g7 single-station strength - GymStore.com
back_extension_090925.indd 1
10/9/09 8:09 AM
REV. 1.0 PA RT # 0 0 0 0 0 8 8 2 1 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 BACK EXTENSION
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
TRICEPS PRESS PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
MAINTENANCE CHECKLIST
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
51”L X 47”W x 52”H 727 lbs
Shipping weight
675 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/cables/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S52 BACK EXTENSION
Step 1 Item F16 F17 F18 Q11 Z02 Z05 Z07 Z15
UNPACKING G7-S52 BACK EXTENSION
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your MATRIX G7-S52 BACK EXTENSION is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Z07 Z07
F18
F17
F18 F17
CAUTION
Q11
Z02 Z05 F16 Z05
F16 Z05
Z05 F16 Z05 Z05
Z02
Z15
Z05 Z15
10
20
30
40
50
F18
F17
F16 F18
F17
Step 2
60
70
80
90
100
110
120
130
140
150
Qty Description 2 Flat Washer(M8) 1 Small Pulley Cover 1 Wave Washer 1 Screw (M10X30L) 2 Screw(M8X20) Flat Washer(Φ10.5XΦ42X1.5T) 1
Item D20 D22 F12 F16 Z08 Z10
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm
60
F16 Z05
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench
Qty 10 8 6 4 4 10 2 2
Lift the aluminumn wing and top cover, then take apart the front and rear sheilds. Q11 bolts won't be used anymore for the wing and cover re-assembly. Q11
F17
The weight of the G7-S52 BACK EXTENSION is 675 lbs. (306 kg) not including the weight stack. The weight stack tower is packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 309 lbs. (140 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Description Screw (M10X30L) Flat Waher(M10) Lock Waher(M10) Screw (M8X75L) Nylon Nut (M10) Arc-Flat Washer Screw (M10X75L) Screw (M10X135L)
160
F16
Z10 F12 D22 Z08 D20
Z08 D20
Step 5
Step 3
Z07
F18
F17 F17
F18 F17
Z07
F18
Z07
F17
Z02
Description Qty Flat Waher(M10) 14 Lock Waher(M10) 6 Nylon Nut (M10) 7 Screw (M10X75L) 6 Screw (M10X45L) 1
F18
F17
Description
Qty
Z09
Screw (M8X60L)
4
Z09
F17 Z02 F17 Z02
Item
Lift the wing and top cover,then assemble the front and rear shields to the frame.
Z02
Z09 Z09
Z09
60
Z07
Item F17 F18 Z02 Z07 Z11
F17
Z11 F17
F17
Z02
able
Adjust
Rubber Pad
Fixing Plate
Step 4 Item Description
F17 Z13
F17 Z13
back_extension_090925.indd 2
F17 Z13
Qty
F17
Flat Waher(M10)
8
Z13
Screw (M10X15L)
8
F17 Z13
F17
10/9/09 8:09 AM
10/9/09 8:09 AM
REV. 1.0 PA RT # 0 0 0 0 0 8 8 2 1 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 BACK EXTENSION
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
TRICEPS PRESS PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
MAINTENANCE CHECKLIST
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
51”L X 47”W x 52”H 727 lbs
Shipping weight
675 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/cables/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S52 BACK EXTENSION
Step 1 Item F16 F17 F18 Q11 Z02 Z05 Z07 Z15
UNPACKING G7-S52 BACK EXTENSION
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your MATRIX G7-S52 BACK EXTENSION is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Z07 Z07
F18
F17
F18 F17
CAUTION
Q11
Z02 Z05 F16 Z05
F16 Z05
Z05 F16 Z05 Z05
Z02
Z15
Z05 Z15
10
20
30
40
50
F18
F17
F16 F18
F17
Step 2
60
70
80
90
100
110
120
130
140
150
Qty Description 2 Flat Washer(M8) 1 Small Pulley Cover 1 Wave Washer 1 Screw (M10X30L) 2 Screw(M8X20) Flat Washer(Φ10.5XΦ42X1.5T) 1
Item D20 D22 F12 F16 Z08 Z10
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm
60
F16 Z05
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench
Qty 10 8 6 4 4 10 2 2
Lift the aluminumn wing and top cover, then take apart the front and rear sheilds. Q11 bolts won't be used anymore for the wing and cover re-assembly. Q11
F17
The weight of the G7-S52 BACK EXTENSION is 675 lbs. (306 kg) not including the weight stack. The weight stack tower is packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 309 lbs. (140 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Description Screw (M10X30L) Flat Waher(M10) Lock Waher(M10) Screw (M8X75L) Nylon Nut (M10) Arc-Flat Washer Screw (M10X75L) Screw (M10X135L)
160
F16
Z10 F12 D22 Z08 D20
Z08 D20
Step 5
Step 3
Z07
F18
F17 F17
F18 F17
Z07
F18
Z07
F17
Z02
Description Qty Flat Waher(M10) 14 Lock Waher(M10) 6 Nylon Nut (M10) 7 Screw (M10X75L) 6 Screw (M10X45L) 1
F18
F17
Description
Qty
Z09
Screw (M8X60L)
4
Z09
F17 Z02 F17 Z02
Item
Lift the wing and top cover,then assemble the front and rear shields to the frame.
Z02
Z09 Z09
Z09
60
Z07
Item F17 F18 Z02 Z07 Z11
F17
Z11 F17
F17
Z02
able
Adjust
Rubber Pad
Fixing Plate
Step 4 Item Description
F17 Z13
F17 Z13
back_extension_090925.indd 2
F17 Z13
Qty
F17
Flat Waher(M10)
8
Z13
Screw (M10X15L)
8
F17 Z13
F17
10/9/09 8:09 AM
