Turtle Beach Ear Force Stealth 500P Battery
Turtle Beach Ear Force Stealth 500P Battery Replacement
Turtle Beach Ear Force Stealth 500P Battery Replacement A guide for the repair of a loose connection on the Turtle Beach Ear Force Stealth 500P battery.
作成者: Noah Franklin
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠1ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
はじめに Use this guide to replace the battery in your Turtle Beach Ear Force Stealth 500P headphones.
ツール: wire cap (2) Small
Phillips #1 Screwdriver (1) Metal Spudger (1) Wire stripper/crimping tool (1) JIS #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠2ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 1 — Earpad Assembly
Remove the ear pad from the earphone by gently pulling the cloth pad outwards from the slot holding the cloth.
Work circularly until removed.
手順 2
Using a Phillips #1 screwdriver, remove the four fastening screws that hold the blue plastic speaker mount in place.
Gently pull blue plastic from black housing by hand until separated.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠3ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 3 — Battery
Use screwdriver tip J00 to remove three screws fastening circuit board to casing.
手順 4
Use bent tweezers to remove two wire connector plugs from circuit board.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠4ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 5
Circuit board will be free to be removed by hand. Use plastic pry tool to slide between casing and circuit board if needed.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠5ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 6
Gently removed and flip over circuit board to reveal battery pack attached to the underside. Careful not to pull out wires running through headband.
Use metal pry tool to slide between battery and circuit board to break up adhesive. Ensure the battery wire connector plug has been removed on front side.
手順 7
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠6ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 8
Battery will be free to be removed and replaced.
To reassemble your device, follow these instructions in reverse order. この文書の最終更新日は 2017-09-26 07:29:41 AMです。
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠7ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement A guide for the repair of a loose connection on the Turtle Beach Ear Force Stealth 500P battery.
作成者: Noah Franklin
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠1ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
はじめに Use this guide to replace the battery in your Turtle Beach Ear Force Stealth 500P headphones.
ツール: wire cap (2) Small
Phillips #1 Screwdriver (1) Metal Spudger (1) Wire stripper/crimping tool (1) JIS #00 Screwdriver (1)
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠2ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 1 — Earpad Assembly
Remove the ear pad from the earphone by gently pulling the cloth pad outwards from the slot holding the cloth.
Work circularly until removed.
手順 2
Using a Phillips #1 screwdriver, remove the four fastening screws that hold the blue plastic speaker mount in place.
Gently pull blue plastic from black housing by hand until separated.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠3ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 3 — Battery
Use screwdriver tip J00 to remove three screws fastening circuit board to casing.
手順 4
Use bent tweezers to remove two wire connector plugs from circuit board.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠4ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 5
Circuit board will be free to be removed by hand. Use plastic pry tool to slide between casing and circuit board if needed.
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠5ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 6
Gently removed and flip over circuit board to reveal battery pack attached to the underside. Careful not to pull out wires running through headband.
Use metal pry tool to slide between battery and circuit board to break up adhesive. Ensure the battery wire connector plug has been removed on front side.
手順 7
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠6ページ目
Turtle Beach Ear Force Stealth 500P Battery Replacement
手順 8
Battery will be free to be removed and replaced.
To reassemble your device, follow these instructions in reverse order. この文書の最終更新日は 2017-09-26 07:29:41 AMです。
© iFixit — CC BY-NC-SA
jp.iFixit.com
全7 ページ分㮠7ページ目
