Lone Star
1 1/4 yards
1 3/4 yards
1 1/3 yards
1 1/2 yards
8”/47” x 47”
9”/53” x 53”
2 1/2 yards
2 1/4 yards 1 1/3 yard
2/3 yard 1 1/3 yard
2/3 yard
2/3 yard
5/8 yard
1/2 yard
Diamond 2 Fabric
1 1/3 yard
2/3 yard
2/3 yard
5/8 yard
1/2 yard
Diamond 3 Fabric
5/8 yard
1/2 yard
1/2 yard
3/8 yard
1/3 yard
Sashing
1/2 yard
1/2 yard
1/2 yard
1/3 yard
1/3 yard
Binding
www.hoopsisters.com
866.497.4068
[email protected]
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
Fusible Web (such as Heat and Bond Lite or Steam A Seam II)
Monofilament Thread
Embroidery Bobbin Thread
Water Soluble Thread, we recommend Vanish Lite from Superior
Thread 2 for shadows (a couple of shades darker than your Main Background Fabric)
Thread 1 for quilting that matches your Background Fabric
Polyester Embroidery Thread:
Additional Supplies Needed:
1 1/8 yards
1 1/4 yards
7”/42” x 42”
2/3 yard
5/8 yard
1 1/4 yards
7/8 yard
3/4 yard
6”/35” x 35” 1 7/8 yards
1/2 yard
1 yard
2/3 yard
2/3 yard
5”/30” x 30”
Diamond 1 Fabric
Backing Fabric
Main Star Background Background Fabric
Block Size/ Approx. Finished Quilt Size
8 yards
7 1/2 yards
7 yards
6 1/2 yards
4 yards
Battilizer (Varies based on hoop used)
Lone Star
Fabric Requirements using Diamond Digital Cut Files
2
1 1/8 yards
1 1/4 yards
1 3/4 yards
1 1/4 yards
1 1/3 yards
1 1/2 yards
7”/42” x 42”
8”/47” x 47”
9”/53” x 53”
1/2 yard
1/3 yard 1/2 yard
1/3 yard
1/4 yard
1/4 yard
1/4 yard
Diamond 2 Fabric
1/2 yard
1/3 yard
1/4 yard
1/4 yard
1/4 yard
Diamond 3 Fabric
Cut 6—1 3/8” strips x wof, then cut 1 3/8” segments on 45° angle
Cut 5—1 1/8” strips x wof, then cut 1 1/8” segments on 45° angle
Cut 5—15/16” strips x wof, then cut 15/16” segments on 45° angle. (if quilt ruler
8” Cut 7—1 1/2” strips x wof, then cut 1 1/2” segments on 45° angle
3
8 yards
7 1/2 yards
7 yards
6 1/2 yards
4 yards
Battilizer (Varies based on hoop used)
wof = Width of Fabric
1/2 yard
1/2 yard
1/2 yard
1/3 yard
1/3 yard
Binding
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
Fusible Web (such as Heat and Bond Lite or Steam A Seam II)
Monofilament Thread
Embroidery Bobbin Thread
Water Soluble Thread, we recommend Vanish Lite from Superior
9”
5/8 yard
1/2 yard
1/2 yard
3/8 yard
1/3 yard
Sashing
Cut 8—1 5/8” strips x wof, then cut 1 5/8” segments on 45° angle
Thread 2 for shadows (a couple of shades darker than your Main Background Fabric)
Thread 1 for quilting that matches your Background Fabric
Polyester Embroidery Thread:
Additional Supplies Needed:
does not have 15/16” marking, then cut 1” and have less space between diamonds or 7/8” and more space between diamonds.)
7”
6”
5”
To Rotary Cut Diamonds After Fusing (see page 7 regarding fusing
2 1/2 yards
2 1/4 yards
1/4 yard
1/4 yard
1 1/4 yards
7/8 yard
3/4 yard
6”/35” x 35” 1 7/8 yards
1/4 yard
1 yard
2/3 yard
2/3 yard
5”/30” x 30”
Diamond 1 Fabric
Backing Fabric
Main Star Background Background Fabric
Block Size/ Approx. Finished Quilt Size
Lone Star
Fabric Requirements with Rotary Cut Diamonds
Lone Star Block Size/ Main Approx. Background Finished Quilt Fabric Size
Star Backing Background Fabric and Diamond 1 Fabric
wof=width of fabric 5”/30” x 30”
Diamond 1 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 2 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond Sashing 3 Fabric– Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Binding
Fronts and backs can be mixed and matched.
Cut 3—6” x wof, from that cut: 12—6” x 6” & 8—6” x 4 1/2”. Cut 1—4 1/4” x wof, from that cut 4– 4¼” x 4¼”.
