hvac ductwork submittal review #6
HVAC DUCTWORK SUBMITTAL REVIEW #6 Project: Architect: General Contractor: Mechanical Contractor: Date: Reviewed By:
Ridgeview Elementary Addition Comma Q Dick Anderson Construction Inc. Central Plumbing and Heating 07-21-2016 Christopher Doyle/Curt Smit
Submittal review is for compliance with the construction documents for the project. Regardless of comments or lack thereof, it is the responsibility of the contractor and supplier that all equipment meets or exceeds the project requirements. The contractor is responsible for specific project requirements including dimensions, quantities, access openings, access clearances, building equipment access, coordination with other trades, installation of all piping, ductwork and services for a complete and operational project. COMMENTS REVISE AND RESUBMIT 1. NO ITEMS AT THIS TIME. REVISE WITH NOTED CORRECTIONS (Submit Items indicated) 1. HIGH EFFICIENCY TAKEOFFS DO NOT NEED DAMPER. a. Dampers provided in Ductwork Accessories Submittal. REVIEWED AS SUBMITTED 1. SPIRAL DUCTWORK. 2. FLEXIBLE DUCTWORK. SUBMIT 1. NO ITEMS AT THIS TIME. END OF REVIEW
Ridgeview Elementary Addition
Page 1
233100-01.0
Letter of Transmittal To:
DICK ANDERSON CONST. BOZEMAN 4498 JACKRABBIT LN. BOZEMAN, MT 59718 Ph: (406)586-0889
233100 AH
Transmittal #: 6 Date: 7/8/2016 Job: 16-4003 Ridge View Elementary Addition
Subject: 233100 Ductwork WE ARE SENDING YOU
Attached
Under separate cover via None the following items:
Shop drawings
Prints
Plans
Samples
Copy of letter
Change order
Specifications
Submittals
Submittal
Copies 1
Date 7/8/16
233100
Spiral Ductwork
Submittal
1
7/8/16
233100
Flexible Ductwork
Submittal
1
7/8/16
233100
High Efficiency Take-Offs
Document Type
No.
Description
THESE ARE TRANSMITTED as checked below: For approval
Approved as submitted
Resubmit ___ copies for approval
For your use
Approved as noted
Submit ___ copies for distribution
As requested
Returned for corrections
Return ___ corrected prints
For review and comment
Other
FOR BIDS DUE
PRINTS RETURNED AFTER LOAN TO US
Remarks: Copy To:
From: MARCUS WILCOX
Signature: If enclosures are not as noted, kindly notify us at once.
Page 1 of 1
7/20/2016
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION PROJECT NAME:
Ridge View Elementary Expansion
SUBMITTAL DATE:
July 2016
ENGINEER:
C.D.S.
GENERAL CONTRACTOR:
Dick Anderson
SUBCONTRACTOR:
Central Plumbing & Heating
SUPPLIER:
Vemco Inc.
SUBMITTALS PREPARED BY:
Vemco Inc.
SUBMITTAL #:
233100
EQUIPMENT:
2.1 & 2.2 – Spiral Ductwork
MANUFACTURER:
Spiral-Tech
EQUIPMENT:
2.3 – Flexible Ductwork
MANUFACTURER:
Hart & Cooley
EQUIPMENT:
2.4 – High Efficiency Take-Offs
MANUFACTURER:
Sheet Metal Connectors
________________________________________________________________ Notes:
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION By CHRISTOPHER P. DOYLE at 1:31 pm, Jul 21, 2016
SECTION 233100 – DUCTWORK 2.1 & 2.2 – SPIRAL DUCTWORK Spiral-Tech galvanized spiral duct with fittings constructed per SMACNA standards. •
Fabricate and supply medium pressure spiral pipe and fittings from square to rounds downstream to connection to VAV boxes.
•
Fabricate and supply low pressure spiral pipe and fittings from low pressure HETO’s downstream to approximately 3’ from diffuser to allow for a flexible connection this includes elbows down to diffusers.
•
All material is quoted as single wall galvanized construction.
•
Connections are quoted as slip fit with coupling.
•
Elbows are quoted as rigid type not adjustable.
