For Use With PANDUIT WYR-GRID Pathway Systems INSTALLATION ...

For Use With PANDUIT WYR-GRID Pathway Systems

       

WYR-GRID HARDWARE KIT (SWEEPING BEND RADIUS) Panduit Part Number: WGHRDWKT**

   

INSTALLATION INSTRUCTIONS © 2011 PANDUIT Corp.

   

1

     

Inside Radius

   

   

 

PATHWAY      NUMBER OF WGHRDWKT      INSIDE RADIUS    WIDTH        NEEDED FOR 90 DEG. BEND      OF PATHWAY        12”                                 6                                    15.8”        18”                                 9                                    24.4”        24”                                12                                   33.4”        30”                                15                                   41.5”      2 

2

   

3

           

X Denotes Pathway Line Wires That Will Be Cut and Removed Cut Edges of Wires Must Not Extend Beyond .100”

 

   

For Technical Assistance, Call: 800-777-3300  

 

 

INSTALLATION INSTRUCTIONS

 

  WYR-GRID HARDWARE KIT ( SWEEPING BEND RADIUS) – Typical Installation Continued…

4

Only One Pathway Line Wire Remains Uncut

5

  6

Snap WYR-GRID Strap Bracket Onto Pathway

Attach WYR-GRID Hardware Clip Assembly Using ¼-20 x1 Hex Head Cap Screw Torque Specifications: 75 in/Lbs (8.5 n٠M)

Instruction Sheet RW279

 

WORLDWIDE SUBSIDIARIES AND SALES OFFICES   18900 Panduit Drive Tinley Park, IL 60487 Web Site: www.panduit.com

RACK SYSTEMS DIVISION

Fax: 708‐532‐1811  Technical Support: 800‐777‐3300  E‐mail: [email protected]