Rittal. Power and Vision!

Catalog 33 North American Edition 2012

Rittal. Power and Vision!

Interior installation Rail systems Mounting plate Screw-fastened, small

Packs of

Part No.

4

4532.000

Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly screws Detailed drawings: Available at www.rittal.us

Mounting plate TS

with integral top-hat rail For direct snap-mounting of components such as speed control, enclosure internal thermostat and hygrostat.

Packs of

Part No.

1

7526.964

Material: Carbon steel Surface finish: Zinc-plated Configuration: Mounting plate (mounting accessories included)

Mounting bracket

May be screw-fastened onto all enclosures and mounting parts with system punchings on a 25 mm pitch pattern.

Packs of

Part No.

4

4597.000

Material: Carbon steel

Accessories: − Screws, see page 674 − Cable tie for fast assembly 2597.000, see page 723

Surface finish: Zinc-plated

Detailed drawings: Available at www.rittal.us

Configuration: Assembly screws

Mounting bracket

for interior installation For installing punched sections with mounting flanges and support strips in: – Comfort Panel horizontal/vertical from 2.9” (74 mm) installation depth or for installing in: – Optipanel from installation depth of 4” (100 mm) Material: Carbon steel

Packs of

Part No.

4

6205.100

Surface finish: Zinc-plated Configuration: Assembly parts Detailed drawings: Available at www.rittal.us Comfort Panel Front panel width 19” (482.6 mm)

Punched sections with mounting flanges Support strips

Rittal Catalog 33/System accessories

Horizontal Vertical Horizontal Vertical

8612.150 4695.000

Metric measurements for are exact, imperial measurements are rounded

Page 652 652 656 656 665