Table of Contents - Architectural Area Lighting
Accessories
DATE
TYPE
PAGE 1 OF 4
Table of Contents Accessories
Photocell Options Egress Other Accessories
SOLD TO
PO #
JOB NAME / /
Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
APPROVALS
Accessories
DATE
TYPE
PAGE 2 OF 4
PHOTOCELL
q
q
PCA-C
PCA-T
TENON LENGTH Tenon length will vary per WILL VARY PER fixture type FIXTURE TYPE
8.69" 8.6875 220mm 220mm
TENON LENGTH Tenon length will vary per WILL VARY PER FIXTURE TYPE fixture type
9" 9 229mm 229mm
||
||
4.125" 4.125 104mm 104mm
4" 4 /100mm 100mm
||
||
4 DIA. POLE 4" DIA. Pole ||
4˝ DIA. POLE 4" DIA. Pole
Rotatable photocell housing. The photocell can be aimed away from stray light sources for an accurate setting. The photocell is also shielded from light emissions from the fixture. The housing slips over a 4"/100mm O.D. pole. a fixture or arm slips over the 4"/100mm O.D. tenon. Includes an internal twist lock receptacle, and an access cover with integral lens and stainless steel tether. Adds 4.5"/114mm to the overall height of the pole/fixture assembly. Prewired on the load side and line side for easy installation. Photocell by others.
Rotatable photocell housing. The photocell can be aimed away from stray light sources for an accurate setting. The photocell is also shielded from light emissions from the fixture. The housing slips over a 4"/100mm O.D. pole. a fixture slips over the 4"/100mm O.D. tenon. Includes an internal twist lock receptacle, and an access cover with integral lens and stainless steel tether. Adds 5"/125mm to the overall height of the pole/fixture assembly. Prewired on the load side and line side for easy installation. Photocell by others.
EGRESS
q
q
EPA-C CONTEMPORARY
EPA-T TRADITIONAL
4"
12"
14.5"
4”
9"
8.625"
4.875"
Secures to pole with six (6) stainless steel screws
The Contemporary Egress Post Top Adapter can be integrated into an existing non-egress-fitted pole application to provide code-required egress illumination. This adapter features 360° rotation for easy field adjustments. It also features an adjustable bracket that can be positioned between 15-45°, so concise, direct illumination can be provided onto the path of egress. The Egress PTA is wired to an auxiliary 120 volt power source that activates the lower-wattage MR16 in the event of an emergency or power interruption. The housing slips over a 4"/100mm O.D. pole. It includes an access cover with an integral lens and a lanyard safety cable. The contemporary model is 14 1/2" tall, but only adds 3 5/8" to the overall height of the pole. Prewired on both the load side and line side for easy installation.
SOLD TO
PO #
JOB NAME / /
Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
Secures to pole with three (3) stainless steel screws
The Traditional Egress Post Top Adapter can be integrated into an existing non-egress-fitted pole application to provide code-required egress illumination. This adapter features 360° rotation for easy field adjustments. It also features an adjustable bracket that can be positioned between 15-45 degrees, so concise, direct illumination can be provided onto the path of egress. The Egress PTA is wired to an auxiliary 120 volt power source that activates the lower-wattage MR16 in the event of an emergency or power interruption. The housing slips over a 4"/100mm O.D. pole. It includes an access cover with an integral lens and a lanyard safety cable. The traditional model is 12" tall, but only adds 3 5/8" to the overall height of the pole. Prewired on both the load side and line side for easy installation. APPROVALS
Accessories q
DATE
q
BPC12 - BPC27
TYPE
PAGE 3 OF 4
q
PHC
Low profile twist lock photocell receptacle with cast pole cap top. Secures to the top of the pole with three stainless steel set screws. Photocell by others.
Button type photocell and cast shield. Standard location is 12" down from top of pole. POLE TOP Specify voltage.
Swivel type photocell with adjustable PHOTOCELL SWIVEL field wiring. swivel for aiming. Requires (BPC12 & BPC27) Consult factory for specific fixture availability.
