Dremel 8220 Collet Replacement

Dremel 8220 Collet Replacement

Dremel 8220 Collet Replacement If you find yourself unable to insert an attachment head into your device you likely need to replace the collet. This guide will show you how.

Rédigé par: connor anisko

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 4

Dremel 8220 Collet Replacement

INTRODUCTION This guide will show you how to replace a defective collet. By following a few simple steps, your collet can be replaced in approximately 5 minutes. No experience is required and only one tool is needed.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 4

Dremel 8220 Collet Replacement

Étape 1 — Collet 

Press and hold down on the gear lock button to lock the shaft.



With the lock held down, begin unscrewing the collar wrench.

Étape 2

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 3 de 4

Dremel 8220 Collet Replacement

Étape 3 

Remove the collet nut, and poke out the collet.

 If the collet is jammed in the collet nut, more force will need to be applied.

For dremel reassembly, follow the guide steps in reverse order. Ce document a été généré pour la dernière fois le 2017-09-25 01:33:18 PM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 4