13 11 26 POISONS INFORMATION CENTRE
AUTHORIZED AUSTRALIAN DISTRIBUTORS
CAMPBELLS WHOLESALE PTY LTD 21 BALLANTYNE RD KEWDALE WA 6105 Tel.: (08) 9353 3354 Fax: (08) 9353 6994 www.campbellswholesale.com.au
EMERGENCY PHONE NO. (24 HOURS AUSTRALIA)
13 11 26 POISONS INFORMATION CENTRE Campbells Wholesale Pty Ltd makes no representation as to the completeness and accuracy of the data contained in this data sheet. It is the user’s obligation to evaluate and use this product safely and to comply with all the Local, State and Federal regulations and laws. Campbells Wholesale shall not be responsible for loss, damage or injury resulting from reliance upon or failure to adhere to any recommendations or information contained herein, from abnormal use of the material or from any hazard inherent in the nature of the material.
Issued Date:
VITAL TECHNICAL SDN. BHD. Technical Data Sheet
VT-621
31/03/08
Revision No.:
7
Revised Date:
16/02/12
Page:
1 Of 2
All Purpose MS Sealant
Product Specification: Curing System Appearance Skin Over Time Tensile Strength (ASTM D412) Elongation (ASTM D412) Shore A Hardness (ASTM C661) Density Application Temperature Service Temperature Max. joint width Full Cure Content Features
Shelf Life
Moisture Curing Non-Sagging Paste 10 minutes 2.00 N/mm² 600% 30 - 40 (Approx.) 1.44 – 1.46 g/L 5°C to 40°C -30°C to 100°C 25 mm 7 days on porous substances 290ml High Strength & Elastic Good UV Resistant Primerless Bonding to Most Substrates Paintable & Environmental Friendly Anti Fungus / Mildew Resistance 9 months
Product Description: A one component, high performance sealant based on advance MS Polymer Technology. It is solvent, silicone and isocyanate-free. It had an excellent UV, weather and temperature resistance. It had excellent adhesion over a wide variety of substrates and is paintable with most common industrial paints.
Applications: Ideal for making permanent elastic seals of high bonding strength. It is specially formulated for elastic construction in marine, automotive and industrial applications requiring a high strength performance. Ideal for bonding of plastics (Nylon, PVC, ABS, Polycarbonate etc.), metal (Stainless Steel, Aluminum, Steel, Copper etc.), rubber (Natural Rubber, Synthetic Rubber, Silicone Rubber, EPDM etc.), natural materials (Wood, Plywood, Leather, Cloths, Paperboard etc.) & inorganic (Concrete, Mortar, Natural Stone, Tile, Glass, porcelain etc.)
Coverage: The coverage below is the approximate linear meter coverage per pack size (600ml): Joint Size Estimated Length Formula:
6 mm x 6 mm 16.7 m
10 mm x 10 mm 6m
(W x D x L) ÷ 1000 = litre
W = Width (mm)
D = Depth (mm) L = Length (meter)
20mm x 10 mm 3m
VITAL TECHNICAL SDN. BHD. Technical Data Sheet
VT-621
Issued Date:
31/03/08
Revision No.:
7
Revised Date:
16/02/12
Page:
2 Of 2
All Purpose MS Sealant
Direction: • • • • • •
Surfaces must be clean, dry and free of dirt, grease, oil or water. For a neat finish, apply masking tape and remove it before sealant has skinned over. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun. Tooling time is 5 minutes, tack free time is 10 minutes. Uncured sealant can be cleaned up with mineral spirits. Use approved backing material for joints over 10mm deep.
Caution: • • • •
Uncured adhesive / sealant causes skin and eye irritation upon contact. Avoid contact with eyes, skin and mouth. Use in well ventilated area. In case of contact with eyes, flush with water immediately for 15 minutes. If irritation persists, seek medical attention. Keep out of reach of children.
Storage: • •
Store in a dry and cool place with temperature below +25°C. Use within 9 months from date of production.
Every endeavour has been made to ensure that the information given herein is true and reliable but it is given only for the guidance of our customers. The company cannot accept any responsibility for the loss or damage that may result from the use of the information, due to the possibility of various of processing or working conditions and of workmanship outside our control. Users are advised to confirm suitability of this product by their own tests.
