submittal review
SUBMITTAL REVIEW
Submittal No. 110-06200-0
Project Name: West Side Shady Grove Project Location: Rockville, Maryland. Project Number: 2011-0058.01 Spec Section: 06 20 0 Submittal Description: Wood Trim and HC Doors
No Exception Taken
Revise and Resubmit where noted below
Make Corrections Noted
Rejected
Review is only for general conformance with the design concept of the project and general compliance with the information given in the Contract Documents. Corrections or comments made on the shop drawings during this review do not relieve Contractor from compliance with the requirements of the plans and specifications. Review of a specific item shall not include approval of an assembly of which the item is a component. Contractor is responsible for; all dimensions; dimensions to be confirmed and correlated at the job site; field conditions; information that pertains solely to the fabrication processes or to the means, methods, techniques, sequences and procedures of construction; coordination of the Work in a safe and satisfactory manner. Comments:
Date: 07.20.2016
By: Jeremy Haak
WEST SIDE SHADY GROVE
DATE:
7/5/2016
ARCHITECT:
KTGY GROUP, INC/Forrest Perkins
ENGINEER:
TCE
CONTRACTOR:
BOZZUTO CONSTRUCTION COMPANY Submittal Name: 110-06200-0 Wood Trim and HC Doors
Description: 1. The following are included in this submittal: a. SPEC SECTION 06200 – Common area and DU trim b. SPEC SECTION 08211 – DU HC Wood Doors 2. BCC comments are in BLUE.
Bozzuto Construction Company West Side Shady Grove 8010 Gramercy Blvd, Rockville, MD
Submittal Number:
110-06200-0
Reviewed By:
Andrew Gogola
Review Date:
7/5/2016
Subcontractor:
Alco Doors
Submittal Name:
Wood Trim and HC Doors
This submittal has been reviewed and approved by Bozzuto Construction Company. All Bozzuto comments appear in BLUE text throughout.
37160
Paul Hodges
110-06200-0
7/20/16
FP general comments 160720: 1. ForrestPerkins has only reviewed those sections of this submittal which correspond to our scope of work. Any sheet without an "FP comment" was not reviewed by us. 2. The wood trim schedules from drawing I-990 are the basis of design for the trim in the units. All of the scheduled running trim (WD-U-01 through -04) describe the material as "Paint grade solid stock lumber". MDF was not listed. The submitted product for the unit trims is MDF. BCC is asked to confirm whether the submitted product meets the terms of the contract. 3. Use of MDF as base trim at hard flooring that could be washed by the user requires that the trim be held up (1/4" min.) from the finished flooring surface to help prevent water from wicking up into the MDF material. Provide solid lumber pine shoe moulding to conceal the gap. This applies to all amenity space base trim. It's noted that the shoe moulding is included in this submittal for the units. 4. Please reference ASI-13, Fitness Center elevations on sheet I-702 (attached) for notes regarding base trim heights.
West Side Shady Grove ForrestPerkins drawing set, dated 10/9/2015.
7-20-2016
Submittal 110-06200-0
Schedule exhibit from the Issue For Construction
GL-01
WD-02
OPEN
PT-01
WD-02
WD-02
WD-01
OPEN
PT-01 KTGY GROUP INC. 8605 WESTWOOD CENTER DR SUITE 300 TYSONS CORNER, VA 22182 WWW.KTGY.COM 703.992.6116
9' - 7 1/2" 65 ART INSTALLATION BY OTHERS. GC TO ADD BLOCKING. COORDINATE WITH ARCHITECTURAL LIGHTBOX.
OPEN SPECIALTY WALLCOVERING AND ART INSTALLATION AT "NUCLEUS"
3' - 11"
OPEN
PT-01
OPEN 144"X120"
65
CLIENTS:
65
6' - 4"
40"X48"
5' - 0"
65
4800 HAMPTON LANE, SUITE 300 BETHESDA, MD 20814 301.634.8600
4"
ART INSTALLATION BY OTHERS. GC TO ADD BLOCKING.
WD-02 SOLID WOOD BASE
PT-03
1
WD-01
PT-03
WD-01 SOLID WOOD BASE
WD-02 SOLID WOOD BASE
WD-02 SOLID WOOD BASE
PT-03
PT-03
ELEVATION AT CORRIDOR TO GAME ROOM 1/4" = 1'-0"
7
7850 WALKER DRIVE, SUIT 400 GREENBELT, MD 20770 301.220.0100
ELEVATION AT CORRIDOR TO ELEVATOR LOBBY - 2 1/4" = 1'-0"
INTERIOR DESIGN ONSULTANT:
2121 WISCONSON AVE, NW, SUITE 100 WASHINGTON, DC 20007 WWW.FORRESTPERKINS.COM 202-478-8810
PT-01 PT-01
WD-02 91
PT-07
WD-01 METAL SLUTER TRIM TO BE PROVIDED ABOVE WALL MIRRORS.
SEAL
PT-01
1' - 4"
1' - 4"
PT-03
1/2" X 1/2" DRYWALL REVEAL
2
6"
10"
9' - 6"
ALIGN
INDICATOR LIGHTS ON INTERIOR FACE OF JAMB, TYP
1/2" X 1/2" DRYWALL REVEAL
WD-01 SOLID WOOD BASE
WD-02 SOLID WOOD BASE
PT-03
GL-02 PT-01
PT-03 THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
ELEVATION AT CORRIDOR TO ELEVATOR LOBBY 1/4" = 1'-0"
8
ELEVATION AT YOGA STUDIO 1/4" = 1'-0"
PT-04
PT-01
PT-04
PT-01 PT-01
GL-03
METAL SLUTER TRIM TO BE PROVIDED ABOVE WALL MIRRORS.
