Dymo LabelManager 160 Batteries Replacement
Dymo LabelManager 160 Batteries Replacement
Dymo LabelManager 160 Batteries Replacement This guide provides steps to replace the batteries of your label-maker.
Written By: William Ross Herring
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Dymo LabelManager 160 Batteries Replacement
INTRODUCTION If your device does not power on, you may need to replace the batteries. This guide provides the requisite instructions.
PARTS: AAA Battery (6)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Dymo LabelManager 160 Batteries Replacement
Step 1 — Batteries
Place the device face-down to access the battery compartment.
Remove the compartment cover to reveal the batteries. Remove the 6 old batteries.
Step 2
Your device is now fully charged. Enjoy! This document was last generated on 2017-06-18 11:15:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Dymo LabelManager 160 Batteries Replacement This guide provides steps to replace the batteries of your label-maker.
Written By: William Ross Herring
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Dymo LabelManager 160 Batteries Replacement
INTRODUCTION If your device does not power on, you may need to replace the batteries. This guide provides the requisite instructions.
PARTS: AAA Battery (6)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Dymo LabelManager 160 Batteries Replacement
Step 1 — Batteries
Place the device face-down to access the battery compartment.
Remove the compartment cover to reveal the batteries. Remove the 6 old batteries.
Step 2
Your device is now fully charged. Enjoy! This document was last generated on 2017-06-18 11:15:03 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