Page 1
Customer: SHT #
P Med
Project:
Vemco-Bozeman Type E-90
E-45
Red
Elt/taps
Elt
Qty 1 2 1 6 16 2 4 2 2 2 2 4 12 6 4 1 1 1 1 1 2 8 1 1 1 1 4 4 1 2 2 1 1 1 2 2 1 1 2 1 2
#
Notes
A 26 22 20 14 12 10 8 6 26 22 12 10 8 8 14 18 16 18 16 12 10 8 10 10 8 8 8 8 26 22 20 18 18 18 12 12 18 16 14 12 18
Ridge View Elementary
B
C
6 12 12 12 14 14 10 8 4 On22 On24 On24 On22 On40 On44 22 20 18 18 18 16 12 12 18 16 12 10 18
14 12 14 14 6 8 8 12 8 8 12 8 12
D
SH #1
SH #2
SH #3
BO
Page 2
Customer: SHT #
Project:
Vemco-Bozeman
P
Type
Qty
Med
Spiral
20’ 30’ 25’ 60’ 65’ 150’ 35’ 160’ 10’
26 22 20 18 14 12 10 8 6
Low
E-90
1 64 2 19 2 2 1 1 1 2
12 10 8 6 12 6 12 12 12 10
E-45 Red Elt
#
Notes
A
Ridge View Elementary
B
C
10 12 12 10
10 8 6
D
SH #1
SH #2
SH #3
BO
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Spiral Pipe
Round Duct Positive Gauge Standards Diameter Pos 2" WG Spiral Long
Pos 4" WG Spiral Long
Pos 10" WG Spiral Long
6" & Under 8" 10" 12" 14" 16" 18"
26 26 26 26 26 24 24
26 26 26 26 26 24 24
26 26 26 24 24 22 22
19"-24" 25"-36" 37"-50" 51"-60" 61"-84"
24 22 20 18 16
24 22 20 18 18
20 20 20 18 18
Spiral-Tech, Inc is a manufacturer of Spiral Pipe, Fittings, and Accessories. Our product are built using the latest SMACNA standards. Spiral Pipe is fabricated using an air tight spiral lock seam. Fittings are assembled and sealed using various methods for required pressure class. Standard connection is slip fit. Although there is a wide variety of flange connections available.
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Round Spiral Fittings 90 Deg Elbow
60 Deg Elbow
E-90
E-60
45 Deg Elbow
30 Deg Elbow
E-45
E-30
90 Deg Tee
90 Deg Reducing Tee
T-1
RT-1
Notes: Die Stamped Elbows available in Galvanized, Stainless, and Aluminum in sizes 3-12 Mitered Elbows available in Galvanized, Stainless, Mild Steel, and Aluminum Standard elbow radius is 1.5 times the diameter to centerline
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Round Spiral Fittings 45 Deg Lateral
45 Deg Reducing Lateral
L-1
RL-2
90 Deg Conical Tee
90 Deg Reducing Conical Tee
C-1
RC-1
90 Deg Elongated Tee
90 Deg Elongated Reducing Tee
Elt-1
Relt-1
Notes: Fittings available in Galvanized, Stainless, Mild Steel, and Aluminum Fittings available in straight, and reducing 180 degree crosses Fittings with reducing ends available with eccentric reducers
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Round Spiral Fittings Offset
45 Wye Y-45
90 Deg Wye
Bullhead Tee
Y-90
BT
Reducer
Eccentric Reducer
R
ER
Notes: Fittings available in Galvanized, Stainless, Mild Steel, and Aluminum Fittings available in straight, and reducing 180 degree crosses Wye fittings available in both straight, and reducing Wye fittings also available with offsetting legs
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SECTION 233100 – DUCTWORK 2.3 – FLEXIBLE DUCTWORK Hart & Cooley model F296 insulated flexible duct, UL listed, NFPA standards 90A & 90B, fiberglass reinforced film vapor barrier, R-6.0 fiberglass insulation, polyester film liner and steel wire helix. 150’ required – 6” diameter 25’ required – 8” diameter 375’ required – 10” diameter
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION SECTION 233100 – DUCTWORK
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
2.4 – HIGH EFFICIENCY TAKE-OFFS Sheet Metal Connectors high efficiency take-off fittings with 45° angle and 1” flange. 2 required – 6” diameter 3 required – 8” diameter 33 required – 10” diameter 1 required – 12” diameter
High Efficiency Die Stamped Takeoff (Super Heto) This Highly Engineered Take-Off brings a new meaning to “Hi Efficiency”. The Super HETO’S body is pressed from a single piece of steel giving it perfectly smooth radius corners. This design allows the maximum amount of air to flow downstream making the system much easier to balance and saves energy. The Super HETO comes with and without volume dampers. The adjustable dampers are assembled using a spring loaded retractable bearing and positive locking hardware.
