submittal review
submittal review Date: August 16, 2016 Project: Gardner Edgerton Advanced Technical Center We have reviewed the following items: ܆Attached Copies
Description
PKMR# 15.431
Returned By: ܆Electronically ܆Courier ܆Mail/UPS
Floor/roof drains
1
PEARSON KENT McKINLEY RAAF ENGINEERS, LLC ENGINEER’S SUBMITTAL REVIEW STAMP
܆ ܆ ܆ ܆
REVIEWED – NO EXCEPTIONS TAKEN FURNISH AS NOTED OR CORRECTED REVISE & RESUBMIT INDICATED ITEMS ONLY REVISE & RESUBMIT ENTIRE SUBMITTAL
܆REJECTED, RESUBMIT ܆SUBMIT THE SPECIFIED ITEM(S) ܆REVIEWED FOR INFORMATION ONLY ܆REFER / RESPOND TO ATTACHED COMMENTS
Corrections or comments made on these submittals and/or shop drawings during this review do not relieve the contractor from compliance with the requirements of the contract documents, including the drawings and specifications. This check is only for review of general conformance with the design concept of the project and general compliance with the information given in the contract documents prepared by Pearson Kent McKinley Raaf Engineers, LLC. The contractor is still responsible for confirming and correlating all quantities and dimensions, selecting all fabrication processes and techniques of construction, coordinating their work with that of all other contractors, and performing their work in a safe and satisfactory manner.
Date
08/16/16
By:
ke
GENERAL COMMENTS: (Fully review submittal for additional specific comments in document)
1.) TD-1 - Verify grate is heavy duty and is traffic rated.
SUBMITTAL TRANSMITTAL FORM
Universal Construction Co., Inc.
BID PACKAGE NO:
180
11200 West 79th Street Lenexa, KS 66214
Project: Submittal Type: Title: Contractor: Manufacturer:
Gardner Edgerton Tech
Submittal#
---------------------
Product Data / Specifications
Section#
---------------------
Drainage Products
Plumbing By Fisher
221319 ------------------------
Sequence # ________________________
-----------------------------------------
180
------------------------
Resubmittal Character:
------------------------
Wade
----------------------
Date UCC Received from Contractor
8/10/16
150013 180
Date Sent to Design Team
8/10/16
SM 8/10/16
XX
UCC's review is in the capacity of the Construction Manager. This submittal is not considered a returned submittal until the Architect/Engineer has added their stamp and comments.
Date Returned back to
ucc
Date Returned to Contractor
Plumbing Submittals Gardner Edgerton Advanced Technical Center 425 Waverly Road Gardner, Kansas 66030
******* Specification Section # 221319 Sanitary Waste Piping Specialties Drainage Products
Plumbing By Fisher 15150 South Keeler Street Olathe, Kansas 66062 913-829-1971 Office
FD-1 Floor Drain FLOOR & AREA DRAINS 1100-A Floor Drain with Round Adjustable Top – Perforated Grate Regularly Furnished: Painted cast iron floor drain body with anchor flange, seepage openings, reversible clamping collar, adjustable top, secured perforated grate, ½” NPT trap primer tap (plugged) and bottom outlet. ASME Load Rating = L.D. (Light Duty) Under 2,000 Lbs.
Top
F
Size
Min
5 (127) 6 (152)
Min
1-7/16 (37)
2-1/8 (54)
15/16 (24)
1-5/8 (41)
1-1/2 (38)
2-3/8 (60)
1 (25)
1-3/4 (44)
7 (178)
1-3/8 (35)
2-1/4 (57)
1 (25)
1-3/4 (44)
8 (203)
1-3/8 (35)
2-1/4 (57)
1 (25)
1-5/8 (41)
10 (254)
1-7/8 (48)
3-1/4 (83)
1-5/8 (41)
2-5/8 (67)
Top Size & Type
Outlet Size In.
Grate Free Area (Sq.In.)