6”/35” x 35”
Cutting Instructions
Cut 3—7” x wof, from that cut: 12—7” x 7” & 8—7” x 5”.
Cut 1—6½” x wof, from that cut 8—6½” x 3¾”.
Cut 6—6” x wof, from that cut 36—6” x 6”.
Cut 2—6” x wof, from that cut 12—6” x 6” Cut 2—2½” x wof, from that cut 8—2½” x 6” (use scrap from 6” cut) and leave one strip x wof. Cut 1—7½” x wof, from that cut 8—7½” x 4¼”.
Cut 2—7” x Cut 1—5” x wof, from that wof, from that cut 12—7” x 7”. cut 4—5” x 5”. Cut 3—2¾” x wof, from that cut 8—2¾” x 7” and leave remainder in long strip.
Cut 6—7” x wof, from that cut 36—7” x 7”.
Cut 2—8” x wof, from that cut 6— 10” x 8”
Cut 2—8” x wof, from that cut 6— 10” x 8”
Cut 2—8” x wof, from that cut 6— 10” x 8”.
Fuse two fabrics wrong sides together to make 3—10” x 8” pieces.
Fuse two fabrics wrong sides together to make 3— 10” x 8” pieces.
Fuse two fabrics wrong sides together to make 3—10” x 8” pieces.
Cut 2—10” x wof, from that cut 6—11” x 10”.
Cut 2—10” x wof, from that cut 6—11” x 10”.
Cut 2—10” x wof, from that cut 6—11” x 10”.
Fuse two fabrics wrong sides together to make three 11” x 10” pieces.
Fuse two fabrics wrong sides together to make three 11” x 10” pieces.
Fuse two fabrics wrong sides together to make three 11” x 10” pieces.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
[email protected] 4
Lone Star Block Size/ Main Approx. Background Finished Quilt Fabric Size
Cutting Instructions
Star Backing Background Fabric and Diamond 1 Fabric
wof=width of fabric
Diamond 1 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 2 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 3 Sashing Fabric– Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Binding
Fronts and backs can be mixed and matched.
7”/42” x 42”
8”/47” x 47”
Cut 3—8” x Cut 1—9” x wof, from that wof, from that cut: 12—8” x cut 8—9” x 5”. 8”. Cut 3—8” x Cut 2—6” x wof, from that wof, from that cut 12—8” x 8” cut: 8—6” x and 8—3” x 8”. 8”. Cut 2—3” x Cut 1—5¾” x wof. wof, from that cut 4—5¾” x 5¾”
Cut 8—8” x wof, from that cut 36— 8” x 8”.
Cut 3—9” x wof, from that cut: 12—9” x 9”.
Cut 9—9” x wof, from that cut 36— 9” x 9”.
Cut 2—5½” x wof, from that cut 8—5½” x 10”.
Cut 2—6½”x Cut 3—9” x wof, from that wof, from that cut 8—6½” x cut 12—9” x 9”. 9”. Cut 1—3¼” x Cut 1—6¼” x wof, from that wof, from that cut 8—3¼” x cut 4—6¼” x 9” (using leftover fabric from 9” 6¼”. strips).
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Fuse two fabrics wrong sides together to make 3 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3—12” x 12” pieces.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Fuse two fabrics wrong sides together to make 3— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3—12” x 12” pieces.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 1—3½” x wof.
www.hoopsisters.com
866.497.4068
[email protected] 5
Lone Star Block Size/ Main Approx. Background Finished Quilt Fabric Size
Cutting Instructions
Star Backing Background Fabric and Diamond 1 Fabric
wof=width of fabric 9”/53” x 53”
Diamond 1 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 2 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 3 Sashing Fabric– Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Binding
Fronts and backs can be mixed and matched.
Cut 3—10” x wof, from that cut: 12—10” x 10”.
Cut 3—6” x wof, from that cut 8—6” x 11½”.
Cut 2—7¼” x wof, from that cut 8—7¼” x 10”.
Cut 3—10” x wof, from that cut 12—10” x 10”.
Cut 1—7” x Cut 2—3½” x wof, from that wof, from that cut 4—7” x 7”. cut 8—3½” x 10”.
Cut 9—10”x wof, from that cut 36— 10” x 10”.
Cut 4—12” x wof, from that cut 8—12” x 12”.
Cut 4—12” x wof, from that cut 8—12” x 12”.
Cut 4—12” x wof, from that cut 8—12” x 12”.
