Rittal. Power and Vision!
Catalog 33 North American Edition 2012
Rittal. Power and Vision!
Walls Isolator door locking Flange mount disconnect locking
For safety locking of enclosures and bayed suites in conjunction with up to 200A disconnect switches and up to 400A circuit breaker operating mechanisms.1)
Part No.
For TS
8611.310
Note: 8611.310 includes interlock activator (4912.000 [see below]). Included with master flange mount disconnect cabinet. 1) May work with some circuit braker operating mechanisms greater than 400A.
– Allen Bradley 1494 F-M1/P1/S1 and 140 U-K-FCX04 – Square D 9422 A1
Main door locking
Non-FMD door locking
– ITE Siemens Max-Flex series/FHOH
4
3
(only available in the USA)
4
3
1 Interlock activator, installation in enclosure with main switch
3
2 Adjacent door locking, installation in adjacent enclosure
– General Electric TDA Type 1 and 2 2
2
– Moeller NZM-XSHGVR 12-NA
1
2
To complete the assembly you must order 4911.000 (see below) and the required interconnecting rods for bayed suites.
3 Interconnecting rod 4 Connection component (included in the supply of interconnecting rod)
.562 (14.3)
.25 (7.1)
FMD door locking
4 11/16 (119.1)
)
1 (25.4)
2 7/16 (61.9
4
4
3
5
3
1 (25.4)
3
2
Cut-out for main switch
2
2
6
5 FMD main door lock 6 Interlock activator, installation in the main enclosure (included in the supply of the FMD main door lock position 5).
.5 (12.7)
Door interlocking for bayed suites
Part No. Interlock activator
For extending the door lock of commercially available main switches to TS bayed suites. Adjacent door cannot be opened until the main door has been opened. The main switch can be positioned anywhere in the suite; its function is independent from the door hinge position. Subsequent locking of the adjacent doors in the suite is possible: They are thus automatically included in locking operation. 1 Interlock activator
(Fitted in the enclosure with main switch and additionally in every fourth adjacent enclosure)
4912.000
Adjacent door locking
Part No.
1 Door
4911.000
2 Door
4911.100
For enclosure width inches (mm)
PU
Part No.
24 (600)
10
4916.000
32 (800)
10
4918.000
47 (1200)
10
4920.000
1
2
2 Adjacent door locking
(Installation in adjacent enclosure)
3 Interconnecting rods
To extend locking from the main enclosure to the adjacent enclosures of a bayed suite. An interconnecting rod corresponding to the width of the enclosure is required for each adjacent enclosure.
Rittal Catalog 33/System accessories
3
Metric measurements for are exact, imperial measurements are rounded
571
Rittal. Power and Vision!
Walls Isolator door locking Flange mount disconnect locking
For safety locking of enclosures and bayed suites in conjunction with up to 200A disconnect switches and up to 400A circuit breaker operating mechanisms.1)
Part No.
For TS
8611.310
Note: 8611.310 includes interlock activator (4912.000 [see below]). Included with master flange mount disconnect cabinet. 1) May work with some circuit braker operating mechanisms greater than 400A.
– Allen Bradley 1494 F-M1/P1/S1 and 140 U-K-FCX04 – Square D 9422 A1
Main door locking
Non-FMD door locking
– ITE Siemens Max-Flex series/FHOH
4
3
(only available in the USA)
4
3
1 Interlock activator, installation in enclosure with main switch
3
2 Adjacent door locking, installation in adjacent enclosure
– General Electric TDA Type 1 and 2 2
2
– Moeller NZM-XSHGVR 12-NA
1
2
To complete the assembly you must order 4911.000 (see below) and the required interconnecting rods for bayed suites.
3 Interconnecting rod 4 Connection component (included in the supply of interconnecting rod)
.562 (14.3)
.25 (7.1)
FMD door locking
4 11/16 (119.1)
)
1 (25.4)
2 7/16 (61.9
4
4
3
5
3
1 (25.4)
3
2
Cut-out for main switch
2
2
6
5 FMD main door lock 6 Interlock activator, installation in the main enclosure (included in the supply of the FMD main door lock position 5).
.5 (12.7)
Door interlocking for bayed suites
Part No. Interlock activator
For extending the door lock of commercially available main switches to TS bayed suites. Adjacent door cannot be opened until the main door has been opened. The main switch can be positioned anywhere in the suite; its function is independent from the door hinge position. Subsequent locking of the adjacent doors in the suite is possible: They are thus automatically included in locking operation. 1 Interlock activator
(Fitted in the enclosure with main switch and additionally in every fourth adjacent enclosure)
4912.000
Adjacent door locking
Part No.
1 Door
4911.000
2 Door
4911.100
For enclosure width inches (mm)
PU
Part No.
24 (600)
10
4916.000
32 (800)
10
4918.000
47 (1200)
10
4920.000
1
2
2 Adjacent door locking
(Installation in adjacent enclosure)
3 Interconnecting rods
To extend locking from the main enclosure to the adjacent enclosures of a bayed suite. An interconnecting rod corresponding to the width of the enclosure is required for each adjacent enclosure.
Rittal Catalog 33/System accessories
3
Metric measurements for are exact, imperial measurements are rounded
571
