g7 single-station strength - GymStore.com
Hip_Adductor_0909002.indd 1
9/2/09 9:07 AM
REV. 1.2 PA RT # 0 0 0 0 0 0 0 0 0 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 HIP ADDUCTOR
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
HIP ADDUCTOR PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
MAINTENANCE CHECKLIST
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
68”L X 65”W x 52”H 657 lbs
Shipping weight
597 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/cables/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S74 HIP ADDUCTOR
Step 1 Z17
UNPACKING G7-S74 HIP ADDUCTOR
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and E9576-2 complaint Class S product. Your MATRIX G7-S74 HIP ADDUCTOR is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Item B22 Z06 D37 Z17
Z17
Description Qty Flat Washer(M10) 8 Screw (M10x30L) 8 Spring Washer(M10) 8 Screw (M8x60L) 4
the bolt to bolt down the machine on the ground need to be prepared by the user
CAUTION
The weight of the G7-S74 HIP ADDUCTOR is 358 lbs. (162.4 kg) not including the weight stack. The weight stack tower is packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 239 lbs. (108.4 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
INCLUDED TOOLS REQUIRED FOR ASSEMBLY Cable
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench
B22 D37 Z06
B22 D37
B22 D37
Z06
Z06
B22 D37 Z06
Cable goes into the user frame tube and goes out of the tube
Step 2
If any items are missing please contact your country’s local MATRIX dealer for assistance.
Z31
Z31
Item L39 L33 Z21 Z22 Z23 Z25 Z31
Z31 Z31
0mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Description Flat Washer(M5) Screw (M5x12L) Fixing sleeve Cap Shaft Wave Washer Screw (M8x20L)
Qty 3 3 1 1 1 1 4
160
L33 L39
Z22
Z21
Z25
Z23
Step 5
Step 3
Item Z03 Z34 D36 F21 Z28 Z29
Qty Item Description L39 Flat Washer(M5) 3 L33 Screw (M5x12L) 3 1 Z21 Fixing sleeve 1 Z22 Cap 1 Z23 Shaft 1 Z25 Wave Washer
Description Qty Screw (M8x20L) 4 Flat Washer (M8) 4 Spring Washer (M8) 4 Cable 2 Stopper Plate 2 Screw (M5x12L) 2
L33 L39 Z22 Z21 Z25 Z23 F21 Z29
Z28
Z28
F21
Z29
Z34 D36 Z03
Step 4
Step 6 Item F20 F22 F05 F06 F10 Z05 Z30 B24 F11 F13 B22
Raise up the add a weight plate
Description Qty Cable 1 1 Cable Screw ( φ10xM6x45L) 4 Stopper Plate 1 Flat Washer(M8) 2 1 Screw (M10x105L) Cap 2 1 Nylon Nut(M10) 1 Fixing Block 1 Fixing Block Flat Washer(M10) 4
Item Z01 Z24 Z02 Z07
Qty Description Screw (M10x20L) 10 6 Flat washer Screw (M10x75L) 2 2 Stopper Bolt
Seat Pad Leg Pad Z01 Z24 Z01
hold by pull pin
Z01
Z01
Z07
Z01
B24 Z30 B22
F22 Z05
Z30
F20 F06 F05
F11
Z01 Z24
F05
F13
Back Pad Leg Pad
Z07 Z01 Z24
Z02 Z02
F10
Hip_Adductor_0909002.indd 2
9/2/09 9:07 AM
9/2/09 9:07 AM
REV. 1.2 PA RT # 0 0 0 0 0 0 0 0 0 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 HIP ADDUCTOR
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
HIP ADDUCTOR PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
MAINTENANCE CHECKLIST
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
68”L X 65”W x 52”H 657 lbs
Shipping weight
597 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/cables/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S74 HIP ADDUCTOR
Step 1 Z17
UNPACKING G7-S74 HIP ADDUCTOR
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and E9576-2 complaint Class S product. Your MATRIX G7-S74 HIP ADDUCTOR is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Item B22 Z06 D37 Z17
Z17
Description Qty Flat Washer(M10) 8 Screw (M10x30L) 8 Spring Washer(M10) 8 Screw (M8x60L) 4
the bolt to bolt down the machine on the ground need to be prepared by the user
CAUTION
The weight of the G7-S74 HIP ADDUCTOR is 358 lbs. (162.4 kg) not including the weight stack. The weight stack tower is packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 239 lbs. (108.4 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
INCLUDED TOOLS REQUIRED FOR ASSEMBLY Cable
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench
B22 D37 Z06
B22 D37
B22 D37
Z06
Z06
B22 D37 Z06
Cable goes into the user frame tube and goes out of the tube
Step 2
If any items are missing please contact your country’s local MATRIX dealer for assistance.
Z31
Z31
Item L39 L33 Z21 Z22 Z23 Z25 Z31
Z31 Z31
0mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Description Flat Washer(M5) Screw (M5x12L) Fixing sleeve Cap Shaft Wave Washer Screw (M8x20L)
Qty 3 3 1 1 1 1 4
160
L33 L39
Z22
Z21
Z25
Z23
Step 5
Step 3
Item Z03 Z34 D36 F21 Z28 Z29
Qty Item Description L39 Flat Washer(M5) 3 L33 Screw (M5x12L) 3 1 Z21 Fixing sleeve 1 Z22 Cap 1 Z23 Shaft 1 Z25 Wave Washer
Description Qty Screw (M8x20L) 4 Flat Washer (M8) 4 Spring Washer (M8) 4 Cable 2 Stopper Plate 2 Screw (M5x12L) 2
L33 L39 Z22 Z21 Z25 Z23 F21 Z29
Z28
Z28
F21
Z29
Z34 D36 Z03
Step 4
Step 6 Item F20 F22 F05 F06 F10 Z05 Z30 B24 F11 F13 B22
Raise up the add a weight plate
Description Qty Cable 1 1 Cable Screw ( φ10xM6x45L) 4 Stopper Plate 1 Flat Washer(M8) 2 1 Screw (M10x105L) Cap 2 1 Nylon Nut(M10) 1 Fixing Block 1 Fixing Block Flat Washer(M10) 4
Item Z01 Z24 Z02 Z07
Qty Description Screw (M10x20L) 10 6 Flat washer Screw (M10x75L) 2 2 Stopper Bolt
Seat Pad Leg Pad Z01 Z24 Z01
hold by pull pin
Z01
Z01
Z07
Z01
B24 Z30 B22
F22 Z05
Z30
F20 F06 F05
F11
Z01 Z24
F05
F13
Back Pad Leg Pad
Z07 Z01 Z24
Z02 Z02
F10
Hip_Adductor_0909002.indd 2
9/2/09 9:07 AM