Fuse two fabrics wrong sides together to make 4— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 4— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 4—12” x 12” pieces.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 2—3¾” x
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
[email protected] 6
1 3/4 yards
1 1/3 yards
1 1/2 yards
8”/47” x 47”
9”/53” x 53”
2 1/2 yards
2 1/4 yards 1 1/3 yard
2/3 yard 1 1/3 yard
2/3 yard
2/3 yard
5/8 yard
1/2 yard
Diamond 2 Fabric
1 1/3 yard
2/3 yard
2/3 yard
5/8 yard
1/2 yard
Diamond 3 Fabric
5/8 yard
1/2 yard
1/2 yard
3/8 yard
1/3 yard
Sashing
1/2 yard
1/2 yard
1/2 yard
1/3 yard
1/3 yard
Binding
www.hoopsisters.com
866.497.4068
[email protected]
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
Fusible Web (such as Heat and Bond Lite or Steam A Seam II)
Monofilament Thread
Embroidery Bobbin Thread
Water Soluble Thread, we recommend Vanish Lite from Superior
Thread 2 for shadows (a couple of shades darker than your Main Background Fabric)
Thread 1 for quilting that matches your Background Fabric
Polyester Embroidery Thread:
Additional Supplies Needed:
1 1/8 yards
1 1/4 yards
7”/42” x 42”
2/3 yard
5/8 yard
1 1/4 yards
7/8 yard
3/4 yard
6”/35” x 35” 1 7/8 yards
1/2 yard
1 yard
2/3 yard
2/3 yard
5”/30” x 30”
Diamond 1 Fabric
Backing Fabric
Main Star Background Background Fabric
Block Size/ Approx. Finished Quilt Size
8 yards
7 1/2 yards
7 yards
6 1/2 yards
4 yards
Battilizer (Varies based on hoop used)
Lone Star
Fabric Requirements using Diamond Digital Cut Files
2
1 1/8 yards
1 1/4 yards
1 3/4 yards
1 1/4 yards
1 1/3 yards
1 1/2 yards
7”/42” x 42”
8”/47” x 47”
9”/53” x 53”
1/2 yard
1/3 yard 1/2 yard
1/3 yard
1/4 yard
1/4 yard
1/4 yard
Diamond 2 Fabric
1/2 yard
1/3 yard
1/4 yard
1/4 yard
1/4 yard
Diamond 3 Fabric
Cut 6—1 3/8” strips x wof, then cut 1 3/8” segments on 45° angle
Cut 5—1 1/8” strips x wof, then cut 1 1/8” segments on 45° angle
Cut 5—15/16” strips x wof, then cut 15/16” segments on 45° angle. (if quilt ruler
8” Cut 7—1 1/2” strips x wof, then cut 1 1/2” segments on 45° angle
3
8 yards
7 1/2 yards
7 yards
6 1/2 yards
4 yards
Battilizer (Varies based on hoop used)
wof = Width of Fabric
1/2 yard
1/2 yard
1/2 yard
1/3 yard
1/3 yard
Binding
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
Fusible Web (such as Heat and Bond Lite or Steam A Seam II)
Monofilament Thread
Embroidery Bobbin Thread
Water Soluble Thread, we recommend Vanish Lite from Superior
9”
5/8 yard
1/2 yard
1/2 yard
3/8 yard
1/3 yard
Sashing
Cut 8—1 5/8” strips x wof, then cut 1 5/8” segments on 45° angle
Thread 2 for shadows (a couple of shades darker than your Main Background Fabric)
Thread 1 for quilting that matches your Background Fabric
Polyester Embroidery Thread:
Additional Supplies Needed:
does not have 15/16” marking, then cut 1” and have less space between diamonds or 7/8” and more space between diamonds.)
7”
6”
5”
To Rotary Cut Diamonds After Fusing (see page 7 regarding fusing
2 1/2 yards
2 1/4 yards
1/4 yard
1/4 yard
1 1/4 yards
7/8 yard
3/4 yard
6”/35” x 35” 1 7/8 yards
1/4 yard
1 yard
2/3 yard
2/3 yard
5”/30” x 30”
Diamond 1 Fabric
Backing Fabric
Main Star Background Background Fabric
Block Size/ Approx. Finished Quilt Size
Lone Star
Fabric Requirements with Rotary Cut Diamonds
Lone Star Block Size/ Main Approx. Background Finished Quilt Fabric Size
Star Backing Background Fabric and Diamond 1 Fabric
wof=width of fabric 5”/30” x 30”
Diamond 1 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 2 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond Sashing 3 Fabric– Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Binding
Fronts and backs can be mixed and matched.
Cut 3—6” x wof, from that cut: 12—6” x 6” & 8—6” x 4 1/2”. Cut 1—4 1/4” x wof, from that cut 4– 4¼” x 4¼”.
6”/35” x 35”
Cutting Instructions
Cut 3—7” x wof, from that cut: 12—7” x 7” & 8—7” x 5”.
Cut 1—6½” x wof, from that cut 8—6½” x 3¾”.
