Plumbing Submittal
No Exception Taken
NO EXCEPTIONS
Does Not Comply
EXCEPTIONS AS NOTED REJECTED FOR RESUBMITTAL 3
REVIEWED
Please note the VE Options are included in this submittal.
OTHER ______________________________________________ NOTE:
JOB MEASUREMENTS, QUANTITIES AND CONFORMANCE WITH CONTRACT DOCUMENTS ARE THE SPECIFIC RESPONSIBILITY OF THE SUBCONTRACTOR/SUPPLIER
BY:
Thomas Ondrias
BURTON CONSTRUCTION CO. JOB # SUBMITTAL #
10161 - DWTW Plumbing - Drains
DATE: 08/12/2016
No Action Taken
Revise & Resubmit
✔ Exceptions noted, Resubmittal not required
This review is only for general conformance with the design concept and the information given in the Construction Documents. Corrections or comments made on the shop drawings during this review do not relieve the contractor from compliance with the requirements of the plans and specifications. Review of a specific item shall not include review of an assembly of which the item is a component. The Contractor is responsible for dimensions to be confirmed and correlated at the jobsite: information that pertains solely to the fabrication process or to the means, methods, techniques, sequences and procedures of construction: coordination of the Work with that of all other trades and performing Work in a safe and satisfactory manner.
Plumbing Submittal BY KRIS MARLITZ
SUBMITTAL#
DRAINS
DATE
08/22/2016
SPEC
-
NOTE: PROVIDE 2" OVERFLOW AT RD-1 PROVIDE 2" WATER DAM AT OD-1 SEE NOTES ON SPEC FOR TD-1
VE DEL WEBB WOODLANDS/DRAINS Submitted by
THE COMFLOW COMPANY LLC 8/10/2016
MOORE SUPPLY CO 15090 SOMMERMEYER STE 100 HOUSTON, TX 77041 Phone: 832 456-2900 Fax: 832 456-2930 www.mooresupply.com
Spec# 1 2 3
Table of Contents ............ ** CR-1 ** 3498730 WATTS RD-400 DECK RECEPTOR DRAIN ............ ** RD-1 **
4
3668154 WATTS RD-700-3 EPOXY COATED CI DUAL OUTLET ROOF DRAIN/OVERFLOW COMBINATION W/FLASHING CLAMP, INTEGRAL GRAVEL STOP, 4"(102) HIGH INTERNAL OVERFLOW STANDPIPE, SECURED DI DOME, & 3" NO-HUB OUTLETS
5
3672399 WATTS RD-700-6 EPOXY COATED CI DUAL OUTLET ROOF DRAIN/OVERFLOW COMBINATION W/FLASHING CLAMP, INTEGRAL GRAVEL STOP, 4"(102) HIGH INTERNAL OVERFLOW STANDPIPE, SECURED DI DOME, & 6" NO-HUB OUTLETS
6
............ ** OD-1 **
7
3485875 RD-300-R 3-4" WATTS ROOF DRAIN
8
3485878 RD-300-R 6" WATTS ROOF DRAIN
9
3722592 WATTS RD-300-R OVERFLOW DRAIN
10
............ ** ACCESSORIES WHERE REQUIRED **
11
3498730 WATTSDRAIN -F ADJUSTABLE EXTENSION
12
3498730 WATTSDRAIN -D UNDER DECK CLAMPS
13
3498730 WATTSDRAIN -B SUMP RECEIVER
14
............ ** SK-2 **
15
3498730 WATTSDRAIN SI-742-SS-X-US
16
............ ** TD-1 **
17
3498730 TRENCH DLD-SP
18
3498730 TRENCH FG-SS
Spec Seq#: 1
** CR-1 **
Spec Seq#: 2
RD-400
Deck Receptor Drain
Tag:
SPECIFICATION: Watts Drainage RD-400 epoxy coated cast iron deck receptor drain with 2"(51) high receptor flange, internal dome strainer and no hub (standard) outlet. Components