A5 A6 A7 A8 A10
2,3,4,6 2,3,4,6 2,3,4,6 2,3,4,6 2,3,4,6
5.8 7.7 10.6 14.0 32.2
Suffix
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-85
Satin Finish 304 Stainless Steel Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk Threaded
2NH, 3NH, 4NH,6NH 2TY, 3TY, 4TY 2IC, 3IC, 4IC 2IPS, 3IPS, 4IPS Funnels
Suffix
Description
-EF4 -EF6 -EG8
4” Round Funnel Assembly 6” Round Funnel Assembly 8” Elongated Funnel Assembly
Max
Options
Top Material
G Max
Suffix
Description
-ARC -DC -DIA -SO -TSD -X -8 -18 -27 -31 -33 -39 -83 -94 -102
Acid Resistant Coating (C.I. Parts) Debris Cover Deck Installation Assembly 90° Side Outlet (No-Hub Only) Trap Seal Device (Model 4405) Heavy Duty Grate (A5 Only) Secondary Strainer Solid Cover Sediment Bucket Backwater Valve Closure Plug Galvanized Iron Parts Special Engraving Extension Adapter Chrome Plated Top Assembly
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
1100-A
FD-2 Floor Drain FLOOR & AREA DRAINS 2340
Floor Drain with Square Adjustable Top – Slotted Grate
Regularly Furnished: Painted cast iron floor drain with anchor flange, seepage openings, clamping collar, ductile iron slotted grate, medium sump body, adjustable collar, ½” NPT trap primer tap (plugged) and bottom outlet. ASME Load Rating = S.D. (Special Duty) Over 10,000 Lbs.
Top Material
Suffix
Description
-1
Satin Finish Nickel Bronze Veneer
-2
Satin Finish Bronze Veneer
-12
Ductile Iron
-102
Polished Chrome Plated Brass Veneer
-304
Satin Finish 304 Stainless Steel Veneer Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk
2NH, 3NH, 4NH, 6NH, 8NH 2TY, 3TY, 4TY, 6TY, 6TX(PVC) 3IC, 4IC,6IC,8IC
Options
Suffix
Description
-ARC -SO -TSD -VP -8 -11 -14 -18 -19 -23 -27 -31 -39 -123
Acid Resistant Coating (C.I. Parts) 90 Deg. Side Outlet (3TY-6TY, 6TX) Trap Seal Device (Model 4405) Vandal Proof Secured Grate Secondary Strainer Heel Proof Grate Hinged Grate Solid Cover Hinged Locking Grate Grate Riser (2” High) Sediment Bucket Backwater Valve (2,3,4” Only) Galvanized Iron Parts Stainless Steel Mesh Lined Bucket
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
2340
TD-1 Trench Drain
TD-1 Trench Drain Standard PolyDrain – 2502
Precast Trench Drain 4" ID w Ductile Iron Grates Standard Specification System ID#: PD 2502 Trench drain shall be PolyDrain; manufactured by ABT, Inc., 259 Murdock Road, Troutman, NC - (800) 438-6057. www.abtdrains.com
System Components: Precast Trench Drain - The precast trench shall be manufactured using polyester polymer concrete with the following material properties when tested: Property ASTM Compressive Strength Bending Strength Tensile Strength Moisture Absorption Chemical Resistance Freeze/Thaw w/o weight loss Resistance to Fungi UL/ULC Listed- Flame Spread
Test Method ASTM C579 ASTM C580 ASTM C307 ASTM C140 ASTM C267 ASTM C666 ASTM G21 UL-723
Value 17,000 psi Minimum 4,000 psi Minimum 2,000 psi Minimum 0.2% Maximum Pass 1,600 Number of Cycles Minimum Zero (0) Rating Mold Growth Class A
The trench consisting of 39.19” (1 meter) or 19.56” (1/2 meter) channels with nominal 6” (155mm) outside width, 4 “ (100mm) inside width. Pre-sloped channels shall have a standard slope of 0.6% with radius bottom. Non-sloping channels must have written approval by engineer prior to installation. Channels shall have tongue and groove joints. Grate lock down slots shall have polyethylene vibration dampening inserts. All channels must have full length anchoring ribs for a positive mechanical lock with the surrounding concrete.
Sidewall Extensions – Sidewall extensions for channels may be used for hydraulic performance or to maintain the standard slope of 0.6% in greater trench run lengths. Sidewall extensions shall be composed of similar material and thickness as the channels and shall have tongue and groove joints.
Grating #2502: Epoxy coated ductile iron conforming to ASTM A-536 with a minimum of 0.21Ft2 /L Ft (.064m2/Lm) open area. Grates shall meet a minimum 620 psi proof load per AASHTO M-306 test modified by utilizing a 9” x 3” load plate. Grates shall seat into channels without rocking and shall be locked to the channel using a zinc plated steel 5/16 – 18 UNC bolt and zinc plated steel toggle bar system with a bolt torque of 10in/lb. Grates shall be made in U.S.A., and shall conform to the FHWA's "Buy America" policy 23 CFR 635.410(b) and Federal Acquisitions Regulations (FAR) 52.225 “Buy American Act”.
