Batik Belt

Batik Belt Supplies:

. Fabric-4 inches wide by -60 inches long . Craft Fuse -3 inches wide by-60 inches ling o l set !%inch D-rings . iron o sewing machine o thread Directions:

L. Measure waist

and add 12"

.

pants you plan to wear with the

lf you plan to wear the belt lower, put on the

belt.

Feed a tape measure through the belt loops

to measure and add 12".

2.

Cut fabric to the desired length based on your measurement.

3.

Cut the Craft Fuse 1 inch shorter than the desired length.

4.

Center the Craft-Fuse on the wrong side of the fabric. (You should have %inch

all around.) Press the craft-Fuse to the fabric.

5.

the long sides and one short end to the inside, over the Craft-Fuse. Do not fold the other short end. Press

5. Fold the fused fabric in half lengthwise, wrong sides together, and press. 7. Starting at the unfolded end of one long side, top stitch one long side, the folded short end and the second long side. This leaves the unfolded short end unstitched. 8. The last step is to attach the D-rings to the unstitched end of the belt. Loop the

belt through the 2 D-rings. Fold the raw edge under approximately % inch and then fold the belt over again with the flat side of the rings in the fold. Stitch

through all the thicknesses close to the rings.