12-11/16"(322)
2“ (51)
B2
B2-R
B2-DM-L
FC-1
Pipe Sizing (Select One) Suffix
4“ (102)
Description
2 3 4
2"(51) Pipe Size 3"(76) Pipe Size 4"(102) Pipe Size
6
6"(152) Pipe Size
6-1/4“ (159)
Outlet Type (Select One) Suffix NH P T X
Description No Hub (MJ) Push On Threaded Outlet Inside Caulk
Options (Select One or More) Suffix
PIPE SIZE
-13 -B -D -F -US
Description All Galvanized Sump Receiver Deck Clamp Deck Flange/Adj. Extension
Buy American Compliant
Optional Body Material Suffix -60 -61
Free Area Sq. In. 42
Description PVC Body w/Socket Outlet ABS Body w/Socket Outlet
Deck opening 10" (254) with sump receiver 13-1/4" (337)
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 t Fax: (828) 248-3929 t Watts.com Canada: Tel: (905) 332-4090 t Fax: (905) 332-7068 t Watts.ca Latin America: Tel: (52) 81-1001-8600 t Fax: (52) 81-8000-7091 t Watts.com
ES-WD-RD-400-USA 1525
A Watts Water Technologies Company
© 2015 Watts
Spec Seq#: 3
** RD-1 **
Spec Seq#: 4-5
Dual Outlet Roof Drain/Overflow
RD-700 Tag:
SPECIFICATION: Watts Drainage RD-700 epoxy coated cast iron dual outlet roof drain/overflow combination with flashing clamp, integral gravel stop, 4"(102) high internal overflow standpipe, secured ductile iron dome, and no hub outlets.
20"(508)
Suffix
Secured Ductile Iron Dome
4"(102)
Flashing Clamp
Primary Outlet
Description
3
3"(76) Pipe Size
4
4"(102) Pipe Size
5
5"(127) Pipe Size
6
6"(152) Pipe Size
Options Suffix -D
5 15/32" (139)
5 1/16" (129)
4"(102) High Overflow
10 17/32"(267)
Pipe Sizing (Select One)
21"(533)
Description Underdeck Clamp
-F
Deck Flange/Adj. Extension
-GSS
Stainless Steel Ballast Guard
-K80
Aluminum Dome
-K83
SS Mesh Covered
-L
Vandal Proof Dome
-W2
2" High Overflow
Aluminum Dome
2"(51) 8"(203) PIPE SIZE 14 25/32" (376) 18 1/2"(470) (DECK OPENING)
PIPE SIZE
Deck Opening: 18-1/2"(470) x 10-1/2"(267) with Sump Receiver: 22"(559) x 14"(356)
20"(508)
Free Area Sq. In. 13 1/16"(332)
157
12 1/16"(307)
6 27/32"(173) 10 1/2"(267) (DECK OPENING) 12 1/16"(307)
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 • Fax: (828) 248-3929 • Watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com
ES-WD-RD-700-USA 1609
A Watts Water Technologies Company
© 2016 Watts
Spec Seq#: 6
** OD-1 **
Spec Seq#:7-13
RD-300 Tag:
High Volume Roof Drain
OD-1
SPECIFICATION: Watts Drainage RD-300 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, self-locking polyethylene dome (standard), and no hub (standard) outlet. Components
16 5/8”(422) 15 1/4”(387)
B15-FLG
B15
B2-DM
FC-6
Pipe Sizing (Select One) Suffix
6 5/8” (168)
Description
2 3 4
2”(51) Pipe Size (NH Only) 3”(76) Pipe Size 4”(102) Pipe Size
5 6 8 10
5”(127) Pipe Size (NH Only) 6”(152) Pipe Size 8”(203) Pipe Size 10”(254) Pipe Size (NH Only)
Outlet Type (Select One) Suffix
Description
NH P
No Hub (MJ) Push On
X
Inside Caulk
Options (Select One or More)
5 1/2” (140)
Suffix
PIPE SIZE Free Area Sq. In.
