TECH TIPS
TECH TIPS ChromaLuxe Natural Wood Panels Part # UN4528-34
Sublimation Instructions
When sublimating Natural Wood Prints it is important to keep the bleed on your transfer to a minimum in order to reduce the appearance of dyes on the sides. Suggested bleed is 0.1” on all four sides with transfer taped to the back of the panel. Temperature - 400º Time - 1:30 to 2:30 depending on size NOTE: - Make sure your product is face up on the heat press. - Do not apply the heat tape to the edge of the wood panel as it will leave a mark.
ChromaLuxe Natural Wood Prints provide a vibrancy and durability that make it the best photo on wood in the market. These are made with a maple veneer with a low gloss ChromaLuxe coating and have pre-drilled keyholes on the back that make them ready to hang out of the box.
Your Premier Distributor of Laser and Rotary Engraving Products and Sublimation Supplies P: 800-869-7800 // F: 800-869-7853 // E: [email protected] // W: www.johnsonplastics.com
Sublimation Instructions
When sublimating Natural Wood Prints it is important to keep the bleed on your transfer to a minimum in order to reduce the appearance of dyes on the sides. Suggested bleed is 0.1” on all four sides with transfer taped to the back of the panel. Temperature - 400º Time - 1:30 to 2:30 depending on size NOTE: - Make sure your product is face up on the heat press. - Do not apply the heat tape to the edge of the wood panel as it will leave a mark.
ChromaLuxe Natural Wood Prints provide a vibrancy and durability that make it the best photo on wood in the market. These are made with a maple veneer with a low gloss ChromaLuxe coating and have pre-drilled keyholes on the back that make them ready to hang out of the box.
Your Premier Distributor of Laser and Rotary Engraving Products and Sublimation Supplies P: 800-869-7800 // F: 800-869-7853 // E: [email protected] // W: www.johnsonplastics.com
