Myers Plumbing & Heating, Inc. SUBMITTAL
Myers Plumbing & Heating, Inc.
SUBMITTAL
16825 Industrial Parkway
Phone: (517) 886-2255
Lansing, MI 48906
Fax: (517) 886-7854
No.
233713_01
TO:
The CSM Group 444 W Michigan Ave Kalamazoo, MI 49007 (Submitted via Procore Website)
ATTN:
Lisa Ruthruff
DATE:
06/29/16
PROJECT:
12-146 – Saint Jons Providence Medical Center Livingston
JOB NUMBER:
953194
Description Specification Name Specification Section Revision No. Manufacturer / Supplier / Sub Est. Lead Time Once Ordered
Diffusers, Registers & Grilles Diffusers, Registers & Grilles 233713 0 Price / S&Z Sheetmetal 4-5 Weeks
Item Description Diffusers, Registers & Grilles – Product Data
Myers Plumbing & Heating, Inc. Mechanical Contractors Lansing, MI
REVIEWED As to the general layout only. This review subject to approval by Architect and/or Engineer
By Jarrod Clark
Date 06/29/16
Type of Submittal Shop Drawing Product Data LEED Color Selection Close-Out Document
Spec. Sub Section 1.3.A
CSM Reference # 14146-350
P.O. Box 1155 Troy, MI 48099-1155 (248) 837-7000 FAX: (248) 837-7004
Livingston Ambulatory Facility Genoa Twp, MI Engineer: Diekema Hamann Customer: S&Z Sheet Metal, Inc. 5237 Commerce Road Flint, MI 48507 P.O. No.: 16131-01
Manufacturer
MAP Ref: PTR1601726 Salesman: Kevin McGuire Engineer Sales: Phil Long Project Management: Ian Smith Date: June 22, 2016
Estimated Lead Time
Material
Specification Section
(from receipt of approved submittal drawings or written release for fabrication)
Grilles, Registers & Diffusers
233713
4-5 Weeks
ENGINEER / CONTRACTOR NOTE(S): Verify room schedule for quantities, sizes & mounting prior to release for fabrication.
PO Box 1155, Troy, MI 48099-1155 (248) 837-7000 Fax (248) 837-7004
MAP Ref. No:
Engineer: Diekema/Hamann Arch & Engineer
PTR1601726
Sales Person: Kevin McGuire
Customer: S&Z Sheet Metal 5237 Commerce Road
Submittal Date:
Flint, MI 48507 PO No: 16131-01
6/21/2016
Drawing Date:
Livingston Ambulatory Facility Genoa Township, MI Mark
Model
Description Manufacturer: PRICE
SD-1
SMD/36/4A/2424/SR/B12
Steel louvered face ceiling diffuser with removable core, 1" lay-in "T" bar mounting frame for 24" x 24" ceiling grid, 4-way throw pattern, square-toround adaptor, B12 white baked enamel finish, neck size as scheduled.
SD-2
SMD/36/4A/2424/SR/B12
Steel louvered face ceiling diffuser with removable core, 1" lay-in "T" bar mounting frame for 24" x 24" ceiling grid, 4-way throw pattern, square-toround adaptor, B12 white baked enamel finish, neck size as scheduled.
SD-3
SMD/36/4A/2424/SR/B12
Steel louvered face ceiling diffuser with removable core, 1" lay-in "T" bar mounting frame for 24" x 24" ceiling grid, 4-way throw pattern, square-toround adaptor, B12 white baked enamel finish, neck size as scheduled.
LD-1
TBDI3100/FF/B12
"T" bar insulated slot diffuser with 1" slots with ice tong pattern controllers, fiber free insulation, B12 white baked finish, inlet size, length and number of slots as indicated on the schedule.
LD-2
JS220/21SM/UPI/XX/B12
Custom flow linear "jet" slot diffuser, 2" slot width, exposed frame surface mount complete with mounting brackets, type 'XX" mitered ends, Price model UP insulated plenums, B12 white baked enamel finish, black interior, and length, number slots and inlet size as scheduled.
RG-1
PDDR/3/2424/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 24" x 24" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
RG-2
80/F/LI/0/B12
1/2" x 1/2" x 1/2" cube core return or exhaust grille, B12 white baked enamel finish, no screw holes in frame for 1" lay-in "T" bar mounting, neck size as scheduled.