• 22 Gauge Galvanized Solid Body Construction (ASTM A653)
Super Heto
Order as follows: A = Diameter
• 3/4” x 1/8” Polyethylene Double-face Gasket • Manufactured to conform to SMACNA 2005 Duct Construction Standards • Solid Body Reduces Leakage meeting SMACNA / ASHRAE Leakage Class 3
• Testing Performed by Intertek-ETL-Semko
Super Heto with Damper Order as follows: A = Diameter
• Available with and without Volume Dampers • Available with Insulation Standoffs and Insulation Extensions • Patent # US D571,908 S
REVIEWED AS NOTED By CHRISTOPHER P. DOYLE at 3:07 pm, Jan 20, 2016
5” 6” 8” 10” 12” 14”
Overall Length 10 1/2” 6 1/2” 7” 7” 7” 7”
All Fittings are 1.75” from Bead to End of Fitting.
• Complete Seal Connection Standard • Engineered to the Highest Standards test data available
A
A
6” 7” 8” 9” 10” 12” 14”
Overall Length 6 1/2” 10” 7” 10 3/4” 7” 7” 7”
All Fittings are 1.75” from Bead to End of Fitting.
Super Heto with 2” Extension Order as follows: A = Diameter
HIGH EFFICIENCY TAKEOFFS SO NOT NEED DAMPER AS DAMPERS ARE PROVIDED IN DUCT ACCESSORIES SUBMITTAL.
Super Heto with 2” Standoff Order as follows: A = Diameter
A
6” 7” 8” 9” 10” 12” 14”
Overall Length 6 1/2” 10” 7” 10 3/4” 7” 7” 7”
All Fittings are 1.75” from Bead to End of Fitting.
A
Overall Length
6” 8” 10” 12” 14”
8” 9” 9” 9” 9”
All Fittings are 1.75” from Bead to End of Fitting.
850 Revised 07/11
Ridgeview Elementary Addition Comma Q Dick Anderson Construction Inc. Central Plumbing and Heating 07-21-2016 Christopher Doyle/Curt Smit
Submittal review is for compliance with the construction documents for the project. Regardless of comments or lack thereof, it is the responsibility of the contractor and supplier that all equipment meets or exceeds the project requirements. The contractor is responsible for specific project requirements including dimensions, quantities, access openings, access clearances, building equipment access, coordination with other trades, installation of all piping, ductwork and services for a complete and operational project. COMMENTS REVISE AND RESUBMIT 1. NO ITEMS AT THIS TIME. REVISE WITH NOTED CORRECTIONS (Submit Items indicated) 1. HIGH EFFICIENCY TAKEOFFS DO NOT NEED DAMPER. a. Dampers provided in Ductwork Accessories Submittal. REVIEWED AS SUBMITTED 1. SPIRAL DUCTWORK. 2. FLEXIBLE DUCTWORK. SUBMIT 1. NO ITEMS AT THIS TIME. END OF REVIEW
Ridgeview Elementary Addition
Page 1
233100-01.0
Letter of Transmittal To:
DICK ANDERSON CONST. BOZEMAN 4498 JACKRABBIT LN. BOZEMAN, MT 59718 Ph: (406)586-0889
233100 AH
Transmittal #: 6 Date: 7/8/2016 Job: 16-4003 Ridge View Elementary Addition
Subject: 233100 Ductwork WE ARE SENDING YOU
Attached
Under separate cover via None the following items:
Shop drawings
Prints
Plans
Samples
Copy of letter
Change order
Specifications
Submittals
Submittal
Copies 1
Date 7/8/16
233100
Spiral Ductwork
Submittal
1
7/8/16
233100
Flexible Ductwork
Submittal
1
7/8/16
233100
High Efficiency Take-Offs
Document Type
No.
Description
THESE ARE TRANSMITTED as checked below: For approval
Approved as submitted
Resubmit ___ copies for approval
For your use
Approved as noted
Submit ___ copies for distribution
As requested
Returned for corrections
Return ___ corrected prints
For review and comment
Other
FOR BIDS DUE
PRINTS RETURNED AFTER LOAN TO US
Remarks: Copy To:
From: MARCUS WILCOX
Signature: If enclosures are not as noted, kindly notify us at once.