PCR
POLE (REF.) 4" O.D. OR 5" O.D.
4.5" 4.5 in 114mm 114mm
12" 300mm (REF.)
1.5" 1.5 in 38mm 38mm
.8125 .8" in 21mm
21mm
PHOTOCELL SWIVEL
OTHER ACCESSORIES (BPC12 & BPC27)
q
POST TOP FIXTURES ONLY
q
LR
Ladder rest. Slips over a 4"/100mm O.D. pole
q
FH
Flag holder. (Specify location on pole)
Plant Hanger. For 4”/100mm O.D. poles. (Specify location on pole, holds up to 25 lbs.)
1" 1 in (ref.) 25mm 25mm
18.5" 18.5 in 470mm 470mm 3"3 in 76mm 76mm
1 in / 25.4mm 1"/25mm
PLT
10 in 10" 254mm 254mm
12" 12 in 305mm 305mm
.8" .8125 in 21mm 21mm
14.5" 14.5 in 370mm 370mm
13 in 13" 330mm 330mm
66" in 152mm 152mm .75 in .75" 20mm 20mm
q
RBC
Cast aluminum receptacle housing, integrally welded to the pole. Includes a NEC approved clear weatherproof in-use cover. Does not include a receptacle or internal wiring. (Standard RBC is 24" below the top of the pole. Consult factory for alternative locations, which may require additional factory reinforcement)
q
GFI (with RBC) Ground Fault Interrupter. Wet location receptacle. Standard location is 24" down from top of pole.
q
FS1 Single weatherproof fuse holder. Fuse by others.
q
FS2
Double weatherproof fuse holder. Fuse by others.
POLE TOP (REF.)
AD4
q
AD5
This adapter is to be used only with standard AAL arms and post top mount fixtures to slip over a 4"/100mm O.D. pole. This adapter is to be used only with standard AAL arms and post top mount fixtures that slip over a 4" O.D. pole. The AD5 is a cast aluminum adapter that slips into the arm or (PM option on the UCM) and slips over a 5"/125mm O.D. pole.
Note: Fuse supplied and installed by others.
RBC RBC
q
.4375 in diameter 11mm mounting hole (2) places
4" O.D
4.0 in O.D. 100mm 100mm
POLE TOP (REF.)
2.5" 2.50 in 64mm 64 mm
3.25" 3.25 in 83 mm 83mm
Hand Hand hole hole
12 " 300mm (REF.)
topof of pole pole Top
Standard standar d location location
1212" in 305mm
POLE (REF.)
305mm
WATER PROOF COVER
24" 24.0 in 610mm 610 mm
6 in6" 153mm 153mm
GFI DUPLEX RECEPTACLE (REF.)
5.50 in 5.5" 140 mm 140mm
FRONT VIEW
SOLD TO
SADDLE (REF.)
PO #
JOB NAME / /
Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
SIDE VIEW
5"inO.D 5.0 O.D. 152mm 152mm
APPROVALS
Accessories
DATE
TYPE
PAGE 4 OF 4
BANNER ARMS BREAKAWAY ARMS CATALOG NO. BANNER ARMS q BBS4-12 q BBS4-18 q BBS4-24 q BBS4-30 q BBS5-12 q BBS5-18 q BBS5-24 q BBS5-30 q BBD4-12 q BBD4-18 q BBD4-24 q BBD4-30 q BBD5-12 q BBD5-18 q BBD5-24 q BBD5-30
CATALOG NO. BANNER ARMS q BSQ4-12 q BSQ4-18 q BSQ4-24 q BSQ4-30
Single assembly for 4" O.D. pole, 12" arm. Single assembly for 4" O.D. pole, 18" arm. Single assembly for 4" O.D. pole, 24" arm. Single assembly for 4" O.D. pole, 30" arm. Single assembly for 5" O.D. pole, 12" arm. Single assembly for 5" O.D. pole, 18" arm. Single assembly for 5" O.D. pole, 24" arm. Single assembly for 5" O.D. pole, 30" arm. Twin assembly for 4" O.D. pole, 12" arms. (2) Twin assembly for 4" O.D. pole, 18" arms. (2) Twin assembly for 4" O.D. pole, 24" arms. (2) Twin assembly for 4" O.D. pole, 30" arms. (2) Twin assembly for 5" O.D. pole, 12" arms. (2) Twin assembly for 5" O.D. pole, 18" arms. (2) Twin assembly for 5" O.D. pole, 24" arms. (2) Twin assembly for 5" O.D. pole, 30" arms. (2)
Single Single Single Single
assembly assembly assembly assembly
SQ. SQ. SQ. SQ.
