only) WMC Wall Mount with Cable
5
–
EP Electronic, Programmed Start (Std. for T5 & T5HO, optional for T8) ELW Electronic T8, Low Wattage, Instant Start EPLW Electronic T8, Low Wattage, Programmed Start ED Electronic, Dimming (Must specify) ESD Electronic, Step Dimming EDUMK7 Universal Voltage, Electronic Dimming Philips Advance Mark 7 (0-10V) 3 EDULUTES Universal Voltage, Lutron EcoSystem Digital Dimming Ballast 3, 5 Unless specified, Alera will use fewest ballasts possible.
NLC GLR GMF TBAR DSPL
Night Light Circuit2, 3, 4 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting Philips LuxSense Daylight Sensor (Must Specify Philips Advance 0-10V Dimming Ballast) 3 DSL Lutron Daylight Sensor (Must Specify Lutron EcoSystem (EC5 Series) Dimming Ballast) 3, 5
Wall mount Cross Sections 2"
9⅞" 1 Lamp
8⅜" 2"
9⅞" 2 Lamps
2" ⅜" 10⅛" 1-Lamp Symmetric
For exact slot patterns contact factory. ⅜" 2-Lamp Symmetric
2" 9⅞" 3 Lamps Cross sections shown with T8 lamps; T5 or T5HO also available.
8⅜"
⅜" 10⅛" 3-Lamp Symmetric
2"
Name: Test #: Efficiency: LER:
PLK-2T8-PERF-WCB-E 13890 92% 80
Definitions on page 182.
Specifications subject to change without notice.
TURAL S
• Heavy 20-gauge construction provides excellent
AR
• Mounting to wall by universal wall bracket system.
housing rigidity; patented die cast aluminum joiners ensure excellent row integrity (Patent# 6,796,676B2)
SORS
CHIT
C
EN
E
Plank / Plank Wall Mount
Bracket is painted matte white unless otherwise specified. Additional aircraft cable support option available for wall mount (WMC). Note: WMC option is recommended for wall mount rows that are 8’ and longer
• One, two, or three T8, T5 or T5HO lamps in cross
Beams
section
• UL listed 1598. cUL or CSA. Damp location listed
• Optional distribution covers available to vary lamp
• Available with optional installed open or closed
distribution pattern
loop daylight sensors (DSPL, DSL) when daylight dimming systems are desired
• Optional perforated housing supplies perforated,
slotted, or patterned strips on either side of shielding for added visual interest
• Controls compatible for daylight harvesting and/or
occupancy sensors.
• Alera Express options available • Adjustable cable mount hanging system provides a
low profile appeal
Ordering Information
pLK
–
–
–
Model PLK Plank
Lamp TYPE & PROFILE 1T5 1 T5 Lamp 2T5 2 T5 Lamps 3T5 3 T5 Lamps 1T5HO 1 T5HO Lamp 2T5HO 2 T5HO Lamps 3T5HO 3 T5HO Lamps 1T8 1 T8 Lamp Row Length 2T8 2 T8 Lamps 4 4' Single 3T8 3 T8 Lamps 8 8' Single 12 12' Single Distribution — Indicate row Blank Standard length over 12' in 4' increments
–
Includes .020 thick white overlay. Specify voltage. For additional, specify quantity before nomenclature (Example: 2EL120). 3 Not available with all configurations; some limitations apply. Contact factory for details. 4 One extra feed drop per row for EMC/NLC. For through wiring, contact factory.
–
HOUSING TYPE Blank Solid (Std.) PFST Perforated Strip HSLT Horizontal Slot Strip
RPF
Strip
CLD Custom Laser
FPF OA A12
Cut Design Strip
IND Indirect only
housing (solid bottom)
Mounting method CM Adjustable Aircraft
1
–
Shielding WCB White Cross Baffle1 WCBS White Cross Baffle-
VSLT Vertical Slot
20/80 20% Uplight Reflector, 80% Downlight 6, 7 40/60 40% Uplight Reflector, 60% Downlight 6, 7 0/100 0% Uplight Reflector, 100% Downlight6, 7 85/15 85% Uplight Reflector, 15% Downlight6, 7 CLC Center Lamp Cover for A/V Mode 6, 7
Note: Rows over 12' will be configured by Alera. Example: 16' will be (2) 8'. Alternate configurations: contact factory.
–
Cable Mount (Std.)
LD
High Efficiency Without Standard Overlay Regressed Perforated Flat Perforated Opal Acrylic Lens Pattern 12 Acrylic Lens Low Iridescent Semi-Specular Louver
WM Wall Mount (4”
Other lengths available on request.
2
Lutron EcoSystem Series Ballast. Contact factory for other Lutron ballasts. Dustcover not available when using optical distribution covers. 7 Ships separately.
Cross Sections
277V
120 120V 277 277V 347 347V
Options
DC Dust Cover (T8 only) White LR Left/Right Switching (2-Lamp only) (Std.) IBOB Inboard/Outboard ZT ZET Switching (3-Lamp only) Silver EL One Emergency Battery Metallic Pack2, 3 Finish FO841 With T8 4100K Lamp See Color Installed Selection Guide T5/T5HO 4100K Lamp for other color F5841 With Installed selections. FO835 With T8 3500K Lamp Installed F5835 With T5/T5HO 3500K Lamp Installed EMC One Emergency Circuit 2, 3, 4
E Electronic, Instant Start (Std. for T8)
Suspension Length (CM) 48 48" 96 96"
6
–
Voltage Finish U 120V- MW Matte
Ballast
units only) WMC Wall Mount with Cable
5
–
EP Electronic, Programmed Start (Std. for T5 & T5HO, optional for T8) ELW Electronic T8, Low Wattage, Instant Start EPLW Electronic T8, Low Wattage, Programmed Start ED Electronic, Dimming (Must specify) ESD Electronic, Step Dimming EDUMK7 Universal Voltage, Electronic Dimming Philips Advance Mark 7 (0-10V) 3 EDULUTES Universal Voltage, Lutron EcoSystem Digital Dimming Ballast 3, 5 Unless specified, Alera will use fewest ballasts possible.
NLC GLR GMF TBAR DSPL
Night Light Circuit2, 3, 4 Fast Blow Fuse Slow Blow Fuse T-Bar Mounting Philips LuxSense Daylight Sensor (Must Specify Philips Advance 0-10V Dimming Ballast) 3 DSL Lutron Daylight Sensor (Must Specify Lutron EcoSystem (EC5 Series) Dimming Ballast) 3, 5
Wall mount Cross Sections 2"
9⅞" 1 Lamp
8⅜" 2"
9⅞" 2 Lamps
2" ⅜" 10⅛" 1-Lamp Symmetric
For exact slot patterns contact factory. ⅜" 2-Lamp Symmetric
2" 9⅞" 3 Lamps Cross sections shown with T8 lamps; T5 or T5HO also available.
8⅜"
⅜" 10⅛" 3-Lamp Symmetric
2"
Name: Test #: Efficiency: LER:
PLK-2T8-PERF-WCB-E 13890 92% 80
Definitions on page 182.
Specifications subject to change without notice.