Page 1 of 1
7/20/2016
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION PROJECT NAME:
Ridge View Elementary Expansion
SUBMITTAL DATE:
July 2016
ENGINEER:
C.D.S.
GENERAL CONTRACTOR:
Dick Anderson
SUBCONTRACTOR:
Central Plumbing & Heating
SUPPLIER:
Vemco Inc.
SUBMITTALS PREPARED BY:
Vemco Inc.
SUBMITTAL #:
233100
EQUIPMENT:
2.1 & 2.2 – Spiral Ductwork
MANUFACTURER:
Spiral-Tech
EQUIPMENT:
2.3 – Flexible Ductwork
MANUFACTURER:
Hart & Cooley
EQUIPMENT:
2.4 – High Efficiency Take-Offs
MANUFACTURER:
Sheet Metal Connectors
________________________________________________________________ Notes:
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION By CHRISTOPHER P. DOYLE at 1:31 pm, Jul 21, 2016
SECTION 233100 – DUCTWORK 2.1 & 2.2 – SPIRAL DUCTWORK Spiral-Tech galvanized spiral duct with fittings constructed per SMACNA standards. •
Fabricate and supply medium pressure spiral pipe and fittings from square to rounds downstream to connection to VAV boxes.
•
Fabricate and supply low pressure spiral pipe and fittings from low pressure HETO’s downstream to approximately 3’ from diffuser to allow for a flexible connection this includes elbows down to diffusers.
•
All material is quoted as single wall galvanized construction.
•
Connections are quoted as slip fit with coupling.
•
Elbows are quoted as rigid type not adjustable.
Page 1
Customer: SHT #
P Med
Project:
Vemco-Bozeman Type E-90
E-45
Red
Elt/taps
Elt
Qty 1 2 1 6 16 2 4 2 2 2 2 4 12 6 4 1 1 1 1 1 2 8 1 1 1 1 4 4 1 2 2 1 1 1 2 2 1 1 2 1 2
#
Notes
A 26 22 20 14 12 10 8 6 26 22 12 10 8 8 14 18 16 18 16 12 10 8 10 10 8 8 8 8 26 22 20 18 18 18 12 12 18 16 14 12 18
Ridge View Elementary
B
C
6 12 12 12 14 14 10 8 4 On22 On24 On24 On22 On40 On44 22 20 18 18 18 16 12 12 18 16 12 10 18
14 12 14 14 6 8 8 12 8 8 12 8 12
D
SH #1
SH #2
SH #3
BO
Page 2
Customer: SHT #
Project:
Vemco-Bozeman
P
Type
Qty
Med
Spiral
20’ 30’ 25’ 60’ 65’ 150’ 35’ 160’ 10’
26 22 20 18 14 12 10 8 6
Low
E-90
1 64 2 19 2 2 1 1 1 2
12 10 8 6 12 6 12 12 12 10
E-45 Red Elt
#
Notes
A
Ridge View Elementary
B
C
10 12 12 10
10 8 6
D
SH #1
SH #2
SH #3
BO
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Spiral Pipe
Round Duct Positive Gauge Standards Diameter Pos 2" WG Spiral Long
Pos 4" WG Spiral Long
Pos 10" WG Spiral Long
6" & Under 8" 10" 12" 14" 16" 18"
26 26 26 26 26 24 24
26 26 26 26 26 24 24
26 26 26 24 24 22 22
19"-24" 25"-36" 37"-50" 51"-60" 61"-84"
24 22 20 18 16
24 22 20 18 18
20 20 20 18 18
Spiral-Tech, Inc is a manufacturer of Spiral Pipe, Fittings, and Accessories. Our product are built using the latest SMACNA standards. Spiral Pipe is fabricated using an air tight spiral lock seam. Fittings are assembled and sealed using various methods for required pressure class. Standard connection is slip fit. Although there is a wide variety of flange connections available.