ALIGN
10' - 0"
5 I-817
PT-03
PT-03
GL-02
PT-03
THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
3
GL-02
DH-02
PT-03
91
4
65
DH-01
CT-01
2 I-805
SPECIAL UNUSUALLY LOW 3 1/2" BASE TO FIT UNDER TOE KICK OF CREDENZA.
ELEVATION AT FITNESS CENTER FEATURE WALL 1/4" = 1'-0"
CT-05
GL-02
GL-03
78
CT-06
4"
GL-03
6"
DH-02
CT-05
WC-02
3' - 6"
2 I-811
Sim
GL-02
11 3/4" 18"X70" ARTWORK. GC TO PROVIDE BLOCKING
9' - 6"
13' - 6"
CT-07
THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
78
5
ELEVATION AT POWDER ROOM 1/4" = 1'-0"
6
ELEVATION AT LOCKER ROOM 1/4" = 1'-0"
NO. 65 78 91 98
8010 GRAMERCY BLVD, ROCKVILLE, MARYLAND
PT-01
WEST SIDE SHADY GROVE
91
DRAWING ISSUE DESCRIPTION RFI #80 Submittal 055-08411-0 ASI # 13 RFI #111
DATE 2016.02.12 2016.03.14 2016.04.18 2016.04.18
ELEVATION AT FITNESS CENTER MILLWORK/ENTRY WALL 1/4" = 1'-0"
? PT-01
DESIGN DELIVERABLE: ISSUED FOR CONSTRUCTION ISSUE DATE: 10/09/2015 ALIGN PROJECT NUMBER: 351 DRAWN BY: FP 9' - 6"
CHECKED BY: FP
Copyright (c) by ForrestPerkins. All Rights Reserved.
6'-0"
ELEVATIONS
6 1/4"
PLOT DATE: 4/18/2016 12:34:59 PM
SHEET TITLE:
THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
9
? PT-03
ELEVATION AT FITNESS CENTER SOUTH WALL 1/4" = 1'-0"
? GL-02
West Side Shady Grove
ForrestPerkins
7-20-2016
Submittal 110-06200-0
Drawing exhibit from ASI-13.
SHEET NUMBER:
I-702
Submittal Phone: Fax: General Contractor: Bozzuto Construction
410-566-7800 410-566-3822
ALCO Doors
Sales Representative: Rob Moser Date: 5/6/2016 Project: West Side Shady Grove See COR #037 for changes related to finish trim and HC doors
Rockville, MD 20850
Section:
Submittal Item:
06200
Finish Trim
08000
Unit Interior Doors
Page 1 of 10
Submittal West Side Shady Grove
Project:
Unit Interior Baseboard
9/16 in per I-990
Unit Interior Prehung Door Casing(both sides)
Phone: Fax:
Finish Trim- Units
5 1/4" per I-990
410-566-7800 410-566-3822
4 1/4" from window to stud + 5/8" gyp + 3/8" = 5 1/4" Would not allow for an overhang. 7 1/4" is acceptable.
WM432
WM452
Unit Window Stool WM1021LP
Unit Shoe WM129P
12mm x 3-1/2"
15mm x 2-1/2"
18mm x 7-1/4" (verify depth)
7/16" x 11/16"
MDF Primed
MDF Primed
MDF Primed
Primed FJ Pine
Unit Window Apron WM452 15mm x 2-1/2" MDF Primed
FP comment 160720: The use of MDF as any horizontal finished surface is not advisable, due to irreparable damage from water. FP highly recommends the use of solid lumber poplar for the unit window sills.
3/8" x 2-1/4" per I-990
FP comment 160720: Use this same shoe moulding at all base trims in the amenity spaces. See general comment #2 on cover page of this submittal.
Specs/Architectural drawings and ID drawings differ in some instances. Please confirm which is to be followed
FP comment 160720: No exceptions taken to the moulding sizes as submitted. Page 2 of 10
Submittal West Side Shady Grove
Project:
Unit Interior- Type "C" Linen Shelves
Unit Desk Shelf Board 1x12 MDF
Unit Desk Shelf Cleat S4S Cleat
18mm x 11-1/4"
18mm x 18mm
MDF Primed
MDF Primed
Phone: Fax:
Type "C" MDF Shelf example: Desk Shelf Board
Shelf Cleat
Please confirm sizes
Page 3 of 10
410-566-7800 410-566-3822
Submittal West Side Shady Grove
Project:
Common Area Trim
Amenity Base 1x10 MDF
Corridor Base WM430
18mm x 9-1/4"
12mm x 4-1/4"
MDF Primed
MDF Primed
10"x1/2" per I-005. Please confirm
FP comment 160720: No exceptions taken to size.
OK per I-005. Please confirm
FP comment 160720: No exceptions taken to size.
Page 4 of 10
Phone: Fax:
410-566-7800 410-566-3822
Submittal Project:
Phone: Fax:
West Side Shady Grove
410-566-7800 410-566-3822
Single Swing Unit Interior Doors Door Dimensions:
Various Widths, 6'8" tall, 1-3/8" thick
Door Design:
Masonite Heritage Series Lincoln Park
Door Core:
Hollow Core
Prehung (Yes/No):
Yes
LEEDS Credits:
No
Hardware Prep:
Single 2-1/8" Bore at 2-3/8" Backset, RC Lip Strike
Jamb Type:
Split Jamb Fingerjoint Wood
Jamb Size: Finish- Raw/Primed: Hinges:
4-1/4" - 4-7/8" Primed 3-1/2" x 3-1/2" Radius Corner 5/8", US26 (Chrome)
Door Casing: Casing Type:
WM452 15mm x 2-1/2" MDF Primed
Rough Opening Guidelines:
Add 2" to Nominal Width Add 2-1/2" to Nominal Height
Example:
3-0 x 6-8 Nominal = 3' 2" x 6' 10-1/2" R.O.