Cut 6—6” x wof, from that cut 36—6” x 6”.
Cut 2—6” x wof, from that cut 12—6” x 6” Cut 2—2½” x wof, from that cut 8—2½” x 6” (use scrap from 6” cut) and leave one strip x wof. Cut 1—7½” x wof, from that cut 8—7½” x 4¼”.
Cut 2—7” x Cut 1—5” x wof, from that wof, from that cut 12—7” x 7”. cut 4—5” x 5”. Cut 3—2¾” x wof, from that cut 8—2¾” x 7” and leave remainder in long strip.
Cut 6—7” x wof, from that cut 36—7” x 7”.
Cut 2—8” x wof, from that cut 6— 10” x 8”
Cut 2—8” x wof, from that cut 6— 10” x 8”
Cut 2—8” x wof, from that cut 6— 10” x 8”.
Fuse two fabrics wrong sides together to make 3—10” x 8” pieces.
Fuse two fabrics wrong sides together to make 3— 10” x 8” pieces.
Fuse two fabrics wrong sides together to make 3—10” x 8” pieces.
Cut 2—10” x wof, from that cut 6—11” x 10”.
Cut 2—10” x wof, from that cut 6—11” x 10”.
Cut 2—10” x wof, from that cut 6—11” x 10”.
Fuse two fabrics wrong sides together to make three 11” x 10” pieces.
Fuse two fabrics wrong sides together to make three 11” x 10” pieces.
Fuse two fabrics wrong sides together to make three 11” x 10” pieces.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
[email protected] 4
Lone Star Block Size/ Main Approx. Background Finished Quilt Fabric Size
Cutting Instructions
Star Backing Background Fabric and Diamond 1 Fabric
wof=width of fabric
Diamond 1 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 2 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 3 Sashing Fabric– Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Binding
Fronts and backs can be mixed and matched.
7”/42” x 42”
8”/47” x 47”
Cut 3—8” x Cut 1—9” x wof, from that wof, from that cut: 12—8” x cut 8—9” x 5”. 8”. Cut 3—8” x Cut 2—6” x wof, from that wof, from that cut 12—8” x 8” cut: 8—6” x and 8—3” x 8”. 8”. Cut 2—3” x Cut 1—5¾” x wof. wof, from that cut 4—5¾” x 5¾”
Cut 8—8” x wof, from that cut 36— 8” x 8”.
Cut 3—9” x wof, from that cut: 12—9” x 9”.
Cut 9—9” x wof, from that cut 36— 9” x 9”.
Cut 2—5½” x wof, from that cut 8—5½” x 10”.
Cut 2—6½”x Cut 3—9” x wof, from that wof, from that cut 8—6½” x cut 12—9” x 9”. 9”. Cut 1—3¼” x Cut 1—6¼” x wof, from that wof, from that cut 8—3¼” x cut 4—6¼” x 9” (using leftover fabric from 9” 6¼”. strips).
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Fuse two fabrics wrong sides together to make 3 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3—12” x 12” pieces.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Cut 2—12” x wof, from that cut 6—12” x 12”.
Fuse two fabrics wrong sides together to make 3— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 3—12” x 12” pieces.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 1—3½” x wof.
www.hoopsisters.com
866.497.4068
[email protected] 5
Lone Star Block Size/ Main Approx. Background Finished Quilt Fabric Size
Cutting Instructions
Star Backing Background Fabric and Diamond 1 Fabric
wof=width of fabric 9”/53” x 53”
Diamond 1 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 2 Fabric – Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Diamond 3 Sashing Fabric– Digital Cut Files only (See Page 3 for Rotary Cut diamonds)
Binding
Fronts and backs can be mixed and matched.
Cut 3—10” x wof, from that cut: 12—10” x 10”.
Cut 3—6” x wof, from that cut 8—6” x 11½”.
Cut 2—7¼” x wof, from that cut 8—7¼” x 10”.
Cut 3—10” x wof, from that cut 12—10” x 10”.
Cut 1—7” x Cut 2—3½” x wof, from that wof, from that cut 4—7” x 7”. cut 8—3½” x 10”.
Cut 9—10”x wof, from that cut 36— 10” x 10”.
Cut 4—12” x wof, from that cut 8—12” x 12”.
Cut 4—12” x wof, from that cut 8—12” x 12”.
Cut 4—12” x wof, from that cut 8—12” x 12”.
Fuse two fabrics wrong sides together to make 4— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 4— 12” x 12” pieces.
Fuse two fabrics wrong sides together to make 4—12” x 12” pieces.
Cut 1½” strips using ruler side of Trimmer 2.0.
Cut 2½” strips using ruler side of Trimmer 2.0.
Cut 2—3¾” x
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
[email protected] 6