EG-1
PDDR/3/1212/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 12" x 12" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
EG-2
PDDR/3/2424/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 24" x 24" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
1
Livingston Ambulatory Facility Genoa Township, MI Mark
Model
Description
EG-3
PDDR/3/2424/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 24" x 24" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
ER-1
510Z/F/L/A/SW/B12
Steel exhaust grille with fixed airfoil blades set on 3/4" center, parallel to the long dimension, zero degree deflection, face screw surface mounting frame, B12 white baked enamel finish, neck size as scheduled.
ER-2
510Z/F/L/A/SW/B12
Steel exhaust grille with fixed airfoil blades set on 3/4" center, parallel to the long dimension, zero degree deflection, face screw surface mounting frame, B12 white baked enamel finish, neck size as scheduled.
2
Livingston Ambulatory Facility Genoa Township, MI Line
Location
Mark QTY
Neck Size
CFM
Remarks
M1.1 2
1000 Vestibule
RG-2
1
4
1001 Lobby
SD-2
2
6
1010 Corridor
RG-1
2
22 x 22
8
1006 IT/Elec.
ER-1
1
8 x6
150
10
1007 JC
ER-1
1
8 x6
75
12
1008 Men's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
14
1009 Women's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
16
1011 Corridor
LD-1
2
18
1011 Corridor
RG-1
1
20
1012 Corridor
LD-1
5
22
1012 Corridor
RG-1
1
24
2001 Lobby
SD-2
2
26
2001 Lobby
LD-2
1
264" x 1-Slot
1500
28
2006 IT/Elec. Rm.
ER-1
1
8 x6
150
30
2007 JC
ER-1
1
8 x6
150
32
2008 Men's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
34
2009 Women's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
36
2010 Corridor
SD-2
2
38
2010 Corridor
RG-1
1
40
2010A Corridor
SD-2
2
42
2010A Corridor
RG-1
2
44
2011 Bldg Mgmt. Off.
SD-2
1
18x18 x 8
100
46
3001 Lobby
SD-2
2
18x18 x 8
150
48
3006 IT/Elec. Rm.
ER-1
1
8 x6
150
50
3007 JC
ER-1
1
8 x6
75
52
3008 Men's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
54
3009 Women's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
46 x 22 18x18 x 8
150
48" x 3-Slot
125
8" inlet
120
8" Inlet
22 x 22 48" x 3-Slot 22 x 22
M1.2 18x18 x 8
150
18x18 x 8
(4) 48" boots w/ 10" inlet & (3) 24" blank-off sections
150
22 x 22 18x18 x 8
125
22 x 22
M1.3
3
Livingston Ambulatory Facility Genoa Township, MI Line
Location
Mark QTY
56
3010 Corridor
SD-2
4
58
3010 Corridor
RG-1
1
Neck Size 18x18 x 8
CFM 125
22 x 22
4
Remarks
SUMMARY Livingston Ambulatory Facility Genoa Township, MI Mark
Model No
EG-1
PDDR/3/1212/B12
ER-1
510Z/F/L/A/SW/B12
LD-1
TBDI3100/FF/B12
LD-2
JS220/21SM/UPI/XX/B12
RG-1
Quantity Remark
Neck Size 10 x 10
6
8 x6
6
Verify Tag & Size
48" x 3-Slot
7
8" Inlet
264" x 1-Slot
1
(4) 48" boots w/ 10" inlet & (3) 24" blank-off sec
PDDR/3/2424/B12
22 x 22
8
RG-2
80/F/LI/0/B12
46 x 22
1
SD-2
SMD/36/4A/2424/SR/B12
18x18 x 8
15
Total Quantity:
PAGE: 1
44
PDDR
Perforated Ceiling Diffuser
Submittal Sheet PDDR
Item Tag:
EG-1
Ducted Steel Perforated Flush Face Return Diffuser Ducted Return
Material:
Detail View:
Steel Construction
Finish: B12: White Powder Coat
Notes: Hinged, removable perforated faceplate with quick-release spring latches Frame 3: T-bar lay-in for 1" and 9/16" flat tee Maximum backpan height is 2" (51) Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory SUBMITTAL NO: 258531-A ENGINEER: CUSTOMER: DESCRIPTION: Perfor Diffuser,(Non)/Ducted Return-Flush Face,Stl PDDR//I/6//3/DCT/12/12////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
510Z
Louvered Steel Grille
Submittal Sheet 510Z
Item Tag:
ER-1
Louvered Steel Return Grille – 3/4" Blade Spacing, 0° Single Deflection
Core Style:
Fastening:
Single Deflection