Quality Assurance: Submittals: A Certificate of Compliance in conformance with the provisions of these Standard Specifications shall be furnished to the Engineer. Grates shall be independently tested to AASHTO M-306.
Advanced Building Technologies
259 Murdock Rd. Troutman, NC 28166
PH: 800-438-6057 FX: 704-528-5478
RD-1 Roof Drain ROOF DRAINS 3000
Primary Roof Drain
Regularly Furnished: Painted cast iron primary roof drain with flange, combination membrane flashing clamp / gravel guard, medium sump body, mushroom dome and bottom outlet.
Options
Top Material
Suffix
Description
-3
Bronze Dome
-32
Polypropylene Dome
-42
Cast Iron Dome
-46
Aluminum Dome Outlet Variations
Type
Designation
No-Hub Push On Inside Caulk Threaded
2NH, 3NH, 4NH, 5NH, 6NH, 8NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC, 6IC, 8IC 2IPS, 3IPS, 4IPS, 5IPS, 6IPS, 8IPS Extensions
Suffix
-ADF -AE -DF -EB
Description
Adjustable Extension Adjustable Drain Riser Fixed Extension (Specify 1”,2”,3”,4”) Adjustable Drain Extension Flange
Suffix
Description
-ARC -AW -D -DFS -DP -E -SO -SD -VP -39 -48 -49 -50 -52 -53 -189
Acid Resistant Coating (C.I. Parts) Adjustable Water Level Regulator 2” High Overflow Dam Perforated Stainless Steel Extension Perforated Stainless Steel Gravel Stop Elastomeric Flange 90 Deg. Side Outlet - 3TY,4TY,6TY,6TX Adjustable Internal Overflow Standpipe Vandal Proof Secured Grate Galvanized Iron Parts Flush Grate Bronze Mesh Lined Dome Stainless Steel Mesh Lined Dome Bearing Pan (Sump Receiver) Under Deck Clamp Bearing Pan w/ Securing Package
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
3000
ORD-1 Overflow Roof Drain ROOF DRAINS 3000
Primary Roof Drain
Regularly Furnished: Painted cast iron primary roof drain with flange, combination membrane flashing clamp / gravel guard, medium sump body, mushroom dome and bottom outlet.
Options
Top Material
Suffix
Description
-3
Bronze Dome
-32
Polypropylene Dome
-42
Cast Iron Dome
-46
Aluminum Dome Outlet Variations
Type
Designation
No-Hub Push On Inside Caulk Threaded
2NH, 3NH, 4NH, 5NH, 6NH, 8NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC, 6IC, 8IC 2IPS, 3IPS, 4IPS, 5IPS, 6IPS, 8IPS Extensions
Suffix
-ADF -AE -DF -EB
Description
Adjustable Extension Adjustable Drain Riser Fixed Extension (Specify 1”,2”,3”,4”) Adjustable Drain Extension Flange
Suffix
Description
-ARC -AW -D -DFS -DP -E -SO -SD -VP -39 -48 -49 -50 -52 -53 -189
Acid Resistant Coating (C.I. Parts) Adjustable Water Level Regulator 2” High Overflow Dam Perforated Stainless Steel Extension Perforated Stainless Steel Gravel Stop Elastomeric Flange 90 Deg. Side Outlet - 3TY,4TY,6TY,6TX Adjustable Internal Overflow Standpipe Vandal Proof Secured Grate Galvanized Iron Parts Flush Grate Bronze Mesh Lined Dome Stainless Steel Mesh Lined Dome Bearing Pan (Sump Receiver) Under Deck Clamp Bearing Pan w/ Securing Package
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
3000
DSN-1 Downspout Nozzle ROOF DRAINS 3940-NH Downspout Nozzle Regularly Furnished: Cast downspout nozzle with securing flange and no-hub side inlet.