137
Deck opening 14-1/2" (368) with sump receiver 18" (457)
Description
-13 -B -D -F -GSS -K -K13
Galvanized Body and Clamp Sump Receiver Underdeck Clamp Deck Flange/Adj. Extension Stainless Steel Ballast Guard Ductile Iron Dome Galvanized Dome
-K40 -K80 -K81 -K83 -L
Ductile Iron Low Dome (4" high) Aluminum Dome Rough Bronze Dome
-85
IRMA Perf. SS Extension
SS Mesh Covered Dome Vandal Proof Dome -R 2" External W Water Dam -SSH SSH St Stainless i l St Steell H Hardware d -US Buy American Compliant -W Adjustable Internal Water Dam
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 • Fax: (828) 248-3929 • Watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com
ES-WD-RD-300-USA 1630
© 2016 Watts
Spec Seq#:
** ACCESSORIES WHERE REQUIRED **
Spec Seq#: 14
** SK-2 **
Spec Seq#: 15
SI-742-X
Hair, Plaster & Sediment Interceptor w/Flush Cover
Tag:
SPECIFICATION: Watts Drainage SI-742-X epoxy coated steel sediment interceptor for floor mount or recessed installation, with removable stainless steel sediment basket, gasketed cover, and 2"(51mm) IPS threaded connections. NOTE: 10"(254) clearance required above cover to remove sediment basket.
Options (Select One or More) 7"(178)
Suffix -SS -US
Description Stainless Steel
Buy American Compliant
2"(51) PIPE
8"(203) OUTLET 11"(279)
8"(203) 2"(51)PIPE
INLET
ES-WD-SI-742-X USA 1336
SI-742-X
Spec Seq#: 16
** TD-1 **
Spec Seq#: 17-18
Pre-Sloped Polypropylene Trench Drain System w/Ductile Iron Frame
Dead Level™ D Tag:
SPECIFICATION: Watts Dead Level™ D Pre-Sloped Trench Drain System with 6"(152) wide x 48"(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4"(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code. Grate Options: Suffix
Description
-BR -DI -DI-ADA -GDI -PP -GP -GS -RGP -RGS -SP -SS -RSP -RSS -SCI
Decorative Bronze* Ductile Iron Ductile Iron ADA Galvanized Ductile Iron* Polypropylene* Galvanized Perforated Galvanized Slotted Reinforced Galvanized Perforated Reinforced Galvanized Slotted Stainless Steel Perforated Stainless Steel Slotted Reinforced Stainless Steel Perforated Reinforced Stainless Steel Slotted Solid Cast Iron*
Class Class Class Class Class Class Class Class Class Class Class Class Class Class
B F F F A A A E E A A E E F
Options: Suffix Description
FINAL GRATE SELECTION BY OWNER/ARCHITECT. COORDINATE TRENCH DRAIN LAYOUT AND LEGTHS WITH ARCHITECT/POOL CONTRACTOR.
-B6 -B6T -B24 -B24T
6"x24"x24" Catch Basin 6"x24"x24" Catch Basin w/Trash Basket 24"x24"x24" Catch Basin (DI Grate Only) 24"x24"x24" Catch Basin w/Trash Basket (DI Grate Only) -FG Galvanized Steel Frame Guard -FS Stainless Steel Frame Guard -US Buy American Compliant *Not Available with -US
Patent# US 7,967,523 B2 100' 20'
20'
20'
20'
20'
DI-1A DI-2A DI-3A DI-4A DI-5A DI-1B DI-2B DI-3B DI-4B DI-5B DI-1C DI-2C DI-3C DI-4C DI-5C DI-1D DI-2D DI-3D DI-4D DI-5D DI-1E DI-2E DI-3E DI-4E DI-5E DI-AA-N48
DI-AB-N12 DI-AB-N24 DI-AB-N36 DI-AB-N48
FLOW DI-BC-N12 DI-BC-N24 DI-BC-N36 DI-BC-N48
DI-CD-N12 DI-CD-N24 DI-CD-N36 DI-CD-N48
6" (152) 5 3/8" (137) 4 1/2" (114)
A or B (A or B) + 5/16"(.8)
DI-DE-N12 DI-DE-N24 DI-DE-N36 DI-DE-N48
PER FIXTURE SCHED., SHEET P-1. -Robert Kohutek, STG Design.
Dead Level™ D Dimensional Data Part #
ES-WD-DeadLevel-D
Configuration
Length
Weight (lbs.)