A: Countersunk Screwholes with Screw
Border:
Material:
F
Steel
1 1/4" (32) Flat Frame
Finish: B12 - White Powder Coat
Notes: Blades parallel to Long dimension Roll formed blades on 3/4" (19) centers Comes with zero degree (0°) deflection blade lock Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Single Deflection Steel Grille, 0° Angle 510Z//I/8.000/6.000/F/L////A//SW/B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 258306 CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
TBDI3100
T-Bar Supply Diffuser
Submittal Sheet
Item Tag:
LD-1
TBDI3100 1" Slot with Ice-Tong Pattern Controller Module Length 48"
Slot Quantity 3
Material:
Width (W) 6"
Height (H) 11"
Insulation Options:
Plenum: Coated Steel Pattern Controllers: Extruded Aluminum Centre Tee: Extruded Aluminum
FF - Fiber Free Foam Insulation
Notes:
Finish:
3 Slot Diffuser 1" (25) Slot Width Pattern controllers are field adjustable to create horizontal or vertical air pattern For use with 1" (25) flat tee ceiling grid TBDI3 Endcaps are uninsulated Factory tolerance ± 1/32" (1)
Blades - B17: Black Powder Coat BFS: Black Face Surfaces Centre Tee - B12: White Powder Coat
PROJECT: Frauenshuh Livingston Ambulatory SUBMITTAL NO: 258602-B ENGINEER: CUSTOMER: DESCRIPTION: Insulat T-Bar Supp Diff, Ice-Tong Blades, 1" Slots TBDI3100//I/48/3//IMP/6x8.937//FF/BFS//B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
Nom. Inlet 8" OVAL = 6" x 8 15/16"
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
JS220
Custom Flow Linear Diffuser
Submittal Sheet JS220
Item Tag:
LD-2
Custom Flow Jet-Slot Linear Diffuser with 2" Slot S 2"
SlotQty 1 Slot
E W OpeningWidth* A H 5 9/16" 4 5/8" 5 1/4" 1 25/32" 2 11/16"
*Opening width dimension is outside of field built plenum with hemmed seam. If no plenum is used, this may be reduced by up to 1/4" (6). For Type P mounting see also ASP/JSP submittal.
1 Slot
Nominal Length = 264.000''
End Conditions
Border/Mounting
XX
21SM
Exposed Frame Surface Mount w/Mtg Bracket
C
Concealed Mounting Bracket
Factory Mitered both ends
End Condition Face Overall Length XX Nom. Length + 1/4" (6)
Material Extruded Aluminum Frame and Spacers Pattern Controllers are Heavy Gauge Steel
Finish Pattern Controllers: B17 Black Upper Frame to match diffuser face finish Diffuser Face: B12 White Powder Coat
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Custom Flow Jet-Slot Linear, 2" Slot JS220//I/264.000/1/21SM/STRAIGHT/0.000//XX/C////SPC//B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
Notes
SUBMITTAL NO: 258086-A CUSTOMER:
Minimum Length 12" (305) Maximum Section Length 120" (3048) For use with model UP/UPL plenums Concealed mounting brackets included SPC: Single layer pattern controllers (pattern adjustment only) See installation instruction II00028
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
Frauenshuh Livingston Ambulatory
6/21/2016
LD-2 Blank Off
UP
Universal Plenum
Submittal Sheet UP
Item Tag:
LD-2 Plenums
Universal Plenum
Application AS/JS 220
Application:
Custom Flow
Border Style:
21SM
Exposed Frame Surface Mount
Edge Style:
HEM
Hemmed
Nominal Width 5.25"
Slots 1
Notes: Coated steel construction
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Universal Plenum UP//I/JS220/21SM/1//48.000/5.25/14.00/10/HEM////// © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 260441 CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
PDDR
Perforated Ceiling Diffuser
Submittal Sheet PDDR
Item Tag:
RG-1
Non-Ducted Steel Perforated Flush Face Return Diffuser Plenum Return
Material:
Detail View:
Steel Construction
Finish: B12: White Powder Coat