Split Jamb Detail:
36" to CL of Lock bore from bottom of door slab Casing Profile:
10" Bottom Rail 7/8" Undercut Hinge Detail:
*Illustration not to scale.
Page 5 of 10
U08 - Laundry Door Project:
Submittal Phone: Fax:
U07 Louver Door? 2'-4" x 6'-8"
West Side Shady Grove
410-566-7800 410-566-3822
U06 Louver Doors
2'-8" Per AA-603
Door Dimensions:
2'10" x 6'8" tall, 1-3/8" thick
Door Design:
Louver over Louver MDF Primed
Door Core:
Stile & Rail
Prehung (Yes/No):
Yes
LEEDS Credits:
No
Rough Opening Guidelines:
Add 2" to Nominal Width Add 2-1/2" to Nominal Height
Example:
3-0 x 6-8 Nominal = 3' 2" x 6' 10-1/2" R.O.
Split Jamb Detail:
*Louver over Louver design required for air flow* Hardware Prep:
Single 2-1/8" Bore at 2-3/8" Backset, RC Lip Strike
Jamb Type:
Split Jamb Fingerjoint Wood
Jamb Size: Finish- Raw/Primed: Hinges:
4-1/4" - 4-7/8" Primed 3-1/2" x 3-1/2" Radius Corner 5/8", US26 (Chrome)
Door Casing: Casing Type:
WM452 15mm x 2-1/2" MDF Primed
36" to CL of Lock bore from bottom of door slab Casing Profile:
8" Bottom Rail 7/8" Undercut Hinge Detail:
*Illustration not to scale.
Page 6 of 10
West Side Shady Grove Standard Single Prehung Interior Door- JAMB PREP
Standard Single Prehung Interior Door- Bore/Latch prep 2-3/8"
NOTES
Prehung Interior Doors Hardware Preps *No lock prep at pairs of doors. Pairs to receive ball catches at top of each slab.*
Page 8 of 10
Submittal Project:
Phone: Fax:
West Side Shady Grove Closet Doors- Pairs
410-566-7800 410-566-3822
Ball Catches
Door Dimensions:
Various Widths, 6'8" tall, 1-3/8" thick
Door Design:
Masonite Heritage Series Lincoln Park
Door Core:
Hollow Core
Prehung (Yes/No):
Yes
LEEDS Credits:
No Ball Catch Detail:
Hardware Prep:
No bores, Ball Catches and Strikes at header
Jamb Type: Jamb Size: Finish- Raw/Primed: Hinges:
Split Jamb Fingerjoint Wood 4-9/16" Primed 3-1/2" x 3-1/2" Radius Corner 5/8", US26 (Chrome)
Door Casing: Casing Type:
WM452 15mm x 2-1/2" MDF Primed
Casing Profile:
10" Bottom Rail 7/8" Undercut Hinge Detail:
*Illustration not to scale.
Split Jamb Detail:
Rough Opening Guidelines: Example:
Page 9 of 10
Add 2-1/4" to Nominal Width Add 2-1/2" to Nominal Height 4-0 x 6-8 Nominal = 4'- 2-1/4" x 6' 10-1/2" R.O.
Site Requirements Phone: Fax: DATE: PROJECT:
Section: 08-000 06-200
410-566-7800 410-566-3822
5/6/2016 West Side Shady Grove
Submittal Item Unit Interior Doors Finish Trim
ALCO Doors will not be held liable for door functionality if the following condtions are not followed prior to jobsite delivery. Painting:
1) All door slabs need to be finish painted all 6 sides(top, bottom, sides, faces) to maintain standard warranty.
Storage & Handling:
1) Store door units in a protected, dry area at least 6" off floor. 2) Stack door units so that water cannot accumulate on or within materials, using shims to provide drainage and air circulation. 3) Protect door units from direct exposure to light, extreme heat, dryness, and moisture.
Ambient Conditions:
1) Spaces shall be ready to receive door units with temperature and humidity controlled to avoid damage by excessive changes in atmospheric conditions. Temperature and humidity shall be stabilized in installation areas at an approximate level that will prevail in building when occupied. Relative humidity shall not be less than 30% or more than 60%.
Page 10 of 10
Bozzuto WSSG
U02b
30
1 Panel
3'-0"
6'-8"
door stop?
ALCO - Provide same hardware that is currently installed in the unit mock-up
Please advise Strap option...
