g7 single-station strength - The Green Fitness Equipment Company
glute_091123.indd 1
11/24/09 1:57 PM
REV. 1.1 PA RT # 0 0 0 0 0 8 8 2 1 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 GLUTE
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
GLUTE PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
MAINTENANCE CHECKLIST
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
80”L X 38”W x 54”H 544 lbs
Shipping weight
511 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S78 GLUTE
Step 1 Frame Detail
UNPACKING G7-S78 GLUTE
Item Z09 Z02 Z03 B24 B20 Q11
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your MATRIX G7-S78 GLUTE is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Description Screw (M10X85L) Screw (M10X30L) Lock Washer Flat Washer (M10) Nylon Nut (M10) Screw (M8X75L)
Qty 2 2 4 8 4 4
CAUTION
The weight of the G7-S78 GLUTE is 372 lbs. (169 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 199 lbs. (90.2 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable base, properly level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user weight for this machine is300 lbs.
Lift the aluminum wing and top cover, then take apart the front and rear shields. Q11 bolts won't be used anymore for the wing and cover re-assembly. Q11 Q11 Q11Q11
60
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench
Z09 Z03 B24 Z03
Z02 Z03 B24
B24 B24 B20
B20
Step 2 Connect Detail Z08
Z03 B24
B24
B20
Item Z01 Z02 Z03 Z08 B24 B20 Z23
B20
If any items are missing please contact your country’s local MATRIX dealer for assistance. Z08
0mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Z03 B24
Description Screw (M10X75L) Screw (M10X30L) Lock Washer Screw (M10X80L) Flat Washer (M10) Nylon Nut (M10) Arc-flat Washer
Qty 4 4 8 4 16 16 4
B24
160
Z23
Z02
B20 B24
B24 Z03
Z01 Z23 Z02
B20 B24
B24 Z03
Z23
Z01
Z02
Step 5
Step 3
Pedal Detail
Item C11 C49 M05 C54 C55 C53
C49
C11
Description Qty Thin Fixing Sleeve 2 Axle Sleeve 4 Thick Fixing Sleeve 2 2 Fixing Plate Internal C Clamp 2 Cap End 2
C55 M05C54
C49
C49
Pad Detail
Chest Pad Hand Pad
Hand Pad Z06
C53
C55 M05 C54
Item C51 C59 Z05 Z06
Description Special Screw Flat Washer (M8) Screw (M10X20L) Screw (M10X25L)
Qty 1 1 6 4
Item Z12
Description Qty Screw (M10X60L) 4
Z05
C53 Z05
C59
C11 C49
Step 4
C51
Step 6
Cable Routing Detail
Item Z10 C52 F07 B24 F05 F12 F13 F14 F06 B20 Z102 Z14
Description Qty 1 Screw (M10X110L) Pulley Cover 1 Screw £( X10XM8X46L) 4 5 Flat Washer (M10) Small Cam 1 Big Cam 1 2 Fixing Block 2 Flat Washer (M8) Stopper Plate 1 Nylon Nut(M10) 1 Fixing Pin 1 E Clip 1
Shield Detail
Lift the wing and top cover ,then assemble the front and rear shields to the frame. Z12 Z12
Cable
F13
F06 F07
F13
F07 F14 F12 F07
glute_091123.indd 2
B20 F07 B24
B24
B24
Z10
F13
Z14
Z102
F07
60
Z12 Z12
C52
B24
F05
Fixing Plate
Rubber Pad
11/24/09 1:57 PM
11/24/09 1:57 PM
REV. 1.1 PA RT # 0 0 0 0 0 8 8 2 1 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 GLUTE
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
GLUTE PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
MAINTENANCE CHECKLIST
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
80”L X 38”W x 54”H 544 lbs
Shipping weight
511 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S78 GLUTE
Step 1 Frame Detail
UNPACKING G7-S78 GLUTE
Item Z09 Z02 Z03 B24 B20 Q11
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your MATRIX G7-S78 GLUTE is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Description Screw (M10X85L) Screw (M10X30L) Lock Washer Flat Washer (M10) Nylon Nut (M10) Screw (M8X75L)
Qty 2 2 4 8 4 4
CAUTION
The weight of the G7-S78 GLUTE is 372 lbs. (169 kg) not including the weight stack. The weight stack tower is packaged completely assembled for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 199 lbs. (90.2 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable base, properly level the machine and leave at least two feet of clearance to enter and exit the machine. Maximum user weight for this machine is300 lbs.
Lift the aluminum wing and top cover, then take apart the front and rear shields. Q11 bolts won't be used anymore for the wing and cover re-assembly. Q11 Q11 Q11Q11
60
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench
Z09 Z03 B24 Z03
Z02 Z03 B24
B24 B24 B20
B20
Step 2 Connect Detail Z08
Z03 B24
B24
B20
Item Z01 Z02 Z03 Z08 B24 B20 Z23
B20
If any items are missing please contact your country’s local MATRIX dealer for assistance. Z08
0mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Z03 B24
Description Screw (M10X75L) Screw (M10X30L) Lock Washer Screw (M10X80L) Flat Washer (M10) Nylon Nut (M10) Arc-flat Washer
Qty 4 4 8 4 16 16 4
B24
160
Z23
Z02
B20 B24
B24 Z03
Z01 Z23 Z02
B20 B24
B24 Z03
Z23
Z01
Z02
Step 5
Step 3
Pedal Detail
Item C11 C49 M05 C54 C55 C53
C49
C11
Description Qty Thin Fixing Sleeve 2 Axle Sleeve 4 Thick Fixing Sleeve 2 2 Fixing Plate Internal C Clamp 2 Cap End 2
C55 M05C54
C49
C49
Pad Detail
Chest Pad Hand Pad
Hand Pad Z06
C53
C55 M05 C54
Item C51 C59 Z05 Z06
Description Special Screw Flat Washer (M8) Screw (M10X20L) Screw (M10X25L)
Qty 1 1 6 4
Item Z12
Description Qty Screw (M10X60L) 4
Z05
C53 Z05
C59
C11 C49
Step 4
C51
Step 6
Cable Routing Detail
Item Z10 C52 F07 B24 F05 F12 F13 F14 F06 B20 Z102 Z14
Description Qty 1 Screw (M10X110L) Pulley Cover 1 Screw £( X10XM8X46L) 4 5 Flat Washer (M10) Small Cam 1 Big Cam 1 2 Fixing Block 2 Flat Washer (M8) Stopper Plate 1 Nylon Nut(M10) 1 Fixing Pin 1 E Clip 1
Shield Detail
Lift the wing and top cover ,then assemble the front and rear shields to the frame. Z12 Z12
Cable
F13
F06 F07
F13
F07 F14 F12 F07
glute_091123.indd 2
B20 F07 B24
B24
B24
Z10
F13
Z14
Z102
F07
60
Z12 Z12
C52
B24
F05
Fixing Plate
Rubber Pad
11/24/09 1:57 PM
