Bearing Inspection Report
Bearing Inspection Report
KapStone Paper Cowpens, SC PT-2
LNP Press Roll
Monday - February 29, 2016
Bearing Inspection Report
End User KapStone Paper
Contact Scott Bolf
Address 139 Price Farm Road
City, State, Zip Cowpens, SC, 29330
Phone (704) 555-1212
E-mail [email protected]
Distributor
Vendor
Applied Industrial Technologies
Contact
Contact
Jamie Willis
Billy Willis
Address
Address
620 Buffington Rd.
3100 McDonald Avenue
City, State, Zip
City, State, Zip
Spartanburg, SC, 29303
Ruston, LA, 71270
Phone
Phone
(864) 288-9080
318-255-2000
E-mail
E-mail
[email protected]
[email protected]
SKF TM/ IS
Vendor Job #
Derek Bergeson / Bobby Dwayne Scott
Equipment
Xerium
G-100587
Application
Serial#
LNP Press Roll PT-2
Inspection Date: 2016-02-25
Travel Time: 10 hours
Inspection Time: 1.5 hours
As always, we appreciate the opportunity to be of service. Please contact me if you have any questions and/or/comments. Kind Regards, Bobby Dwayne Scott Pulp and Paper Specialist - SKF
http://www.SKF.com
Garner, NC 27529 / (919) 670-6389
[email protected] Inspected by Dillon Hedges
This report is confidential and proprietary to SKF and may not be disclosed to any third party without the express written consent of SKF. Use of this report is limited to the sole purpose for which it was provided.
Tending Bearing Inspection KapStone Paper
PT-2
Recommendations:
Reuse Bearing
LNP Press Roll
Remanufacture Bearing
Replace Bearing
Bearing is a candidate for repair and can be sent to SKF for refurbishment. Remanufacturing level will be determined upon receipt & disassembly at SKF, per SKF. Bearing Nomenclature:
Inner Race Rotation
Outer Race Rotation
SKF 232/500 CAK/C08 W507 "K" 2013
Comments: Review transportation and storage procedures. Review recent oil analysis reports. Inspect the lubrication filtration system. Consider using a dehydrator on the oil reservoir.
Inspection Findings: Outer Ring Outside Diameter (OD)
Inner Ring Bore
5.3.3.2 - Fretting corrosion - Minor
5.3.3.2 - Fretting corrosion - Minor
Outer Ring Raceway (ORR)
Rolling Elements
5.2.2 - Abrasive wear - Minor
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor 5.3.3.3 - False brinelling - Minor 5.3.2 - Moisture corrosion - Minor
5.3.3.3 - False brinelling - Minor
Inner Ring Raceway (IRR)
Cage
5.2.2 - Abrasive wear - Minor
Normal
5.3.3.3 - False brinelling - Minor 5.3.2 - Moisture corrosion - Minor
Lubrication: oil
Tending Bearing Images Outer Ring Outside Diameter Photo 1
Outer Ring Outside Diameter Photo 2 5.3.3.2 - Fretting corrosion - Minor
Tending Bearing Images Outer Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor
Outer Ring Raceway Photo 2 5.5.3 - Indentation from debris - Minor
Tending Bearing Images Inner Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
Tending Bearing Images Inner Ring Bore Photo 1 5.3.3.2 - Fretting corrosion - Minor
Tending Bearing Images Rolling Elements Photo 1 5.2.2 - Abrasive wear - Minor
Rolling Elements Photo 2 5.3.3.3 - False brinelling - Minor
Drive Bearing Inspection KapStone Paper
PT-2
Recommendations:
Reuse Bearing
LNP Press Roll
Remanufacture Bearing
Replace Bearing
Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material, and protected during storage prior to re-installation on journal bearing seat, per SKF. Bearing Nomenclature:
Inner Race Rotation
Outer Race Rotation
TIMKEN 232/500K W33 W45A W840 REMAN: R9#99-3901-R2-P
Comments: Review transportation and storage procedures. Review recent oil analysis reports. Inspect the lubrication filtration system. Scotchbrite all indications and thoroughly clean the bearing. Rotate load zone and reinstall bearing.
Inspection Findings: Outer Ring Outside Diameter (OD)
Inner Ring Bore
5.3.3.2 - Fretting corrosion - Minor
5.3.3.2 - Fretting corrosion - Minor
Outer Ring Raceway (ORR)
Rolling Elements
5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
Inner Ring Raceway (IRR)
Cage
5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
Normal
Lubrication: oil
Drive Bearing Images Outer Ring Outside Diameter Photo 1
Outer Ring Outside Diameter Photo 2 5.3.3.2 - Fretting corrosion - Minor
Drive Bearing Images Outer Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor
Outer Ring Raceway Photo 2
Drive Bearing Images Inner Ring Raceway Photo 1
Drive Bearing Images Inner Ring Bore Photo 1 5.3.3.2 - Fretting corrosion - Minor
Drive Bearing Images Rolling Elements Photo 1
Rolling Elements Photo 2
KapStone Paper Cowpens, SC PT-2
LNP Press Roll
Monday - February 29, 2016
Bearing Inspection Report
End User KapStone Paper
Contact Scott Bolf
Address 139 Price Farm Road
City, State, Zip Cowpens, SC, 29330
Phone (704) 555-1212
E-mail [email protected]