Barn Door Hardware
Wall Mounted Barn Door Kits
STRAIGHT STRAP (BD100K)
TOP OF DOOR STRAP (BD101K)
BRONZE SHOWN
MATT BLACK
BRONZE
ALCO - Provide hardware currently installed in mock-up
STAINLESS STEEL SHOWN
BENT STRAP (BD102K) MATT BLACK SHOWN
STAINLESS STEEL
Product Description • Hardware available for 1-3/8" and 1-3/4" thick doors weighing up to 250 lbs. • Kits available in 78 3/4" and 96" track widths, including door straps, all mounting hardware and floor guide options • Available in three factory finishes: Matt Black, Bronze and Stainless Steel • Factory finished, ready-to-install • Ideal for openings 28" - 34" wide for 78 3/4" track and openings 34" - 44" wide for 96" track • Unique barn door style hardware enables door to slide parallel to wall • Use for closet, room divider or passage door applications • Available accessories: Handle, Pull, Privacy latch (internal-side) and track connector for bi-parting door application
Sectional Drawings STRAIGHT STRAP (BD100K)
CUSTOMER SERVICE: FOR PRODUCT INQUIRIES AND AVAILABILITY GO TO: www.renincorp.com www.acmesystemsandhardware.com
TOP OF DOOR STRAP (BD101K)
TO EMAIL ORDERS: [email protected] TO EMAIL QUOTES: [email protected] Phone: 1-800-493-5263 Fax: 1-800-481-4659
BENT STRAP (BD102K)
MKTD2992 Rev. B
WALL MOUNTED BARN DOOR KITS
Barn Door Kit Options Available
78 3/4 in (2000 mm) 17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
Tracks available 78 3/4 in (2000 mm)
WALL MOUNTED BARN DOOR KITS
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
96 in (2438 mm) 17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
96 in (2438 mm)
Replacement Hardware, Spare Parts & Accessories 17 11/16 in (450 mm)
DESCRIPTION
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
PART NUMBER
FINISH
CONTENTS / PKG
Straight Strap Hanger
BD550-SS
Stainless Steel
x1 Strap & Mounting Hardware
Straight Strap Hanger
BD550-MB
Matt Black
x1 Strap & Mounting Hardware
Straight Strap Hanger
BD550-BR
Bronze
x1 Strap & Mounting Hardware
Top Strap Hanger
BD551-SS
Stainless Steel
x1 Strap & Mounting Hardware
Top Strap Hanger
BD551-MB
Matt Black
x1 Strap & Mounting Hardware
Top Strap Hanger
BD551-BR
Bronze
x1 Strap & Mounting Hardware
Bent Strap Hanger
BD552-SS
Stainless Steel
x1 Strap & Mounting Hardware
Bent Strap Hanger
BD552-MD
Matt Black
x1 Strap & Mounting Hardware
Bent Strap Hanger
BD552-BR
Bronze
x1 Strap & Mounting Hardware
1 3/8" Strap Bolt
BD130-SS
Stainless Steel
x1 1 3/8" Strap Bolt & Mounting Hardware
1 3/8" Strap Bolt
BD130-MBBR
Matt Black/Bronze
x1 1 3/8" Strap Bolt & Mounting Hardware
1 3/4" Strap Bolt
BD133-SS
Stainless Steel
x1 1 3/4" Strap Bolt & Mounting Hardware
1 3/4" Strap Bolt
BD133-MBBR
Matt Black/Bronze
x1 1 3/4" Strap Bolt & Mounting Hardware
96" Track
BD5000-09600-SS
Stainless Steel
x1 Track (Wall Spacer Hardware Sold Separately)
96" Track
BD5000-09600-MB
Matt Black
x1 Track (Wall Spacer Hardware Sold Separately)
96" Track
BD5000-09600-BR
Bronze
x1 Track (Wall Spacer Hardware Sold Separately)
Wall Spacer
BD350-SS
Stainless Steel
x1 Spacer
Wall Spacer
BD350-MB
Matt Black
x1 Spacer
Wall Spacer
BD350-BR
Bronze
x1 Spacer
Bolt for Wall Spacer
BD136-SS
Stainless Steel
x1 Bolt & Mounting Hardware
Bolt for Wall Spacer
BD136-MBBR
Matt Black/Bronze
x1 Bolt & Mounting Hardware
Track Stops (Left or Right)
BD850-SS
Stainless Steel
x1 Left or x1 Right Track Stop & Adjustment Allen Key
Track Stops (Left or Right)
BD850-MB
Matt Black
x1 Left or x1 Right Track Stop & Adjustment Allen Key
Track Stops (Left or Right)
BD850-BR
Bronze
x1 Left or x1 Right Track Stop & Adjustment Allen Key
Track Joiner for Bi-Parting Doors
BD125-SS
Stainless Steel
x1 Track Joiner & Mounting Hardware
Track Joiner for Bi-Parting Doors
BD125-MB
Matt Black
x1 Track Joiner & Mounting Hardware
Track Joiner for Bi-Parting Doors
BD125-BR
Bronze
x1 Track Joiner & Mounting Hardware
Door Latch
BD250 -SS
Stainless Steel
x1 Latch & Mounting Hardware
Door Latch
BD250-MB
Matt Black
x1 Latch & Mounting Hardware
Door Latch
BD250-BR
Bronze
x1 Latch & Mounting Hardware
Wall Mount Guide & Double Floor Guides (No Dado)
99161
White Nylon
x1 Wall Mount Guide, x2 Floor Guides & Mounting Hardware
Single Floor Guide (Dado)
BD750
Black Nylon
x1 Floor Guide & Mounting Hardware
Anti-Jump Blocks
BD790
Black Nylon
x2 Anti-Jump Blocks & Mounting Hardware
Handle & Pull Combination
BD470-SS
Stainless Steel
x1 Handle & x1 Pull Combination
Handle & Pull Combination
BD470-MB
Matt Black
x1 Handle & x1 Pull Combination
Handle & Pull Combination
BD470-BR
Bronze
x1 Handle & x1 Pull Combination
Pull
BD460-SS
Stainless Steel
x1 Pull
Pull
BD460-MB
Matt Black
x1 Pull
Pull
BD460-BR
Bronze
x1 Pull
Handle
BD450-SS
Stainless Steel
x1 Handle
Handle
BD450-MB
Matt Black
x1 Handle
Handle
BD450-BR
Bronze
x1 Handle
Submittal No. 110-06200-0
Project Name: West Side Shady Grove Project Location: Rockville, Maryland. Project Number: 2011-0058.01 Spec Section: 06 20 0 Submittal Description: Wood Trim and HC Doors
No Exception Taken
Revise and Resubmit where noted below
Make Corrections Noted
Rejected
Review is only for general conformance with the design concept of the project and general compliance with the information given in the Contract Documents. Corrections or comments made on the shop drawings during this review do not relieve Contractor from compliance with the requirements of the plans and specifications. Review of a specific item shall not include approval of an assembly of which the item is a component. Contractor is responsible for; all dimensions; dimensions to be confirmed and correlated at the job site; field conditions; information that pertains solely to the fabrication processes or to the means, methods, techniques, sequences and procedures of construction; coordination of the Work in a safe and satisfactory manner. Comments:
Date: 07.20.2016
By: Jeremy Haak
WEST SIDE SHADY GROVE
DATE:
7/5/2016
ARCHITECT:
KTGY GROUP, INC/Forrest Perkins
ENGINEER:
TCE
CONTRACTOR:
BOZZUTO CONSTRUCTION COMPANY Submittal Name: 110-06200-0 Wood Trim and HC Doors
Description: 1. The following are included in this submittal: a. SPEC SECTION 06200 – Common area and DU trim b. SPEC SECTION 08211 – DU HC Wood Doors 2. BCC comments are in BLUE.
