plumbing submittal
PLUMBING SUBMITTAL MATH AND SCIENCE GYM CONVERSION 3200 ADAMS BLVD, LOS ANGELES, CA
Pipeline Plumbing - 5772 Garden Grove Westminster CA 92683 - Lic.#866085 - Phone (714)866-2277
Table of Contents 1) American Standard FloWise .125 Ultra high efficiency urinal 2) American Standard Selectronic sensor urinal flush valve Model #6063.013.002 3) JR Smith floor drain model #2005Y 4) JR Smith Round Strainer Suffix A 5) Precision Trap Primer Model P1-500 6) American Standard Metering Faucet Model #1340.105 7) American Standard Lucerne wall hung single hole lavatory 8) American Standard Madera Flowise Elongated Flush meter Toilet 9) American Standard Manual FloWise Toilet Flush Valve #6047.121.002 10) American Standard Commercial toilet seat #5901.1 11) Chronomite Instant Flow water heater Model SR-20L 12) Bradley Mixing Valve Model 559-4000
Pipeline Plumbing - 5772 Garden Grove Westminster CA 92683 - Lic.#866085 - Phone (714)866-2277
WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM
SELECTRONIC® FLUSH VALVE
BARRIER FREE
WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM
❏ 6590.525 0.125 gpf Exposed Top Spud Urinal and Selectronic® Urinal Flush Valve
URINAL: • Vitreous china • Ultra High Efficiency. Operates in the range of 0.125 gpf to 1.0 gpf (0.5 Lpf to 3.8 Lpf) • Flushing rim • Elongated 14" rim from finished wall • Washout flush action • Extended sides for privacy • 3/4" inlet spud • Outlet connection threaded 2" inside (NPTF) • Strainer included • Meets ASME flush requirements at 0.125 to 1.0 gpf • Model 6590.001 top spud
SELECTRONIC® FLUSH VALVE: • Factory-Installed CR-P2 Lithium Battery • Pressure Compensation feature ensures accurate flush volume regardless of inlet water pressure • Self-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance • Selectronic® Proximity System with universal sensor provides hygienic, "hands free" operation • State-of-the-Art Electronics prevent ghost flushing • Dezincification Resistant semi-red brass alloy • Fully Mechanical Manual Override Button can flush the valve without power • Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset • Adjustable Sanitary Flush cleans the fixture & maintains the trap seal. • Stadium Feature: Valve automatically switches to water savings mode during periods of heavy usage • Chemical Resistant EPDM Seals for extended life • Adjustable Tailpiece for rough-in flexibility • Can be installed left or right handed • Model 6063.013
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
High-Efficiency Urinal Systems: • 87.5% water savings when compared to a 1.0 gpf urinal system Battery Life: • 4 years @ 4,000 flushes per month Operating Pressure: Overall Range: 20-125 psi** Recommended: 20 psi (flowing)-80 psi (static) ** Water pressure over 80 psi is not recommended for most plumbing fixtures. Flow Requirement: 10 gpm (37.9 L/min.)
Includes: • 2 Wall hangers • 3/4" I.P.S. angle stop with back-flow protection and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • 3/4" High back pressure vacuum breaker, spud coupling and flange
© 2014 AS America Inc.
N23
Nominal Fixture Dimensions: 360 x 480 x 664mm (14-1/8" x 18-7/8" x 26-1/8")
Rev. 11/14
WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM
SELECTRONIC® FLUSH VALVE
DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2") 108-133mm (4-1/4" to 5-1/4")
SUPPLY DN 20mm (3/4" I.P.S.)
MANUAL OVERRIDE BUTTON *CRITICAL LEVEL
FINISHED WALL
64mm (2-1/2")
15˚
293mm (11-1/2")
-C-L-
419mm (16-1/2")
K2 HANGERS 8mm X 25mm (5/16" X 1") SLOT 343mm (13-1/2") 480mm (18-7/8")
438mm (17-1/4")
235mm (9-1/4")
464mm (18-1/4")
664mm (26-1/8") REF.
360mm (14-1/8") 13mm (1/2") 83mm (3-1/4")
102mm (4")
C/L OF OUTLET
387mm (15-1/4") MAX 610mm (24") OPTIONAL
2" N.P.T. FEMALE OUTLET CONNECTION
FINISHED FLOOR
13mm (1/2")
*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 6" (152mm) above fixture. Consult Codes for details.
13mm (1/2") FINISHED WALL
VALVE LEFT or RIGHT HAND INSTALLATION
Fixture Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures Valve Listings: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant © 2014 AS America Inc.
GASKET
102mm (4") 2" N.P.T. INSIDE THREADS
DETAIL OF OUTLET CONNECTION
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. When installed so top of rim is 387mm (15-1/4") from finished floor. NOTES: PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
N24
Rev. 11/14
SELECTRONIC® SENSOR-OPERATED URINAL FLUSH VALVE, 0.125 GPF BATTERY POWERED
MODEL NUMBER:
❑ 6063.013.002 Exposed, sensor-operated flush valve for 3/4" top spud urinals, 0.125 gpf. Inlet includes 3/4" sweat solder kit and angle stop with back flow protection and vandal-resistant cap. utlet includes 3/4" high back pressure vacuum O breaker with spud coupling and flange.
❑ 6063.513.002 Retrofit Valve Only, 0.125 gpf OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 20 psi (flowing) - 80 psi (static)
GENERAL DESCRIPTION: Exposed, sensor-operated Selectronic ® Urinal Flush Valve for 3/4" top spud urinals. CR-P2 lithium battery powered.
** Water pressure over 80 psi is not recommended for most plumbing fixtures.
PRODUCT FEATURES: •F actory-Installed CR-P2 Lithium Battery
FLOW REQUIREMENT: 10 gpm (37.9 L/min.)
•P ressure Compensation feature ensures accurate flush volume regardless of inlet water pressure
BATTERY LIFE: 4 years
•S elf-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance •S electronic ® Proximity System with universal sensor provides hygienic, "hands free" operation
OPTIONAL ACCESSORY: • Cast wall flange with set screw (6065816.002) • 12-1/2" long vacuum breaker (M964446-0020A) - 4" longer than standard
•S tate-of-the-Art Electronics prevent ghost flushing • Dezincification Resistant semi-red brass alloy •F ully Mechanical Manual Override Button can flush the valve without power
57mm (2-1/4" MIN.)
108mm-134mm (4-1/4" TO 5-1/4")
•F ail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset 292mm (11-1/2")
•A djustable Sanitary Flush cleans the fixture & maintains the trap seal.
-C-L-
SUPPLY DN 20 (3/4" I.P.S.)
•S tadium Feature: Valve automatically switches to water savings mode during periods of heavy usage •C hemical Resistant EPDM Seals for extended life • High Back Pressure Vacuum Breaker
FINISHED WALL
• Adjustable Tailpiece • Range can be adjusted manually or with optional remote control • No external volume adjustment. • Can be installed left or right handed
FINISHED FLOOR
RECOMMENDED SPECIFICATION:
Electronic, sensor activated urinal flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Includes a factory-installed CR-P2 lithium battery and fully mechanical manual override that can flush the valve without power. Includes semi-red brass valve body and metal cover with chrome finish. Includes angle stop with back-flow protection & vandal-resistant cap. Sweat solder kit and high back pressure vacuum breaker also included. 0.125 gpf / 0.5 Lpf flush valve shall be American Standard Model # 6063.013.002. © 2014 AS America Inc.
L287
1/15
SELECTRONIC® SENSOR-OPERATED URINAL FLUSH VALVE, 0.125 GPF BATTERY POWERED
LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant
Roughing-in Dimensions 72mm (2-7/8")
FINISHED WALL 57mm (2-1/4" MIN.) 15˚
127mm (5")
DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2") MANUAL OVERRIDE BUTTON
SUPPLY DN 25mm (3/4" I.P.S.)
*CRITICAL LEVEL -C-L-
108mm-134mm (4-1/4" TO 5-1/4")
419mm (16-1/2")
293mm (11-1/2") FOR 3/4" TOP SPUD FIXTURES
*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6 " (152mm) above fixture. Consult Codes for details.
Right or Left Hand Installation MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES
© 2014 AS America Inc.
L288
1/15
SMITH ® JAY R.
LOCATION NITARY SA
®
P
®
MEMBER OF:
G
ASPE
CUSTOMER DRIVEN
EN e r
MEMBER OF MORRIS GROUP INTERNATIONAL POST OFFICE BOX 3237 MONTGOMERY, ALABAMA 36109-0237 (USA) TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
IN I ve nti N E E R Cu n on R ather Tha
re
R
SMITH MFG. CO.®
SINCE 1926
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S2005
A TD
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
TD
CHECKED BY:
FIGURE NUMBER
2005
DRAWN BY:
WITH ADJUSTABLE STRAINER HEADS
FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished floor level. 9 (230) DIA
Low Position
9 (230) DIA
High Position
B DIA or SQ
Low Position
X-MIN MAX
XX-MIN MAX
High Position
B DIA or SQ
X-MIN MAX
XX-MIN MAX
▼ 2 5/8"(67)
1 1/4 (32)
4(100)
1 1/4 (32)
Trap Primer Connection (When Specified)
4(100)
Trap Primer Connection (When Specified)
Seepage Openings
A
A
**6 3/4 (170)
Seepage Openings
**6 3/4 (170)
A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150) NO-HUB OUTLET
SPEEDI-SET OUTLET
Fig. 2005Y……(A) ROUND TOP Fig. 2005Y.……(B) SQUARE TOP
Fig. 2005L……(A) ROUND TOP Fig. 2005L……(B) SQUARE TOP
Outlet Size
PJ
APPROVED BY:
DATE:
5-17-85
SCALE:
NONE
SIZE
DRAWING NUMBER
FLOOR OR SHOWER DRAINS
Nickel Bronze Strainer Head ▲ 02(50) 05(125) DIA or SQ ▲ 03(75) 06(150) DIA or SQ ▲ 04(100) 08(205) DIA or SQ
Strainer Size B DIA or SQ 05 (125) 06 (150) 07 (180) 08 (205) •09 (230) •10 (255)
▼ This dimension to internal stop of speedi-set gasket. • Add 3/8"(10) to all min/max dimensions for round strainers. * Collar is reversible to obtain extreme high and low strainer positions. •• Not available for 5"(125) size strainer. ** MIN 6 3/4"(170) hole required for core drilled application.
