Confined Space Entry Refresher - Workplace Training Centre
Confined Space Entry Refresher Course Overview This course covers the requirements for those who are required to be reassessed for work in confined spaces in accordance with Australian Standard 2865.2009. Successfully completing this course will allow you to refresh your knowledge and skill whilst also being updated in current industry practices. This course is only suited to those who have completed confined space entry training within three (3) years. If training was completed more than three years ago, you will be required to complete the full confined space entry course. Prerequisites Completed any combination of the following confined space entry training units within the last three (3) years: RIIOHS202A – Enter and Work in a Confined Space RIIWHS202D – Enter and Work in a Confined Space MSMPER205 – Enter and Work in a Confined Space RIIRIS201B – Conduct Local Risk Control RIIRIS201D – Conduct Local Risk Control MSAPMPER205C – Enter Confined Spaces MSAPMPER200C – Work in accordance with an Issued Permit MSMPER200 – Work in accordance with an Issued Permit MSAPMOHS216A – Operate Breathing Apparatus MSMWHS216 – Operate Breathing Apparatus MSAPMOHS217A – Gas Test Atmospheres MSMWHS217 – Gas Test Atmospheres Evidence of completion must be provided prior to course commencement. Workplace Training Centre’s conditions for assessment: Speak and understand English at a level to be able to participate in the training and assessment. Note: Oral assessments can be arranged for applicants with writing and reading difficulties.
Able to produce sufficient identification with name and photo (ie drivers licence, passport etc). Learning outcome On completion of the course, participants will have refreshed the following skills and knowledge to: Legislative Requirements: WHS, Australian Standards and Codes of Practice Identify confined spaces Planning to work: Hazard management, exposure standards and consultation Following Procedures: Equipment inspections, atmospheric testing, entry permits and reporting Confined Space Entry: Access, egress, height safety, rescue Equipment use: PPE, breathing apparatus, atmospheric monitors, communications Conclude Work: Clean up, inspection, storage and reporting Duration Total duration is 1 day. Training and reassessment is conducted on the same day. Course Outline Presentation, discussion and confined space entry and breathing apparatus activities.
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.1
[email protected] ABN: 24127418106
Practical entry exercises, knowledge and practical assessments
Outcome Upon successful completion of the course, a certificate of completion will be awarded with the units refresher and reassessment was conducted and a convenient wallet sized card is issued by Workplace Training Centre. Location Training can be conducted at Workplace Training Centre’s facilities located in Arndell Park NSW or if required, can also be conducted on your site providing the following requirements are met: Training room with tables, chairs and screen (or blank wall for a projector) Suitable confined space or simulated confined space for practical training Appropriate PPE and equipment for the practical scenarios
Course Sizes Maximum 8 participants Minimum 4 participants for onsite training
Fees and Charges The course fee is $260.00 + GST per person. This fee includes all course materials. Travel and parking costs may apply to onsite training. Please contact us for group training rates. Where Workplace Training Centre receives sufficient notice of cancellation (at least 48 hours), a refund of fees may be available. Cancellations within 48 hours may incur a 20% cancellation fee. No refund is given for non-attendance or cancellation on day of training. More information can be found on our website or a hard copy can be obtained from the office. A re-issue of certificates will incur a fee of $30.
For any further information contact Workplace Training Centre. The student information pack can be found on our website or by calling the office and will provide additional information about the course, responsibilities and a copy of the unit of competence.
To enrol or for more information contact us on: Phone: 1300 668 141 Email: [email protected] Web: www.workplacetrainingcentre.edu.au
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.1
[email protected] ABN: 24127418106
Able to produce sufficient identification with name and photo (ie drivers licence, passport etc). Learning outcome On completion of the course, participants will have refreshed the following skills and knowledge to: Legislative Requirements: WHS, Australian Standards and Codes of Practice Identify confined spaces Planning to work: Hazard management, exposure standards and consultation Following Procedures: Equipment inspections, atmospheric testing, entry permits and reporting Confined Space Entry: Access, egress, height safety, rescue Equipment use: PPE, breathing apparatus, atmospheric monitors, communications Conclude Work: Clean up, inspection, storage and reporting Duration Total duration is 1 day. Training and reassessment is conducted on the same day. Course Outline Presentation, discussion and confined space entry and breathing apparatus activities.
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.1
[email protected] ABN: 24127418106
Practical entry exercises, knowledge and practical assessments
Outcome Upon successful completion of the course, a certificate of completion will be awarded with the units refresher and reassessment was conducted and a convenient wallet sized card is issued by Workplace Training Centre. Location Training can be conducted at Workplace Training Centre’s facilities located in Arndell Park NSW or if required, can also be conducted on your site providing the following requirements are met: Training room with tables, chairs and screen (or blank wall for a projector) Suitable confined space or simulated confined space for practical training Appropriate PPE and equipment for the practical scenarios
Course Sizes Maximum 8 participants Minimum 4 participants for onsite training
Fees and Charges The course fee is $260.00 + GST per person. This fee includes all course materials. Travel and parking costs may apply to onsite training. Please contact us for group training rates. Where Workplace Training Centre receives sufficient notice of cancellation (at least 48 hours), a refund of fees may be available. Cancellations within 48 hours may incur a 20% cancellation fee. No refund is given for non-attendance or cancellation on day of training. More information can be found on our website or a hard copy can be obtained from the office. A re-issue of certificates will incur a fee of $30.
For any further information contact Workplace Training Centre. The student information pack can be found on our website or by calling the office and will provide additional information about the course, responsibilities and a copy of the unit of competence.
To enrol or for more information contact us on: Phone: 1300 668 141 Email: [email protected] Web: www.workplacetrainingcentre.edu.au
www.workplacetrainingcentre.edu.au Unit 12 / 70 Holbeche Road Arndell Park NSW 2148
1300 668 141 RTO: 91390 2017.1
[email protected] ABN: 24127418106