pole, pole, pole, pole,
12" 18" 24" 30"
arm. arm. arm. arm.
Replacement
REPLACEMEN NT coupling COUPLING
1.06" Tubing
Replacement
1.06" Tubing
tnemecalpeR TNEMECA LPER ilpOuCoc GNILgPnU
tnemecalpeR TNEMECA LPER GNILgPnUilpOuCoc Replacement
REPLACEMENT coupling COUPLING
12", 18", 24"
12,18, or 2430" or 30 in ARM GTH ArmLENG Length
REPLACEMEN NT coupling COUPLING
12", 18", 24"
12,18, or 2430" or 30 in ARM N TH T ArmLENG Length
"42 ,"81 ,"21
ni 03"r0o34r2o ,81,21 MrRAA hHtTgGnNeELLm
BBS BBS
12", 18", 24"
12,18, or 2430" or 30 in ARM GTH ArmLENG Length
4" 4" 4" 4"
Note: For square poles, Specify banner arms location on pole.
Replacement
REPLACEMENT coupling COUPLING
for for for for
BSQ
BSQ
12", 18", 24"
Square pole
12,18, 24 eorca30 in tnor em30" lpeR ARM LENG TLPQES TNEM EN CATH RB Arm Length GNILgPnUilpOuCoc
Round pole
BBS
BSQ
"42 ,"81 ,"21
"ni 03 "r0 o342ro,81,21
hHtTg mRrAA GnNeEL LM
12", 18", 24"
12,18,or2430" or 30 in" Arm ARM Length LENG GTH
12", 18", 24"
Replacement
"42 ,"81 ,"21
"42 ,"81 ,"21
REPLACEMENT couplCOUPLIing NG
ni 03"r0o34r2o ,81,21 H MrRAA htTgGnNeELLm
QSB
SIDE VIEW Side view
WeEiIvV e ED S w diIS
ylbmessA niwT
Twin Assembly "42 ,"81 ,"21
Twin Assembly BBD
tnemecalpeR
TNEMECA LPESRBB ilpOuCoc GNILgPnU
12,18,or2430" or 30 in" Arm ARM Length LENG GTH
ni 03"r0o34r2o ,81,21 MrRAA hHtTgGnNeELLm
SIDE VIEW Side view
"42 ,"81 ,"21
ni 03"r0o34r2o ,81,21 H MrRAA htTgGnNeELLm
SBB
"ni 03 "r0 o342ro,81,21
hHtTg mRrAA GnNeEL LM
Twin Assembly
BBS (2)
DESCRIPTION
WeEiIvV e ED S w diIS
Two Arms
ylbmessA niwT
Round AAL banner arms are clamshell designs for 4"/100mm or 5"/125mm diameter poles. Banner arm for square pole is secured to the side of the pole with two bolts. The banner arms are easily added or removed from the pole. The breakaway coupling is designed to fail before over-stressing the pole. An internal, stainless steel cable keeps the arm attached to the pole assembly. The failure point for the coupling is affected by the banner type, pole height and vertical location of the banner on the pole. The loading is also affected by securing the banner at the top only, or the top and bottom. Contact the factory for the maximum banner size recommended for your application.
