TECH TIPS
TECH TIPS Lunch Bag with Shoulder Strap Part # SB350
Sublimation Instructions
PREHEAT your press to 390˚ F PRINT THE TRANSFER – A template is available on our website. ATTACH THE TRANSFER - Heat tape is recommended for this item. LAY ONLY THE WHITE FLAP ON THE PRESS - The rest of the bag should be draped off the edge of the press, including the zippers. PRESSURE – Use a setting of 6-8 if your press has been calibrated, or medium heavy pressure TEMPERATURE – 390˚ F TIME – 50-60 seconds FOR BEST RESULTS: Be sure the entire white front panel is on the press when sublimating
Your Premier Distributor of Laser and Rotary Engraving Products and Sublimation Supplies P: 800-869-7800 // F: 800-869-7853 // E: [email protected] // W: www.johnsonplastics.com
Sublimation Instructions
PREHEAT your press to 390˚ F PRINT THE TRANSFER – A template is available on our website. ATTACH THE TRANSFER - Heat tape is recommended for this item. LAY ONLY THE WHITE FLAP ON THE PRESS - The rest of the bag should be draped off the edge of the press, including the zippers. PRESSURE – Use a setting of 6-8 if your press has been calibrated, or medium heavy pressure TEMPERATURE – 390˚ F TIME – 50-60 seconds FOR BEST RESULTS: Be sure the entire white front panel is on the press when sublimating
Your Premier Distributor of Laser and Rotary Engraving Products and Sublimation Supplies P: 800-869-7800 // F: 800-869-7853 // E: [email protected] // W: www.johnsonplastics.com