Dim. A
Dim. B
DI-AA-N48
Neutral
48" (1219)
31
5-5/8" (143)
5-5/8" (143)
DI-1A
Sloped
48" (1219)
31
5-5/8" (143)
5-15/16" (151)
DI-2A
Sloped
48" (1219)
38
5-15/16" (151)
6-1/4" (159)
DI-3A
Sloped
48" (1219)
40
6-1/4" (159)
6-9/16" (167)
DI-4A
Sloped
48" (1219)
43
6-9/16" (167)
6-7/8" (175)
DI-5A
Sloped
48" (1219)
45
6-7/8" (175)
7-3/16" (183)
DI-AB-N12
Neutral
12" (305)
9
7-3/16" (183)
7-3/16" (183)
DI-AB-N24
Neutral
24" (610)
18
7-3/16" (183)
7-3/16" (183)
DI-AB-N36
Neutral
36" (914)
26
7-3/16" (183)
7-3/16" (183)
DI-AB-N48
Neutral
48" (1219)
32
7-3/16" (183)
7-3/16" (183)
DI-1B
Sloped
48" (1219)
32
7-3/16" (183)
7-1/2" (191)
DI-2B
Sloped
48" (1219)
39
7-1/2" (191)
7-13/16" (198)
DI-3B
Sloped
48" (1219)
41
7-13/16" (198)
8-1/8" (206)
DI-4B
Sloped
48" (1219)
44
8-1/8" (206)
8-7/16" (214)
DI-5B
Sloped
48" (1219)
46
8-7/16" (214)
8-3/4" (222)
DI-BC-N12
Neutral
12" (305)
9
8-3/4" (222)
8-3/4" (222)
DI-BC-N24
Neutral
24" (610)
18
8-3/4" (222)
8-3/4" (222)
DI-BC-N36
Neutral
36" (914)
26
8-3/4" (222)
8-3/4" (222)
DI-BC-N48
Neutral
48" (1219)
32
8-3/4" (222)
8-3/4" (222)
DI-1C
Sloped
48" (1219)
33
8-3/4" (222)
9-1/16" (230)
DI-2C
Sloped
48" (1219)
40
9-1/16" (230)
9-3/8" (238)
DI-3C
Sloped
48" (1219)
42
9-3/8" (238)
9-11/16" (246)
DI-4C
Sloped
48" (1219)
45
9-11/16" (246)
10" (254)
DI-5C
Sloped
48" (1219)
47
10" (254)
10-5/16" (262)
DI-CD-N12
Neutral
12" (305)
9
10-5/16" (262)
10-5/16" (262)
DI-CD-N24
Neutral
24" (610)
18
10-5/16" (262)
10-5/16" (262)
DI-CD-N36
Neutral
36" (914)
26
10-5/16" (262)
10-5/16" (262)
DI-CD-N48
Neutral
48" (1219)
32
10-5/16" (262)
10-5/16" (262)
DI-1D
Sloped
48" (1219)
34
10-5/16" (262)
10-5/8" (270)
DI-2D
Sloped
48" (1219)
41
10-5/8" (270)
10-15/16" (278)
DI-3D
Sloped
48" (1219)
43
10-15/16" (278)
11-1/4" (286)
DI-4D
Sloped
48" (1219)
46
11-1/4" (286)
11-9/16" (294)
DI-5D
Sloped
48" (1219)
48
11-9/16" (294)
11-7/8" (302)
DI-DE-N12
Neutral
12" (305)
10
11-7/8" (302)
11-7/8" (302)
DI-DE-N24
Neutral
24" (610)
19
11-7/8" (302)
11-7/8" (302)
DI-DE-N36
Neutral
36" (914)
27
11-7/8" (302)
11-7/8" (302)
DI-DE-N48
Neutral
48" (1219)
33
11-7/8" (302)
11-7/8" (302)
DI-1E
Sloped
48" (1219)
35
11-7/8" (302)
12-3/16" (310)
DI-2E
Sloped
48" (1219)
42
12-3/16" (310)
12-1/2" (318)
DI-3E
Sloped
48" (1219)
44
12-1/2" (318)
12-13/16" (325)
DI-4E
Sloped
48" (1219)
47
12-13/16" (325)
13-1/8" (333)
DI-5E
Sloped
48" (1219)
49
13-1/8" (333)
13-7/16" (341)
1405
Spec Seq#: 19
** TRENCH NOTE - SPECIFIED TRENCH DRAIN QUOTED AS PER FOOT PRICE SUBJECT TO CHANGE BASED ON FINAL TRENCH DRAIN CONFIGURATION REQUIREMENTS **
NO EXCEPTIONS
Does Not Comply
EXCEPTIONS AS NOTED REJECTED FOR RESUBMITTAL 3
REVIEWED
Please note the VE Options are included in this submittal.