*Collar In High Position X MIN MAX 1 1/4(32) 1 1/4(32) 1 1/4(32) 1 1/2(38) 1 1/2(38) 1 1/2(38)
*Collar Free Area In Low SQ IN Position (SQ CM) XX MIN MAX ROUND SQUARE
2 1/4(57) 3/4(19) 2 1/4(57) 3/4(19) 2 1/4(57) 7/8(22) 2 1/2(64) 1(25) 2 3/8(60) 1(25) 2 3/8(60) 1(25)
1 5/8(41) 1 5/8(41) 1 7/8(48) 1 7/8(48) 1 7/8(48) 1 7/8(48)
7(45) 9(58) 14(90) 17(110) 18(116) 23(48)
6.5(42) 12.5(81) 11(71) 14(90) 16(103) 16(103)
REGULARLY FURNISHED:
VARIATIONS:
OPTIONAL MATERIALS:
Duco Cast Iron Body with Flashing Collar and Adjustable Strainer Head as Indicated by Suffix Letter Selected.
Flapper Type Backwater Valve -V Hinged Grate -H L Speedi-Set Service Weight 2(50), 3(75) & 4"(100) only LXH Speedi-Set Extra Heavy 2(50), 3(75) & 4"(100) only Sediment Bucket -B Trap Primer Connection -P050 1/2" (13) & -P075 3/4" (19) Vandal Proof Screws -U Wide Flanged Strainer (Specify Fig. DX2005) T Threaded Outlet Heelproof Grate -HP -AHP (Round) or -BHP (Square) Quad Close Trap Seal (Specify Fig. 2692)
Bronze Body -BB Chrome Plated Strainer -CP Galvanized Cast Iron Body -G Nickel Bronze Strainer -NB Polished Bronze Strainer -PB Stainless Steel (Specify Fig. 9700-A)
NOTE: Dimensions shown in parentheses are in millimeters.
▲ Meets ASME Standard A112.6.3-2001 02(50), 03(75) or 04"(100) sizes only.
R Q P N REV.
6-10-15 11-18-11 11-20-09 12/18/08 DATE
••
Revised Variations Rev. Dwg., Var. Revised Variations Addition to Variations
TBW TBW RN JJ
DESCRIPTION
BY
CL CR BW BW CKD. BY
WEIGHT POUNDS
SEE PM0457 FOR OPTIONAL STRAINER HEADS. VOLUME CUBIC FEET
FIGURE NUMBER
2005
LOCATION
®
MEMBER OF:
SINCE 1926
FLAPPER TYPE BACKWATER VALVE
ROUND STRAINER B
ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA
DATE:
5-17-85
SCALE
NONE
A
SIZE
DRAWING NUMBER
PM0457 SH 1 of 2
OPTIONAL STRAINER HEADS
TD
APPROVED BY:
H
B DIA 05 (125) H 2 (51) MIN 1 1/4 (32) X MAX 2 1/4 (57)
VARIATIONS: MATERIALS: Chrome Plated -CP *Hinged Grate (Specify Suffix -AH) Polished Bronze -PB Sediment Bucket -B Nickel Bronze -NB Vandal Proof Screws -U
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
07 (180) 2 1/4 (57) 1 1/4 (32) 2 1/4 (57)
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
09 (230) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
SUFFIX -A
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB H
B DIA 05 (125) H 2 (51) MIN 1 1/4 (32) X MAX 2 1/4 (57)
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
07 (180) 2 1/4 (57) 1 1/4 (32) 2 1/4 (57)
B DIA 05 (125) H 2 (51) X MIN 1 1/4 (32) MAX 2 1/4 (57)
10 (255) 2 3/4 (70) 1 1/2 (38) 2 3/4 (70)
Flapper Type Backwater Valve (Specify Suffix -BV) 05 (125), 06 (150), 07 (180) or 08" (205) sizes only *Hinged Grate (Specify Suffix -BH) Sediment Bucket -B Vandal Proof Screws -U
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
SUFFIX -C
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
09 (230) 2 1/4 (57) 1 1/2 (38) 2 1/4 (57)
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
6 6 (150)
3 1/8(79) 3 1/8
10 (255) 2 1/4 (57) 1 1/2 (38) 2 3/8 (60)
REINFORCED TRACTOR STRAINER FUNCTION: Used in finished floors where medium weight wheeled loads are anticipated and loose set non-tilt tractor grate is desired.
VARIATIONS: Flapper Type Backwater Valve (Specify Suffix -CV) Sediment Bucket -B Vandal Proof Screws -U
MATERIALS: Cast Iron -CI Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
B
H
SUFFIX
10 (255) 2 3/4 (70) 1 7/8 (48) 2 3/4 (70)
-D -E
Specify Type, Size & Finish eg: C06NB
FUNCTION: Used in a non-traffic area when a funnel type strainer head is required and space does not allow use of the 3500 series funnel. The extended rim allows use as an anti-flood and anti-splash drip pan. VARIATIONS: Flapper Type Backwater Valve (Specify Suffix -F37V or F38V)
B
H
REV.
DATE
SUFFIX -F37-F38
Specify Type, Size & Finish eg: F06NB Revised Suffix-BS Revised Revised Tables Added Nickel Bronze DESCRIPTION
NOTE: Dimensions shown in parentheses are in millimeters.
X B H DIA MIN MAX 07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89) 09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)
ADJUSTABLE STRAINER HEAD
MIN MAX 1 1/4 (32) 2 1/8 (54)
10-4-01 8-24-99 6-11-99 11-4-97
VARIATIONS: Flapper Type Backwater Valve (Specify Suffix -DV or -EV) Sediment Bucket -B Vandal Proof Screws -U
Specify Type, Size & Finish eg: D09PB E09PB
SUFFIX -D-E
FUNCTION: Provides integral flange set 5/32" (4) below rim to receive floor covering. Flange may have option of tapped holes for securing pan and gasket. MATERIALS: VARIATIONS: Chrome Plated -CP Flapper Type Backwater 7 1/27 1/2 (190) Polished Bronze -PB Valve (Specify Suffix 6 6 (150) 5/32 -FV) 5/32 (4) Nickel Bronze -NB Holes in Flange -SH Sediment Bucket -B 2 2 (51) Vandal Proof Screws -U X
G E F E
VARIATIONS: Gasketed Water Tight Cover -GC Secured Cover -SC Secondary Strainer Grate-SG
Specify Type, Size & Finish eg: BSNB
SUFFIX -BS
TILE FLANGE
SUFFIX -F
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
VARIATIONS:
FUNCTION: Used in finished floors where light wheeled loads are anticipated.
B DIA 05 (125) H 2 (51) MIN 1 1/4 (32) MAX 2 1/4 (57)
07 (180) 2 1/4 (57) 1 1/4 (32) 2 1/4 (57)
STRAINER HEAD w/SQUARE HINGED COVER
REINFORCED ROUND STRAINER
H
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
VARIATIONS Grate (Specify Suffix -AH) Vandal Proof Screws -U
* Hinged
Specify Type, Size & Finish eg: AV05NB *Not available for 05" (125) size
SUFFIX -AV
Specify Type, Size & Finish eg: B05NB *Not available for 05" (125) size
B
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
H
SQUARE STRAINER B
FUNCTION: Provides backwater protection at point where protection is needed.
B
Specify Type, Size & Finish eg: A05NB *Not available for 05" (125) size
SUFFIX -B DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
TD
CHECKED BY:
PJ
DRAWN BY:
2010 SERIES OPTIONAL STRAINER HEADS FIGURE NUMBER
G
IN I ve nti N E E R Cu n on R ather Tha
P
CUSTOMER DRIVEN
NITARY SA
®
EN e r
ASPE
MEMBER OF MORRIS GROUP INTERNATIONAL POST OFFICE BOX 3237 MONTGOMERY, ALABAMA 36109-0237 (USA) TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
SMITH MFG. CO.
®
re
G
SMITH ® JAY R.
RN TBW CMD EMB
CL
BY
CKD. BY
BS BS
SUFFIX B DIA H MIN X MAX
-F37 07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89)
-F38 09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)
MATERIALS: Cast Iron -CI Chrome Plated -CP Galvanized Cast Iron -G Polished Bronze -PB Nickel Bronze -NB
Specify Type, Size & Finish eg: F37NB F38CP
FIGURE NUMBER
2010 SERIES OPTIONAL STRAINER HEADS 1 0f 2
TRAP PRIMER VALVES
P-1 & P-2 Series Trap Primer Valve
Precision Plumbing Products “Specify with Confidence - Install with Pride”® P1-500 AND P2-500 PRESSURE DROP ACTIVATED SUBMITTAL TRAP PRIMER www.pppinc.net
The P1-500 and P2-500 are adjustable to the static line pressure by use of the adjusting screw. System operating range is 20 psi minimum to 80 psi (138 to 552 kpa) maximum. The valve requires a 10 psi (70 kpa) pressure drop across the valve to activate and will deliver a metered amount of water to the floor drain. The trap Primer is to be connected to a cold water supply only.
Model P-2
Model P-1
1/2” NPT (M)
4 3/8” (111mm)
Constructed of 360 brass, EPDM E70 O-rings, Dow #7 Silicone, #60 stainless steel mesh screen, stainless steel adjustment screw. Model P1-500 will prime 1-4 floor drains using our patented DU-U Distribution unit. Model P2-500 will prime 1-2 floor drains using our patented DU-U Distribution unit.
1 1/8” (29mm)
PROJECT SUBMITTAL Project: Contractor:
FLOOR DRAIN TRAP PRIMER VALVE MODELS: P1-500 & P2-500
Engineer: Date Submitted: Prepared By:
PATENT NO. 5,263,508
METERING FAUCETS
PILLAR TAP FAUCET 1.0 GPM
MODEL NUMBER: 1340.105 Cast spout, 1.0 GPM pressure compensating vandal-resistant aerator 1340M.105 Same as above with mechanical mixing valve OPTIONAL 4" or 8" Deck plates 605P.400 4" brass deck plate with 1/4" fixation studs and quick spin nuts. (6-1/8" x 2-1/8" x 1/2") 605P.800 8" brass deck plate with 1/4" fixation studs and quick spin nuts. (10-1/8" x 2-3/8" x 1/2")
GENERAL DESCRIPTION:
Metering pillar tap faucet. Vandal resistant solid brass construction. Easy-push handle. Water conserving pressure compensating 1.0 GPM aerator. Factory set for a maximum of 0.17 gallon flow per activation. Replaceable cartridge. Adjustable flow cycle.