Notes: Hinged, removable perforated faceplate with quick-release spring latches Frame 3: T-bar lay-in for 1" and 9/16" flat tee Maximum backpan height is 1 3/8” (35) Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory SUBMITTAL NO: 260645-A ENGINEER: CUSTOMER: DESCRIPTION: Perfor Diffuser,(Non)/Ducted Return-Flush Face,Stl PDDR//I/22/22/3/N-DCT/24/24////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
80
Egg Crate Grille
Submittal Sheet 80
Border:
Item Tag:
RG-2
Egg Crate Grille – 1/2" x 1/2" x 1/2" Core
Material:
F
Aluminum construction
1 1/4" (32) Flat Frame
Finish: B12 - White Powder Coat
Notes: 1/2" x 1/2" x 1/2" aluminum grid core Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Egg Crate Grille, 1/2" X 1/2" X 1/2" 80//I/46.000/22.000//LI/F//////48/24///0///////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 259683-C CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
SMD
Louvered Directional Diffuser
Submittal Sheet SMD
Steel Modular Directional Diffuser
Core Style:
Border:
Item Tag:
SD-2
4A
36
4-Way, Style A for Square Inlet Neck
T-Bar Lay-In 1" (25)
Notes:
Material:
Cores sized in increments of 3" (76) in both directions Directional core removable at diffuser face Factory tolerance ± 1/32" (1)
Plan View:
Steel Construction
Finish: B12: White Powder Coat
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Steel Louvered Directional Diffuser SMD//I/18/18/36/4A/24/24////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 258515-C CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
SUBMITTAL
16825 Industrial Parkway
Phone: (517) 886-2255
Lansing, MI 48906
Fax: (517) 886-7854
No.
233713_01
TO:
The CSM Group 444 W Michigan Ave Kalamazoo, MI 49007 (Submitted via Procore Website)
ATTN:
Lisa Ruthruff
DATE:
06/29/16
PROJECT:
12-146 – Saint Jons Providence Medical Center Livingston
JOB NUMBER:
953194
Description Specification Name Specification Section Revision No. Manufacturer / Supplier / Sub Est. Lead Time Once Ordered
Diffusers, Registers & Grilles Diffusers, Registers & Grilles 233713 0 Price / S&Z Sheetmetal 4-5 Weeks
Item Description Diffusers, Registers & Grilles – Product Data
Myers Plumbing & Heating, Inc. Mechanical Contractors Lansing, MI
REVIEWED As to the general layout only. This review subject to approval by Architect and/or Engineer
By Jarrod Clark
Date 06/29/16
Type of Submittal Shop Drawing Product Data LEED Color Selection Close-Out Document
Spec. Sub Section 1.3.A
CSM Reference # 14146-350
P.O. Box 1155 Troy, MI 48099-1155 (248) 837-7000 FAX: (248) 837-7004
Livingston Ambulatory Facility Genoa Twp, MI Engineer: Diekema Hamann Customer: S&Z Sheet Metal, Inc. 5237 Commerce Road Flint, MI 48507 P.O. No.: 16131-01
Manufacturer
MAP Ref: PTR1601726 Salesman: Kevin McGuire Engineer Sales: Phil Long Project Management: Ian Smith Date: June 22, 2016
Estimated Lead Time
Material
Specification Section
(from receipt of approved submittal drawings or written release for fabrication)
Grilles, Registers & Diffusers
233713
4-5 Weeks
ENGINEER / CONTRACTOR NOTE(S): Verify room schedule for quantities, sizes & mounting prior to release for fabrication.
PO Box 1155, Troy, MI 48099-1155 (248) 837-7000 Fax (248) 837-7004
MAP Ref. No:
Engineer: Diekema/Hamann Arch & Engineer
PTR1601726
Sales Person: Kevin McGuire
Customer: S&Z Sheet Metal 5237 Commerce Road
Submittal Date:
Flint, MI 48507 PO No: 16131-01
6/21/2016
Drawing Date:
Livingston Ambulatory Facility Genoa Township, MI Mark
Model
Description Manufacturer: PRICE
SD-1
SMD/36/4A/2424/SR/B12
Steel louvered face ceiling diffuser with removable core, 1" lay-in "T" bar mounting frame for 24" x 24" ceiling grid, 4-way throw pattern, square-toround adaptor, B12 white baked enamel finish, neck size as scheduled.
