SodaStream Fountain Jet A200 Spring Replacement
SodaStream Fountain Jet A200 Spring Replacement
SodaStream Fountain Jet A200 Spring Replacement In the guide, the user will see how to replace a spring located underneath the carbonation button.
Written By: Katie Fetters
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
SodaStream Fountain Jet A200 Spring Replacement
INTRODUCTION This guide will be used to instruct a person how to replace the spring that controls the up and down motion of the carbonation button should it become worn over time.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
SodaStream Fountain Jet A200 Spring Replacement
Step 1 — removing back cover
Press in the two gray buttons found on either side, at the top of the machine.
Pull back on the cover until it releases from the device and pull the back off.
Step 2 — Carbonation button
Place your hand under the carbonation button and gently pull up and away from you, towards the back of the machine.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
SodaStream Fountain Jet A200 Spring Replacement
Step 3 — spring removal
Remove the spring located under the carbonation button.
Replace with the new spring, by lining it up and pushing it down.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-03 12:57:19 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
SodaStream Fountain Jet A200 Spring Replacement In the guide, the user will see how to replace a spring located underneath the carbonation button.
Written By: Katie Fetters
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 4
SodaStream Fountain Jet A200 Spring Replacement
INTRODUCTION This guide will be used to instruct a person how to replace the spring that controls the up and down motion of the carbonation button should it become worn over time.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 4
SodaStream Fountain Jet A200 Spring Replacement
Step 1 — removing back cover
Press in the two gray buttons found on either side, at the top of the machine.
Pull back on the cover until it releases from the device and pull the back off.
Step 2 — Carbonation button
Place your hand under the carbonation button and gently pull up and away from you, towards the back of the machine.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 4
SodaStream Fountain Jet A200 Spring Replacement
Step 3 — spring removal
Remove the spring located under the carbonation button.
Replace with the new spring, by lining it up and pushing it down.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-03 12:57:19 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 4