26mm (1-1/16")
106mm (4-3/16")
130mm (5-1/8")
PRODUCT FEATURES: • Pressure Compensating Aerator: Provides a constant water flow of 1.0 gpm throughout the pressure range.
78mm 51mm (3-1/8") (2")
MOUNTING SURFACE
• Vandal-Resistant Brass Construction and Aerator:
51mm (2")
52mm (2")
Durable - Excellent in high use applications.
• Automatic Shut-off: Stops water and energy waste. Ideal for
89mm (3-1/2")
public restrooms where uncontrolled water usage is costly.
560mm (22")
• Meets ADA Standard: Requires less than 5 lbs. of operating force to initiate flow per ANSI A117.1.
3/8" COMPRESSION
• Single Supply: For cold or tempered water. • Adjustable Flow Cycle • Replaceable Valve Cartridge: Facilitates simple replacement.
• Optional Mixing Valves: (sold separately) • Mechanical (Model # 021943-0070A) • Thermostatic (Model # 605XTMV1070)
• Flexible Supply Hose: With 3/8" Compression Connection • Optional 4" or 8" Deck Plate • Meets CALGreen • Lead Free: Faucet contains ≤ 0.25% total lead content by weighted average.
SUGGESTED SPECIFICATION
Metering faucet shall feature a single handle vandal-resistant brass construction with a replaceable valve cartridge and an adjustable flow cycle. Shall also feature a water-conserving pressure compensating 1.0 gpm/3.8L/min vandal-resistant aerator. Factory set to maintain flow below the maximum 0.17 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.105.002. © 2013 AS America Inc.
L31
Revised 3/14
LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA
BARRIER FREE
LUCERNE™ WALL-HUNG LAVATORY • Wall-hung sink • Vitreous china • Front overflow • D-shaped bowl • Self-draining deck area with contoured back and side splash shields • Faucet ledge • Compliant with Texas accessibility standard (TAS) for children age group 13 and up Faucet holes on 203mm (8") centers (Illus.): ❏ 0356.028 For exposed bracket support Shown with 4801.862 Amarilis Heritage faucet with Triune Cross handles (not included) ❏ 0356.015 For wall hanger (included) or concealed arms support ❏ 0356.915 For wall hanger (included) or concealed arms support • Less overflow
0356.028
Faucet holes on 102mm (4") centers:
❏ 0355.027 For exposed bracket support ❏ 0355.012 For wall hanger (included) or
concealed arms support
concealed arms support • Less overflow
❏ 0355.912 For wall hanger (included) or
Single center faucet hole (Illus.):
❏ 0356.041 For exposed bracket support
❏
❏
❏
❏
Shown with 1340.000 metering faucet (not included) 0356.421 For wall hanger (included) or concealed arms support 0356.921 For wall hanger (included) or concealed arms support • Less overflow 0356.439 For wall hanger (included) or concealed arms support • Single faucet hole on right 0356.066 For exposed bracket support • Single faucet hole on right
Nominal Dimensions: 521 x 464mm (20-1/2" x 18-1/4") Bowl sizes: 381mm (15") wide 254mm (10") front to back 165mm (6-1/2") deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2 / CSA B45.1 for Vitreous China Fixtures
© 2014 AS America Inc.
0356.041 SEE FOLLOWING PAGES FOR ROUGHING-IN DIMENSIONS To Be Specified: ❏ Color: ❏ White ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: ❏ Nipple: ❏ Bracket Support (by others): ❏ Concealed Arms Support (by others):
* See faucet section for additional models available MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor.
M31
Revised 3/14
LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA
BARRIER FREE
0356.041
SINGLE CENTER HOLE FOR EXPOSED BRACKET SUPPORT 0356.421 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS 0356.921 LESS OVERFLOW
44mm (1-3/4") DIA. STD. OUTLET
0356.439
SINGLE CENTER HOLE ON RIGHT FOR WALL HANGER OR CONCEALED ARMS 0356.066 SINGLE CENTER HOLE ON RIGHT FOR EXPOSED BRACKET SUPPORT
25mm (1-3/8") DIA. PUNCHING 86mm (3-3/8")
102mm (4")
86mm (3-3/8")
114mm (4-1/2")
203mm (8")
FINISHED WALL 152mm (6")
203mm (8")
FINISHED WALL
13mm x 51mm BRACKET (1/2" x 2") SLOTS
464mm (18-1/4")
44mm (1-3/4") DIA. STD. OUTLET
464mm (18-1/4")
152mm (6")
102mm (4")
8mm (5/16") (6) 25mm (1") DIA. ACCESS HOLES FOR CONC. ARMS
25mm (1") DIA. HOLES 8mm (5/16")
57mm (2-1/4")
13mm (1/2")
425mm (16-3/4")
521mm (20-1/2")
13mm (1/2")
521mm (20-1/2")
425mm (16-3/4")
425mm (16-3/4")
267mm (10-1/2")
267mm (10-1/2")
114mm (4-1/2") 102mm 44mm (4") (1-3/4")
35mm (1-3/8") DIA. PUNCHING
349mm (13-3/4")
114mm (4-1/2")
54mm (2-1/8") DIA. HOLES FOR CONCEALED ARMS
25mm (1")
102mm 44mm (4") (1-3/4")
79mm (3-1/8")
25mm (1")
79mm (3-1/8")
206mm (8-1/8") 38mm (1-1/2")
54mm (2-1/8") DIA. HOLES FOR CONCEALED ARMS
10mm (3/8") DIA. ANCHOR SCREW HOLES
206mm (8-1/8") 10mm (3/8") 38mm DIA. ANCHOR (1-1/2") SCREW HOLES
787mm (31") 864mm (34")
S-9 HANGER
FINISHED FLOOR
27mm X 14mm (1-1/16" x 5/16") SLOTS
18-1/4" (464mm)
27" MIN. (686mm)
18-1/4" (464mm)
FINISHED WALL
27" MIN. (686mm)
9" MIN. (229mm)
FINISHED WALL
8" MIN. (203mm)
34" (864mm)
6" MAX. (152mm)
BARRIER FREE CLEARANCE
FINISHED FLOOR
27mm X 14mm (1-1/16" x 5/16") SLOTS
8" MIN. (203mm)
34" (864mm)
787mm (31") 864mm (34")
S-9 HANGER
6" MAX. (152mm)
BARRIER FREE CLEARANCE
9" MIN. (229mm)
11" (279mm)
11" (279mm)
NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED. *PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2014 AS America Inc.
LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.
M33
Revised 3/14
MADERA™ FloWise® 15" HEIGHT ELONGATED FLUSHOMETER TOILET VITREOUS CHINA LESS EVERCLEAN ®
MADERA™ FloWise ® 15" HEIGHT ELONGATED LESS EVERCLEAN ® • Floor mount flushometer valve toilet • Vitreous china • High Efficiency, Low Consumption. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf) • Meets definition of HET (High Efficiency Toilet) when used with a high efficiency flush valve (1.28 gpf or 1.6 / 1.1 gpf dual flush) • Fully glazed 2-1/8" trapway • Elongated bowl • 10" or 12" roughing-in • 15" rim height • Condensation channel • Powerful direct-fed siphon jet action • 10" x 12" water surface area • 1-1/2" inlet spud • 2 bolt caps • 100% factory flush tested
❏ 2234.001 Elongated bowl only, top spud ❏ 2623.001 Elongated bowl only, top spud with
slotted rim for bedpan holding (White only)
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
❏ 2624.001 Elongated bowl only, back spud
System MaP* Score: •1 ,000 grams of miso @ 1.1 gpf, 1.28 gpf or 1.6 gpf when used with an American Standard flush valve *M aximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.
Component Parts: ❏ 047007-0070A Inlet Spud (furnished with bowl) ❏ 481310-100 Bolt caps with retainers (furnished with bowl) Nominal Dimensions: 718 x 356 x 381mm (28-1/4" x 14" x 15") Fixture only, less seat and flush valve Recommended working pressure–between 25 psi at valve when flushing and 80 psi static Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures
© 2014 AS America Inc.
To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Seat: ❏ American Standard #5901.100 Heavy duty open front less cover ❏ American Standard #5905.100 Extra heavy duty open front less cover ❏ Flushometer Valve: ❏ 1.6 gpf: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.161.002 (Top Spud) ❏ Sensor-Operated: American Standard Selectronic ® AC Power #6067.261.002 (Back Spud) ❏ Manual: American Standard #6047.161.002 (Top Spud) ❏ 1.28 gpf: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.121.002 (Top Spud) ❏ Sensor-Operated: American Standard Selectronic ® AC Power #6067.221.002 (Back Spud) ❏ Manual: American Standard #6047.121.002 (Top Spud) ❏ 1.6 / 1.1 gpf Dual Flush: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.761.002 (Top Spud)
M103
Rev. 2/14
MADERA™ FloWise® 15" HEIGHT ELONGATED FLUSHOMETER TOILET VITREOUS CHINA LESS EVERCLEAN ®
2234.001/2623.001
1" N.P.T. OR 1" C.W.T. SUPPLY TO FLUSH VALVE
FINISHED WALL
121mm (4-3/4 " )
718mm (28-1/4")
673mm (26-1/2 " )
356mm (14 " )
102mm (4")
470mm (18-1/2 " )
25mm (1")
C/L OF SEAT POST HOLES 140mm (5-1/2 " ) CENTERS
1-1/2 " SPUD
381mm (15 " )
FINISHED FLOOR
338mm (13-5/16 " ) 13mm (1/2 " ) 254mm (10 " )
150mm (5-7/8")
238mm (9-3/8 " )
C/L OF OUTLET
2624.001 FINISHED WALL
718mm (28-1/4") 76mm (3")
356mm (14 " )
470mm (18-1/2 " ) C/L OF SEAT POST HOLES 140mm (5-1/2 " ) CENTERS
400mm (15-3/4 " ) 381mm (15 " )
13mm (1/2 " ) 254mm (10 " )
150mm (5-7/8")
338mm (13-5/16 " )
FINISHED FLOOR
238mm (9-3/8 " )
C/L OF OUTLET
NOTES: PRODUCT 2234 SHOWN, 2623 SAME EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING. TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR 12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED. REFER TO VALVE MANUFACTURER AND LOCAL CODES. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2014 AS America Inc.