Bozzuto Construction Company West Side Shady Grove 8010 Gramercy Blvd, Rockville, MD
Submittal Number:
110-06200-0
Reviewed By:
Andrew Gogola
Review Date:
7/5/2016
Subcontractor:
Alco Doors
Submittal Name:
Wood Trim and HC Doors
This submittal has been reviewed and approved by Bozzuto Construction Company. All Bozzuto comments appear in BLUE text throughout.
37160
Paul Hodges
110-06200-0
7/20/16
FP general comments 160720: 1. ForrestPerkins has only reviewed those sections of this submittal which correspond to our scope of work. Any sheet without an "FP comment" was not reviewed by us. 2. The wood trim schedules from drawing I-990 are the basis of design for the trim in the units. All of the scheduled running trim (WD-U-01 through -04) describe the material as "Paint grade solid stock lumber". MDF was not listed. The submitted product for the unit trims is MDF. BCC is asked to confirm whether the submitted product meets the terms of the contract. 3. Use of MDF as base trim at hard flooring that could be washed by the user requires that the trim be held up (1/4" min.) from the finished flooring surface to help prevent water from wicking up into the MDF material. Provide solid lumber pine shoe moulding to conceal the gap. This applies to all amenity space base trim. It's noted that the shoe moulding is included in this submittal for the units. 4. Please reference ASI-13, Fitness Center elevations on sheet I-702 (attached) for notes regarding base trim heights.
West Side Shady Grove ForrestPerkins drawing set, dated 10/9/2015.
7-20-2016
Submittal 110-06200-0
Schedule exhibit from the Issue For Construction
GL-01
WD-02
OPEN
PT-01
WD-02
WD-02
WD-01
OPEN
PT-01 KTGY GROUP INC. 8605 WESTWOOD CENTER DR SUITE 300 TYSONS CORNER, VA 22182 WWW.KTGY.COM 703.992.6116
9' - 7 1/2" 65 ART INSTALLATION BY OTHERS. GC TO ADD BLOCKING. COORDINATE WITH ARCHITECTURAL LIGHTBOX.
OPEN SPECIALTY WALLCOVERING AND ART INSTALLATION AT "NUCLEUS"
3' - 11"
OPEN
PT-01
OPEN 144"X120"
65
CLIENTS:
65
6' - 4"
40"X48"
5' - 0"
65
4800 HAMPTON LANE, SUITE 300 BETHESDA, MD 20814 301.634.8600
4"
ART INSTALLATION BY OTHERS. GC TO ADD BLOCKING.
WD-02 SOLID WOOD BASE
PT-03
1
WD-01
PT-03
WD-01 SOLID WOOD BASE
WD-02 SOLID WOOD BASE
WD-02 SOLID WOOD BASE
PT-03
PT-03
ELEVATION AT CORRIDOR TO GAME ROOM 1/4" = 1'-0"
7
7850 WALKER DRIVE, SUIT 400 GREENBELT, MD 20770 301.220.0100
ELEVATION AT CORRIDOR TO ELEVATOR LOBBY - 2 1/4" = 1'-0"
INTERIOR DESIGN ONSULTANT:
2121 WISCONSON AVE, NW, SUITE 100 WASHINGTON, DC 20007 WWW.FORRESTPERKINS.COM 202-478-8810
PT-01 PT-01
WD-02 91
PT-07
WD-01 METAL SLUTER TRIM TO BE PROVIDED ABOVE WALL MIRRORS.
SEAL
PT-01
1' - 4"
1' - 4"
PT-03
1/2" X 1/2" DRYWALL REVEAL
2
6"
10"
9' - 6"
ALIGN
INDICATOR LIGHTS ON INTERIOR FACE OF JAMB, TYP
1/2" X 1/2" DRYWALL REVEAL
WD-01 SOLID WOOD BASE
WD-02 SOLID WOOD BASE
PT-03
GL-02 PT-01
PT-03 THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
ELEVATION AT CORRIDOR TO ELEVATOR LOBBY 1/4" = 1'-0"
8
ELEVATION AT YOGA STUDIO 1/4" = 1'-0"
PT-04
PT-01
PT-04
PT-01 PT-01
GL-03
METAL SLUTER TRIM TO BE PROVIDED ABOVE WALL MIRRORS.