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Round Spiral Fittings 90 Deg Elbow
60 Deg Elbow
E-90
E-60
45 Deg Elbow
30 Deg Elbow
E-45
E-30
90 Deg Tee
90 Deg Reducing Tee
T-1
RT-1
Notes: Die Stamped Elbows available in Galvanized, Stainless, and Aluminum in sizes 3-12 Mitered Elbows available in Galvanized, Stainless, Mild Steel, and Aluminum Standard elbow radius is 1.5 times the diameter to centerline
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Round Spiral Fittings 45 Deg Lateral
45 Deg Reducing Lateral
L-1
RL-2
90 Deg Conical Tee
90 Deg Reducing Conical Tee
C-1
RC-1
90 Deg Elongated Tee
90 Deg Elongated Reducing Tee
Elt-1
Relt-1
Notes: Fittings available in Galvanized, Stainless, Mild Steel, and Aluminum Fittings available in straight, and reducing 180 degree crosses Fittings with reducing ends available with eccentric reducers
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SPIRAL-TECH, INC. Spiral Pipe, & Fittings 3595 South 700 West Salt Lake City, Utah 84119 Phone: (801) 261-7400 Fax: (801) 261-7465 Email: [email protected] Round Spiral Fittings Offset
45 Wye Y-45
90 Deg Wye
Bullhead Tee
Y-90
BT
Reducer
Eccentric Reducer
R
ER
Notes: Fittings available in Galvanized, Stainless, Mild Steel, and Aluminum Fittings available in straight, and reducing 180 degree crosses Wye fittings available in both straight, and reducing Wye fittings also available with offsetting legs
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
SECTION 233100 – DUCTWORK 2.3 – FLEXIBLE DUCTWORK Hart & Cooley model F296 insulated flexible duct, UL listed, NFPA standards 90A & 90B, fiberglass reinforced film vapor barrier, R-6.0 fiberglass insulation, polyester film liner and steel wire helix. 150’ required – 6” diameter 25’ required – 8” diameter 375’ required – 10” diameter
VEMCO INC. JULY 2016 PROJECT: RIDGE VIEW ELEMENTARY EXPANSION SECTION 233100 – DUCTWORK
By CHRISTOPHER P. DOYLE at 12:40 pm, Jul 21, 2016
2.4 – HIGH EFFICIENCY TAKE-OFFS Sheet Metal Connectors high efficiency take-off fittings with 45° angle and 1” flange. 2 required – 6” diameter 3 required – 8” diameter 33 required – 10” diameter 1 required – 12” diameter
High Efficiency Die Stamped Takeoff (Super Heto) This Highly Engineered Take-Off brings a new meaning to “Hi Efficiency”. The Super HETO’S body is pressed from a single piece of steel giving it perfectly smooth radius corners. This design allows the maximum amount of air to flow downstream making the system much easier to balance and saves energy. The Super HETO comes with and without volume dampers. The adjustable dampers are assembled using a spring loaded retractable bearing and positive locking hardware.
• 22 Gauge Galvanized Solid Body Construction (ASTM A653)
Super Heto
Order as follows: A = Diameter
• 3/4” x 1/8” Polyethylene Double-face Gasket • Manufactured to conform to SMACNA 2005 Duct Construction Standards • Solid Body Reduces Leakage meeting SMACNA / ASHRAE Leakage Class 3
• Testing Performed by Intertek-ETL-Semko
Super Heto with Damper Order as follows: A = Diameter
• Available with and without Volume Dampers • Available with Insulation Standoffs and Insulation Extensions • Patent # US D571,908 S
REVIEWED AS NOTED By CHRISTOPHER P. DOYLE at 3:07 pm, Jan 20, 2016
5” 6” 8” 10” 12” 14”
Overall Length 10 1/2” 6 1/2” 7” 7” 7” 7”
All Fittings are 1.75” from Bead to End of Fitting.
• Complete Seal Connection Standard • Engineered to the Highest Standards test data available
A
A
6” 7” 8” 9” 10” 12” 14”
Overall Length 6 1/2” 10” 7” 10 3/4” 7” 7” 7”
All Fittings are 1.75” from Bead to End of Fitting.
Super Heto with 2” Extension Order as follows: A = Diameter
HIGH EFFICIENCY TAKEOFFS SO NOT NEED DAMPER AS DAMPERS ARE PROVIDED IN DUCT ACCESSORIES SUBMITTAL.
Super Heto with 2” Standoff Order as follows: A = Diameter
A
6” 7” 8” 9” 10” 12” 14”
Overall Length 6 1/2” 10” 7” 10 3/4” 7” 7” 7”
All Fittings are 1.75” from Bead to End of Fitting.
A
Overall Length
6” 8” 10” 12” 14”
8” 9” 9” 9” 9”
All Fittings are 1.75” from Bead to End of Fitting.
850 Revised 07/11