SD-2
SMD/36/4A/2424/SR/B12
Steel louvered face ceiling diffuser with removable core, 1" lay-in "T" bar mounting frame for 24" x 24" ceiling grid, 4-way throw pattern, square-toround adaptor, B12 white baked enamel finish, neck size as scheduled.
SD-3
SMD/36/4A/2424/SR/B12
Steel louvered face ceiling diffuser with removable core, 1" lay-in "T" bar mounting frame for 24" x 24" ceiling grid, 4-way throw pattern, square-toround adaptor, B12 white baked enamel finish, neck size as scheduled.
LD-1
TBDI3100/FF/B12
"T" bar insulated slot diffuser with 1" slots with ice tong pattern controllers, fiber free insulation, B12 white baked finish, inlet size, length and number of slots as indicated on the schedule.
LD-2
JS220/21SM/UPI/XX/B12
Custom flow linear "jet" slot diffuser, 2" slot width, exposed frame surface mount complete with mounting brackets, type 'XX" mitered ends, Price model UP insulated plenums, B12 white baked enamel finish, black interior, and length, number slots and inlet size as scheduled.
RG-1
PDDR/3/2424/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 24" x 24" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
RG-2
80/F/LI/0/B12
1/2" x 1/2" x 1/2" cube core return or exhaust grille, B12 white baked enamel finish, no screw holes in frame for 1" lay-in "T" bar mounting, neck size as scheduled.
EG-1
PDDR/3/1212/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 12" x 12" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
EG-2
PDDR/3/2424/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 24" x 24" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
1
Livingston Ambulatory Facility Genoa Township, MI Mark
Model
Description
EG-3
PDDR/3/2424/B12
Steel perforated face ceiling return air diffuser with removable face lay-in "T" bar mounting frame for 24" x 24" ceiling grid, B12 white baked enamel finish, neck size as scheduled.
ER-1
510Z/F/L/A/SW/B12
Steel exhaust grille with fixed airfoil blades set on 3/4" center, parallel to the long dimension, zero degree deflection, face screw surface mounting frame, B12 white baked enamel finish, neck size as scheduled.
ER-2
510Z/F/L/A/SW/B12
Steel exhaust grille with fixed airfoil blades set on 3/4" center, parallel to the long dimension, zero degree deflection, face screw surface mounting frame, B12 white baked enamel finish, neck size as scheduled.