12", 18", 24"
SOLD TO
PO #
JOB NAME / /
Architectural Area Lighting
12,18,or2430"or 30 in ARMArmLENGTH LengtG h
APPROVALS
BBS
BS
16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
12", 18", 24" 12,18,or2430"or 30 in"
DATE
TYPE
PAGE 1 OF 4
Table of Contents Accessories
Photocell Options Egress Other Accessories
SOLD TO
PO #
JOB NAME / /
Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
APPROVALS
Accessories
DATE
TYPE
PAGE 2 OF 4
PHOTOCELL
q
q
PCA-C
PCA-T
TENON LENGTH Tenon length will vary per WILL VARY PER fixture type FIXTURE TYPE
8.69" 8.6875 220mm 220mm
TENON LENGTH Tenon length will vary per WILL VARY PER FIXTURE TYPE fixture type
9" 9 229mm 229mm
||
||
4.125" 4.125 104mm 104mm
4" 4 /100mm 100mm
||
||
4 DIA. POLE 4" DIA. Pole ||
4˝ DIA. POLE 4" DIA. Pole
Rotatable photocell housing. The photocell can be aimed away from stray light sources for an accurate setting. The photocell is also shielded from light emissions from the fixture. The housing slips over a 4"/100mm O.D. pole. a fixture or arm slips over the 4"/100mm O.D. tenon. Includes an internal twist lock receptacle, and an access cover with integral lens and stainless steel tether. Adds 4.5"/114mm to the overall height of the pole/fixture assembly. Prewired on the load side and line side for easy installation. Photocell by others.
Rotatable photocell housing. The photocell can be aimed away from stray light sources for an accurate setting. The photocell is also shielded from light emissions from the fixture. The housing slips over a 4"/100mm O.D. pole. a fixture slips over the 4"/100mm O.D. tenon. Includes an internal twist lock receptacle, and an access cover with integral lens and stainless steel tether. Adds 5"/125mm to the overall height of the pole/fixture assembly. Prewired on the load side and line side for easy installation. Photocell by others.
EGRESS
q
q
EPA-C CONTEMPORARY
EPA-T TRADITIONAL
4"
12"
14.5"
4”
9"
8.625"
4.875"
Secures to pole with six (6) stainless steel screws
The Contemporary Egress Post Top Adapter can be integrated into an existing non-egress-fitted pole application to provide code-required egress illumination. This adapter features 360° rotation for easy field adjustments. It also features an adjustable bracket that can be positioned between 15-45°, so concise, direct illumination can be provided onto the path of egress. The Egress PTA is wired to an auxiliary 120 volt power source that activates the lower-wattage MR16 in the event of an emergency or power interruption. The housing slips over a 4"/100mm O.D. pole. It includes an access cover with an integral lens and a lanyard safety cable. The contemporary model is 14 1/2" tall, but only adds 3 5/8" to the overall height of the pole. Prewired on both the load side and line side for easy installation.
SOLD TO
PO #
JOB NAME / /
Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
Secures to pole with three (3) stainless steel screws
The Traditional Egress Post Top Adapter can be integrated into an existing non-egress-fitted pole application to provide code-required egress illumination. This adapter features 360° rotation for easy field adjustments. It also features an adjustable bracket that can be positioned between 15-45 degrees, so concise, direct illumination can be provided onto the path of egress. The Egress PTA is wired to an auxiliary 120 volt power source that activates the lower-wattage MR16 in the event of an emergency or power interruption. The housing slips over a 4"/100mm O.D. pole. It includes an access cover with an integral lens and a lanyard safety cable. The traditional model is 12" tall, but only adds 3 5/8" to the overall height of the pole. Prewired on both the load side and line side for easy installation. APPROVALS
Accessories q
DATE
q
BPC12 - BPC27
TYPE
PAGE 3 OF 4
q
PHC
Low profile twist lock photocell receptacle with cast pole cap top. Secures to the top of the pole with three stainless steel set screws. Photocell by others.
Button type photocell and cast shield. Standard location is 12" down from top of pole. POLE TOP Specify voltage.
Swivel type photocell with adjustable PHOTOCELL SWIVEL field wiring. swivel for aiming. Requires (BPC12 & BPC27) Consult factory for specific fixture availability.
PCR
POLE (REF.) 4" O.D. OR 5" O.D.