OTHER ______________________________________________ NOTE:
JOB MEASUREMENTS, QUANTITIES AND CONFORMANCE WITH CONTRACT DOCUMENTS ARE THE SPECIFIC RESPONSIBILITY OF THE SUBCONTRACTOR/SUPPLIER
BY:
Thomas Ondrias
BURTON CONSTRUCTION CO. JOB # SUBMITTAL #
10161 - DWTW Plumbing - Drains
DATE: 08/12/2016
No Action Taken
Revise & Resubmit
✔ Exceptions noted, Resubmittal not required
This review is only for general conformance with the design concept and the information given in the Construction Documents. Corrections or comments made on the shop drawings during this review do not relieve the contractor from compliance with the requirements of the plans and specifications. Review of a specific item shall not include review of an assembly of which the item is a component. The Contractor is responsible for dimensions to be confirmed and correlated at the jobsite: information that pertains solely to the fabrication process or to the means, methods, techniques, sequences and procedures of construction: coordination of the Work with that of all other trades and performing Work in a safe and satisfactory manner.
Plumbing Submittal BY KRIS MARLITZ
SUBMITTAL#
DRAINS
DATE
08/22/2016
SPEC
-
NOTE: PROVIDE 2" OVERFLOW AT RD-1 PROVIDE 2" WATER DAM AT OD-1 SEE NOTES ON SPEC FOR TD-1
VE DEL WEBB WOODLANDS/DRAINS Submitted by
THE COMFLOW COMPANY LLC 8/10/2016
MOORE SUPPLY CO 15090 SOMMERMEYER STE 100 HOUSTON, TX 77041 Phone: 832 456-2900 Fax: 832 456-2930 www.mooresupply.com
Spec# 1 2 3
Table of Contents ............ ** CR-1 ** 3498730 WATTS RD-400 DECK RECEPTOR DRAIN ............ ** RD-1 **
4
3668154 WATTS RD-700-3 EPOXY COATED CI DUAL OUTLET ROOF DRAIN/OVERFLOW COMBINATION W/FLASHING CLAMP, INTEGRAL GRAVEL STOP, 4"(102) HIGH INTERNAL OVERFLOW STANDPIPE, SECURED DI DOME, & 3" NO-HUB OUTLETS
5
3672399 WATTS RD-700-6 EPOXY COATED CI DUAL OUTLET ROOF DRAIN/OVERFLOW COMBINATION W/FLASHING CLAMP, INTEGRAL GRAVEL STOP, 4"(102) HIGH INTERNAL OVERFLOW STANDPIPE, SECURED DI DOME, & 6" NO-HUB OUTLETS
6
............ ** OD-1 **
7
3485875 RD-300-R 3-4" WATTS ROOF DRAIN
8
3485878 RD-300-R 6" WATTS ROOF DRAIN
9
3722592 WATTS RD-300-R OVERFLOW DRAIN
10
............ ** ACCESSORIES WHERE REQUIRED **
11
3498730 WATTSDRAIN -F ADJUSTABLE EXTENSION
12
3498730 WATTSDRAIN -D UNDER DECK CLAMPS
13
3498730 WATTSDRAIN -B SUMP RECEIVER
14
............ ** SK-2 **
15
3498730 WATTSDRAIN SI-742-SS-X-US
16
............ ** TD-1 **
17
3498730 TRENCH DLD-SP
18
3498730 TRENCH FG-SS
Spec Seq#: 1
** CR-1 **
Spec Seq#: 2
RD-400
Deck Receptor Drain
Tag:
SPECIFICATION: Watts Drainage RD-400 epoxy coated cast iron deck receptor drain with 2"(51) high receptor flange, internal dome strainer and no hub (standard) outlet. Components
12-11/16"(322)
2“ (51)
B2
B2-R
B2-DM-L
FC-1
Pipe Sizing (Select One) Suffix
4“ (102)
Description
2 3 4
2"(51) Pipe Size 3"(76) Pipe Size 4"(102) Pipe Size
6
6"(152) Pipe Size
6-1/4“ (159)
Outlet Type (Select One) Suffix NH P T X
Description No Hub (MJ) Push On Threaded Outlet Inside Caulk
Options (Select One or More) Suffix
PIPE SIZE
-13 -B -D -F -US
Description All Galvanized Sump Receiver Deck Clamp Deck Flange/Adj. Extension
Buy American Compliant
Optional Body Material Suffix -60 -61
Free Area Sq. In. 42
Description PVC Body w/Socket Outlet ABS Body w/Socket Outlet
Deck opening 10" (254) with sump receiver 13-1/4" (337)
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 t Fax: (828) 248-3929 t Watts.com Canada: Tel: (905) 332-4090 t Fax: (905) 332-7068 t Watts.ca Latin America: Tel: (52) 81-1001-8600 t Fax: (52) 81-8000-7091 t Watts.com
ES-WD-RD-400-USA 1525
A Watts Water Technologies Company
© 2015 Watts
Spec Seq#: 3
** RD-1 **
Spec Seq#: 4-5
Dual Outlet Roof Drain/Overflow
RD-700 Tag:
SPECIFICATION: Watts Drainage RD-700 epoxy coated cast iron dual outlet roof drain/overflow combination with flashing clamp, integral gravel stop, 4"(102) high internal overflow standpipe, secured ductile iron dome, and no hub outlets.