M104
Rev. 2/14
MANUAL FloWise®
TOILET FLUSH VALVE
1.28 GPF MODEL NUMBER:
❑ 6047.121.002 Flush Valve for 11-1/2" Supply C\L to top of bowl, 1.28 gpf
❑ 6047.122.002 Flush Valve for 27" Supply C\L to top of bowl, 1.28 gpf
❑ 6047.525.002 Retrofit for existing flush valves, 1.28 gpf. Replaces industry standard manual & electronic flush valves. Does not include vacuum breaker assembly, angle stop & sweat solder kit. OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 25 psi (flowing)-80 psi (static) GENERAL DESCRIPTION: Manual Piston-Type Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls.
** Water pressure over 80 psi is not recommended for most plumbing fixtures. FLOW REQUIREMENT: 25gpm (94.6 L/min.)
INCLUDES: • 1" I.P.S. angle stop with back-flow prevention and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • High back pressure vacuum breaker with down tube • Spud coupling & flange for 1-1/2” top spud PRODUCT FEATURES: • Self-cleaning brass piston with integral wiper spring prevents clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Piston valve remains closed and does not need to be reset after loss of water pressure • Non-hold open handle • Positive seal ensures leak-free performance • No external volume adjustment • Durable chrome-plated cast brass construction is ideal for commercial applications • Chloramine-resistant EPDM seals • Adjustable tailpiece for rough-in flexibility • Can be installed left or right handed • ADA complaint
ACCESSORIES: • Cast wall flanges (3/4", 1" & 1-1/2") • Solid ring pipe supports (2-1/2" & 6" C-E) • Split ring pipe supports (2-1/2" & 6" C-E)
5:1*$"-8"5&3$-04&5*/45"--"5*0/ "'8"--50*-&54)08/ '*/*4)&%8"-NN
NN
NN
$-
4611-: %/NN *14
NN NN
$3*5*$"-&7&4&&306()*/ 0/#"$,
'*/*4)&% '-003
RECOMMENDED SPECIFICATION:
Manual toilet flush valve shall feature self-cleaning brass piston valve with integral wiper spring in bypass orifice to prevent clogging. Valve remains closed and does not need to be reset after loss of water pressure. Includes cast brass valve body and cover with chrome finish and vandal resistant stop cap. Includes sweat solder kit with wall flange and cover tube. Angle stop with back-flow protection and vacuum breaker included. 1.28 gpf / 4.8 Lpf Flush valve shall be American Standard Model # 6065.12_.002. © 2010 AS America Inc.
L117
MANUAL FloWise®
TOILET FLUSH VALVE
1.28 GPF LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant '*/*4)&%8"--
3PVHIJOHJO%JNFOTJPOT
NNNN
4611-: %/NN *14
NNNN UP
306()*/ %*.&/4*0/ NN
$-
$3*5*$"-&7&-
306()*/ %*.&/4*0/ NN
'03501 416%'*9563&4
/PUF5IF$SJUJDBM-JOF $- PO7BDVVN#SFBLFS NVTUUZQJDBMMZCFBNJOJNVNPG NN BCPWF GJYUVSF$POTVMU$PEFTGPSEFUBJMT
-FGUPS3JHIU)BOE*OTUBMMBUJPO MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES © 2010 AS America Inc.
L118
NN
NN
COMMERCIAL TOILET SEATS COMMERCIAL TOILET SEATS ❑ 5901.100 Elongated Heavy Duty bowl open front seat less cover ❑ 5901.100SS Same as 5901.100 with self-sustaining hinge ❑ 5901.110T Same as 5901.100 with EverClean® Surface ❑ 5901.110T5 Master Pack of 5 - 5901.110T seats individually boxed and labeled for easy sell through • Open front toilet seat less cover • Injection molded solid polypropylene • Fits elongated bowl • Features large molded-in bumpers • External check hinge with 304 Series stainless steel hinge posts stops seat 11° beyond vertical • EverClean® silver-based surface permanently inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface. EverClean® surface does not protect against disease causing bacteria.
Model # A B C D E Ring Thickness Ring Thickness with Bumper
5901
E
5901 18-9/16" (471mm) 14-3/8" (365mm)
A
7-7/8" (200mm)
C
3-1/2" (89mm) 5-1/2" (140mm) 7/8" (22mm)
D
1" (25mm) B
To Be Specified: White ❏ Color: ❏
© 2016 AS America Inc.
M165
spec_5901 (4/16)
CHRONOMITE INSTANT-FLOW WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
Wattage
Voltage
Breaker Size
SR-15L SR-15L SR-20L SR-20L SR-20L SR-20L SR-30L
1800 4150 2400 4160 4800 5540 3600
110/120 277 110/120 208 220/240 277 110/120
15A 15A 20A 20A 20A 20A 30A
Specifications:
Instant-Flow • Dimensions: • Weight: • Materials: • Color: • Pipe Fittings: • Pressure Requirements: • Maximum Operating Temp: • Flow Switch Activation: • Flow Switch De-Activation: • Listings:
6¼” x 9 5/8” x 2 ¾” 5 lbs. Rugged cast aluminum alloy casing, Celcon waterways, nichrome parts White (unless stainless steel housing) Female ¼” NPT standard pipe thread 25 PSI Minimum, 150 PSI Maximum (300 PSI tested) No pressure relief valve needed unless required by local codes. 140°F .4 GPM .35 GPM UL, HUD, IAPMO
THE MANUFACTURER OF THIS WATER HEATER WILL NOT BE LIABLE FOR ANY DAMAGES DUE TO THE FAILURE TO FOLLOW THESE INSTALLATION AND OPERATION INSTRUCTIONS. CAUTION:
BEFORE BEGINNING THE INSTALLATION: A)
B)
Turn off the circuit breaker to avoid dangerous electrical shocks. Turn off the water supply.
1. Remove electrical access cover. Attach conduit to the conduit access hole. Then feed wires. Do not attach wiring. 2. Mount unit horizontally against the wall so the silver label reads correctly (See Fig. 1). Mount with four screws through the flanges located on each corner using molly anchors or fasteners. CAUTION: Heating elements may burn out if unit is not mounted horizontally. 3. Connect plumbing. Use ¼” tapered national pipe thread at cold water inlet and hot water outlet (See Fig. 1). Use compression fittings supplied for ease of installation. Do not apply heat to these fittings. 4. Run water through the unit to expel all air bubbles. Check for leaks at all fitting joints. 5. Connect wiring. Attach ground wire to center terminal and hot wires to outer terminals (See Fig. 3) 6. Replace electrical access cover. Turn on the circuit breaker. The unit is now ready for use. 7. Local plumbing and electrical codes must be followed in the installation of this water heater and it’s accessories. 8. Failure to comply with code requirements voids the warranty. 9. Failure to install faucet flow control as shown on Fig. 2 will cause unsatisfactory operation of the heater.
S59-4000, S59-4000A, S59-4000BY Navigator® Thermostatic Mixing Valves
• Lead-free design † • Glass-filled polysulfone valve body • Thermoplastic polymer cartridge • Reliable wax-filled thermostat • Adjustable set point within temperature range • Easy installation and serviceability • Universal Mounting Capability • Integral check valves and strainers • Factory assembled and tested • Optional mounting bracket
Lead Free †
S59-4000A (Shown with Optional Mounting Bracket)
Valve Specifications
S59-4000
Maximum Operating Pressure 125 PSI (860 kPA) Maximum Inlet Temperature 180° F (82° C) Temperature Range Std.
95° F (35° C) to 125° F (52° C)
Temperature Differential – Hot to Mix 10° F (18°C) S59-4000BY (Shown with Optional Mounting Bracket)
Flow Capacities – GPM (L/Min) Min. Flow 0.35 (1.5)
Pressure Drop – PSI (Bar) 5 (.5)
10 (1.0)
15 (1.5)
20 (2.0)
30 (2.5)
45 (3.0)
60 (4.0)
2.0 (7.5)
2.5 (9.0)
3.0 (11.0)
3.5 (13.0)
4.5 (17.0)
5.5 (19.0)
6.5 (24.5)
Code Compliance and Certifications
ASSE 1070 & cUPC certified. Complies with California Lead Plumbing Law.
Models (Must select one) Model Description Navigator® Thermostatic Mixing Valve with 1/2" male NPT connection ¨ S59-4000 ¨ S59-4000A
Navigator Thermostatic Mixing Valve with 3/8" Compression Fittings
¨ S59-4000BY
Navigator Thermostatic Mixing Valve with 3/8" Compression Cold Side Bypass
¨ S45-2456
Optional Mounting Bracket
Certified to NSF/ANSI 372
† Wetted surface contains less than .25% lead Standard product selections contained within this document are third party CERTIFIED to NSF/ANSI 372 meeting the Lead-Free content requirement. Any product configured with custom options will be COMPLIANT with NSF/ANSI 372 meeting the Lead-Free content requirement.