Pipe Size
Dimensions (in/mm) A
B
C
D
2” (50)
2-3/8 (60)
5/16 (8)
4-3/8 (111)
4 (101)
2 (51)
5/16 (8)
3” (75)
3 (76)
5/16 (8)
5-3/8 (137)
5 (127)
2 (51)
5/16 (8)
Suffix
4” (100)
3-1/2 (89)
5/16 (8)
6-1/4 (159)
6 (151)
2 (51)
5/16 (8)
3-1/2 (89)
1/2 (13)
8 (203)
7-1/2 (191)
2-1/2 (64)
7/16 (11)
6” (150)
3-1/2 (89)
1/2 (13)
9 (229)
8-1/2 (217)
2-1/2 (64)
7/16 (11)
8” (200)
3-1/2 (89)
1/2 (13)
11-1/8 (283)
10-9/16 (269)
2-1/2 (64)
7/16 (11)
10” (250)
3-1/2 (89)
1/2 (13)
13-1/2 (343)
12-7/8 (325)
2-1/2 (64)
7/16 (11)
12” (300)
3-1/2 (89)
1/2 (13)
15-3/8 (391)
14-3/4 (375)
2-1/2 (64)
7/16 (11)
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-3 -102
M
5” (125)
Top Material
L
Rough Bronze
Options
Suffix
Description
-166
Stainless Steel Bird / Rodent Screen
No-Hub
2NH, 3NH,4NH, 5NH, 6NH,8NH,10NH,12NH
Outlet Variations
Polished Chrome Plated Bronze
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
3940-NH
CO-1 Cleanout - Concrete Floor CLEANOUTS & ACCESS COVERS 6000
Adjustable Round Floor Cleanout
Regularly Furnished: Painted cast iron floor cleanout with anchor flange, adjustable top, secured scoriated cover, adjustable ABS plastic housings, ABS plastic gasketed plug and bottom outlet. ASME Load Rating = L.D. (Light Duty) Under 2,000 Lbs (Bronze Tops) - S.D. (Special Duty) Over 10,000 Lbs (D.I. Tops)
Pipe
Top Material
Suffix
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-12
Painted Ductile Iron
-85
Satin Finish 304 Stainless Steel
-102
Polished Chrome Plated Brass Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk
2NH, 3NH, 4NH,5NH, 6NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC
Flow Rate
Dimensions In(mm)
Number
GPM
LPM
B
C
2” (50)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
3” (75)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
4” (100)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
6-1/2 (165)
5” (125)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
N/A
6” (150)
4-3/8 (111)
2-5/8 (67)
4-1/4 (108)
N/A
Options
Suffix
Description
-ARC -VP -39 -75 -83
Acid Resistant Coating (C.I. Parts) Vandal Proof Security Screws Galvanized Cast Iron Bronze Plug Special Marking on Cover Top Variations
-CF -CM -E -S -T -TS -U -US -X
Carpet Flange Carpet Marker Elastomeric Flange Square Top Round Top Recessed for Tile Square Top Recessed for Tile Round Top Recessed for Terrazzo Square Top Recessed for Terrazzo Heavy Duty Top (Standard on -12)
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
6000
CO-2 Floor Cleanout - Epoxy Floor CLEANOUTS & ACCESS COVERS 6000
Adjustable Round Floor Cleanout
Regularly Furnished: Painted cast iron floor cleanout with anchor flange, adjustable top, secured scoriated cover, adjustable ABS plastic housings, ABS plastic gasketed plug and bottom outlet. ASME Load Rating = L.D. (Light Duty) Under 2,000 Lbs (Bronze Tops) - S.D. (Special Duty) Over 10,000 Lbs (D.I. Tops)
Pipe
Top Material
Suffix
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-12
Painted Ductile Iron
-85
Satin Finish 304 Stainless Steel
-102
Polished Chrome Plated Brass Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk
2NH, 3NH, 4NH,5NH, 6NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC
Flow Rate
Dimensions In(mm)
Number
GPM
LPM
B
C
2” (50)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
3” (75)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
4” (100)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
6-1/2 (165)
5” (125)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
N/A
6” (150)
4-3/8 (111)
2-5/8 (67)
4-1/4 (108)
N/A
Options
Suffix
Description
-ARC -VP -39 -75 -83
Acid Resistant Coating (C.I. Parts) Vandal Proof Security Screws Galvanized Cast Iron Bronze Plug Special Marking on Cover Top Variations
-CF -CM -E -S -T -TS -U -US -X
Carpet Flange Carpet Marker Elastomeric Flange Square Top Round Top Recessed for Tile Square Top Recessed for Tile Round Top Recessed for Terrazzo Square Top Recessed for Terrazzo Heavy Duty Top (Standard on -12)
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
6000
Description
PKMR# 15.431
Returned By: ܆Electronically ܆Courier ܆Mail/UPS
Floor/roof drains
1
PEARSON KENT McKINLEY RAAF ENGINEERS, LLC ENGINEER’S SUBMITTAL REVIEW STAMP
܆ ܆ ܆ ܆
REVIEWED – NO EXCEPTIONS TAKEN FURNISH AS NOTED OR CORRECTED REVISE & RESUBMIT INDICATED ITEMS ONLY REVISE & RESUBMIT ENTIRE SUBMITTAL
܆REJECTED, RESUBMIT ܆SUBMIT THE SPECIFIED ITEM(S) ܆REVIEWED FOR INFORMATION ONLY ܆REFER / RESPOND TO ATTACHED COMMENTS
Corrections or comments made on these submittals and/or shop drawings during this review do not relieve the contractor from compliance with the requirements of the contract documents, including the drawings and specifications. This check is only for review of general conformance with the design concept of the project and general compliance with the information given in the contract documents prepared by Pearson Kent McKinley Raaf Engineers, LLC. The contractor is still responsible for confirming and correlating all quantities and dimensions, selecting all fabrication processes and techniques of construction, coordinating their work with that of all other contractors, and performing their work in a safe and satisfactory manner.
