TiVo Series 2 TCD540080 Power Supply Replacement - AWS
TiVo Series 2 TCD540080 Power Supply Replacement
TiVo Series 2 TCD540080 Power Supply Replacement Replace a broken TiVo power supply.
撰写者: Svyatoslav Markeyev
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
工具: T10 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 1 — Removal of TiVo Series 2 TCD540080 Case
Power down the TiVo and detach the power cable from the rear of the unit.
Wait 5 minutes for the unit to fully discharge before proceeding to the next step.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
Remove the five T10 screws from the rear of the case using the Torx screwdriver.
3 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 3
Lift up and pull back the outer casing towards the rear of the unit.
步骤 4 — Power Supply
Carefully remove the ribbon cable from the power supply. Hold the ribbon on both sides and pull up.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 5
Disconnect the hard drive power cable. Firmly grip the white power connector and pull away from the hard drive.
Do not pull on the power cables when disconnecting power connector.
步骤 6
© iFixit — CC BY-NC-SA
zh.iFixit.com
Rotate the device 180 degrees and remove the two T10 screws from the power supply board.
5 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 7
Remove the four plastic standoffs.
Use pliers to squeeze the plastic pieces on the head together. Carefully press down on the standoff and pull up on the power supply.
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 8
Lift the power supply out of the unit.
Do not touch any circuit elements or capacitors on the power supply, as they may hold a charge after the unit has been shut off.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-11-11 04:08:11 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
7 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement Replace a broken TiVo power supply.
撰写者: Svyatoslav Markeyev
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
工具: T10 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 1 — Removal of TiVo Series 2 TCD540080 Case
Power down the TiVo and detach the power cable from the rear of the unit.
Wait 5 minutes for the unit to fully discharge before proceeding to the next step.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
Remove the five T10 screws from the rear of the case using the Torx screwdriver.
3 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 3
Lift up and pull back the outer casing towards the rear of the unit.
步骤 4 — Power Supply
Carefully remove the ribbon cable from the power supply. Hold the ribbon on both sides and pull up.
© iFixit — CC BY-NC-SA
zh.iFixit.com
4 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 5
Disconnect the hard drive power cable. Firmly grip the white power connector and pull away from the hard drive.
Do not pull on the power cables when disconnecting power connector.
步骤 6
© iFixit — CC BY-NC-SA
zh.iFixit.com
Rotate the device 180 degrees and remove the two T10 screws from the power supply board.
5 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 7
Remove the four plastic standoffs.
Use pliers to squeeze the plastic pieces on the head together. Carefully press down on the standoff and pull up on the power supply.
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 7 页
TiVo Series 2 TCD540080 Power Supply Replacement
步骤 8
Lift the power supply out of the unit.
Do not touch any circuit elements or capacitors on the power supply, as they may hold a charge after the unit has been shut off.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-11-11 04:08:11 AM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
7 / 7 页