4.5" 4.5 in 114mm 114mm
12" 300mm (REF.)
1.5" 1.5 in 38mm 38mm
.8125 .8" in 21mm
21mm
PHOTOCELL SWIVEL
OTHER ACCESSORIES (BPC12 & BPC27)
q
POST TOP FIXTURES ONLY
q
LR
Ladder rest. Slips over a 4"/100mm O.D. pole
q
FH
Flag holder. (Specify location on pole)
Plant Hanger. For 4”/100mm O.D. poles. (Specify location on pole, holds up to 25 lbs.)
1" 1 in (ref.) 25mm 25mm
18.5" 18.5 in 470mm 470mm 3"3 in 76mm 76mm
1 in / 25.4mm 1"/25mm
PLT
10 in 10" 254mm 254mm
12" 12 in 305mm 305mm
.8" .8125 in 21mm 21mm
14.5" 14.5 in 370mm 370mm
13 in 13" 330mm 330mm
66" in 152mm 152mm .75 in .75" 20mm 20mm
q
RBC
Cast aluminum receptacle housing, integrally welded to the pole. Includes a NEC approved clear weatherproof in-use cover. Does not include a receptacle or internal wiring. (Standard RBC is 24" below the top of the pole. Consult factory for alternative locations, which may require additional factory reinforcement)
q
GFI (with RBC) Ground Fault Interrupter. Wet location receptacle. Standard location is 24" down from top of pole.
q
FS1 Single weatherproof fuse holder. Fuse by others.
q
FS2
Double weatherproof fuse holder. Fuse by others.
POLE TOP (REF.)
AD4
q
AD5
This adapter is to be used only with standard AAL arms and post top mount fixtures to slip over a 4"/100mm O.D. pole. This adapter is to be used only with standard AAL arms and post top mount fixtures that slip over a 4" O.D. pole. The AD5 is a cast aluminum adapter that slips into the arm or (PM option on the UCM) and slips over a 5"/125mm O.D. pole.
Note: Fuse supplied and installed by others.
RBC RBC
q
.4375 in diameter 11mm mounting hole (2) places
4" O.D
4.0 in O.D. 100mm 100mm
POLE TOP (REF.)
2.5" 2.50 in 64mm 64 mm
3.25" 3.25 in 83 mm 83mm
Hand Hand hole hole
12 " 300mm (REF.)
topof of pole pole Top
Standard standar d location location
1212" in 305mm
POLE (REF.)
305mm
WATER PROOF COVER
24" 24.0 in 610mm 610 mm
6 in6" 153mm 153mm
GFI DUPLEX RECEPTACLE (REF.)
5.50 in 5.5" 140 mm 140mm
FRONT VIEW
SOLD TO
SADDLE (REF.)
PO #
JOB NAME / /
Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
SIDE VIEW
5"inO.D 5.0 O.D. 152mm 152mm
APPROVALS
Accessories
DATE
TYPE
PAGE 4 OF 4
BANNER ARMS BREAKAWAY ARMS CATALOG NO. BANNER ARMS q BBS4-12 q BBS4-18 q BBS4-24 q BBS4-30 q BBS5-12 q BBS5-18 q BBS5-24 q BBS5-30 q BBD4-12 q BBD4-18 q BBD4-24 q BBD4-30 q BBD5-12 q BBD5-18 q BBD5-24 q BBD5-30
CATALOG NO. BANNER ARMS q BSQ4-12 q BSQ4-18 q BSQ4-24 q BSQ4-30
Single assembly for 4" O.D. pole, 12" arm. Single assembly for 4" O.D. pole, 18" arm. Single assembly for 4" O.D. pole, 24" arm. Single assembly for 4" O.D. pole, 30" arm. Single assembly for 5" O.D. pole, 12" arm. Single assembly for 5" O.D. pole, 18" arm. Single assembly for 5" O.D. pole, 24" arm. Single assembly for 5" O.D. pole, 30" arm. Twin assembly for 4" O.D. pole, 12" arms. (2) Twin assembly for 4" O.D. pole, 18" arms. (2) Twin assembly for 4" O.D. pole, 24" arms. (2) Twin assembly for 4" O.D. pole, 30" arms. (2) Twin assembly for 5" O.D. pole, 12" arms. (2) Twin assembly for 5" O.D. pole, 18" arms. (2) Twin assembly for 5" O.D. pole, 24" arms. (2) Twin assembly for 5" O.D. pole, 30" arms. (2)
Single Single Single Single
assembly assembly assembly assembly
SQ. SQ. SQ. SQ.
