Bearing Inspection Report

Bearing Inspection Report

International Paper Valliant, OK #3 PM

Reel Spool

Friday - June 17, 2016

ROLL #39404

Bearing Inspection Report

End User International Paper

Contact Ross Finley

Address 890 IP Lane

City, State, Zip Valliant, OK, 74764

Phone 580-933-1534

E-mail [email protected], josh.…

Distributor Motion Industries

Inspection Date: 2016-06-15

Contact

Brenda Mckee

Billy O'Mary

Address

Address

100 West Maple

617 Yorkville Park Square

City, State, Zip

City, State, Zip

Millerton, OK, 74750

Columbus, MS, 39702

Phone

Phone

580-746-2227

662-328-3841

E-mail

E-mail

[email protected]…

[email protected]

Vendor Job #

Dennis H Dixon / Keith Hunt

#3 PM

Valmet

Contact

SKF TM/ IS

Equipment

Vendor

SO #311000

Application Reel Spool

Travel Time: 8 hours

Serial# ROLL #39404

Inspection Time: 1 hours

As always, we appreciate the opportunity to be of service. Please contact me if you have any questions and/or/comments. Kind Regards, Keith Hunt - SKF Industry Specialist Pulp & Paper

http://www.SKF.com

Delhi, LA 71232 /

[email protected] Inspected by Bryan Lamb

This report is confidential and proprietary to SKF and may not be disclosed to any third party without the express written consent of SKF. Use of this report is limited to the sole purpose for which it was provided.

Outboard Tending Bearing Inspection International Paper

#3 PM

ROLL #39404

Recommendations:

Reuse Bearing

Reel Spool

Remanufacture Bearing

Replace Bearing

Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material, and protected during storage prior to re-installation on journal bearing seat, per SKF. Bearing Nomenclature:

Inner Race Rotation

Outer Race Rotation

SKF 24040 CCK30/W33 W41LWR (2014)

Comments:

Inspection Findings: Outer Ring Outside Diameter (OD)

Inner Ring Bore

Normal

Normal

Outer Ring Raceway (ORR)

Rolling Elements

5.2.2 - Abrasive wear - Minor

5.5.3 - Indentation from debris - Minor

5.3.3.3 - False brinelling - Minor

5.3.2 - Moisture corrosion - Minor

Inner Ring Raceway (IRR)

Cage

Lubrication: grease

Outboard Tending Bearing Images Outer Ring Outside Diameter Photo 1 Normal -

Outer Ring Outside Diameter Photo 2 Normal -

Outboard Tending Bearing Images Outer Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor

Outer Ring Raceway Photo 2 5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor

Outboard Tending Bearing Images Inner Ring Bore Photo 1 Normal -

Outboard Tending Bearing Images Rolling Elements Photo 1

Rolling Elements Photo 2 5.5.3 - Indentation from debris - Minor 5.3.2 - Moisture corrosion - Minor

Inboard Tending Bearing Inspection International Paper

#3 PM

ROLL #39404

Recommendations:

Reuse Bearing

Reel Spool

Remanufacture Bearing

Replace Bearing

Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material, and protected during storage prior to re-installation on journal bearing seat, per SKF. Bearing Nomenclature:

Inner Race Rotation

Outer Race Rotation

SKF 24044 CCK30/W33 SWEDEN, W10LWR (2014)

Comments:

Inspection Findings: Outer Ring Outside Diameter (OD)

Inner Ring Bore

Normal

Normal

Outer Ring Raceway (ORR)

Rolling Elements

5.3.2 - Moisture corrosion - Minor

Normal

Inner Ring Raceway (IRR)

Cage

Lubrication: grease

Inboard Tending Bearing Images Outer Ring Outside Diameter Photo 1 Normal -

Outer Ring Outside Diameter Photo 2 Normal -

Inboard Tending Bearing Images Outer Ring Raceway Photo 1 5.3.2 - Moisture corrosion - Minor

Outer Ring Raceway Photo 2

Inboard Tending Bearing Images Inner Ring Bore Photo 1 Normal -

Inboard Tending Bearing Images Rolling Elements Photo 1 Normal -

Rolling Elements Photo 2 Normal -

Inboard Drive Bearing Inspection International Paper

#3 PM

ROLL #39404

Recommendations:

Reuse Bearing

Reel Spool

Remanufacture Bearing

Replace Bearing

Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material, and protected during storage prior to re-installation on journal bearing seat, per SKF. Bearing Nomenclature:

Inner Race Rotation

Outer Race Rotation

SKF 24044 CCK30/W33 SWEDEN, W10LWR (2014)

Comments:

Inspection Findings: Outer Ring Outside Diameter (OD)

Inner Ring Bore

Normal

5.3.3.2 - Fretting corrosion - Minor

Outer Ring Raceway (ORR)

Rolling Elements

5.5.3 - Indentation from debris - Minor

Normal

Inner Ring Raceway (IRR)

Cage

Lubrication: grease

Inboard Drive Bearing Images Outer Ring Outside Diameter Photo 1 Normal -

Outer Ring Outside Diameter Photo 2 Normal -

Inboard Drive Bearing Images Outer Ring Raceway Photo 1

Outer Ring Raceway Photo 2 5.5.3 - Indentation from debris - Minor

Inboard Drive Bearing Images Inner Ring Bore Photo 1 5.3.3.2 - Fretting corrosion - Minor

Inboard Drive Bearing Images Rolling Elements Photo 1 Normal -

Rolling Elements Photo 2 Normal -

Outboard Drive Bearing Inspection International Paper

#3 PM

ROLL #39404

Recommendations:

Reuse Bearing

Reel Spool

Remanufacture Bearing

Replace Bearing

Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material, and protected during storage prior to re-installation on journal bearing seat, per SKF. Bearing Nomenclature:

Inner Race Rotation

Outer Race Rotation

SKF 24040 CCK30/W33 W41LWR (2014)

Comments:

Inspection Findings: Outer Ring Outside Diameter (OD)

Inner Ring Bore

Normal

Normal

Outer Ring Raceway (ORR)

Rolling Elements

5.3.2 - Moisture corrosion - Minor

5.3.2 - Moisture corrosion - Minor

5.5.3 - Indentation from debris - Minor

Inner Ring Raceway (IRR)

Lubrication: grease

Cage

Outboard Drive Bearing Images Outer Ring Outside Diameter Photo 1 Normal -

Outer Ring Outside Diameter Photo 2 Normal -

Outboard Drive Bearing Images Outer Ring Raceway Photo 1

Outer Ring Raceway Photo 2 5.3.2 - Moisture corrosion - Minor 5.5.3 - Indentation from debris - Minor

Outboard Drive Bearing Images Inner Ring Bore Photo 1 Normal -

Outboard Drive Bearing Images Rolling Elements Photo 1

Rolling Elements Photo 2 5.3.2 - Moisture corrosion - Minor