Distributor
Vendor
Applied Industrial Technologies
Contact
Contact
Jamie Willis
Billy Willis
Address
Address
620 Buffington Rd.
3100 McDonald Avenue
City, State, Zip
City, State, Zip
Spartanburg, SC, 29303
Ruston, LA, 71270
Phone
Phone
(864) 288-9080
318-255-2000
[email protected]
[email protected]
SKF TM/ IS
Vendor Job #
Derek Bergeson / Bobby Dwayne Scott
Equipment
Xerium
G-100587
Application
Serial#
LNP Press Roll PT-2
Inspection Date: 2016-02-25
Travel Time: 10 hours
Inspection Time: 1.5 hours
As always, we appreciate the opportunity to be of service. Please contact me if you have any questions and/or/comments. Kind Regards, Bobby Dwayne Scott Pulp and Paper Specialist - SKF
http://www.SKF.com
Garner, NC 27529 / (919) 670-6389
[email protected] Inspected by Dillon Hedges
This report is confidential and proprietary to SKF and may not be disclosed to any third party without the express written consent of SKF. Use of this report is limited to the sole purpose for which it was provided.
Tending Bearing Inspection KapStone Paper
PT-2
Recommendations:
Reuse Bearing
LNP Press Roll
Remanufacture Bearing
Replace Bearing
Bearing is a candidate for repair and can be sent to SKF for refurbishment. Remanufacturing level will be determined upon receipt & disassembly at SKF, per SKF. Bearing Nomenclature:
Inner Race Rotation
Outer Race Rotation
SKF 232/500 CAK/C08 W507 "K" 2013
Comments: Review transportation and storage procedures. Review recent oil analysis reports. Inspect the lubrication filtration system. Consider using a dehydrator on the oil reservoir.
Inspection Findings: Outer Ring Outside Diameter (OD)
Inner Ring Bore
5.3.3.2 - Fretting corrosion - Minor
5.3.3.2 - Fretting corrosion - Minor
Outer Ring Raceway (ORR)
Rolling Elements
5.2.2 - Abrasive wear - Minor
5.2.2 - Abrasive wear - Minor
5.5.3 - Indentation from debris - Minor 5.3.3.3 - False brinelling - Minor 5.3.2 - Moisture corrosion - Minor
5.3.3.3 - False brinelling - Minor
Inner Ring Raceway (IRR)
Cage
5.2.2 - Abrasive wear - Minor
Normal
5.3.3.3 - False brinelling - Minor 5.3.2 - Moisture corrosion - Minor
Lubrication: oil
Tending Bearing Images Outer Ring Outside Diameter Photo 1
Outer Ring Outside Diameter Photo 2 5.3.3.2 - Fretting corrosion - Minor
Tending Bearing Images Outer Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor
Outer Ring Raceway Photo 2 5.5.3 - Indentation from debris - Minor
Tending Bearing Images Inner Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
Tending Bearing Images Inner Ring Bore Photo 1 5.3.3.2 - Fretting corrosion - Minor
Tending Bearing Images Rolling Elements Photo 1 5.2.2 - Abrasive wear - Minor
Rolling Elements Photo 2 5.3.3.3 - False brinelling - Minor
Drive Bearing Inspection KapStone Paper
PT-2
Recommendations:
Reuse Bearing
LNP Press Roll
Remanufacture Bearing
Replace Bearing
Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material, and protected during storage prior to re-installation on journal bearing seat, per SKF. Bearing Nomenclature:
Inner Race Rotation
Outer Race Rotation
TIMKEN 232/500K W33 W45A W840 REMAN: R9#99-3901-R2-P
Comments: Review transportation and storage procedures. Review recent oil analysis reports. Inspect the lubrication filtration system. Scotchbrite all indications and thoroughly clean the bearing. Rotate load zone and reinstall bearing.
Inspection Findings: Outer Ring Outside Diameter (OD)
Inner Ring Bore
5.3.3.2 - Fretting corrosion - Minor
5.3.3.2 - Fretting corrosion - Minor
Outer Ring Raceway (ORR)
Rolling Elements
5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
Inner Ring Raceway (IRR)
Cage
5.2.2 - Abrasive wear - Minor 5.3.3.3 - False brinelling - Minor
Normal
Lubrication: oil
Drive Bearing Images Outer Ring Outside Diameter Photo 1
Outer Ring Outside Diameter Photo 2 5.3.3.2 - Fretting corrosion - Minor
Drive Bearing Images Outer Ring Raceway Photo 1 5.2.2 - Abrasive wear - Minor
Outer Ring Raceway Photo 2
Drive Bearing Images Inner Ring Raceway Photo 1
Drive Bearing Images Inner Ring Bore Photo 1 5.3.3.2 - Fretting corrosion - Minor
Drive Bearing Images Rolling Elements Photo 1
Rolling Elements Photo 2