ALIGN
10' - 0"
5 I-817
PT-03
PT-03
GL-02
PT-03
THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
3
GL-02
DH-02
PT-03
91
4
65
DH-01
CT-01
2 I-805
SPECIAL UNUSUALLY LOW 3 1/2" BASE TO FIT UNDER TOE KICK OF CREDENZA.
ELEVATION AT FITNESS CENTER FEATURE WALL 1/4" = 1'-0"
CT-05
GL-02
GL-03
78
CT-06
4"
GL-03
6"
DH-02
CT-05
WC-02
3' - 6"
2 I-811
Sim
GL-02
11 3/4" 18"X70" ARTWORK. GC TO PROVIDE BLOCKING
9' - 6"
13' - 6"
CT-07
THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
78
5
ELEVATION AT POWDER ROOM 1/4" = 1'-0"
6
ELEVATION AT LOCKER ROOM 1/4" = 1'-0"
NO. 65 78 91 98
8010 GRAMERCY BLVD, ROCKVILLE, MARYLAND
PT-01
WEST SIDE SHADY GROVE
91
DRAWING ISSUE DESCRIPTION RFI #80 Submittal 055-08411-0 ASI # 13 RFI #111
DATE 2016.02.12 2016.03.14 2016.04.18 2016.04.18
ELEVATION AT FITNESS CENTER MILLWORK/ENTRY WALL 1/4" = 1'-0"
? PT-01
DESIGN DELIVERABLE: ISSUED FOR CONSTRUCTION ISSUE DATE: 10/09/2015 ALIGN PROJECT NUMBER: 351 DRAWN BY: FP 9' - 6"
CHECKED BY: FP
Copyright (c) by ForrestPerkins. All Rights Reserved.
6'-0"
ELEVATIONS
6 1/4"
PLOT DATE: 4/18/2016 12:34:59 PM
SHEET TITLE:
THE BASE UNDER THESE WALL MIRRORS IS TO BE 6" HIGH, AND PAINTED WOOD.
9
? PT-03
ELEVATION AT FITNESS CENTER SOUTH WALL 1/4" = 1'-0"
? GL-02
West Side Shady Grove
ForrestPerkins
7-20-2016
Submittal 110-06200-0
Drawing exhibit from ASI-13.
SHEET NUMBER:
I-702
Submittal Phone: Fax: General Contractor: Bozzuto Construction
410-566-7800 410-566-3822
ALCO Doors
Sales Representative: Rob Moser Date: 5/6/2016 Project: West Side Shady Grove See COR #037 for changes related to finish trim and HC doors
Rockville, MD 20850
Section:
Submittal Item:
06200
Finish Trim
08000
Unit Interior Doors
Page 1 of 10
Submittal West Side Shady Grove
Project:
Unit Interior Baseboard
9/16 in per I-990
Unit Interior Prehung Door Casing(both sides)
Phone: Fax:
Finish Trim- Units
5 1/4" per I-990
410-566-7800 410-566-3822
4 1/4" from window to stud + 5/8" gyp + 3/8" = 5 1/4" Would not allow for an overhang. 7 1/4" is acceptable.
WM432
WM452
Unit Window Stool WM1021LP
Unit Shoe WM129P
12mm x 3-1/2"
15mm x 2-1/2"
18mm x 7-1/4" (verify depth)
7/16" x 11/16"
MDF Primed
MDF Primed
MDF Primed
Primed FJ Pine
Unit Window Apron WM452 15mm x 2-1/2" MDF Primed
FP comment 160720: The use of MDF as any horizontal finished surface is not advisable, due to irreparable damage from water. FP highly recommends the use of solid lumber poplar for the unit window sills.
3/8" x 2-1/4" per I-990
FP comment 160720: Use this same shoe moulding at all base trims in the amenity spaces. See general comment #2 on cover page of this submittal.
Specs/Architectural drawings and ID drawings differ in some instances. Please confirm which is to be followed
FP comment 160720: No exceptions taken to the moulding sizes as submitted. Page 2 of 10
Submittal West Side Shady Grove
Project:
Unit Interior- Type "C" Linen Shelves
Unit Desk Shelf Board 1x12 MDF
Unit Desk Shelf Cleat S4S Cleat
18mm x 11-1/4"
18mm x 18mm
MDF Primed
MDF Primed
Phone: Fax:
Type "C" MDF Shelf example: Desk Shelf Board
Shelf Cleat
Please confirm sizes
Page 3 of 10
410-566-7800 410-566-3822
Submittal West Side Shady Grove
Project:
Common Area Trim
Amenity Base 1x10 MDF
Corridor Base WM430
18mm x 9-1/4"
12mm x 4-1/4"
MDF Primed
MDF Primed
10"x1/2" per I-005. Please confirm
FP comment 160720: No exceptions taken to size.
OK per I-005. Please confirm
FP comment 160720: No exceptions taken to size.
Page 4 of 10
Phone: Fax:
410-566-7800 410-566-3822
Submittal Project:
Phone: Fax:
West Side Shady Grove
410-566-7800 410-566-3822
Single Swing Unit Interior Doors Door Dimensions:
Various Widths, 6'8" tall, 1-3/8" thick
Door Design:
Masonite Heritage Series Lincoln Park
Door Core:
Hollow Core
Prehung (Yes/No):
Yes
LEEDS Credits:
No
Hardware Prep:
Single 2-1/8" Bore at 2-3/8" Backset, RC Lip Strike
Jamb Type:
Split Jamb Fingerjoint Wood
Jamb Size: Finish- Raw/Primed: Hinges:
4-1/4" - 4-7/8" Primed 3-1/2" x 3-1/2" Radius Corner 5/8", US26 (Chrome)
Door Casing: Casing Type:
WM452 15mm x 2-1/2" MDF Primed
Rough Opening Guidelines:
Add 2" to Nominal Width Add 2-1/2" to Nominal Height
Example:
3-0 x 6-8 Nominal = 3' 2" x 6' 10-1/2" R.O.