2
Livingston Ambulatory Facility Genoa Township, MI Line
Location
Mark QTY
Neck Size
CFM
Remarks
M1.1 2
1000 Vestibule
RG-2
1
4
1001 Lobby
SD-2
2
6
1010 Corridor
RG-1
2
22 x 22
8
1006 IT/Elec.
ER-1
1
8 x6
150
10
1007 JC
ER-1
1
8 x6
75
12
1008 Men's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
14
1009 Women's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
16
1011 Corridor
LD-1
2
18
1011 Corridor
RG-1
1
20
1012 Corridor
LD-1
5
22
1012 Corridor
RG-1
1
24
2001 Lobby
SD-2
2
26
2001 Lobby
LD-2
1
264" x 1-Slot
1500
28
2006 IT/Elec. Rm.
ER-1
1
8 x6
150
30
2007 JC
ER-1
1
8 x6
150
32
2008 Men's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
34
2009 Women's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
36
2010 Corridor
SD-2
2
38
2010 Corridor
RG-1
1
40
2010A Corridor
SD-2
2
42
2010A Corridor
RG-1
2
44
2011 Bldg Mgmt. Off.
SD-2
1
18x18 x 8
100
46
3001 Lobby
SD-2
2
18x18 x 8
150
48
3006 IT/Elec. Rm.
ER-1
1
8 x6
150
50
3007 JC
ER-1
1
8 x6
75
52
3008 Men's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
54
3009 Women's Toilet
EG-1
1
10 x 10
75
Verify Tag & Size
46 x 22 18x18 x 8
150
48" x 3-Slot
125
8" inlet
120
8" Inlet
22 x 22 48" x 3-Slot 22 x 22
M1.2 18x18 x 8
150
18x18 x 8
(4) 48" boots w/ 10" inlet & (3) 24" blank-off sections
150
22 x 22 18x18 x 8
125
22 x 22
M1.3
3
Livingston Ambulatory Facility Genoa Township, MI Line
Location
Mark QTY
56
3010 Corridor
SD-2
4
58
3010 Corridor
RG-1
1
Neck Size 18x18 x 8
CFM 125
22 x 22
4
Remarks
SUMMARY Livingston Ambulatory Facility Genoa Township, MI Mark
Model No
EG-1
PDDR/3/1212/B12
ER-1
510Z/F/L/A/SW/B12
LD-1
TBDI3100/FF/B12
LD-2
JS220/21SM/UPI/XX/B12
RG-1
Quantity Remark
Neck Size 10 x 10
6
8 x6
6
Verify Tag & Size
48" x 3-Slot
7
8" Inlet
264" x 1-Slot
1
(4) 48" boots w/ 10" inlet & (3) 24" blank-off sec
PDDR/3/2424/B12
22 x 22
8
RG-2
80/F/LI/0/B12
46 x 22
1
SD-2
SMD/36/4A/2424/SR/B12
18x18 x 8
15
Total Quantity:
PAGE: 1
44
PDDR
Perforated Ceiling Diffuser
Submittal Sheet PDDR
Item Tag:
EG-1
Ducted Steel Perforated Flush Face Return Diffuser Ducted Return
Material:
Detail View:
Steel Construction
Finish: B12: White Powder Coat
Notes: Hinged, removable perforated faceplate with quick-release spring latches Frame 3: T-bar lay-in for 1" and 9/16" flat tee Maximum backpan height is 2" (51) Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory SUBMITTAL NO: 258531-A ENGINEER: CUSTOMER: DESCRIPTION: Perfor Diffuser,(Non)/Ducted Return-Flush Face,Stl PDDR//I/6//3/DCT/12/12////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
510Z
Louvered Steel Grille
Submittal Sheet 510Z
Item Tag:
ER-1
Louvered Steel Return Grille – 3/4" Blade Spacing, 0° Single Deflection
Core Style:
Fastening:
Single Deflection
A: Countersunk Screwholes with Screw
Border:
Material:
F
Steel
1 1/4" (32) Flat Frame
Finish: B12 - White Powder Coat
Notes: Blades parallel to Long dimension Roll formed blades on 3/4" (19) centers Comes with zero degree (0°) deflection blade lock Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Single Deflection Steel Grille, 0° Angle 510Z//I/8.000/6.000/F/L////A//SW/B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 258306 CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
TBDI3100
T-Bar Supply Diffuser
Submittal Sheet
Item Tag:
LD-1
TBDI3100 1" Slot with Ice-Tong Pattern Controller Module Length 48"
Slot Quantity 3
Material:
Width (W) 6"
Height (H) 11"
Insulation Options:
Plenum: Coated Steel Pattern Controllers: Extruded Aluminum Centre Tee: Extruded Aluminum
FF - Fiber Free Foam Insulation
Notes:
Finish:
3 Slot Diffuser 1" (25) Slot Width Pattern controllers are field adjustable to create horizontal or vertical air pattern For use with 1" (25) flat tee ceiling grid TBDI3 Endcaps are uninsulated Factory tolerance ± 1/32" (1)
Blades - B17: Black Powder Coat BFS: Black Face Surfaces Centre Tee - B12: White Powder Coat
PROJECT: Frauenshuh Livingston Ambulatory SUBMITTAL NO: 258602-B ENGINEER: CUSTOMER: DESCRIPTION: Insulat T-Bar Supp Diff, Ice-Tong Blades, 1" Slots TBDI3100//I/48/3//IMP/6x8.937//FF/BFS//B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
Nom. Inlet 8" OVAL = 6" x 8 15/16"
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
JS220
Custom Flow Linear Diffuser
Submittal Sheet JS220
Item Tag:
LD-2
Custom Flow Jet-Slot Linear Diffuser with 2" Slot S 2"
SlotQty 1 Slot
E W OpeningWidth* A H 5 9/16" 4 5/8" 5 1/4" 1 25/32" 2 11/16"
*Opening width dimension is outside of field built plenum with hemmed seam. If no plenum is used, this may be reduced by up to 1/4" (6). For Type P mounting see also ASP/JSP submittal.