20"(508)
Suffix
Secured Ductile Iron Dome
4"(102)
Flashing Clamp
Primary Outlet
Description
3
3"(76) Pipe Size
4
4"(102) Pipe Size
5
5"(127) Pipe Size
6
6"(152) Pipe Size
Options Suffix -D
5 15/32" (139)
5 1/16" (129)
4"(102) High Overflow
10 17/32"(267)
Pipe Sizing (Select One)
21"(533)
Description Underdeck Clamp
-F
Deck Flange/Adj. Extension
-GSS
Stainless Steel Ballast Guard
-K80
Aluminum Dome
-K83
SS Mesh Covered
-L
Vandal Proof Dome
-W2
2" High Overflow
Aluminum Dome
2"(51) 8"(203) PIPE SIZE 14 25/32" (376) 18 1/2"(470) (DECK OPENING)
PIPE SIZE
Deck Opening: 18-1/2"(470) x 10-1/2"(267) with Sump Receiver: 22"(559) x 14"(356)
20"(508)
Free Area Sq. In. 13 1/16"(332)
157
12 1/16"(307)
6 27/32"(173) 10 1/2"(267) (DECK OPENING) 12 1/16"(307)
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 • Fax: (828) 248-3929 • Watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com
ES-WD-RD-700-USA 1609
A Watts Water Technologies Company
© 2016 Watts
Spec Seq#: 6
** OD-1 **
Spec Seq#:7-13
RD-300 Tag:
High Volume Roof Drain
OD-1
SPECIFICATION: Watts Drainage RD-300 epoxy coated cast iron roof drain with flashing clamp with integral gravel stop, self-locking polyethylene dome (standard), and no hub (standard) outlet. Components
16 5/8”(422) 15 1/4”(387)
B15-FLG
B15
B2-DM
FC-6
Pipe Sizing (Select One) Suffix
6 5/8” (168)
Description
2 3 4
2”(51) Pipe Size (NH Only) 3”(76) Pipe Size 4”(102) Pipe Size
5 6 8 10
5”(127) Pipe Size (NH Only) 6”(152) Pipe Size 8”(203) Pipe Size 10”(254) Pipe Size (NH Only)
Outlet Type (Select One) Suffix
Description
NH P
No Hub (MJ) Push On
X
Inside Caulk
Options (Select One or More)
5 1/2” (140)
Suffix
PIPE SIZE Free Area Sq. In.
137
Deck opening 14-1/2" (368) with sump receiver 18" (457)
Description
-13 -B -D -F -GSS -K -K13
Galvanized Body and Clamp Sump Receiver Underdeck Clamp Deck Flange/Adj. Extension Stainless Steel Ballast Guard Ductile Iron Dome Galvanized Dome
-K40 -K80 -K81 -K83 -L
Ductile Iron Low Dome (4" high) Aluminum Dome Rough Bronze Dome
-85
IRMA Perf. SS Extension
SS Mesh Covered Dome Vandal Proof Dome -R 2" External W Water Dam -SSH SSH St Stainless i l St Steell H Hardware d -US Buy American Compliant -W Adjustable Internal Water Dam
Job Name –––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Representative –––––––––––––––––––––––––––––––––––––––––
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 • Fax: (828) 248-3929 • Watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com
ES-WD-RD-300-USA 1630
© 2016 Watts
Spec Seq#:
** ACCESSORIES WHERE REQUIRED **
Spec Seq#: 14
** SK-2 **
Spec Seq#: 15
SI-742-X
Hair, Plaster & Sediment Interceptor w/Flush Cover
Tag:
SPECIFICATION: Watts Drainage SI-742-X epoxy coated steel sediment interceptor for floor mount or recessed installation, with removable stainless steel sediment basket, gasketed cover, and 2"(51mm) IPS threaded connections. NOTE: 10"(254) clearance required above cover to remove sediment basket.