Split Jamb Detail:
36" to CL of Lock bore from bottom of door slab Casing Profile:
10" Bottom Rail 7/8" Undercut Hinge Detail:
*Illustration not to scale.
Page 5 of 10
U08 - Laundry Door Project:
Submittal Phone: Fax:
U07 Louver Door? 2'-4" x 6'-8"
West Side Shady Grove
410-566-7800 410-566-3822
U06 Louver Doors
2'-8" Per AA-603
Door Dimensions:
2'10" x 6'8" tall, 1-3/8" thick
Door Design:
Louver over Louver MDF Primed
Door Core:
Stile & Rail
Prehung (Yes/No):
Yes
LEEDS Credits:
No
Rough Opening Guidelines:
Add 2" to Nominal Width Add 2-1/2" to Nominal Height
Example:
3-0 x 6-8 Nominal = 3' 2" x 6' 10-1/2" R.O.
Split Jamb Detail:
*Louver over Louver design required for air flow* Hardware Prep:
Single 2-1/8" Bore at 2-3/8" Backset, RC Lip Strike
Jamb Type:
Split Jamb Fingerjoint Wood
Jamb Size: Finish- Raw/Primed: Hinges:
4-1/4" - 4-7/8" Primed 3-1/2" x 3-1/2" Radius Corner 5/8", US26 (Chrome)
Door Casing: Casing Type:
WM452 15mm x 2-1/2" MDF Primed
36" to CL of Lock bore from bottom of door slab Casing Profile:
8" Bottom Rail 7/8" Undercut Hinge Detail:
*Illustration not to scale.
Page 6 of 10
West Side Shady Grove Standard Single Prehung Interior Door- JAMB PREP
Standard Single Prehung Interior Door- Bore/Latch prep 2-3/8"
NOTES
Prehung Interior Doors Hardware Preps *No lock prep at pairs of doors. Pairs to receive ball catches at top of each slab.*
Page 8 of 10
Submittal Project:
Phone: Fax:
West Side Shady Grove Closet Doors- Pairs
410-566-7800 410-566-3822
Ball Catches
Door Dimensions:
Various Widths, 6'8" tall, 1-3/8" thick
Door Design:
Masonite Heritage Series Lincoln Park
Door Core:
Hollow Core
Prehung (Yes/No):
Yes
LEEDS Credits:
No Ball Catch Detail:
Hardware Prep:
No bores, Ball Catches and Strikes at header
Jamb Type: Jamb Size: Finish- Raw/Primed: Hinges:
Split Jamb Fingerjoint Wood 4-9/16" Primed 3-1/2" x 3-1/2" Radius Corner 5/8", US26 (Chrome)
Door Casing: Casing Type:
WM452 15mm x 2-1/2" MDF Primed
Casing Profile:
10" Bottom Rail 7/8" Undercut Hinge Detail:
*Illustration not to scale.
Split Jamb Detail:
Rough Opening Guidelines: Example:
Page 9 of 10
Add 2-1/4" to Nominal Width Add 2-1/2" to Nominal Height 4-0 x 6-8 Nominal = 4'- 2-1/4" x 6' 10-1/2" R.O.
Site Requirements Phone: Fax: DATE: PROJECT:
Section: 08-000 06-200
410-566-7800 410-566-3822
5/6/2016 West Side Shady Grove
Submittal Item Unit Interior Doors Finish Trim
ALCO Doors will not be held liable for door functionality if the following condtions are not followed prior to jobsite delivery. Painting:
1) All door slabs need to be finish painted all 6 sides(top, bottom, sides, faces) to maintain standard warranty.
Storage & Handling:
1) Store door units in a protected, dry area at least 6" off floor. 2) Stack door units so that water cannot accumulate on or within materials, using shims to provide drainage and air circulation. 3) Protect door units from direct exposure to light, extreme heat, dryness, and moisture.
Ambient Conditions:
1) Spaces shall be ready to receive door units with temperature and humidity controlled to avoid damage by excessive changes in atmospheric conditions. Temperature and humidity shall be stabilized in installation areas at an approximate level that will prevail in building when occupied. Relative humidity shall not be less than 30% or more than 60%.
Page 10 of 10
Bozzuto WSSG
U02b
30
1 Panel
3'-0"
6'-8"
door stop?
ALCO - Provide same hardware that is currently installed in the unit mock-up
Please advise Strap option...