Date
08/16/16
By:
ke
GENERAL COMMENTS: (Fully review submittal for additional specific comments in document)
1.) TD-1 - Verify grate is heavy duty and is traffic rated.
SUBMITTAL TRANSMITTAL FORM
Universal Construction Co., Inc.
BID PACKAGE NO:
180
11200 West 79th Street Lenexa, KS 66214
Project: Submittal Type: Title: Contractor: Manufacturer:
Gardner Edgerton Tech
Submittal#
---------------------
Product Data / Specifications
Section#
---------------------
Drainage Products
Plumbing By Fisher
221319 ------------------------
Sequence # ________________________
-----------------------------------------
180
------------------------
Resubmittal Character:
------------------------
Wade
----------------------
Date UCC Received from Contractor
8/10/16
150013 180
Date Sent to Design Team
8/10/16
SM 8/10/16
XX
UCC's review is in the capacity of the Construction Manager. This submittal is not considered a returned submittal until the Architect/Engineer has added their stamp and comments.
Date Returned back to
ucc
Date Returned to Contractor
Plumbing Submittals Gardner Edgerton Advanced Technical Center 425 Waverly Road Gardner, Kansas 66030
******* Specification Section # 221319 Sanitary Waste Piping Specialties Drainage Products
Plumbing By Fisher 15150 South Keeler Street Olathe, Kansas 66062 913-829-1971 Office
FD-1 Floor Drain FLOOR & AREA DRAINS 1100-A Floor Drain with Round Adjustable Top – Perforated Grate Regularly Furnished: Painted cast iron floor drain body with anchor flange, seepage openings, reversible clamping collar, adjustable top, secured perforated grate, ½” NPT trap primer tap (plugged) and bottom outlet. ASME Load Rating = L.D. (Light Duty) Under 2,000 Lbs.
Top
F
Size
Min
5 (127) 6 (152)
Min
1-7/16 (37)
2-1/8 (54)
15/16 (24)
1-5/8 (41)
1-1/2 (38)
2-3/8 (60)
1 (25)
1-3/4 (44)
7 (178)
1-3/8 (35)
2-1/4 (57)
1 (25)
1-3/4 (44)
8 (203)
1-3/8 (35)
2-1/4 (57)
1 (25)
1-5/8 (41)
10 (254)
1-7/8 (48)
3-1/4 (83)
1-5/8 (41)
2-5/8 (67)
Top Size & Type
Outlet Size In.
Grate Free Area (Sq.In.)
A5 A6 A7 A8 A10
2,3,4,6 2,3,4,6 2,3,4,6 2,3,4,6 2,3,4,6
5.8 7.7 10.6 14.0 32.2
Suffix
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-85
Satin Finish 304 Stainless Steel Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk Threaded
2NH, 3NH, 4NH,6NH 2TY, 3TY, 4TY 2IC, 3IC, 4IC 2IPS, 3IPS, 4IPS Funnels
Suffix
Description
-EF4 -EF6 -EG8
4” Round Funnel Assembly 6” Round Funnel Assembly 8” Elongated Funnel Assembly
Max
Options
Top Material
G Max
Suffix
Description
-ARC -DC -DIA -SO -TSD -X -8 -18 -27 -31 -33 -39 -83 -94 -102
Acid Resistant Coating (C.I. Parts) Debris Cover Deck Installation Assembly 90° Side Outlet (No-Hub Only) Trap Seal Device (Model 4405) Heavy Duty Grate (A5 Only) Secondary Strainer Solid Cover Sediment Bucket Backwater Valve Closure Plug Galvanized Iron Parts Special Engraving Extension Adapter Chrome Plated Top Assembly
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
1100-A
FD-2 Floor Drain FLOOR & AREA DRAINS 2340
Floor Drain with Square Adjustable Top – Slotted Grate
Regularly Furnished: Painted cast iron floor drain with anchor flange, seepage openings, clamping collar, ductile iron slotted grate, medium sump body, adjustable collar, ½” NPT trap primer tap (plugged) and bottom outlet. ASME Load Rating = S.D. (Special Duty) Over 10,000 Lbs.