Engineer's Approval___________________________ Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer. Page 1 of 2 8/19/2014 This information is subject to change without notice. Bradley_TMV_PointOfUse_S59-4000_A_BY
© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
S59-4000, S59-4000A, S59-4000BY Navigator® Thermostatic Mixing Valves
Dimensions (mm)
S59-4000A
S59-4000
1-7/8" (48)
1-7/8" (48)
5" (127) 4-1/8" (105) 1-3/4" (44)
1-3/8" (35)
1-1/2" (38)
2-5/8" (67)
2-1/4" (57)
2-1/4" (57)
1" (25)
1-1/2" (38)
2-1/4" (57)
1-1/2" (38)
S59-4000BY
1" (25) 1-1/2" (38)
1-7/8" (48)
5" (127)
2-5/8" (67)
2-1/4" (57)
2-1/4" (57)
Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer. Page 2 of 2 8/19/2014 This information is subject to change without notice. Bradley_TMV_PointOfUse_S59-4000_A_BY
3-1/8" (79)
1" (25) 1-1/2" (38)
© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
Pipeline Plumbing - 5772 Garden Grove Westminster CA 92683 - Lic.#866085 - Phone (714)866-2277
Table of Contents 1) American Standard FloWise .125 Ultra high efficiency urinal 2) American Standard Selectronic sensor urinal flush valve Model #6063.013.002 3) JR Smith floor drain model #2005Y 4) JR Smith Round Strainer Suffix A 5) Precision Trap Primer Model P1-500 6) American Standard Metering Faucet Model #1340.105 7) American Standard Lucerne wall hung single hole lavatory 8) American Standard Madera Flowise Elongated Flush meter Toilet 9) American Standard Manual FloWise Toilet Flush Valve #6047.121.002 10) American Standard Commercial toilet seat #5901.1 11) Chronomite Instant Flow water heater Model SR-20L 12) Bradley Mixing Valve Model 559-4000
Pipeline Plumbing - 5772 Garden Grove Westminster CA 92683 - Lic.#866085 - Phone (714)866-2277
WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM
SELECTRONIC® FLUSH VALVE
BARRIER FREE
WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM
❏ 6590.525 0.125 gpf Exposed Top Spud Urinal and Selectronic® Urinal Flush Valve
URINAL: • Vitreous china • Ultra High Efficiency. Operates in the range of 0.125 gpf to 1.0 gpf (0.5 Lpf to 3.8 Lpf) • Flushing rim • Elongated 14" rim from finished wall • Washout flush action • Extended sides for privacy • 3/4" inlet spud • Outlet connection threaded 2" inside (NPTF) • Strainer included • Meets ASME flush requirements at 0.125 to 1.0 gpf • Model 6590.001 top spud
SELECTRONIC® FLUSH VALVE: • Factory-Installed CR-P2 Lithium Battery • Pressure Compensation feature ensures accurate flush volume regardless of inlet water pressure • Self-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance • Selectronic® Proximity System with universal sensor provides hygienic, "hands free" operation • State-of-the-Art Electronics prevent ghost flushing • Dezincification Resistant semi-red brass alloy • Fully Mechanical Manual Override Button can flush the valve without power • Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset • Adjustable Sanitary Flush cleans the fixture & maintains the trap seal. • Stadium Feature: Valve automatically switches to water savings mode during periods of heavy usage • Chemical Resistant EPDM Seals for extended life • Adjustable Tailpiece for rough-in flexibility • Can be installed left or right handed • Model 6063.013
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
High-Efficiency Urinal Systems: • 87.5% water savings when compared to a 1.0 gpf urinal system Battery Life: • 4 years @ 4,000 flushes per month Operating Pressure: Overall Range: 20-125 psi** Recommended: 20 psi (flowing)-80 psi (static) ** Water pressure over 80 psi is not recommended for most plumbing fixtures. Flow Requirement: 10 gpm (37.9 L/min.)
Includes: • 2 Wall hangers • 3/4" I.P.S. angle stop with back-flow protection and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • 3/4" High back pressure vacuum breaker, spud coupling and flange
© 2014 AS America Inc.
N23
Nominal Fixture Dimensions: 360 x 480 x 664mm (14-1/8" x 18-7/8" x 26-1/8")
Rev. 11/14
WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM
SELECTRONIC® FLUSH VALVE
DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2") 108-133mm (4-1/4" to 5-1/4")
SUPPLY DN 20mm (3/4" I.P.S.)
MANUAL OVERRIDE BUTTON *CRITICAL LEVEL
FINISHED WALL
64mm (2-1/2")
15˚
293mm (11-1/2")
-C-L-
419mm (16-1/2")
K2 HANGERS 8mm X 25mm (5/16" X 1") SLOT 343mm (13-1/2") 480mm (18-7/8")
438mm (17-1/4")
235mm (9-1/4")
464mm (18-1/4")
664mm (26-1/8") REF.
360mm (14-1/8") 13mm (1/2") 83mm (3-1/4")
102mm (4")
C/L OF OUTLET
387mm (15-1/4") MAX 610mm (24") OPTIONAL
2" N.P.T. FEMALE OUTLET CONNECTION
FINISHED FLOOR
13mm (1/2")
*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 6" (152mm) above fixture. Consult Codes for details.
13mm (1/2") FINISHED WALL
VALVE LEFT or RIGHT HAND INSTALLATION
Fixture Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures Valve Listings: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant © 2014 AS America Inc.
GASKET
102mm (4") 2" N.P.T. INSIDE THREADS
DETAIL OF OUTLET CONNECTION
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. When installed so top of rim is 387mm (15-1/4") from finished floor. NOTES: PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
N24
Rev. 11/14
SELECTRONIC® SENSOR-OPERATED URINAL FLUSH VALVE, 0.125 GPF BATTERY POWERED
MODEL NUMBER:
❑ 6063.013.002 Exposed, sensor-operated flush valve for 3/4" top spud urinals, 0.125 gpf. Inlet includes 3/4" sweat solder kit and angle stop with back flow protection and vandal-resistant cap. utlet includes 3/4" high back pressure vacuum O breaker with spud coupling and flange.
❑ 6063.513.002 Retrofit Valve Only, 0.125 gpf OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 20 psi (flowing) - 80 psi (static)
GENERAL DESCRIPTION: Exposed, sensor-operated Selectronic ® Urinal Flush Valve for 3/4" top spud urinals. CR-P2 lithium battery powered.
** Water pressure over 80 psi is not recommended for most plumbing fixtures.
PRODUCT FEATURES: •F actory-Installed CR-P2 Lithium Battery
FLOW REQUIREMENT: 10 gpm (37.9 L/min.)
•P ressure Compensation feature ensures accurate flush volume regardless of inlet water pressure
BATTERY LIFE: 4 years
•S elf-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance •S electronic ® Proximity System with universal sensor provides hygienic, "hands free" operation
OPTIONAL ACCESSORY: • Cast wall flange with set screw (6065816.002) • 12-1/2" long vacuum breaker (M964446-0020A) - 4" longer than standard
•S tate-of-the-Art Electronics prevent ghost flushing • Dezincification Resistant semi-red brass alloy •F ully Mechanical Manual Override Button can flush the valve without power
57mm (2-1/4" MIN.)
108mm-134mm (4-1/4" TO 5-1/4")
•F ail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset 292mm (11-1/2")
•A djustable Sanitary Flush cleans the fixture & maintains the trap seal.
-C-L-
SUPPLY DN 20 (3/4" I.P.S.)
•S tadium Feature: Valve automatically switches to water savings mode during periods of heavy usage •C hemical Resistant EPDM Seals for extended life • High Back Pressure Vacuum Breaker
FINISHED WALL
• Adjustable Tailpiece • Range can be adjusted manually or with optional remote control • No external volume adjustment. • Can be installed left or right handed
FINISHED FLOOR
RECOMMENDED SPECIFICATION:
Electronic, sensor activated urinal flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Includes a factory-installed CR-P2 lithium battery and fully mechanical manual override that can flush the valve without power. Includes semi-red brass valve body and metal cover with chrome finish. Includes angle stop with back-flow protection & vandal-resistant cap. Sweat solder kit and high back pressure vacuum breaker also included. 0.125 gpf / 0.5 Lpf flush valve shall be American Standard Model # 6063.013.002. © 2014 AS America Inc.
L287
1/15
SELECTRONIC® SENSOR-OPERATED URINAL FLUSH VALVE, 0.125 GPF BATTERY POWERED
LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant
Roughing-in Dimensions 72mm (2-7/8")
FINISHED WALL 57mm (2-1/4" MIN.) 15˚
127mm (5")
DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2") MANUAL OVERRIDE BUTTON
SUPPLY DN 25mm (3/4" I.P.S.)
*CRITICAL LEVEL -C-L-
108mm-134mm (4-1/4" TO 5-1/4")
419mm (16-1/2")
293mm (11-1/2") FOR 3/4" TOP SPUD FIXTURES
*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6 " (152mm) above fixture. Consult Codes for details.
Right or Left Hand Installation MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES
© 2014 AS America Inc.
L288
1/15
SMITH ® JAY R.
LOCATION NITARY SA
®
P
®
MEMBER OF:
G
ASPE
CUSTOMER DRIVEN
EN e r
MEMBER OF MORRIS GROUP INTERNATIONAL POST OFFICE BOX 3237 MONTGOMERY, ALABAMA 36109-0237 (USA) TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
IN I ve nti N E E R Cu n on R ather Tha
re
R
SMITH MFG. CO.®
SINCE 1926
WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA
S2005
A TD
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
TD
CHECKED BY:
FIGURE NUMBER
2005
DRAWN BY:
WITH ADJUSTABLE STRAINER HEADS
FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished floor level. 9 (230) DIA
Low Position
9 (230) DIA
High Position
B DIA or SQ
Low Position
X-MIN MAX
XX-MIN MAX
High Position
B DIA or SQ
X-MIN MAX
XX-MIN MAX
▼ 2 5/8"(67)
1 1/4 (32)
4(100)
1 1/4 (32)
Trap Primer Connection (When Specified)
4(100)
Trap Primer Connection (When Specified)
Seepage Openings
A
A
**6 3/4 (170)
Seepage Openings
**6 3/4 (170)
A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150) NO-HUB OUTLET
SPEEDI-SET OUTLET
Fig. 2005Y……(A) ROUND TOP Fig. 2005Y.……(B) SQUARE TOP
Fig. 2005L……(A) ROUND TOP Fig. 2005L……(B) SQUARE TOP
Outlet Size
PJ
APPROVED BY:
DATE:
5-17-85
SCALE:
NONE
SIZE
DRAWING NUMBER
FLOOR OR SHOWER DRAINS
Nickel Bronze Strainer Head ▲ 02(50) 05(125) DIA or SQ ▲ 03(75) 06(150) DIA or SQ ▲ 04(100) 08(205) DIA or SQ
Strainer Size B DIA or SQ 05 (125) 06 (150) 07 (180) 08 (205) •09 (230) •10 (255)
▼ This dimension to internal stop of speedi-set gasket. • Add 3/8"(10) to all min/max dimensions for round strainers. * Collar is reversible to obtain extreme high and low strainer positions. •• Not available for 5"(125) size strainer. ** MIN 6 3/4"(170) hole required for core drilled application.
