Configuring eduroam on Android 2.3+ - SLIDEBLAST.COM
Configuring eduroam on Android 2.3+
Wilfrid Laurier University
Configuring eduroam on Android 2.3+ This will explain how to configure eduroam on an Android device with version 2.3 and above. 1. Tap on "Settings" on your Home screen. 2. Tap on “Wireless and Network”
3. Make sure “Flight mode” is not enabled, then tab on “Wi-Fi settings”.
4. Make sure Wi-Fi is turned on, then select "eduroam" by tapping on it.
ITS 2014
Page 1
Configuring eduroam on Android 2.3+
Wilfrid Laurier University
5. Configure the connection as below.
a. b. c. d.
Take the default setting “PEAP” for EAP method Select “MSCHAPV2” for Phase 2 authentication Leave CA and User certificate(s) unspecified. Enter your Network account username with suffix “@wlu.ca” and password. With the “@wlu.ca” suffix, you can use your Laurier credentials to connect to the wireless network at other institutions who are the members of eduroam, eg: University of Waterloo.
6. Click Connect 7. You should now be connected to eduroam.
ITS 2014
Page 2
Wilfrid Laurier University
Configuring eduroam on Android 2.3+ This will explain how to configure eduroam on an Android device with version 2.3 and above. 1. Tap on "Settings" on your Home screen. 2. Tap on “Wireless and Network”
3. Make sure “Flight mode” is not enabled, then tab on “Wi-Fi settings”.
4. Make sure Wi-Fi is turned on, then select "eduroam" by tapping on it.
ITS 2014
Page 1
Configuring eduroam on Android 2.3+
Wilfrid Laurier University
5. Configure the connection as below.
a. b. c. d.
Take the default setting “PEAP” for EAP method Select “MSCHAPV2” for Phase 2 authentication Leave CA and User certificate(s) unspecified. Enter your Network account username with suffix “@wlu.ca” and password. With the “@wlu.ca” suffix, you can use your Laurier credentials to connect to the wireless network at other institutions who are the members of eduroam, eg: University of Waterloo.
6. Click Connect 7. You should now be connected to eduroam.
ITS 2014
Page 2