Top Material
Suffix
Description
-1
Satin Finish Nickel Bronze Veneer
-2
Satin Finish Bronze Veneer
-12
Ductile Iron
-102
Polished Chrome Plated Brass Veneer
-304
Satin Finish 304 Stainless Steel Veneer Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk
2NH, 3NH, 4NH, 6NH, 8NH 2TY, 3TY, 4TY, 6TY, 6TX(PVC) 3IC, 4IC,6IC,8IC
Options
Suffix
Description
-ARC -SO -TSD -VP -8 -11 -14 -18 -19 -23 -27 -31 -39 -123
Acid Resistant Coating (C.I. Parts) 90 Deg. Side Outlet (3TY-6TY, 6TX) Trap Seal Device (Model 4405) Vandal Proof Secured Grate Secondary Strainer Heel Proof Grate Hinged Grate Solid Cover Hinged Locking Grate Grate Riser (2” High) Sediment Bucket Backwater Valve (2,3,4” Only) Galvanized Iron Parts Stainless Steel Mesh Lined Bucket
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
2340
TD-1 Trench Drain
TD-1 Trench Drain Standard PolyDrain – 2502
Precast Trench Drain 4" ID w Ductile Iron Grates Standard Specification System ID#: PD 2502 Trench drain shall be PolyDrain; manufactured by ABT, Inc., 259 Murdock Road, Troutman, NC - (800) 438-6057. www.abtdrains.com
System Components: Precast Trench Drain - The precast trench shall be manufactured using polyester polymer concrete with the following material properties when tested: Property ASTM Compressive Strength Bending Strength Tensile Strength Moisture Absorption Chemical Resistance Freeze/Thaw w/o weight loss Resistance to Fungi UL/ULC Listed- Flame Spread
Test Method ASTM C579 ASTM C580 ASTM C307 ASTM C140 ASTM C267 ASTM C666 ASTM G21 UL-723
Value 17,000 psi Minimum 4,000 psi Minimum 2,000 psi Minimum 0.2% Maximum Pass 1,600 Number of Cycles Minimum Zero (0) Rating Mold Growth Class A
The trench consisting of 39.19” (1 meter) or 19.56” (1/2 meter) channels with nominal 6” (155mm) outside width, 4 “ (100mm) inside width. Pre-sloped channels shall have a standard slope of 0.6% with radius bottom. Non-sloping channels must have written approval by engineer prior to installation. Channels shall have tongue and groove joints. Grate lock down slots shall have polyethylene vibration dampening inserts. All channels must have full length anchoring ribs for a positive mechanical lock with the surrounding concrete.
Sidewall Extensions – Sidewall extensions for channels may be used for hydraulic performance or to maintain the standard slope of 0.6% in greater trench run lengths. Sidewall extensions shall be composed of similar material and thickness as the channels and shall have tongue and groove joints.
Grating #2502: Epoxy coated ductile iron conforming to ASTM A-536 with a minimum of 0.21Ft2 /L Ft (.064m2/Lm) open area. Grates shall meet a minimum 620 psi proof load per AASHTO M-306 test modified by utilizing a 9” x 3” load plate. Grates shall seat into channels without rocking and shall be locked to the channel using a zinc plated steel 5/16 – 18 UNC bolt and zinc plated steel toggle bar system with a bolt torque of 10in/lb. Grates shall be made in U.S.A., and shall conform to the FHWA's "Buy America" policy 23 CFR 635.410(b) and Federal Acquisitions Regulations (FAR) 52.225 “Buy American Act”.
Quality Assurance: Submittals: A Certificate of Compliance in conformance with the provisions of these Standard Specifications shall be furnished to the Engineer. Grates shall be independently tested to AASHTO M-306.