Options (Select One or More) 7"(178)
Suffix -SS -US
Description Stainless Steel
Buy American Compliant
2"(51) PIPE
8"(203) OUTLET 11"(279)
8"(203) 2"(51)PIPE
INLET
ES-WD-SI-742-X USA 1336
SI-742-X
Spec Seq#: 16
** TD-1 **
Spec Seq#: 17-18
Pre-Sloped Polypropylene Trench Drain System w/Ductile Iron Frame
Dead Level™ D Tag:
SPECIFICATION: Watts Dead Level™ D Pre-Sloped Trench Drain System with 6"(152) wide x 48"(1219) long (standard) ductile iron frame, UV stabilized talc-filled polypropylene channels with integral 4"(102) No Hub bottom outlet(s). System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. Installation to be performed in accordance with manufacturer's instructions and building code. Grate Options: Suffix
Description
-BR -DI -DI-ADA -GDI -PP -GP -GS -RGP -RGS -SP -SS -RSP -RSS -SCI
Decorative Bronze* Ductile Iron Ductile Iron ADA Galvanized Ductile Iron* Polypropylene* Galvanized Perforated Galvanized Slotted Reinforced Galvanized Perforated Reinforced Galvanized Slotted Stainless Steel Perforated Stainless Steel Slotted Reinforced Stainless Steel Perforated Reinforced Stainless Steel Slotted Solid Cast Iron*
Class Class Class Class Class Class Class Class Class Class Class Class Class Class
B F F F A A A E E A A E E F
Options: Suffix Description
FINAL GRATE SELECTION BY OWNER/ARCHITECT. COORDINATE TRENCH DRAIN LAYOUT AND LEGTHS WITH ARCHITECT/POOL CONTRACTOR.
-B6 -B6T -B24 -B24T
6"x24"x24" Catch Basin 6"x24"x24" Catch Basin w/Trash Basket 24"x24"x24" Catch Basin (DI Grate Only) 24"x24"x24" Catch Basin w/Trash Basket (DI Grate Only) -FG Galvanized Steel Frame Guard -FS Stainless Steel Frame Guard -US Buy American Compliant *Not Available with -US
Patent# US 7,967,523 B2 100' 20'
20'
20'
20'
20'
DI-1A DI-2A DI-3A DI-4A DI-5A DI-1B DI-2B DI-3B DI-4B DI-5B DI-1C DI-2C DI-3C DI-4C DI-5C DI-1D DI-2D DI-3D DI-4D DI-5D DI-1E DI-2E DI-3E DI-4E DI-5E DI-AA-N48
DI-AB-N12 DI-AB-N24 DI-AB-N36 DI-AB-N48
FLOW DI-BC-N12 DI-BC-N24 DI-BC-N36 DI-BC-N48
DI-CD-N12 DI-CD-N24 DI-CD-N36 DI-CD-N48
6" (152) 5 3/8" (137) 4 1/2" (114)
A or B (A or B) + 5/16"(.8)
DI-DE-N12 DI-DE-N24 DI-DE-N36 DI-DE-N48
PER FIXTURE SCHED., SHEET P-1. -Robert Kohutek, STG Design.
Dead Level™ D Dimensional Data Part #
ES-WD-DeadLevel-D
Configuration
Length
Weight (lbs.)