*Collar In High Position X MIN MAX 1 1/4(32) 1 1/4(32) 1 1/4(32) 1 1/2(38) 1 1/2(38) 1 1/2(38)
*Collar Free Area In Low SQ IN Position (SQ CM) XX MIN MAX ROUND SQUARE
2 1/4(57) 3/4(19) 2 1/4(57) 3/4(19) 2 1/4(57) 7/8(22) 2 1/2(64) 1(25) 2 3/8(60) 1(25) 2 3/8(60) 1(25)
1 5/8(41) 1 5/8(41) 1 7/8(48) 1 7/8(48) 1 7/8(48) 1 7/8(48)
7(45) 9(58) 14(90) 17(110) 18(116) 23(48)
6.5(42) 12.5(81) 11(71) 14(90) 16(103) 16(103)
REGULARLY FURNISHED:
VARIATIONS:
OPTIONAL MATERIALS:
Duco Cast Iron Body with Flashing Collar and Adjustable Strainer Head as Indicated by Suffix Letter Selected.
Flapper Type Backwater Valve -V Hinged Grate -H L Speedi-Set Service Weight 2(50), 3(75) & 4"(100) only LXH Speedi-Set Extra Heavy 2(50), 3(75) & 4"(100) only Sediment Bucket -B Trap Primer Connection -P050 1/2" (13) & -P075 3/4" (19) Vandal Proof Screws -U Wide Flanged Strainer (Specify Fig. DX2005) T Threaded Outlet Heelproof Grate -HP -AHP (Round) or -BHP (Square) Quad Close Trap Seal (Specify Fig. 2692)
Bronze Body -BB Chrome Plated Strainer -CP Galvanized Cast Iron Body -G Nickel Bronze Strainer -NB Polished Bronze Strainer -PB Stainless Steel (Specify Fig. 9700-A)
NOTE: Dimensions shown in parentheses are in millimeters.
▲ Meets ASME Standard A112.6.3-2001 02(50), 03(75) or 04"(100) sizes only.
R Q P N REV.
6-10-15 11-18-11 11-20-09 12/18/08 DATE
••
Revised Variations Rev. Dwg., Var. Revised Variations Addition to Variations
TBW TBW RN JJ
DESCRIPTION
BY
CL CR BW BW CKD. BY
WEIGHT POUNDS
SEE PM0457 FOR OPTIONAL STRAINER HEADS. VOLUME CUBIC FEET
FIGURE NUMBER
2005
LOCATION
®
MEMBER OF:
SINCE 1926
FLAPPER TYPE BACKWATER VALVE
ROUND STRAINER B
ASSUME NO RESPONSIBILIT OR USE OF SUPERSEDED OR VOID DATA
DATE:
5-17-85
SCALE
NONE
A
SIZE
DRAWING NUMBER
PM0457 SH 1 of 2
OPTIONAL STRAINER HEADS
TD
APPROVED BY:
H
B DIA 05 (125) H 2 (51) MIN 1 1/4 (32) X MAX 2 1/4 (57)
VARIATIONS: MATERIALS: Chrome Plated -CP *Hinged Grate (Specify Suffix -AH) Polished Bronze -PB Sediment Bucket -B Nickel Bronze -NB Vandal Proof Screws -U
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
07 (180) 2 1/4 (57) 1 1/4 (32) 2 1/4 (57)
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
09 (230) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
SUFFIX -A
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB H
B DIA 05 (125) H 2 (51) MIN 1 1/4 (32) X MAX 2 1/4 (57)
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
07 (180) 2 1/4 (57) 1 1/4 (32) 2 1/4 (57)
B DIA 05 (125) H 2 (51) X MIN 1 1/4 (32) MAX 2 1/4 (57)
10 (255) 2 3/4 (70) 1 1/2 (38) 2 3/4 (70)
Flapper Type Backwater Valve (Specify Suffix -BV) 05 (125), 06 (150), 07 (180) or 08" (205) sizes only *Hinged Grate (Specify Suffix -BH) Sediment Bucket -B Vandal Proof Screws -U
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
SUFFIX -C
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
09 (230) 2 1/4 (57) 1 1/2 (38) 2 1/4 (57)
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
6 6 (150)
3 1/8(79) 3 1/8
10 (255) 2 1/4 (57) 1 1/2 (38) 2 3/8 (60)
REINFORCED TRACTOR STRAINER FUNCTION: Used in finished floors where medium weight wheeled loads are anticipated and loose set non-tilt tractor grate is desired.
VARIATIONS: Flapper Type Backwater Valve (Specify Suffix -CV) Sediment Bucket -B Vandal Proof Screws -U
MATERIALS: Cast Iron -CI Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
B
H
SUFFIX
10 (255) 2 3/4 (70) 1 7/8 (48) 2 3/4 (70)
-D -E
Specify Type, Size & Finish eg: C06NB
FUNCTION: Used in a non-traffic area when a funnel type strainer head is required and space does not allow use of the 3500 series funnel. The extended rim allows use as an anti-flood and anti-splash drip pan. VARIATIONS: Flapper Type Backwater Valve (Specify Suffix -F37V or F38V)
B
H
REV.
DATE
SUFFIX -F37-F38
Specify Type, Size & Finish eg: F06NB Revised Suffix-BS Revised Revised Tables Added Nickel Bronze DESCRIPTION
NOTE: Dimensions shown in parentheses are in millimeters.
X B H DIA MIN MAX 07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89) 09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)
ADJUSTABLE STRAINER HEAD
MIN MAX 1 1/4 (32) 2 1/8 (54)
10-4-01 8-24-99 6-11-99 11-4-97
VARIATIONS: Flapper Type Backwater Valve (Specify Suffix -DV or -EV) Sediment Bucket -B Vandal Proof Screws -U
Specify Type, Size & Finish eg: D09PB E09PB
SUFFIX -D-E
FUNCTION: Provides integral flange set 5/32" (4) below rim to receive floor covering. Flange may have option of tapped holes for securing pan and gasket. MATERIALS: VARIATIONS: Chrome Plated -CP Flapper Type Backwater 7 1/27 1/2 (190) Polished Bronze -PB Valve (Specify Suffix 6 6 (150) 5/32 -FV) 5/32 (4) Nickel Bronze -NB Holes in Flange -SH Sediment Bucket -B 2 2 (51) Vandal Proof Screws -U X
G E F E
VARIATIONS: Gasketed Water Tight Cover -GC Secured Cover -SC Secondary Strainer Grate-SG
Specify Type, Size & Finish eg: BSNB
SUFFIX -BS
TILE FLANGE
SUFFIX -F
08 (205) 2 1/2 (64) 1 1/2 (38) 2 1/2 (64)
VARIATIONS:
FUNCTION: Used in finished floors where light wheeled loads are anticipated.
B DIA 05 (125) H 2 (51) MIN 1 1/4 (32) MAX 2 1/4 (57)
07 (180) 2 1/4 (57) 1 1/4 (32) 2 1/4 (57)
STRAINER HEAD w/SQUARE HINGED COVER
REINFORCED ROUND STRAINER
H
06 (150) 2 (51) 1 1/4 (32) 2 1/4 (57)
VARIATIONS Grate (Specify Suffix -AH) Vandal Proof Screws -U
* Hinged
Specify Type, Size & Finish eg: AV05NB *Not available for 05" (125) size
SUFFIX -AV
Specify Type, Size & Finish eg: B05NB *Not available for 05" (125) size
B
MATERIALS: Chrome Plated -CP Polished Bronze -PB Nickel Bronze -NB
H
SQUARE STRAINER B
FUNCTION: Provides backwater protection at point where protection is needed.
B
Specify Type, Size & Finish eg: A05NB *Not available for 05" (125) size
SUFFIX -B DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE
TD
CHECKED BY:
PJ
DRAWN BY:
2010 SERIES OPTIONAL STRAINER HEADS FIGURE NUMBER
G
IN I ve nti N E E R Cu n on R ather Tha
P
CUSTOMER DRIVEN
NITARY SA
®
EN e r
ASPE
MEMBER OF MORRIS GROUP INTERNATIONAL POST OFFICE BOX 3237 MONTGOMERY, ALABAMA 36109-0237 (USA) TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com
G
SMITH MFG. CO.
®
re
G
SMITH ® JAY R.
RN TBW CMD EMB
CL
BY
CKD. BY
BS BS
SUFFIX B DIA H MIN X MAX
-F37 07 (180) 3 1/4 (83) 2 5/8 (67) 3 1/2 (89)
-F38 09 (230) 3 1/2 (89) 2 3/4 (70) 3 1/2 (89)
MATERIALS: Cast Iron -CI Chrome Plated -CP Galvanized Cast Iron -G Polished Bronze -PB Nickel Bronze -NB
Specify Type, Size & Finish eg: F37NB F38CP
FIGURE NUMBER
2010 SERIES OPTIONAL STRAINER HEADS 1 0f 2
TRAP PRIMER VALVES
P-1 & P-2 Series Trap Primer Valve
Precision Plumbing Products “Specify with Confidence - Install with Pride”® P1-500 AND P2-500 PRESSURE DROP ACTIVATED SUBMITTAL TRAP PRIMER www.pppinc.net
The P1-500 and P2-500 are adjustable to the static line pressure by use of the adjusting screw. System operating range is 20 psi minimum to 80 psi (138 to 552 kpa) maximum. The valve requires a 10 psi (70 kpa) pressure drop across the valve to activate and will deliver a metered amount of water to the floor drain. The trap Primer is to be connected to a cold water supply only.
Model P-2
Model P-1
1/2” NPT (M)
4 3/8” (111mm)
Constructed of 360 brass, EPDM E70 O-rings, Dow #7 Silicone, #60 stainless steel mesh screen, stainless steel adjustment screw. Model P1-500 will prime 1-4 floor drains using our patented DU-U Distribution unit. Model P2-500 will prime 1-2 floor drains using our patented DU-U Distribution unit.
1 1/8” (29mm)
PROJECT SUBMITTAL Project: Contractor:
FLOOR DRAIN TRAP PRIMER VALVE MODELS: P1-500 & P2-500
Engineer: Date Submitted: Prepared By:
PATENT NO. 5,263,508
METERING FAUCETS
PILLAR TAP FAUCET 1.0 GPM
MODEL NUMBER: 1340.105 Cast spout, 1.0 GPM pressure compensating vandal-resistant aerator 1340M.105 Same as above with mechanical mixing valve OPTIONAL 4" or 8" Deck plates 605P.400 4" brass deck plate with 1/4" fixation studs and quick spin nuts. (6-1/8" x 2-1/8" x 1/2") 605P.800 8" brass deck plate with 1/4" fixation studs and quick spin nuts. (10-1/8" x 2-3/8" x 1/2")
GENERAL DESCRIPTION:
Metering pillar tap faucet. Vandal resistant solid brass construction. Easy-push handle. Water conserving pressure compensating 1.0 GPM aerator. Factory set for a maximum of 0.17 gallon flow per activation. Replaceable cartridge. Adjustable flow cycle.