Advanced Building Technologies
259 Murdock Rd. Troutman, NC 28166
PH: 800-438-6057 FX: 704-528-5478
RD-1 Roof Drain ROOF DRAINS 3000
Primary Roof Drain
Regularly Furnished: Painted cast iron primary roof drain with flange, combination membrane flashing clamp / gravel guard, medium sump body, mushroom dome and bottom outlet.
Options
Top Material
Suffix
Description
-3
Bronze Dome
-32
Polypropylene Dome
-42
Cast Iron Dome
-46
Aluminum Dome Outlet Variations
Type
Designation
No-Hub Push On Inside Caulk Threaded
2NH, 3NH, 4NH, 5NH, 6NH, 8NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC, 6IC, 8IC 2IPS, 3IPS, 4IPS, 5IPS, 6IPS, 8IPS Extensions
Suffix
-ADF -AE -DF -EB
Description
Adjustable Extension Adjustable Drain Riser Fixed Extension (Specify 1”,2”,3”,4”) Adjustable Drain Extension Flange
Suffix
Description
-ARC -AW -D -DFS -DP -E -SO -SD -VP -39 -48 -49 -50 -52 -53 -189
Acid Resistant Coating (C.I. Parts) Adjustable Water Level Regulator 2” High Overflow Dam Perforated Stainless Steel Extension Perforated Stainless Steel Gravel Stop Elastomeric Flange 90 Deg. Side Outlet - 3TY,4TY,6TY,6TX Adjustable Internal Overflow Standpipe Vandal Proof Secured Grate Galvanized Iron Parts Flush Grate Bronze Mesh Lined Dome Stainless Steel Mesh Lined Dome Bearing Pan (Sump Receiver) Under Deck Clamp Bearing Pan w/ Securing Package
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
3000
ORD-1 Overflow Roof Drain ROOF DRAINS 3000
Primary Roof Drain
Regularly Furnished: Painted cast iron primary roof drain with flange, combination membrane flashing clamp / gravel guard, medium sump body, mushroom dome and bottom outlet.
Options
Top Material
Suffix
Description
-3
Bronze Dome
-32
Polypropylene Dome
-42
Cast Iron Dome
-46
Aluminum Dome Outlet Variations
Type
Designation
No-Hub Push On Inside Caulk Threaded
2NH, 3NH, 4NH, 5NH, 6NH, 8NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC, 6IC, 8IC 2IPS, 3IPS, 4IPS, 5IPS, 6IPS, 8IPS Extensions
Suffix
-ADF -AE -DF -EB
Description
Adjustable Extension Adjustable Drain Riser Fixed Extension (Specify 1”,2”,3”,4”) Adjustable Drain Extension Flange
Suffix
Description
-ARC -AW -D -DFS -DP -E -SO -SD -VP -39 -48 -49 -50 -52 -53 -189
Acid Resistant Coating (C.I. Parts) Adjustable Water Level Regulator 2” High Overflow Dam Perforated Stainless Steel Extension Perforated Stainless Steel Gravel Stop Elastomeric Flange 90 Deg. Side Outlet - 3TY,4TY,6TY,6TX Adjustable Internal Overflow Standpipe Vandal Proof Secured Grate Galvanized Iron Parts Flush Grate Bronze Mesh Lined Dome Stainless Steel Mesh Lined Dome Bearing Pan (Sump Receiver) Under Deck Clamp Bearing Pan w/ Securing Package
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
3000
DSN-1 Downspout Nozzle ROOF DRAINS 3940-NH Downspout Nozzle Regularly Furnished: Cast downspout nozzle with securing flange and no-hub side inlet.
