Duplo 490P Table Removal
DUPLO 490P HYDRAULIC PAPER CUTTER Table Removal Instructions
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Take the two small metal plates out from the tool bag that comes with each machine. Then follow these instructions. 1. Take off the front cover under the front table. 2. Take out the two inner hexangular black screws which tighten the front and back table together. 3. Loose the two screws which attach the front table and the main body frame. 4. The shaft under the front table is screw into the gear, please loose the bolt first, then remove the screw. 5. Now the front table is all loose and can be taken out. 6. Take off the two big silver screws under the front table. 7. Screw it onto the metal plate in the tool bag. 8. Screw the two plate in the two gap on the main frame, the edge of the plate need to be against the back table. 9. When the two plate is screw tight, loose all the screw which needs to take the back table out. 1. 2. 3. 4. 5. 6. 7.
When the machine is moved in the door. Put the back table back onto the main frame, push the back table to go against the two metal plate. Screw tight all the screws for the back table. Take off the two metal plate. Put back the front table, and screw back all the screws necessary. When its all done, check the square for the back gauge and make the adjustment. Put back the front cover under the front table.
Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Take the two small metal plates out from the tool bag that comes with each machine. Then follow these instructions. 1. Take off the front cover under the front table. 2. Take out the two inner hexangular black screws which tighten the front and back table together. 3. Loose the two screws which attach the front table and the main body frame. 4. The shaft under the front table is screw into the gear, please loose the bolt first, then remove the screw. 5. Now the front table is all loose and can be taken out. 6. Take off the two big silver screws under the front table. 7. Screw it onto the metal plate in the tool bag. 8. Screw the two plate in the two gap on the main frame, the edge of the plate need to be against the back table. 9. When the two plate is screw tight, loose all the screw which needs to take the back table out. 1. 2. 3. 4. 5. 6. 7.
When the machine is moved in the door. Put the back table back onto the main frame, push the back table to go against the two metal plate. Screw tight all the screws for the back table. Take off the two metal plate. Put back the front table, and screw back all the screws necessary. When its all done, check the square for the back gauge and make the adjustment. Put back the front cover under the front table.