1 Slot
Nominal Length = 264.000''
End Conditions
Border/Mounting
XX
21SM
Exposed Frame Surface Mount w/Mtg Bracket
C
Concealed Mounting Bracket
Factory Mitered both ends
End Condition Face Overall Length XX Nom. Length + 1/4" (6)
Material Extruded Aluminum Frame and Spacers Pattern Controllers are Heavy Gauge Steel
Finish Pattern Controllers: B17 Black Upper Frame to match diffuser face finish Diffuser Face: B12 White Powder Coat
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Custom Flow Jet-Slot Linear, 2" Slot JS220//I/264.000/1/21SM/STRAIGHT/0.000//XX/C////SPC//B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
Notes
SUBMITTAL NO: 258086-A CUSTOMER:
Minimum Length 12" (305) Maximum Section Length 120" (3048) For use with model UP/UPL plenums Concealed mounting brackets included SPC: Single layer pattern controllers (pattern adjustment only) See installation instruction II00028
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
Frauenshuh Livingston Ambulatory
6/21/2016
LD-2 Blank Off
UP
Universal Plenum
Submittal Sheet UP
Item Tag:
LD-2 Plenums
Universal Plenum
Application AS/JS 220
Application:
Custom Flow
Border Style:
21SM
Exposed Frame Surface Mount
Edge Style:
HEM
Hemmed
Nominal Width 5.25"
Slots 1
Notes: Coated steel construction
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Universal Plenum UP//I/JS220/21SM/1//48.000/5.25/14.00/10/HEM////// © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 260441 CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
PDDR
Perforated Ceiling Diffuser
Submittal Sheet PDDR
Item Tag:
RG-1
Non-Ducted Steel Perforated Flush Face Return Diffuser Plenum Return
Material:
Detail View:
Steel Construction
Finish: B12: White Powder Coat
Notes: Hinged, removable perforated faceplate with quick-release spring latches Frame 3: T-bar lay-in for 1" and 9/16" flat tee Maximum backpan height is 1 3/8” (35) Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory SUBMITTAL NO: 260645-A ENGINEER: CUSTOMER: DESCRIPTION: Perfor Diffuser,(Non)/Ducted Return-Flush Face,Stl PDDR//I/22/22/3/N-DCT/24/24////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
80
Egg Crate Grille
Submittal Sheet 80
Border:
Item Tag:
RG-2
Egg Crate Grille – 1/2" x 1/2" x 1/2" Core
Material:
F
Aluminum construction
1 1/4" (32) Flat Frame
Finish: B12 - White Powder Coat
Notes: 1/2" x 1/2" x 1/2" aluminum grid core Factory tolerance ± 1/32" (1)
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Egg Crate Grille, 1/2" X 1/2" X 1/2" 80//I/46.000/22.000//LI/F//////48/24///0///////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 259683-C CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
SMD
Louvered Directional Diffuser
Submittal Sheet SMD
Steel Modular Directional Diffuser
Core Style:
Border:
Item Tag:
SD-2
4A
36
4-Way, Style A for Square Inlet Neck
T-Bar Lay-In 1" (25)
Notes:
Material:
Cores sized in increments of 3" (76) in both directions Directional core removable at diffuser face Factory tolerance ± 1/32" (1)
Plan View:
Steel Construction
Finish: B12: White Powder Coat
PROJECT: Frauenshuh Livingston Ambulatory ENGINEER: DESCRIPTION: Steel Louvered Directional Diffuser SMD//I/18/18/36/4A/24/24////B12 © Copyright Price Industries 2016 Marketing Release version: 2.16.6.1, All In One version: 3.16.6
SUBMITTAL NO: 258515-C CUSTOMER:
SUBMITTAL DATE: 6/21/2016
All metric dimensions () are soft converted. Imperial dimensions are converted to metric and rounded to the nearest millimeter.
Page 1 of 1