Pipe Size
Dimensions (in/mm) A
B
C
D
2” (50)
2-3/8 (60)
5/16 (8)
4-3/8 (111)
4 (101)
2 (51)
5/16 (8)
3” (75)
3 (76)
5/16 (8)
5-3/8 (137)
5 (127)
2 (51)
5/16 (8)
Suffix
4” (100)
3-1/2 (89)
5/16 (8)
6-1/4 (159)
6 (151)
2 (51)
5/16 (8)
3-1/2 (89)
1/2 (13)
8 (203)
7-1/2 (191)
2-1/2 (64)
7/16 (11)
6” (150)
3-1/2 (89)
1/2 (13)
9 (229)
8-1/2 (217)
2-1/2 (64)
7/16 (11)
8” (200)
3-1/2 (89)
1/2 (13)
11-1/8 (283)
10-9/16 (269)
2-1/2 (64)
7/16 (11)
10” (250)
3-1/2 (89)
1/2 (13)
13-1/2 (343)
12-7/8 (325)
2-1/2 (64)
7/16 (11)
12” (300)
3-1/2 (89)
1/2 (13)
15-3/8 (391)
14-3/4 (375)
2-1/2 (64)
7/16 (11)
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-3 -102
M
5” (125)
Top Material
L
Rough Bronze
Options
Suffix
Description
-166
Stainless Steel Bird / Rodent Screen
No-Hub
2NH, 3NH,4NH, 5NH, 6NH,8NH,10NH,12NH
Outlet Variations
Polished Chrome Plated Bronze
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
3940-NH
CO-1 Cleanout - Concrete Floor CLEANOUTS & ACCESS COVERS 6000
Adjustable Round Floor Cleanout
Regularly Furnished: Painted cast iron floor cleanout with anchor flange, adjustable top, secured scoriated cover, adjustable ABS plastic housings, ABS plastic gasketed plug and bottom outlet. ASME Load Rating = L.D. (Light Duty) Under 2,000 Lbs (Bronze Tops) - S.D. (Special Duty) Over 10,000 Lbs (D.I. Tops)
Pipe
Top Material
Suffix
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-12
Painted Ductile Iron
-85
Satin Finish 304 Stainless Steel
-102
Polished Chrome Plated Brass Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk
2NH, 3NH, 4NH,5NH, 6NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC
Flow Rate
Dimensions In(mm)
Number
GPM
LPM
B
C
2” (50)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
3” (75)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
4” (100)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
6-1/2 (165)
5” (125)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
N/A
6” (150)
4-3/8 (111)
2-5/8 (67)
4-1/4 (108)
N/A
Options
Suffix
Description
-ARC -VP -39 -75 -83
Acid Resistant Coating (C.I. Parts) Vandal Proof Security Screws Galvanized Cast Iron Bronze Plug Special Marking on Cover Top Variations
-CF -CM -E -S -T -TS -U -US -X
Carpet Flange Carpet Marker Elastomeric Flange Square Top Round Top Recessed for Tile Square Top Recessed for Tile Round Top Recessed for Terrazzo Square Top Recessed for Terrazzo Heavy Duty Top (Standard on -12)
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
6000
CO-2 Floor Cleanout - Epoxy Floor CLEANOUTS & ACCESS COVERS 6000
Adjustable Round Floor Cleanout
Regularly Furnished: Painted cast iron floor cleanout with anchor flange, adjustable top, secured scoriated cover, adjustable ABS plastic housings, ABS plastic gasketed plug and bottom outlet. ASME Load Rating = L.D. (Light Duty) Under 2,000 Lbs (Bronze Tops) - S.D. (Special Duty) Over 10,000 Lbs (D.I. Tops)
Pipe
Top Material
Suffix
Description
-1
Satin Finish Nickel Bronze
-2
Satin Finish Bronze
-12
Painted Ductile Iron
-85
Satin Finish 304 Stainless Steel
-102
Polished Chrome Plated Brass Outlet Variations
Type
Designation
No-Hub Push-On Inside Caulk
2NH, 3NH, 4NH,5NH, 6NH 2TY, 3TY, 4TY, 5TY, 6TY, 6TX (PVC) 2IC, 3IC, 4IC
Flow Rate
Dimensions In(mm)
Number
GPM
LPM
B
C
2” (50)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
3” (75)
4-1/4 (108)
2-3/8 (60)
4-1/4 (108)
6-1/2 (165)
4” (100)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
6-1/2 (165)
5” (125)
4-1/4 (108)
2-1/2 (64)
4-1/4 (108)
N/A
6” (150)
4-3/8 (111)
2-5/8 (67)
4-1/4 (108)
N/A
Options
Suffix
Description
-ARC -VP -39 -75 -83
Acid Resistant Coating (C.I. Parts) Vandal Proof Security Screws Galvanized Cast Iron Bronze Plug Special Marking on Cover Top Variations
-CF -CM -E -S -T -TS -U -US -X
Carpet Flange Carpet Marker Elastomeric Flange Square Top Round Top Recessed for Tile Square Top Recessed for Tile Round Top Recessed for Terrazzo Square Top Recessed for Terrazzo Heavy Duty Top (Standard on -12)
Wade Specification Drainage Products · 11910 County Road 492, Tyler, TX 75706 · (800) 638-9537
6000
