rc design & engineering amazonaws com
RIDGE R.L. 36.33 SELECTED ROOF TILES TO MANUFACTURER SPECIFICATIONS
22° EXTERIOR QUAD GUTTER FIRST FLOOR CEILING LEVEL R.L. 34.58 PRIVACY SCREEN
2.700
FACE BRICK FINISH PLANTER BOX
BLUBOARD PAINT FINISH
FIRST FLOOR LEVEL R.L. 31.88
EXISTING
GROUND CEILING LEVEL R.L. 31.68
GROUND LEVEL R.L. 29.18
2 8 6 5
WEST ELEVATION EXTENSION AREA
2
7
8
2
RIDGE R.L. 36.33
SELECTED ROOF TILES TO MANUFACTURER SPECIFICATIONS
22° EXTERIOR QUAD GUTTER
SELECTED TIMBER COLUMN
FIRST FLOOR LEVEL R.L. 31.88
15°
8.390
1.500
BLUBOARD PAINT FINISH
2.700
SELECTED ROOF TILES TO MANUFACTURER SPECIFICATIONS PRIVACY SCREEN
FIRST FLOOR CEILING LEVEL R.L. 34.58
GROUND CEILING LEVEL R.L. 31.68
FACE BRICK FINISH GROUND LEVEL R.L. 29.18
2
7
8
2 2
7
9
28 09
4
SOUTH ELEVATION EXTENSION AREA NOTES AND INSTRUCTIONS: The contractor and / or subcontractors shall be responsible for all levels and dimensions prior to commencing on site or off site constructions and / or fabrications. These drawings must not be scaled. These drawings are dimensioned in ( mms).These drawings must be read in conjunction with all other drawings and / or instructions as may be issued during the course of the project.These drawings are copyright and must not be retained, copied, developed or amended without a written consent from RCO ENGINEERING..All works resulting of these drawings are to be in accordance with 1- The Building Code of Australia. 2- All codes and regulations of LOCAL AUTHORITY REQUIREMENTS. 3- All related Trades Australian Strandards. These drawings are site specific and can only be used for the address as listed in these drawings.
Project: SECOND STOREY ADDITION Client: JAMAL BEKDACHE GSPublisherVersion 0.0.100.100
City Council: Canterbury DP: 213644 Lot: 1 Zoning: R3 Medium Density
Project address: No.: 51 Chelmsford Ave Suburb: Belmore
These drawings are site specific and can only be used for the address as listed in these drawings. 1. All works to be in accordance with the Building Code of Australia, Australian Standards, statutory regulations and local authority requirements. 2. Consistency between similar materials to be maintained. RCO Engineering to be notified of any discrepencies, dimensional inconsistencies or the need for clarification prior to manufacture. 3. RCO Engineering to approve all detailed drawings/setting out prior to construction. 5. Contractors to confirm stability and leasability of all units/components prior to manufacture. 6. All drawing measurements to be verified on site - do not scale from documents. 7.Refer to, and read this document in conjunction with Specification or any other plans such as structural, hydraulic and electrical (if applicable) for further information.
REVISIONS DATE COMMENTS
Issue date 17/11/2015
R C DESIGN & ENGINEERING
ARCHITECTS . ENGINEERS . PLANNERS . DESIGNERS . PROJECT MANAGERS. LANDSCAPERS SUITE 11/46-48 RESTWELL St BANKSTOWN 2200 TEL: 0452 520 002
PROPOSED ELEVATIONS 2
Electronic file name /SECONDSTOREYADDTION/PRIVATE.FILE
N
scale: Dwg.No. 09
1:100
Designed by: Drawn by:
R.C R.C.
Checked by:
R.O.
22° EXTERIOR QUAD GUTTER FIRST FLOOR CEILING LEVEL R.L. 34.58 PRIVACY SCREEN
2.700
FACE BRICK FINISH PLANTER BOX
BLUBOARD PAINT FINISH
FIRST FLOOR LEVEL R.L. 31.88
EXISTING
GROUND CEILING LEVEL R.L. 31.68
GROUND LEVEL R.L. 29.18
2 8 6 5
WEST ELEVATION EXTENSION AREA
2
7
8
2
RIDGE R.L. 36.33
SELECTED ROOF TILES TO MANUFACTURER SPECIFICATIONS
22° EXTERIOR QUAD GUTTER
SELECTED TIMBER COLUMN
FIRST FLOOR LEVEL R.L. 31.88
15°
8.390
1.500
BLUBOARD PAINT FINISH
2.700
SELECTED ROOF TILES TO MANUFACTURER SPECIFICATIONS PRIVACY SCREEN
FIRST FLOOR CEILING LEVEL R.L. 34.58
GROUND CEILING LEVEL R.L. 31.68
FACE BRICK FINISH GROUND LEVEL R.L. 29.18
2
7
8
2 2
7
9
28 09
4
SOUTH ELEVATION EXTENSION AREA NOTES AND INSTRUCTIONS: The contractor and / or subcontractors shall be responsible for all levels and dimensions prior to commencing on site or off site constructions and / or fabrications. These drawings must not be scaled. These drawings are dimensioned in ( mms).These drawings must be read in conjunction with all other drawings and / or instructions as may be issued during the course of the project.These drawings are copyright and must not be retained, copied, developed or amended without a written consent from RCO ENGINEERING..All works resulting of these drawings are to be in accordance with 1- The Building Code of Australia. 2- All codes and regulations of LOCAL AUTHORITY REQUIREMENTS. 3- All related Trades Australian Strandards. These drawings are site specific and can only be used for the address as listed in these drawings.
Project: SECOND STOREY ADDITION Client: JAMAL BEKDACHE GSPublisherVersion 0.0.100.100
City Council: Canterbury DP: 213644 Lot: 1 Zoning: R3 Medium Density
Project address: No.: 51 Chelmsford Ave Suburb: Belmore
These drawings are site specific and can only be used for the address as listed in these drawings. 1. All works to be in accordance with the Building Code of Australia, Australian Standards, statutory regulations and local authority requirements. 2. Consistency between similar materials to be maintained. RCO Engineering to be notified of any discrepencies, dimensional inconsistencies or the need for clarification prior to manufacture. 3. RCO Engineering to approve all detailed drawings/setting out prior to construction. 5. Contractors to confirm stability and leasability of all units/components prior to manufacture. 6. All drawing measurements to be verified on site - do not scale from documents. 7.Refer to, and read this document in conjunction with Specification or any other plans such as structural, hydraulic and electrical (if applicable) for further information.
REVISIONS DATE COMMENTS
Issue date 17/11/2015
R C DESIGN & ENGINEERING
ARCHITECTS . ENGINEERS . PLANNERS . DESIGNERS . PROJECT MANAGERS. LANDSCAPERS SUITE 11/46-48 RESTWELL St BANKSTOWN 2200 TEL: 0452 520 002
PROPOSED ELEVATIONS 2
Electronic file name /SECONDSTOREYADDTION/PRIVATE.FILE
N
scale: Dwg.No. 09
1:100
Designed by: Drawn by:
R.C R.C.
Checked by:
R.O.
