13 11 26
AUTHORIZED AUSTRALIAN DISTRIBUTORS
CAMPBELLS WHOLESALE PTY LTD 21 BALLANTYNE RD KEWDALE WA 6105 Tel.: (08) 9353 3354 Fax: (08) 9353 6994 www.campbellswholesale.com.au
EMERGENCY PHONE NO. (24 HOURS AUSTRALIA)
13 11 26 POISONS INFORMATION CENTRE Campbells Wholesale Pty Ltd makes no representation as to the completeness and accuracy of the data contained in this data sheet. It is the user’s obligation to evaluate and use this product safely and to comply with all the Local, State and Federal regulations and laws. Campbells Wholesale shall not be responsible for loss, damage or injury resulting from reliance upon or failure to adhere to any recommendations or information contained herein, from abnormal use of the material or from any hazard inherent in the nature of the material.
VITAL TECHNICAL SDN. BHD.
Issued Date: Revision No.:
15/02/11 4
Tecnical Data Sheet
Revised Date:
14/03/13
Page:
1 Of 2
VT-622 All-Stik MS Clear Sealant
Product Specification: Appearance Density Paint ability Skin over time Joint movement capability Shore A hardness (3 s) 100% modulus Tensile strength Features
Shelf Life Packaging
Translucent Paste 1.06 g/mL Paintable 10 minutes ±25 % 38 1.0 N/mm² 2.2 N/mm² Excellent bonding strength (Shoe) Indoor & Outdoor (Number plate) Excellent heat & water resistant (Cattle) Bonds various materials (Plastic/PVC) 9 months 290ml
Product Description: A one component, clear color, new generation MS-Polymer Adhesive / Sealant formulated for all bonding and sealing applications where long term reliability is required. It offers excellent bonding strength on various materials. It will bond to form a durable, flexible, waterproof seal. It can withstand wide ranging temperature between -60°C to 120°C. It is suitable for both indoor and outdoor applications.
Applications: Ideal for bonding of plastics (Nylon, PVC, ABS, Polycarbonate, etc.), Metal (Stainless Steel, Aluminum, Steel, Copper, etc.), Rubber (Natural Rubber, Synthetic Rubber, Silicone Rubber, EPDM, etc.), Natural Materials (Wood, Polywood, Leather, Cloths, Paperboard, etc.) & Inorganics (Concrete, Mortar, Natural Stone, Tile, Glass, porcelain, etc.)
Directions:
Surfaces must be clean, dry and free of dirt, grease, oil or water. For a neat finish, apply masking tape and remove it before sealant has skinned over. Cut tip off and puncture the internal foil seal with nozzle. Cut nozzle at 45° angle to desire bead-width and apply to substrate with cartridge gun. Tooling time is 15 minutes, tack free time is 20 minutes. Uncured sealant can be cleaned up with mineral spirits. Use approved backing material for joints over 10mm deep.
VITAL TECHNICAL SDN. BHD.
Issued Date: Revision No.:
15/02/11 4
Tecnical Data Sheet
Revised Date:
14/03/13
Page:
2 Of 2
VT-622 All-Stik MS Clear Sealant
Limitation: This MS Sealant should not be: Use in chlorinated water such as swimming pools, spas etc. Constant immersed in salt water. Used for glazing applications.
Caution:
Avoid contact with eyes, skin and mouth. In case of contact with eyes, flush with water immediately for 15 minutes. If irritation persists, seek medical attention. Keep out of reach of children. Use in well ventilated areas.
Storage:
Store in a dry and cool place with temperature below +25°C. Use within 9 months from date of production.
Every endeavour has been made to ensure that the information given herein is true and reliable but it is given only for the guidance of our customers. The company cannot accept any responsibility for the loss or damage that may result from the use of the information, due to the possibility of various of processing or working conditions and of workmanship outside our control. Users are advised to confirm suitability of this product by their own tests.
CAMPBELLS WHOLESALE PTY LTD 21 BALLANTYNE RD KEWDALE WA 6105 Tel.: (08) 9353 3354 Fax: (08) 9353 6994 www.campbellswholesale.com.au
EMERGENCY PHONE NO. (24 HOURS AUSTRALIA)
13 11 26 POISONS INFORMATION CENTRE Campbells Wholesale Pty Ltd makes no representation as to the completeness and accuracy of the data contained in this data sheet. It is the user’s obligation to evaluate and use this product safely and to comply with all the Local, State and Federal regulations and laws. Campbells Wholesale shall not be responsible for loss, damage or injury resulting from reliance upon or failure to adhere to any recommendations or information contained herein, from abnormal use of the material or from any hazard inherent in the nature of the material.
VITAL TECHNICAL SDN. BHD.
Issued Date: Revision No.:
15/02/11 4
Tecnical Data Sheet
Revised Date:
14/03/13
Page:
1 Of 2
VT-622 All-Stik MS Clear Sealant
Product Specification: Appearance Density Paint ability Skin over time Joint movement capability Shore A hardness (3 s) 100% modulus Tensile strength Features
Shelf Life Packaging
Translucent Paste 1.06 g/mL Paintable 10 minutes ±25 % 38 1.0 N/mm² 2.2 N/mm² Excellent bonding strength (Shoe) Indoor & Outdoor (Number plate) Excellent heat & water resistant (Cattle) Bonds various materials (Plastic/PVC) 9 months 290ml
Product Description: A one component, clear color, new generation MS-Polymer Adhesive / Sealant formulated for all bonding and sealing applications where long term reliability is required. It offers excellent bonding strength on various materials. It will bond to form a durable, flexible, waterproof seal. It can withstand wide ranging temperature between -60°C to 120°C. It is suitable for both indoor and outdoor applications.
Applications: Ideal for bonding of plastics (Nylon, PVC, ABS, Polycarbonate, etc.), Metal (Stainless Steel, Aluminum, Steel, Copper, etc.), Rubber (Natural Rubber, Synthetic Rubber, Silicone Rubber, EPDM, etc.), Natural Materials (Wood, Polywood, Leather, Cloths, Paperboard, etc.) & Inorganics (Concrete, Mortar, Natural Stone, Tile, Glass, porcelain, etc.)
Directions:
Surfaces must be clean, dry and free of dirt, grease, oil or water. For a neat finish, apply masking tape and remove it before sealant has skinned over. Cut tip off and puncture the internal foil seal with nozzle. Cut nozzle at 45° angle to desire bead-width and apply to substrate with cartridge gun. Tooling time is 15 minutes, tack free time is 20 minutes. Uncured sealant can be cleaned up with mineral spirits. Use approved backing material for joints over 10mm deep.
VITAL TECHNICAL SDN. BHD.
Issued Date: Revision No.:
15/02/11 4
Tecnical Data Sheet
Revised Date:
14/03/13
Page:
2 Of 2
VT-622 All-Stik MS Clear Sealant
Limitation: This MS Sealant should not be: Use in chlorinated water such as swimming pools, spas etc. Constant immersed in salt water. Used for glazing applications.
Caution:
Avoid contact with eyes, skin and mouth. In case of contact with eyes, flush with water immediately for 15 minutes. If irritation persists, seek medical attention. Keep out of reach of children. Use in well ventilated areas.
Storage:
Store in a dry and cool place with temperature below +25°C. Use within 9 months from date of production.
Every endeavour has been made to ensure that the information given herein is true and reliable but it is given only for the guidance of our customers. The company cannot accept any responsibility for the loss or damage that may result from the use of the information, due to the possibility of various of processing or working conditions and of workmanship outside our control. Users are advised to confirm suitability of this product by their own tests.
