Rittal. Power and Vision!

Catalog 33 North American Edition 2012

Rittal. Power and Vision!

Interior installation Rail systems Base configuration rail

for CM For mounting in the enclosure depth, on the existing threaded bolts, no machining required. TS system punchings on 2 sides. Creates additional installation options.

For enclosure depth inches (mm)

Packs of

Part No.

16 (400)

2

5001.370

12 (300)

2

5001.371

For enclosure depth inches (mm)

Packs of

Part No.

16 (400)

4

8612.240

Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly parts

TS punched rail 18 x 38 mm

Simply locate and secure with a screw. The location system makes assembly and dismantling easier. It only needs to be secured on one side, but may be secured on both sides if required. Installation options: – On the vertical TS enclosure section, on the outer mounting level – On the horizontal TS enclosure section – On base configuration rail for CM

20 (500)

4

8612.250

24 (600)

4

8612.260

32 (800)

4

8612.280

Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly screws Note: In enclosures with a mounting panel, 2 punched rails are already included with the supply. Accessories: − Screws, see page 674 − Cable tie for fast assembly 2597.000, see page 726 − Cable clamps, see page 723 Configuration examples: From page 645

Rittal Catalog 33/System accessories

Metric measurements for are exact, imperial measurements are rounded

655