26mm (1-1/16")
106mm (4-3/16")
130mm (5-1/8")
PRODUCT FEATURES: • Pressure Compensating Aerator: Provides a constant water flow of 1.0 gpm throughout the pressure range.
78mm 51mm (3-1/8") (2")
MOUNTING SURFACE
• Vandal-Resistant Brass Construction and Aerator:
51mm (2")
52mm (2")
Durable - Excellent in high use applications.
• Automatic Shut-off: Stops water and energy waste. Ideal for
89mm (3-1/2")
public restrooms where uncontrolled water usage is costly.
560mm (22")
• Meets ADA Standard: Requires less than 5 lbs. of operating force to initiate flow per ANSI A117.1.
3/8" COMPRESSION
• Single Supply: For cold or tempered water. • Adjustable Flow Cycle • Replaceable Valve Cartridge: Facilitates simple replacement.
• Optional Mixing Valves: (sold separately) • Mechanical (Model # 021943-0070A) • Thermostatic (Model # 605XTMV1070)
• Flexible Supply Hose: With 3/8" Compression Connection • Optional 4" or 8" Deck Plate • Meets CALGreen • Lead Free: Faucet contains ≤ 0.25% total lead content by weighted average.
SUGGESTED SPECIFICATION
Metering faucet shall feature a single handle vandal-resistant brass construction with a replaceable valve cartridge and an adjustable flow cycle. Shall also feature a water-conserving pressure compensating 1.0 gpm/3.8L/min vandal-resistant aerator. Factory set to maintain flow below the maximum 0.17 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.105.002. © 2013 AS America Inc.
L31
Revised 3/14
LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA
BARRIER FREE
LUCERNE™ WALL-HUNG LAVATORY • Wall-hung sink • Vitreous china • Front overflow • D-shaped bowl • Self-draining deck area with contoured back and side splash shields • Faucet ledge • Compliant with Texas accessibility standard (TAS) for children age group 13 and up Faucet holes on 203mm (8") centers (Illus.): ❏ 0356.028 For exposed bracket support Shown with 4801.862 Amarilis Heritage faucet with Triune Cross handles (not included) ❏ 0356.015 For wall hanger (included) or concealed arms support ❏ 0356.915 For wall hanger (included) or concealed arms support • Less overflow
0356.028
Faucet holes on 102mm (4") centers:
❏ 0355.027 For exposed bracket support ❏ 0355.012 For wall hanger (included) or
concealed arms support
concealed arms support • Less overflow
❏ 0355.912 For wall hanger (included) or
Single center faucet hole (Illus.):
❏ 0356.041 For exposed bracket support
❏
❏
❏
❏
Shown with 1340.000 metering faucet (not included) 0356.421 For wall hanger (included) or concealed arms support 0356.921 For wall hanger (included) or concealed arms support • Less overflow 0356.439 For wall hanger (included) or concealed arms support • Single faucet hole on right 0356.066 For exposed bracket support • Single faucet hole on right
Nominal Dimensions: 521 x 464mm (20-1/2" x 18-1/4") Bowl sizes: 381mm (15") wide 254mm (10") front to back 165mm (6-1/2") deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2 / CSA B45.1 for Vitreous China Fixtures
© 2014 AS America Inc.
0356.041 SEE FOLLOWING PAGES FOR ROUGHING-IN DIMENSIONS To Be Specified: ❏ Color: ❏ White ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: ❏ Nipple: ❏ Bracket Support (by others): ❏ Concealed Arms Support (by others):
* See faucet section for additional models available MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor.
M31
Revised 3/14
LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA
BARRIER FREE
0356.041
SINGLE CENTER HOLE FOR EXPOSED BRACKET SUPPORT 0356.421 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS 0356.921 LESS OVERFLOW
44mm (1-3/4") DIA. STD. OUTLET
0356.439
SINGLE CENTER HOLE ON RIGHT FOR WALL HANGER OR CONCEALED ARMS 0356.066 SINGLE CENTER HOLE ON RIGHT FOR EXPOSED BRACKET SUPPORT
25mm (1-3/8") DIA. PUNCHING 86mm (3-3/8")
102mm (4")
86mm (3-3/8")
114mm (4-1/2")
203mm (8")
FINISHED WALL 152mm (6")
203mm (8")
FINISHED WALL
13mm x 51mm BRACKET (1/2" x 2") SLOTS
464mm (18-1/4")
44mm (1-3/4") DIA. STD. OUTLET
464mm (18-1/4")
152mm (6")
102mm (4")
8mm (5/16") (6) 25mm (1") DIA. ACCESS HOLES FOR CONC. ARMS
25mm (1") DIA. HOLES 8mm (5/16")
57mm (2-1/4")
13mm (1/2")
425mm (16-3/4")
521mm (20-1/2")
13mm (1/2")
521mm (20-1/2")
425mm (16-3/4")
425mm (16-3/4")
267mm (10-1/2")
267mm (10-1/2")
114mm (4-1/2") 102mm 44mm (4") (1-3/4")
35mm (1-3/8") DIA. PUNCHING
349mm (13-3/4")
114mm (4-1/2")
54mm (2-1/8") DIA. HOLES FOR CONCEALED ARMS
25mm (1")
102mm 44mm (4") (1-3/4")
79mm (3-1/8")
25mm (1")
79mm (3-1/8")
206mm (8-1/8") 38mm (1-1/2")
54mm (2-1/8") DIA. HOLES FOR CONCEALED ARMS
10mm (3/8") DIA. ANCHOR SCREW HOLES
206mm (8-1/8") 10mm (3/8") 38mm DIA. ANCHOR (1-1/2") SCREW HOLES
787mm (31") 864mm (34")
S-9 HANGER
FINISHED FLOOR
27mm X 14mm (1-1/16" x 5/16") SLOTS
18-1/4" (464mm)
27" MIN. (686mm)
18-1/4" (464mm)
FINISHED WALL
27" MIN. (686mm)
9" MIN. (229mm)
FINISHED WALL
8" MIN. (203mm)
34" (864mm)
6" MAX. (152mm)
BARRIER FREE CLEARANCE
FINISHED FLOOR
27mm X 14mm (1-1/16" x 5/16") SLOTS
8" MIN. (203mm)
34" (864mm)
787mm (31") 864mm (34")
S-9 HANGER
6" MAX. (152mm)
BARRIER FREE CLEARANCE
9" MIN. (229mm)
11" (279mm)
11" (279mm)
NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED. *PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2014 AS America Inc.
LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.
M33
Revised 3/14
MADERA™ FloWise® 15" HEIGHT ELONGATED FLUSHOMETER TOILET VITREOUS CHINA LESS EVERCLEAN ®
MADERA™ FloWise ® 15" HEIGHT ELONGATED LESS EVERCLEAN ® • Floor mount flushometer valve toilet • Vitreous china • High Efficiency, Low Consumption. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf) • Meets definition of HET (High Efficiency Toilet) when used with a high efficiency flush valve (1.28 gpf or 1.6 / 1.1 gpf dual flush) • Fully glazed 2-1/8" trapway • Elongated bowl • 10" or 12" roughing-in • 15" rim height • Condensation channel • Powerful direct-fed siphon jet action • 10" x 12" water surface area • 1-1/2" inlet spud • 2 bolt caps • 100% factory flush tested
❏ 2234.001 Elongated bowl only, top spud ❏ 2623.001 Elongated bowl only, top spud with
slotted rim for bedpan holding (White only)
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
❏ 2624.001 Elongated bowl only, back spud
System MaP* Score: •1 ,000 grams of miso @ 1.1 gpf, 1.28 gpf or 1.6 gpf when used with an American Standard flush valve *M aximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.
Component Parts: ❏ 047007-0070A Inlet Spud (furnished with bowl) ❏ 481310-100 Bolt caps with retainers (furnished with bowl) Nominal Dimensions: 718 x 356 x 381mm (28-1/4" x 14" x 15") Fixture only, less seat and flush valve Recommended working pressure–between 25 psi at valve when flushing and 80 psi static Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures
© 2014 AS America Inc.
To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Seat: ❏ American Standard #5901.100 Heavy duty open front less cover ❏ American Standard #5905.100 Extra heavy duty open front less cover ❏ Flushometer Valve: ❏ 1.6 gpf: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.161.002 (Top Spud) ❏ Sensor-Operated: American Standard Selectronic ® AC Power #6067.261.002 (Back Spud) ❏ Manual: American Standard #6047.161.002 (Top Spud) ❏ 1.28 gpf: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.121.002 (Top Spud) ❏ Sensor-Operated: American Standard Selectronic ® AC Power #6067.221.002 (Back Spud) ❏ Manual: American Standard #6047.121.002 (Top Spud) ❏ 1.6 / 1.1 gpf Dual Flush: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.761.002 (Top Spud)
M103
Rev. 2/14
MADERA™ FloWise® 15" HEIGHT ELONGATED FLUSHOMETER TOILET VITREOUS CHINA LESS EVERCLEAN ®
2234.001/2623.001
1" N.P.T. OR 1" C.W.T. SUPPLY TO FLUSH VALVE
FINISHED WALL
121mm (4-3/4 " )
718mm (28-1/4")
673mm (26-1/2 " )
356mm (14 " )
102mm (4")
470mm (18-1/2 " )
25mm (1")
C/L OF SEAT POST HOLES 140mm (5-1/2 " ) CENTERS
1-1/2 " SPUD
381mm (15 " )
FINISHED FLOOR
338mm (13-5/16 " ) 13mm (1/2 " ) 254mm (10 " )
150mm (5-7/8")
238mm (9-3/8 " )
C/L OF OUTLET
2624.001 FINISHED WALL
718mm (28-1/4") 76mm (3")
356mm (14 " )
470mm (18-1/2 " ) C/L OF SEAT POST HOLES 140mm (5-1/2 " ) CENTERS
400mm (15-3/4 " ) 381mm (15 " )
13mm (1/2 " ) 254mm (10 " )
150mm (5-7/8")
338mm (13-5/16 " )
FINISHED FLOOR
238mm (9-3/8 " )
C/L OF OUTLET
NOTES: PRODUCT 2234 SHOWN, 2623 SAME EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING. TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR 12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED. REFER TO VALVE MANUFACTURER AND LOCAL CODES. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2014 AS America Inc.