CAMPBELLS WHOLESALE PTY LTD 21 BALLANTYNE RD KEWDALE WA 6105 Tel.: (08) 9353 3354 Fax: (08) 9353 6994 www.campbellswholesale.com.au
EMERGENCY PHONE NO. (24 HOURS AUSTRALIA)
13 11 26 POISONS INFORMATION CENTRE Campbells Wholesale Pty Ltd makes no representation as to the completeness and accuracy of the data contained in this data sheet. It is the user’s obligation to evaluate and use this product safely and to comply with all the Local, State and Federal regulations and laws. Campbells Wholesale shall not be responsible for loss, damage or injury resulting from reliance upon or failure to adhere to any recommendations or information contained herein, from abnormal use of the material or from any hazard inherent in the nature of the material.
Issued Date:
VITAL TECHNICAL SDN. BHD. Technical Data Sheet
VT-621
31/03/08
Revision No.:
7
Revised Date:
16/02/12
Page:
1 Of 2
All Purpose MS Sealant
Product Specification: Curing System Appearance Skin Over Time Tensile Strength (ASTM D412) Elongation (ASTM D412) Shore A Hardness (ASTM C661) Density Application Temperature Service Temperature Max. joint width Full Cure Content Features
Shelf Life
Moisture Curing Non-Sagging Paste 10 minutes 2.00 N/mm² 600% 30 - 40 (Approx.) 1.44 – 1.46 g/L 5°C to 40°C -30°C to 100°C 25 mm 7 days on porous substances 290ml High Strength & Elastic Good UV Resistant Primerless Bonding to Most Substrates Paintable & Environmental Friendly Anti Fungus / Mildew Resistance 9 months
Product Description: A one component, high performance sealant based on advance MS Polymer Technology. It is solvent, silicone and isocyanate-free. It had an excellent UV, weather and temperature resistance. It had excellent adhesion over a wide variety of substrates and is paintable with most common industrial paints.
Applications: Ideal for making permanent elastic seals of high bonding strength. It is specially formulated for elastic construction in marine, automotive and industrial applications requiring a high strength performance. Ideal for bonding of plastics (Nylon, PVC, ABS, Polycarbonate etc.), metal (Stainless Steel, Aluminum, Steel, Copper etc.), rubber (Natural Rubber, Synthetic Rubber, Silicone Rubber, EPDM etc.), natural materials (Wood, Plywood, Leather, Cloths, Paperboard etc.) & inorganic (Concrete, Mortar, Natural Stone, Tile, Glass, porcelain etc.)
Coverage: The coverage below is the approximate linear meter coverage per pack size (600ml): Joint Size Estimated Length Formula:
6 mm x 6 mm 16.7 m
10 mm x 10 mm 6m
(W x D x L) ÷ 1000 = litre
W = Width (mm)
D = Depth (mm) L = Length (meter)
20mm x 10 mm 3m
VITAL TECHNICAL SDN. BHD. Technical Data Sheet
VT-621
Issued Date:
31/03/08
Revision No.:
7
Revised Date:
16/02/12
Page:
2 Of 2
All Purpose MS Sealant
Direction: • • • • • •
Surfaces must be clean, dry and free of dirt, grease, oil or water. For a neat finish, apply masking tape and remove it before sealant has skinned over. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun. Tooling time is 5 minutes, tack free time is 10 minutes. Uncured sealant can be cleaned up with mineral spirits. Use approved backing material for joints over 10mm deep.
Caution: • • • •
Uncured adhesive / sealant causes skin and eye irritation upon contact. Avoid contact with eyes, skin and mouth. Use in well ventilated area. In case of contact with eyes, flush with water immediately for 15 minutes. If irritation persists, seek medical attention. Keep out of reach of children.
Storage: • •
Store in a dry and cool place with temperature below +25°C. Use within 9 months from date of production.
Every endeavour has been made to ensure that the information given herein is true and reliable but it is given only for the guidance of our customers. The company cannot accept any responsibility for the loss or damage that may result from the use of the information, due to the possibility of various of processing or working conditions and of workmanship outside our control. Users are advised to confirm suitability of this product by their own tests.