Barn Door Hardware
Wall Mounted Barn Door Kits
STRAIGHT STRAP (BD100K)
TOP OF DOOR STRAP (BD101K)
BRONZE SHOWN
MATT BLACK
BRONZE
ALCO - Provide hardware currently installed in mock-up
STAINLESS STEEL SHOWN
BENT STRAP (BD102K) MATT BLACK SHOWN
STAINLESS STEEL
Product Description • Hardware available for 1-3/8" and 1-3/4" thick doors weighing up to 250 lbs. • Kits available in 78 3/4" and 96" track widths, including door straps, all mounting hardware and floor guide options • Available in three factory finishes: Matt Black, Bronze and Stainless Steel • Factory finished, ready-to-install • Ideal for openings 28" - 34" wide for 78 3/4" track and openings 34" - 44" wide for 96" track • Unique barn door style hardware enables door to slide parallel to wall • Use for closet, room divider or passage door applications • Available accessories: Handle, Pull, Privacy latch (internal-side) and track connector for bi-parting door application
Sectional Drawings STRAIGHT STRAP (BD100K)
CUSTOMER SERVICE: FOR PRODUCT INQUIRIES AND AVAILABILITY GO TO: www.renincorp.com www.acmesystemsandhardware.com
TOP OF DOOR STRAP (BD101K)
TO EMAIL ORDERS: [email protected] TO EMAIL QUOTES: [email protected] Phone: 1-800-493-5263 Fax: 1-800-481-4659
BENT STRAP (BD102K)
MKTD2992 Rev. B
WALL MOUNTED BARN DOOR KITS
Barn Door Kit Options Available
78 3/4 in (2000 mm) 17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
Tracks available 78 3/4 in (2000 mm)
WALL MOUNTED BARN DOOR KITS
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
96 in (2438 mm) 17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
96 in (2438 mm)
Replacement Hardware, Spare Parts & Accessories 17 11/16 in (450 mm)
DESCRIPTION
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
17 11/16 in (450 mm)
PART NUMBER
FINISH
CONTENTS / PKG
Straight Strap Hanger
BD550-SS
Stainless Steel
x1 Strap & Mounting Hardware
Straight Strap Hanger
BD550-MB
Matt Black
x1 Strap & Mounting Hardware
Straight Strap Hanger
BD550-BR
Bronze
x1 Strap & Mounting Hardware
Top Strap Hanger
BD551-SS
Stainless Steel
x1 Strap & Mounting Hardware
Top Strap Hanger
BD551-MB
Matt Black
x1 Strap & Mounting Hardware
Top Strap Hanger
BD551-BR
Bronze
x1 Strap & Mounting Hardware
Bent Strap Hanger
BD552-SS
Stainless Steel
x1 Strap & Mounting Hardware
Bent Strap Hanger
BD552-MD
Matt Black
x1 Strap & Mounting Hardware
Bent Strap Hanger
BD552-BR
Bronze
x1 Strap & Mounting Hardware
1 3/8" Strap Bolt
BD130-SS
Stainless Steel
x1 1 3/8" Strap Bolt & Mounting Hardware
1 3/8" Strap Bolt
BD130-MBBR
Matt Black/Bronze
x1 1 3/8" Strap Bolt & Mounting Hardware
1 3/4" Strap Bolt
BD133-SS
Stainless Steel
x1 1 3/4" Strap Bolt & Mounting Hardware
1 3/4" Strap Bolt
BD133-MBBR
Matt Black/Bronze
x1 1 3/4" Strap Bolt & Mounting Hardware
96" Track
BD5000-09600-SS
Stainless Steel
x1 Track (Wall Spacer Hardware Sold Separately)
96" Track
BD5000-09600-MB
Matt Black
x1 Track (Wall Spacer Hardware Sold Separately)
96" Track
BD5000-09600-BR
Bronze
x1 Track (Wall Spacer Hardware Sold Separately)
Wall Spacer
BD350-SS
Stainless Steel
x1 Spacer
Wall Spacer
BD350-MB
Matt Black
x1 Spacer
Wall Spacer
BD350-BR
Bronze
x1 Spacer
Bolt for Wall Spacer
BD136-SS
Stainless Steel
x1 Bolt & Mounting Hardware
Bolt for Wall Spacer
BD136-MBBR
Matt Black/Bronze
x1 Bolt & Mounting Hardware
Track Stops (Left or Right)
BD850-SS
Stainless Steel
x1 Left or x1 Right Track Stop & Adjustment Allen Key
Track Stops (Left or Right)
BD850-MB
Matt Black
x1 Left or x1 Right Track Stop & Adjustment Allen Key
Track Stops (Left or Right)
BD850-BR
Bronze
x1 Left or x1 Right Track Stop & Adjustment Allen Key
Track Joiner for Bi-Parting Doors
BD125-SS
Stainless Steel
x1 Track Joiner & Mounting Hardware
Track Joiner for Bi-Parting Doors
BD125-MB
Matt Black
x1 Track Joiner & Mounting Hardware
Track Joiner for Bi-Parting Doors
BD125-BR
Bronze
x1 Track Joiner & Mounting Hardware
Door Latch
BD250 -SS
Stainless Steel
x1 Latch & Mounting Hardware
Door Latch
BD250-MB
Matt Black
x1 Latch & Mounting Hardware
Door Latch
BD250-BR
Bronze
x1 Latch & Mounting Hardware
Wall Mount Guide & Double Floor Guides (No Dado)
99161
White Nylon
x1 Wall Mount Guide, x2 Floor Guides & Mounting Hardware
Single Floor Guide (Dado)
BD750
Black Nylon
x1 Floor Guide & Mounting Hardware
Anti-Jump Blocks
BD790
Black Nylon
x2 Anti-Jump Blocks & Mounting Hardware
Handle & Pull Combination
BD470-SS
Stainless Steel
x1 Handle & x1 Pull Combination
Handle & Pull Combination
BD470-MB
Matt Black
x1 Handle & x1 Pull Combination
Handle & Pull Combination
BD470-BR
Bronze
x1 Handle & x1 Pull Combination
Pull
BD460-SS
Stainless Steel
x1 Pull
Pull
BD460-MB
Matt Black
x1 Pull
Pull
BD460-BR
Bronze
x1 Pull
Handle
BD450-SS
Stainless Steel
x1 Handle
Handle
BD450-MB
Matt Black
x1 Handle
Handle
BD450-BR
Bronze
x1 Handle