M104
Rev. 2/14
MANUAL FloWise®
TOILET FLUSH VALVE
1.28 GPF MODEL NUMBER:
❑ 6047.121.002 Flush Valve for 11-1/2" Supply C\L to top of bowl, 1.28 gpf
❑ 6047.122.002 Flush Valve for 27" Supply C\L to top of bowl, 1.28 gpf
❑ 6047.525.002 Retrofit for existing flush valves, 1.28 gpf. Replaces industry standard manual & electronic flush valves. Does not include vacuum breaker assembly, angle stop & sweat solder kit. OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 25 psi (flowing)-80 psi (static) GENERAL DESCRIPTION: Manual Piston-Type Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls.
** Water pressure over 80 psi is not recommended for most plumbing fixtures. FLOW REQUIREMENT: 25gpm (94.6 L/min.)
INCLUDES: • 1" I.P.S. angle stop with back-flow prevention and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • High back pressure vacuum breaker with down tube • Spud coupling & flange for 1-1/2” top spud PRODUCT FEATURES: • Self-cleaning brass piston with integral wiper spring prevents clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Piston valve remains closed and does not need to be reset after loss of water pressure • Non-hold open handle • Positive seal ensures leak-free performance • No external volume adjustment • Durable chrome-plated cast brass construction is ideal for commercial applications • Chloramine-resistant EPDM seals • Adjustable tailpiece for rough-in flexibility • Can be installed left or right handed • ADA complaint
ACCESSORIES: • Cast wall flanges (3/4", 1" & 1-1/2") • Solid ring pipe supports (2-1/2" & 6" C-E) • Split ring pipe supports (2-1/2" & 6" C-E)
5:1*$"-8"5&3$-04&5*/45"--"5*0/ "'8"--50*-&54)08/ '*/*4)&%8"-NN
NN
NN
$-
4611-: %/NN *14
NN NN
$3*5*$"-&7&4&&306()*/ 0/#"$,
'*/*4)&% '-003
RECOMMENDED SPECIFICATION:
Manual toilet flush valve shall feature self-cleaning brass piston valve with integral wiper spring in bypass orifice to prevent clogging. Valve remains closed and does not need to be reset after loss of water pressure. Includes cast brass valve body and cover with chrome finish and vandal resistant stop cap. Includes sweat solder kit with wall flange and cover tube. Angle stop with back-flow protection and vacuum breaker included. 1.28 gpf / 4.8 Lpf Flush valve shall be American Standard Model # 6065.12_.002. © 2010 AS America Inc.
L117
MANUAL FloWise®
TOILET FLUSH VALVE
1.28 GPF LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant '*/*4)&%8"--
3PVHIJOHJO%JNFOTJPOT
NNNN
4611-: %/NN *14
NNNN UP
306()*/ %*.&/4*0/ NN
$-
$3*5*$"-&7&-
306()*/ %*.&/4*0/ NN
'03501 416%'*9563&4
/PUF5IF$SJUJDBM-JOF $- PO7BDVVN#SFBLFS NVTUUZQJDBMMZCFBNJOJNVNPG NN BCPWF GJYUVSF$POTVMU$PEFTGPSEFUBJMT
-FGUPS3JHIU)BOE*OTUBMMBUJPO MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES © 2010 AS America Inc.
L118
NN
NN
COMMERCIAL TOILET SEATS COMMERCIAL TOILET SEATS ❑ 5901.100 Elongated Heavy Duty bowl open front seat less cover ❑ 5901.100SS Same as 5901.100 with self-sustaining hinge ❑ 5901.110T Same as 5901.100 with EverClean® Surface ❑ 5901.110T5 Master Pack of 5 - 5901.110T seats individually boxed and labeled for easy sell through • Open front toilet seat less cover • Injection molded solid polypropylene • Fits elongated bowl • Features large molded-in bumpers • External check hinge with 304 Series stainless steel hinge posts stops seat 11° beyond vertical • EverClean® silver-based surface permanently inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface. EverClean® surface does not protect against disease causing bacteria.
Model # A B C D E Ring Thickness Ring Thickness with Bumper
5901
E
5901 18-9/16" (471mm) 14-3/8" (365mm)
A
7-7/8" (200mm)
C
3-1/2" (89mm) 5-1/2" (140mm) 7/8" (22mm)
D
1" (25mm) B
To Be Specified: White ❏ Color: ❏
© 2016 AS America Inc.
M165
spec_5901 (4/16)
CHRONOMITE INSTANT-FLOW WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
Wattage
Voltage
Breaker Size
SR-15L SR-15L SR-20L SR-20L SR-20L SR-20L SR-30L
1800 4150 2400 4160 4800 5540 3600
110/120 277 110/120 208 220/240 277 110/120
15A 15A 20A 20A 20A 20A 30A
Specifications:
Instant-Flow • Dimensions: • Weight: • Materials: • Color: • Pipe Fittings: • Pressure Requirements: • Maximum Operating Temp: • Flow Switch Activation: • Flow Switch De-Activation: • Listings:
6¼” x 9 5/8” x 2 ¾” 5 lbs. Rugged cast aluminum alloy casing, Celcon waterways, nichrome parts White (unless stainless steel housing) Female ¼” NPT standard pipe thread 25 PSI Minimum, 150 PSI Maximum (300 PSI tested) No pressure relief valve needed unless required by local codes. 140°F .4 GPM .35 GPM UL, HUD, IAPMO
THE MANUFACTURER OF THIS WATER HEATER WILL NOT BE LIABLE FOR ANY DAMAGES DUE TO THE FAILURE TO FOLLOW THESE INSTALLATION AND OPERATION INSTRUCTIONS. CAUTION:
BEFORE BEGINNING THE INSTALLATION: A)
B)
Turn off the circuit breaker to avoid dangerous electrical shocks. Turn off the water supply.
1. Remove electrical access cover. Attach conduit to the conduit access hole. Then feed wires. Do not attach wiring. 2. Mount unit horizontally against the wall so the silver label reads correctly (See Fig. 1). Mount with four screws through the flanges located on each corner using molly anchors or fasteners. CAUTION: Heating elements may burn out if unit is not mounted horizontally. 3. Connect plumbing. Use ¼” tapered national pipe thread at cold water inlet and hot water outlet (See Fig. 1). Use compression fittings supplied for ease of installation. Do not apply heat to these fittings. 4. Run water through the unit to expel all air bubbles. Check for leaks at all fitting joints. 5. Connect wiring. Attach ground wire to center terminal and hot wires to outer terminals (See Fig. 3) 6. Replace electrical access cover. Turn on the circuit breaker. The unit is now ready for use. 7. Local plumbing and electrical codes must be followed in the installation of this water heater and it’s accessories. 8. Failure to comply with code requirements voids the warranty. 9. Failure to install faucet flow control as shown on Fig. 2 will cause unsatisfactory operation of the heater.
S59-4000, S59-4000A, S59-4000BY Navigator® Thermostatic Mixing Valves
• Lead-free design † • Glass-filled polysulfone valve body • Thermoplastic polymer cartridge • Reliable wax-filled thermostat • Adjustable set point within temperature range • Easy installation and serviceability • Universal Mounting Capability • Integral check valves and strainers • Factory assembled and tested • Optional mounting bracket
Lead Free †
S59-4000A (Shown with Optional Mounting Bracket)
Valve Specifications
S59-4000
Maximum Operating Pressure 125 PSI (860 kPA) Maximum Inlet Temperature 180° F (82° C) Temperature Range Std.
95° F (35° C) to 125° F (52° C)
Temperature Differential – Hot to Mix 10° F (18°C) S59-4000BY (Shown with Optional Mounting Bracket)
Flow Capacities – GPM (L/Min) Min. Flow 0.35 (1.5)
Pressure Drop – PSI (Bar) 5 (.5)
10 (1.0)
15 (1.5)
20 (2.0)
30 (2.5)
45 (3.0)
60 (4.0)
2.0 (7.5)
2.5 (9.0)
3.0 (11.0)
3.5 (13.0)
4.5 (17.0)
5.5 (19.0)
6.5 (24.5)
Code Compliance and Certifications
ASSE 1070 & cUPC certified. Complies with California Lead Plumbing Law.
Models (Must select one) Model Description Navigator® Thermostatic Mixing Valve with 1/2" male NPT connection ¨ S59-4000 ¨ S59-4000A
Navigator Thermostatic Mixing Valve with 3/8" Compression Fittings
¨ S59-4000BY
Navigator Thermostatic Mixing Valve with 3/8" Compression Cold Side Bypass
¨ S45-2456
Optional Mounting Bracket
Certified to NSF/ANSI 372
† Wetted surface contains less than .25% lead Standard product selections contained within this document are third party CERTIFIED to NSF/ANSI 372 meeting the Lead-Free content requirement. Any product configured with custom options will be COMPLIANT with NSF/ANSI 372 meeting the Lead-Free content requirement.
Engineer's Approval___________________________ Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer. Page 1 of 2 8/19/2014 This information is subject to change without notice. Bradley_TMV_PointOfUse_S59-4000_A_BY
© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
S59-4000, S59-4000A, S59-4000BY Navigator® Thermostatic Mixing Valves
Dimensions (mm)
S59-4000A
S59-4000
1-7/8" (48)
1-7/8" (48)
5" (127) 4-1/8" (105) 1-3/4" (44)
1-3/8" (35)
1-1/2" (38)
2-5/8" (67)
2-1/4" (57)
2-1/4" (57)
1" (25)
1-1/2" (38)
2-1/4" (57)
1-1/2" (38)
S59-4000BY
1" (25) 1-1/2" (38)
1-7/8" (48)
5" (127)
2-5/8" (67)
2-1/4" (57)
2-1/4" (57)
Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer. Page 2 of 2 8/19/2014 This information is subject to change without notice. Bradley_TMV_PointOfUse_S59-4000_A_BY
3-1/8" (79)
1" (25) 1-1/2" (38)
© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