Dim. A
Dim. B
DI-AA-N48
Neutral
48" (1219)
31
5-5/8" (143)
5-5/8" (143)
DI-1A
Sloped
48" (1219)
31
5-5/8" (143)
5-15/16" (151)
DI-2A
Sloped
48" (1219)
38
5-15/16" (151)
6-1/4" (159)
DI-3A
Sloped
48" (1219)
40
6-1/4" (159)
6-9/16" (167)
DI-4A
Sloped
48" (1219)
43
6-9/16" (167)
6-7/8" (175)
DI-5A
Sloped
48" (1219)
45
6-7/8" (175)
7-3/16" (183)
DI-AB-N12
Neutral
12" (305)
9
7-3/16" (183)
7-3/16" (183)
DI-AB-N24
Neutral
24" (610)
18
7-3/16" (183)
7-3/16" (183)
DI-AB-N36
Neutral
36" (914)
26
7-3/16" (183)
7-3/16" (183)
DI-AB-N48
Neutral
48" (1219)
32
7-3/16" (183)
7-3/16" (183)
DI-1B
Sloped
48" (1219)
32
7-3/16" (183)
7-1/2" (191)
DI-2B
Sloped
48" (1219)
39
7-1/2" (191)
7-13/16" (198)
DI-3B
Sloped
48" (1219)
41
7-13/16" (198)
8-1/8" (206)
DI-4B
Sloped
48" (1219)
44
8-1/8" (206)
8-7/16" (214)
DI-5B
Sloped
48" (1219)
46
8-7/16" (214)
8-3/4" (222)
DI-BC-N12
Neutral
12" (305)
9
8-3/4" (222)
8-3/4" (222)
DI-BC-N24
Neutral
24" (610)
18
8-3/4" (222)
8-3/4" (222)
DI-BC-N36
Neutral
36" (914)
26
8-3/4" (222)
8-3/4" (222)
DI-BC-N48
Neutral
48" (1219)
32
8-3/4" (222)
8-3/4" (222)
DI-1C
Sloped
48" (1219)
33
8-3/4" (222)
9-1/16" (230)
DI-2C
Sloped
48" (1219)
40
9-1/16" (230)
9-3/8" (238)
DI-3C
Sloped
48" (1219)
42
9-3/8" (238)
9-11/16" (246)
DI-4C
Sloped
48" (1219)
45
9-11/16" (246)
10" (254)
DI-5C
Sloped
48" (1219)
47
10" (254)
10-5/16" (262)
DI-CD-N12
Neutral
12" (305)
9
10-5/16" (262)
10-5/16" (262)
DI-CD-N24
Neutral
24" (610)
18
10-5/16" (262)
10-5/16" (262)
DI-CD-N36
Neutral
36" (914)
26
10-5/16" (262)
10-5/16" (262)
DI-CD-N48
Neutral
48" (1219)
32
10-5/16" (262)
10-5/16" (262)
DI-1D
Sloped
48" (1219)
34
10-5/16" (262)
10-5/8" (270)
DI-2D
Sloped
48" (1219)
41
10-5/8" (270)
10-15/16" (278)
DI-3D
Sloped
48" (1219)
43
10-15/16" (278)
11-1/4" (286)
DI-4D
Sloped
48" (1219)
46
11-1/4" (286)
11-9/16" (294)
DI-5D
Sloped
48" (1219)
48
11-9/16" (294)
11-7/8" (302)
DI-DE-N12
Neutral
12" (305)
10
11-7/8" (302)
11-7/8" (302)
DI-DE-N24
Neutral
24" (610)
19
11-7/8" (302)
11-7/8" (302)
DI-DE-N36
Neutral
36" (914)
27
11-7/8" (302)
11-7/8" (302)
DI-DE-N48
Neutral
48" (1219)
33
11-7/8" (302)
11-7/8" (302)
DI-1E
Sloped
48" (1219)
35
11-7/8" (302)
12-3/16" (310)
DI-2E
Sloped
48" (1219)
42
12-3/16" (310)
12-1/2" (318)
DI-3E
Sloped
48" (1219)
44
12-1/2" (318)
12-13/16" (325)
DI-4E
Sloped
48" (1219)
47
12-13/16" (325)
13-1/8" (333)
DI-5E
Sloped
48" (1219)
49
13-1/8" (333)
13-7/16" (341)
1405
Spec Seq#: 19
** TRENCH NOTE - SPECIFIED TRENCH DRAIN QUOTED AS PER FOOT PRICE SUBJECT TO CHANGE BASED ON FINAL TRENCH DRAIN CONFIGURATION REQUIREMENTS **