pole, pole, pole, pole,
12" 18" 24" 30"
arm. arm. arm. arm.
Replacement
REPLACEMEN NT coupling COUPLING
1.06" Tubing
Replacement
1.06" Tubing
tnemecalpeR TNEMECA LPER ilpOuCoc GNILgPnU
tnemecalpeR TNEMECA LPER GNILgPnUilpOuCoc Replacement
REPLACEMENT coupling COUPLING
12", 18", 24"
12,18, or 2430" or 30 in ARM GTH ArmLENG Length
REPLACEMEN NT coupling COUPLING
12", 18", 24"
12,18, or 2430" or 30 in ARM N TH T ArmLENG Length
"42 ,"81 ,"21
ni 03"r0o34r2o ,81,21 MrRAA hHtTgGnNeELLm
BBS BBS
12", 18", 24"
12,18, or 2430" or 30 in ARM GTH ArmLENG Length
4" 4" 4" 4"
Note: For square poles, Specify banner arms location on pole.
Replacement
REPLACEMENT coupling COUPLING
for for for for
BSQ
BSQ
12", 18", 24"
Square pole
12,18, 24 eorca30 in tnor em30" lpeR ARM LENG TLPQES TNEM EN CATH RB Arm Length GNILgPnUilpOuCoc
Round pole
BBS
BSQ
"42 ,"81 ,"21
"ni 03 "r0 o342ro,81,21
hHtTg mRrAA GnNeEL LM
12", 18", 24"
12,18,or2430" or 30 in" Arm ARM Length LENG GTH
12", 18", 24"
Replacement
"42 ,"81 ,"21
"42 ,"81 ,"21
REPLACEMENT couplCOUPLIing NG
ni 03"r0o34r2o ,81,21 H MrRAA htTgGnNeELLm
QSB
SIDE VIEW Side view
WeEiIvV e ED S w diIS
ylbmessA niwT
Twin Assembly "42 ,"81 ,"21
Twin Assembly BBD
tnemecalpeR
TNEMECA LPESRBB ilpOuCoc GNILgPnU
12,18,or2430" or 30 in" Arm ARM Length LENG GTH
ni 03"r0o34r2o ,81,21 MrRAA hHtTgGnNeELLm
SIDE VIEW Side view
"42 ,"81 ,"21
ni 03"r0o34r2o ,81,21 H MrRAA htTgGnNeELLm
SBB
"ni 03 "r0 o342ro,81,21
hHtTg mRrAA GnNeEL LM
Twin Assembly
BBS (2)
DESCRIPTION
WeEiIvV e ED S w diIS
Two Arms
ylbmessA niwT
Round AAL banner arms are clamshell designs for 4"/100mm or 5"/125mm diameter poles. Banner arm for square pole is secured to the side of the pole with two bolts. The banner arms are easily added or removed from the pole. The breakaway coupling is designed to fail before over-stressing the pole. An internal, stainless steel cable keeps the arm attached to the pole assembly. The failure point for the coupling is affected by the banner type, pole height and vertical location of the banner on the pole. The loading is also affected by securing the banner at the top only, or the top and bottom. Contact the factory for the maximum banner size recommended for your application.
12", 18", 24"
SOLD TO
PO #
JOB NAME / /
Architectural Area Lighting
12,18,or2430"or 30 in ARMArmLENGTH LengtG h
APPROVALS
BBS
BS
16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Design patents, Copyright © 2010 Rev 01/2012
12", 18", 24" 12,18,or2430"or 30 in"
