Basic Finishing Instructions
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Basic Finishing Instructions 1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design.
3
3. Fold border to the back of your project.
Basic Finishing Instructions
4
4. Whip stitch border into place.
1 of 1
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Making a Pillow Instructions For best results use pillow form (sold separately).
1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design. 3. Cut a piece of fabric for the back of the pillow 1” [2.5 cm] larger than your design. 4. With the right sides of your design and your fabric together, sew along 3 sides. 5. Turn right side out and insert pillow form. 6. Whip stitch remaining side closed.
4
Making a Pillow Instructions
6
1 of 1
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Making a Rug 1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design.
3
3. Fold border to the back of your project.
Making a Rug Instructions
1 of 2
Making a Rug cont. 4. Place binding over folded edge and sew in place (see A). Miter binding at corners so rug will lay flat (see B,C,D)
A
B
C
D
Making a Rug Instructions
2 of 2
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Making a Wall Hanging For best results use rug binding
1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design. 3. Cut a length of rug binding the same length as the top of your design to create a pocket for the dowel or rod. 4. Stitch the rug binding in place, leaving both ends open so dowel or rod can be inserted.
3
Making a Wall Hanging Instructions
4
1 of 1
Basic Finishing Instructions 1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design.
3
3. Fold border to the back of your project.
Basic Finishing Instructions
4
4. Whip stitch border into place.
1 of 1
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Making a Pillow Instructions For best results use pillow form (sold separately).
1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design. 3. Cut a piece of fabric for the back of the pillow 1” [2.5 cm] larger than your design. 4. With the right sides of your design and your fabric together, sew along 3 sides. 5. Turn right side out and insert pillow form. 6. Whip stitch remaining side closed.
4
Making a Pillow Instructions
6
1 of 1
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Making a Rug 1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design.
3
3. Fold border to the back of your project.
Making a Rug Instructions
1 of 2
Making a Rug cont. 4. Place binding over folded edge and sew in place (see A). Miter binding at corners so rug will lay flat (see B,C,D)
A
B
C
D
Making a Rug Instructions
2 of 2
LATCH HOOK FINISHING INSTRUCTIONS **ADULT SUPERVISION RECOMMENDED**
Making a Wall Hanging For best results use rug binding
1. Carefully trim any uneven yarns with a pair of scissors.
2
2. Trim your canvas, leaving a 1” [2.5 cm] border around your design. 3. Cut a length of rug binding the same length as the top of your design to create a pocket for the dowel or rod. 4. Stitch the rug binding in place, leaving both ends open so dowel or rod can be inserted.
3
Making a Wall Hanging Instructions
4
1 of 1
